CB1VF-D-12V [PANASONIC]
Power/Signal Relay, SPDT, Momentary, 0.117A (Coil), 12VDC (Coil), 1400mW (Coil), 1A (Contact), 12VDC (Contact), DC Input, DC Output, PCB Mount-Straight, ROHS COMPLIANT;型号: | CB1VF-D-12V |
厂家: | PANASONIC |
描述: | Power/Signal Relay, SPDT, Momentary, 0.117A (Coil), 12VDC (Coil), 1400mW (Coil), 1A (Contact), 12VDC (Contact), DC Input, DC Output, PCB Mount-Straight, ROHS COMPLIANT PC 光电二极管 继电器 |
文件: | 总11页 (文件大小:5576K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Products with diode inside
are discontinued in 2014.
Automotive relay with ISO
CB RELAYS
terminal arrangement
FEATURES
1. This relay has an ISO (International
Organization for Standardization)
terminal arrangement.
5. Protective element type is also
available.
6. For only plug-in types, types with
nominal switching capacities of 35 A
(12 V) and 15 A (24 V) are available.
Terminals are all solder plated.
*35 A type: Terminal is the plug-in type
(no plating).
2. Relay is compact and high capacity
(40 A).
TYPICAL APPLICATIONS
Compact form factor realized with space
saving 22 26 mm .866 1.024 inch
small base area thanks to integrated
bobbin and base construction. Features
high switching capacity of 40 A
3. Features high thermal resistance of
125C 257F (heat resistant type).
Heat resistant type is available that can
withstand use near engines. (40 A
switching capacity)
1. Automobiles
Headlights, Cell motors, Air conditioners,
ABS, EPS, etc.
2. Construction equipment
3. Agricultural equipment, Conveyor,
etc.
Products to be discontinued.
4. Sealed type available for resisting
adverse environments.
ORDERING INFORMATION
CB
Contact arrangement
1a: 1 Form A
1: 1 Form C
Contact rating
Nil: Standard type
H: High contact capacity type
V: 35 A type
Protective construction
Nil: Sealed type
F: Flux-resistant type
Heat resistant of types
Nil: Standard type
T: Heat resistant type
Protective element
Nil: None
D: with diode inside
R: with resistor inside
Mounting classification
Nil: Plug-in type
P: PC board type
M: Bracket type
Coil voltage (DC)
12V, 24 V
D: with diode inside
ds_61202_en_cb: 030412D
1
CB
Products with diode inside
are discontinued in 2014.
TYPES
1. Standard type
Sealed type
Part No.
Flux-resistant type
Part No.
Contact arrangement
Mounting classification
PC board type
Plug-in type
Nominal coil voltage
12V DC
24V DC
12V DC
24V DC
12V DC
24V DC
12V DC
24V DC
12V DC
24V DC
12V DC
24V DC
12V DC
24V DC
12V DC
24V DC
12V DC
24V DC
CB1a-P-12V
CB1a-P-24V
CB1a-12V
CB1aF-P-12V
CB1aF-P-24V
CB1aF-12V
1 Form A
CB1a-24V
CB1aF-24V
CB1a-M-12V
CB1a-M-24V
CB1-P-12V
CB1-P-24V
CB1-12V
CB1aF-M-12V
CB1aF-M-24V
CB1F-P-12V
CB1F-P-24V
CB1F-12V
Bracket type
PC board type
Plug-in type
1 Form C
CB1-24V
CB1F-24V
CB1-M-12V
CB1-M-24V
CB1aH-P-12V
CB1aH-P-24V
CB1aH-12V
CB1aH-24V
CB1aH-M-12V
CB1aH-M-24V
CB1F-M-12V
CB1F-M-24V
CB1aHF-P-12V
CB1aHF-P-24V
CB1aHF-12V
CB1aHF-24V
CB1aHF-M-12V
CB1aHF-M-24V
Bracket type
PC board type*
Plug-in type
High contact capacity
(1 Form A)
Bracket type
Packing quantity; Carton: 50 pcs. Case: 200 pcs.
Notes: 1. Please use “CBR” to order built-in resistor type and “CBD” to order
2. *Regarding solder, this product is not MIL (Military Standard) compliant. Please evaluate solder mounting by the actual equipment before using.
built-in diode type. (Asterisks “” should be filled in from parts table.)
2. Heat resistant type
Sealed type
Part No.
Flux-resistant type
Part No.
Contact arrangement
Mounting classification
PC board type
Plug-in type
Nominal coil voltage
12V DC
24V DC
12V DC
24V DC
12V DC
24V DC
12V DC
24V DC
12V DC
24V DC
12V DC
24V DC
12V DC
24V DC
12V DC
24V DC
12V DC
24V DC
CB1a-T-P-12V
CB1a-T-P-24V
CB1a-T-12V
CB1aF-T-P-12V
CB1aF-T-P-24V
CB1aF-T-12V
1 Form A
CB1a-T-24V
CB1aF-T-24V
CB1a-T-M-12V
CB1a-T-M-24V
CB1-T-P-12V
CB1-T-P-24V
CB1-T-12V
CB1aF-T-M-12V
CB1aF-T-M-24V
CB1F-T-P-12V
CB1F-T-P-24V
CB1F-T-12V
Bracket type
PC board type
Plug-in type
1 Form C
CB1-T-24V
CB1F-T-24V
CB1-T-M-12V
CB1-T-M-24V
CB1aH-T-P-12V
CB1aH-T-P-24V
CB1aH-T-12V
CB1aH-T-24V
CB1aH-T-M-12V
CB1aH-T-M-24V
CB1F-T-M-12V
CB1F-T-M-24V
CB1aHF-T-P-12V
CB1aHF-T-P-24V
CB1aHF-T-12V
CB1aHF-T-24V
CB1aHF-T-M-12V
CB1aHF-T-M-24V
Bracket type
PC board type*
Plug-in type
High contact capacity
(1 Form A)
Bracket type
Packing quantity; Carton: 50 pcs. Case: 200 pcs.
Notes: 1. Please use “CBR” to order built-in resistor type and “CBD” to order
built-in diode type. (Asterisks “” should be filled in from parts table.)
2. *Regarding solder, this product is not MIL (Military Standard) compliant. Please evaluate solder mounting by the actual equipment before using.
3. 35 A type (*Terminals are all of the plug-in type.)
Sealed type
Part No.
Flux-resistant type
Part No.
Contact arrangement
Nominal coil voltage
12V DC
24V DC
12V DC
24V DC
12V DC
24V DC
12V DC
24V DC
12V DC
24V DC
12V DC
24V DC
CB1aV-12V
CB1aV-24V
CB1V-12V
CB1aVF-12V
CB1aVF-24V
CB1VF-12V
1 Form A
1 Form C
CB1V-24V
CB1VF-24V
CB1aV-R-12V
CB1aV-R-24V
CB1V-R-12V
CB1V-R-24V
CB1aV-D-12V
CB1aV-D-24V
CB1V-D-12V
CB1V-D-24V
CB1aVF-R-12V
CB1aVF-R-24V
CB1VF-R-12V
CB1VF-R-24V
CB1aVF-D-12V
CB1aVF-D-24V
CB1VF-D-12V
CB1VF-D-24V
1 Form A with resistor inside
1 Form C with resistor inside
1 Form A with diode inside
1 Form C with diode inside
Packing quantity; Carton: 50 pcs. Case: 200 pcs.
ds_61202_en_cb: 030412D
2
CB
Products with diode inside
are discontinued in 2014.
RATING
1. Coil data
1) 1. No protective element
Nominal operating
current
(at 20C 68F)
Coil resistance
(10%)
(at 20C 68F)
Nominal operating
power
(at 20C 68F)
Contact
arrangement
Nominal coil
voltage
Pick-up voltage
(Initial, at 20C 68F) (Initial, at 20C 68F)
Drop-out voltage
Usable voltage
range
12V DC
24V DC
3 to 7V DC
1.2 to 4.2V DC
2.4 to 8.4V DC
117mA
75mA
103
320
103
80
411
320
1.4W
1.8W
10 to 16V DC
20 to 32V DC
1 Form A,
1 Form C
6 to 14V DC
117mA
150mA
58mA
1.4W (PC board type)
1.8W
12V DC
24V DC
3 to 7V DC
1.2 to 4.2V DC
2.4 to 8.4V DC
10 to 16V DC
20 to 32V DC
High contact
capacity
(1 Form A)
1.4W (PC board type)
1.8W
6 to 14V DC
75mA
Note: Other pick-up voltage types are also available. Please contact us for details.
2) With resistor inside
Nominal operating
current
(at 20C 68F)
Combined resistance
(10%)
Nominal operating
power
(at 20C 68F)
Contact
arrangement
Nominal coil
voltage
Pick-up voltage
(Initial, at 20C 68F) (Initial, at 20C 68F)
Drop-out voltage
Usable voltage
range
(at 20C 68F)
12V DC
24V DC
3 to 7V DC
1.2 to 4.2V DC
2.4 to 8.4V DC
134mA
84mA
89.5
287.2
1.6W
2.0W
10 to 16V DC
20 to 32V DC
1 Form A,
1 Form C
6 to 14V DC
2. Specifications
1) Standard type (12 V coil voltage)
Characteristics
Item
Specifications
1 Form C
High contact capacity
Arrangement
1 Form A
(1 Form A)
Contact
Contact resistance (Initial)
Contact material
Typ2m (By voltage drop 6 V DC 1 A)
Ag alloy (Cadmium free)
N.O.: 40A 14V DC
N.C.: 30A 14V DC
70A 14V DC (at 20C 68F)
50A 14V DC (at 85C 185F)
Nominal switching capacity (Initial)
40A 14V DC
Max. carrying current (Initial)
(14V DC, at 85C 185F, continuous)
Nominal operating power
Min. switching capacity*1
Initial insulation resistance
N.O.: 40A
1.4W
N.O.: 40A, N.C.: 30A
1.4W
N.O.: 40A
Rating
1.8W (1.4W: PC board type)
1A 12V DC (12V DC), 1A 24V DC (24V DC)
Min. 20 M (at 500 V DC)
Between open contacts
Between contacts and coil
500 Vrms for 1 min. (Detection current: 10mA)
500 Vrms for 1 min. (Detection current: 10mA)
Initial breakdown
voltage
Electrical
characteristics
Operate time (at nominal voltage)
Max. 15ms (at 20C 68F, excluding contact bounce time) (Initial)
(at 20C 68F)
Release time (at nominal voltage)
(at 20C 68F)
Max. 15ms (at 20C 68F, excluding contact bounce time, without diode) (Initial)
Functional
Shock resistance
Min. 200 m/s2 {20G}
Min. 1,000 m/s2 {100G}
Destructive
Mechanical
10 Hz to 500 Hz, Min. 44.1m/s2 {4.5G}
characteristics
Functional
Vibration
resistance
Destructive
10 Hz to 2,000 Hz, Min. 44.1m/s2 {4.5G} Time of vibration for each direction; X. Y. Z direction: 4 hours
Flux-resistant type: Min. 105, Sealed type: Min. 5104 (Operating frequency: 2s ON, 2s OFF)
Min. 106 (at 120 cpm)
Electrical (at nominal switching capacity)
Mechanical
Expected life
Conditions
Standard type; Ambient temp: –40 to +85C –40 to +185F,
Humidity: 5 to 85% R.H. (Not freezing and condensing at low temperature)
Conditions for operation, transport and
storage*2
Heat resistant type; Ambient temp: –40 to +125C –40 to +257F,
Humidity: 5 to 85% R.H. (Not freezing and condensing at low temperature)
Max. operating speed
15 cpm (At nominal switching capacity)
Approx. 33 g 1.16 oz
Unit weight
Notes:
*1This value can change due to the switching frequency, environmental conditions, and desired reliability level, therefore it is recommended to check this with the actual load.
*2The upper operation ambient temperature limit is the maximum temperature that can satisfy the coil temperature rise value. Refer to “6. Usage, Storage and Transport
Conditions“ in AMBIENT ENVIRONMENT section in Relay Technical Information.
2) Standard type (24 V coil voltage)
Characteristics
Item
Specifications
1 Form C
High contact capacity
(1 Form A)
Arrangement
1 Form A
Contact
Contact resistance (Initial)
Contact material
Max. 15m (By voltage drop 6 V DC 1 A)
Ag alloy (Cadmium free)
N.O.: 20A 28V DC
N.C.: 10A 28V DC
Nominal switching capacity (Initial)
20A 28V DC
20A 28V DC
Rating
Max. carrying current (Initial)
(28V DC, at 85C 185F, continuous)
Nominal operating power
20A
N.O.: 20A, N.C.: 10A
1.8W
20A
1.8W
1.8W, 1.4W (PC board type)
Note: All other specifications are the same as those of standard type (12 V coil voltage)
ds_61202_en_cb: 030412D
3
CB
Products with diode inside
are discontinued in 2014.
3) Heat resistant type (12 V and 24 V coil voltage)
Specifications
Characteristics
Item
12V
24V
High contact
High contact
Arrangement
1 Form A
1 Form C
capacity
1 Form A
1 Form C
capacity
(1 Form A)
(1 Form A)
Contact
Contact resistance (Initial)
Contact material
Max. 15m (By voltage drop 6 V DC 1 A)
Ag alloy (Cadmium free)
Nominal switching capacity
(Initial)
N.O.: 40A 14V DC
N.C.: 30A 14V DC
N.O.: 20A 28V DC
N.C.: 10A 28V DC
40A 14V DC
50A 14V DC
40A 14V DC
45A 50A
20A 28V DC
25A 28V DC
20A 28V DC
25A 28V DC
Max. carrying current (Initial)
(at 85C 185F, continuous)*
N.O.: 50A 14V DC
N.C.: 30A 14V DC 14V DC 14V DC
N.O.: 25A 28V DC
N.C.: 10A 28V DC
Rating
1.4W
(PCboard
type)
1.8W,
1.4W
(PC board type)
Nominal operating power
1.4W
1.4W
1.8W
1.8W
1.8W
Notes: 1. All other specifications are the same as those of standard type (12 V coil voltage)
2. *Current value in which carry current is possible when the coil temperature is 180C 356F
4) 35 A type (12 V coil voltage)
Characteristics
Item
Specifications
Arrangement
1 Form A
1 Form C
Contact
Contact resistance (Initial)
Contact material
Typ2m (By voltage drop 6 V DC 1 A)
Ag alloy (Cadmium free)
Nominal switching capacity (Resistive load)
35A 14V DC
N.O.: 35A
N.O.: 35A 14V DC, N.C.: 25A 14V DC
N.O.: 35A, N.C.: 25A
1.4W, 1.6W (with resistor inside)
Max. carrying current (Initial)
(14V DC, at 85C 185F, continuous)
Nominal operating power
Rating
Min. switching capacity (Reference value)*
Initial insulation resistance
1A 12V DC (12V DC), 1A 24V DC (24V DC)
Min. 20 M (at 500 V DC)
Between open contacts
500 Vrms for 1 min. (Detection current: 10mA)
Initial breakdown
voltage
Electrical
characteristics
Between contacts and coil
500 Vrms for 1 min. (Detection current: 10mA)
Operate time (at nominal voltage)
Release time (at nominal voltage)
Max. 15ms (excluding contact bounce time) (Initial)
Max. 15ms (excluding contact bounce time, without diode) (Initial)
Min. 100 m/s2 {10G} (Half-wave pulse of sine wave: 11ms; detection: 10s)
Min. 1,000 m/s2 {100G} (Half-wave pulse of sine wave: 6ms)
10 Hz to 100 Hz, Min. 44.1m/s2 {4.5G} (Detection time: 10s)
10 Hz to 2,000 Hz, Min. 44.1m/s2 {4.5G} Time of vibration for each direction; X. Y. Z direction: 4 hours
Flux-resistant type: Min. 105, Sealed type: Min. 5104 (Operating frequency: 2s ON, 2s OFF)
Min. 106 (at 120 cpm)
Functional
Shock resistance
Destructive
Mechanical
characteristics
Functional
Vibration
resistance
Destructive
Electrical (at nominal switching capacity)
Mechanical
Expected life
Ambient temp: –40C to +85C –40F to +185F
Conditions for operation, transport and storage
Max. operating speed
Humidity: 5% R.H. to 85% R.H. (Not freezing and condensing at low temperature)
Conditions
Unit weight
15 cpm (At nominal switching capacity)
Approx. 26 g .92 oz
Note: * This value can change due to the switching frequency, environmental conditions, and desired reliability level, therefore it is recommended to check this with the actual
load.
5) 35 A type (24 V coil voltage)
Characteristics
Contact
Item
Specifications
Arrangement
1 Form A
1 Form C
Nominal switching capacity (Resistive load)
15A 28V DC
N.O.: 15A 28V DC, N.C.: 8A 28V DC
Max. carrying current
(14V DC, at 85C 185F, continuous)
Rating
N.O.: 15A
N.O.: 15A, N.C.: 8A
Nominal operating power
1.8W, 2.0W (with resistor inside)
Note: All other specifications are the same as those of 35 A type (12 V coil voltage).
ds_61202_en_cb: 030412D
4
CB
Products with diode inside
are discontinued in 2014.
REFERENCE DATA
CB RELAYS (Standard type)
1. Allowable ambient temperature
2. Max. switching capability (Resistive load)
(Standard type)
3. Ambient temperature and operating voltage
range
(Standard type)
150
140
(N.O. side Room temperature)
40
60
50
40
35
120
100
80
20A
30
25
20
15
10
30A
40A
30
20
10
60
105 cycle line
40
20
5
Pick-up voltage
Actual value
(Cold start)
0
(Max. 105 cycle)
90
100 110 120 130 140 150
Applied Coil Voltage, %V
0
0
-40 -20
0
20 40 60 8085 100 120
Ambient temperature, °C
10
20
30
40
50
Switching current, A
Asssumption:
• Maximum mean coil temperature: 180C
• Curves are based on 1.4W (Nominal power consumption of the unsupprressed coil at nominal voltage)
4. Distribution of pick-up and drop-out voltage
Sample: CB1-P-12V, 42pcs.
5. Distribution of operate and release time
Sample: CB1-P-24V, 42pcs.
* Without diode
60
60
Operate time
Pick-up voltage
Release time
Drop-out voltage
50
50
40
30
20
10
40
30
20
10
0
0
1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 6.0
1.01.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 6.0 6.5 7.0
Voltage, V
Operate and release time, ms
6-(1). Electrical life test (Motor free)
Change of pick-up and drop-out voltage
Change of contact resistance
Sample: CB1F-12V, 5pcs.
Load: 25A 14V DC, motor free actual load
Switching frequency: (ON:OFF = 1s:9s)
Ambient temperature: Room temperature
Circuit
6
50
5
40
3
Pick-up voltage
Max.
4
3
2
1
0
Tested sample
X
Min.
Max.
Relay harness
X
20
10
0
Drop-out voltage
Min.
Motor
M
Max.
X
14V DC
Min.
10
0
5
0
5
10
No. of operations, × 104
No. of operations, × 104
Observation of load waveform
with current probe and digital
oscilloscope
Load current waveform
Inrush current: 80A, Steady current: 25A
20A
200ms
ds_61202_en_cb: 030412D
5
CB
Products with diode inside
are discontinued in 2014.
6-(2). Electrical life test (Lamp load)
Change of pick-up and drop-out voltage
Change of contact resistance
Sample: CB1F-12V, 5pcs.
Load: 45/65Wx5 parallel, 14V DC, halogen lamp
actual load
Switching frequency: (ON:OFF = 1s:8s)
Ambient temperature: Room temperature
Circuit
6
5
4
3
2
1
0
50
40
Pick-up voltage
Drop-out voltage
Max.
X
Min.
30
20
10
0
Relay
Halogen lamp 12V 45/65W
Max.
X
Min.
Max.
X
14V DC
Min.
0
10
20
0
10
20
No. of operations, × 104
No. of operations, × 104
Observation of load waveform with
current probe and digital oscilloscope
Load current waveform
Inrush current: 100A, Steady current: 20A
20.5A
200ms
CB RELAYS (High contact capacity type)
1. Allowable ambient temperature
2. Max. switching capability
(High contact capacity type)
3. Ambient temperature and operating voltage
range
(High contact capacity type)
60
50
40
150
140
40
35
30
25
120
30A
100
40A
30
20
Operation range
20
15
10
5
80
50A
60
105 cycle line
10
60A
70A
40
Actual value
(Max. 1 cycle)
Pick-up voltage
(Cold start)
20
90
0
0
0
20
40
60 80 100
100 110 120 130 140 150
Applied Coil Voltage, %V
-40 -20
0
20 40 60 8085 100 120
Ambient temperature, °C
Switching current, A
Asssumption:
• Maximum mean coil temperature: 180C
• Curves are based on 1.4W (Nominal power consumption of the unsupprressed coil at nominal voltage)
4. Distribution of pick-up and drop-out voltage
Sample: CB1aHF-12V, 53pcs.
5. Distribution of operate and release time
Sample: CB1aHF-12V, 53pcs.
6. Contact resistance
Sample: CB1aHF-12V, 53pcs.
(By voltage drop 6V DC 1A)
70
70
60
50
40
30
20
10
0
12
Pick-up voltage
Drop-out voltage
60
50
40
30
20
10
0
10
8
Operate time
6
4
Release time
12
2
0
0
0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 6.0 6.5
Voltage, V
1.0 1.2 1.4 1.6 1.8 2.0 2.2 2.4 2.6 2.8
8
10
14
Resistance, mΩ
Coil voltage, V
ds_61202_en_cb: 030412D
6
CB
Products with diode inside
7-(1). Electrical life test (Motor free)
Sample: CB1aH-12V, 3pcs.
are discontinued in 2014.
Change of pick-up and drop-out voltage
Change of contact resistance
Load: Inrush current: 64A/Steady current: 35A
Fan motor actual load (motor free) 12V DC
Switching frequency: (ON:OFF = 3s:7s)
Ambient temperature: Room temperature
Circuit
10
9
50
40
30
20
10
8
7
6
Pick-up voltage
5
4
Max.
X
3s
7s
Min.
Drop-out voltage
3
Max.
X
Min.
10s
Max.
2
X
Min.
1
0
0
0
5
10
0
5
10
No. of operations, × 104
No. of operations, × 104
M
Load current waveform
Inrush current: 64A, Steady current: 35A
10A
500ms
7-(2). Electrical life test (Motor lock)
Change of pick-up and drop-out voltage
Change of contact resistance
Sample: CB1aH-12V, 5pcs.
Load: 100A 14V DC
6
50
Magnet clutch actual load (lock condition)
Switching frequency: (ON:OFF = 1s:9s)
Ambient temperature: Room temperature
Circuit
Pick-up voltage
5
Max.
X
Min.
40
4
3
30
20
10
0
Max.
X
Min.
2
Drop-out voltage
Clutch
(5V DC
applied)
14V DC
Max.
X
Min.
M
1
0
Lock condition
0
10
20
40
60
80 100
0
10
20
40
60
80 100
No. of operations
No. of operations
Load current waveform
100A 14V DC
20A
200ms
ds_61202_en_cb: 030412D
7
CB
Products with diode inside
are discontinued in 2014.
CB RELAY (35 A type)
1-(1). Distribution of pick-up and drop-out
voltage
1-(2). Distribution of pick-up and drop-out
voltage
1-(3). Distribution of pick-up and drop-out
voltage
Sample: CB1aV-12V, 30pcs.
Sample: CB1aV-24V, 30pcs.
Sample: CB1V-24V, 30pcs.
20
20
30
Pick-up voltage
Drop-out voltage
Pick-up voltage
Drop-out voltage
Pick-up voltage
Drop-out voltage
18
25
16
14
12
10
8
15
20
15
10
5
10
5
6
4
2
00
00 3.5 4.5
0
5.0 5.5 6.0 6.5 7.0 7.5 8.0 8.5 9.0 9.5 10.0 10.5 11.0 11.5
4.0 5.0 6.0 7.0 8.0 9.0 10.0 11.0 12.0 13.0
0
2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5
Voltage, V
11.5 12.5
Voltage, V
Voltage, V
2.-(1) Contact resistance
2.-(2) Contact resistance
2.-(3) Contact resistance
Sample: CB1aV-12V, 30pcs.
(By voltage drop 12 V DC 1A)
Sample: CB1aV-24V, 30pcs.
(By voltage drop 24 V DC 1A)
Sample: CB1V-24V, 30pcs.
(By voltage drop 24 V DC 1A)
25
20
15
10
5
20
25
20
15
10
5
N.C. side
N.O. side
15
10
5
0
0
0
0
1.4
1.6
1.8
2.0
0
1.4 1.6 1.8 2.0 2.2 2.4 2.6 2.8 3.0
0
1.4
1.6
1.8
2.0
Contact resistance, mΩ
Contact resistance, mΩ
Contact resistance, mΩ
3. Electrical life test (Blower fan)
Change of pick-up and drop-out voltage
Change of contact resistance
Sample: CB1aV-D-24V, 3pcs.
Load: Blower fan load 28 V DC
Inrush current: 30 A/Steady current: 10 A
Switching frequency: (ON:OFF = 3s:3s)
Switching cycle: 105
Ambient temperature: 85C
Coil protective element: Diode
Circuit
11
10
50
Max.
X
9
40
30
20
10
0
Pick-up voltage
Min.
8
7
6
5
4
Max.
X
Min.
3
3s
3s
M
Drop-out voltage
Max.
X
Min.
2
1
0
6s
0
5
10
0
5
10
No. of operations, × 104
No. of operations, × 104
Load current waveform
Inrush current: 30 A, Steady current: 10 A
10A
500ms
ds_61202_en_cb: 030412D
8
CB
Products with diode inside
are discontinued in 2014.
DIMENSIONS(mm inch)
Download CADData from our Web site.
1. PC board type
External dimensions
Schematic (Bottom view)
CAD Data
1 Form A
86
30
25.0
.984
87
85
Including diode type,
including resistor type also available
4.5
.177
1.0
.039
2.15
.085
22.0
.866
1 Form C
6.3
.248
86
87a
30
26.0
1.024
87
85
Including diode type,
86
87a
including resistor type also available
8.4
.331
16.8
diode type
.661
30
0.8
87
85
.031
8
2.6
.102
.315
8.4
PC board pattern (Bottom view)
.331
17.9
.705
4(or5)-2.6
4(or5)-.102
1 Form C type only
86
85
8.4
87a
.331
16.8
Dimension:
Max. 1mm .039 inch:
1 to 3mm .039 to .118 inch: 0.2 .008
General tolerance
0.1 .004
.661
30
87
4(or5)-1.4
4(or5)-.055
1 Form C type only
8.0
.315
Min. 3mm .118 inch:
0.3 .012
8.4
.331
17.9
.705
2. Plug-in type * The dimensions are the same as those of 35A type.
CAD Data
External dimensions
Schematic (Bottom view)
1 Form A
86
30
25.0
.984
87
85
4.0
Including diode type,
including resistor type also available
.157
11.0
.433
5-6.3
22.0
.866
1.7 dia.
1 Form C
5-.248
.067 dia.
86
87a
30
26.0
1.024
8.4
87
85
.331
86
87a
Including diode type,
including resistor type also available
16.8
.661
30
0.8
87
85
.031
diode type
2.6
.102
8
.315
8.4
.331
17.9
.705
Dimension:
Max. 1mm .039 inch:
General tolerance
0.1 .004
1 to 3mm .039 to .118 inch: 0.2 .008
Min. 3mm .118 inch: 0.3 .012
ds_61202_en_cb: 030412D
9
CB
Products with diode inside
are discontinued in 2014.
3. Bracket type
External dimensions
Schematic (Bottom view)
CAD Data
4.0 0.1
1 Form A
.157 .004
16.0
.630
1.7
86
30
5.4 0.1 dia.
.213 .004
.067
16.0
6.0
87
85
.630
.236
Including diode type,
including resistor type also available
25.0
.984
1 Form C
86
87a
30
4.0
87
85
.157
11.0
.433
Including diode type,
including resistor type also available
5-6.3
22.0
.866
1.7 dia.
5-.248
.067 dia.
26.0
1.024
diode type
0.8
.031
17.9
.705
8.4
8
.331
.315
8.4
.331
2.6
16.8
.661
.102
Dimension:
Max. 1mm .039 inch:
General tolerance
0.1 .004
1 to 3mm .039 to .118 inch: 0.2 .008
Min. 3mm .118 inch: 0.3 .012
4. High contact capacity (1 Form A) (Plug-in type)
CAD Data
External dimensions
Schematic (Bottom view)
86
30
25.5
87
85
1.004
Including diode type,
including resistor type also available
4.0
diode type
11.0
.433
.157
15.0
.591
5.8
.228
0.08
2-9.5 0.08
2-.374 .003
2-6.3
2-.248
.003
26.5
22.0
.866
1.043
4-1.7 dia. hole
4-.067 dia. hole
8.4
.331
0.8
86
85
.031
1.2
16.8
.661
.047
30
87
2.6
.102
8.4
.331
17.9
.705
Dimension:
Max. 1mm .039 inch:
General tolerance
0.1 .004
1 to 3mm .039 to .118 inch: 0.2 .008
Min. 3mm .118 inch: 0.3 .012
ds_61202_en_cb: 030412D
10
CB
Products with diode inside
5. High contact capacity (1 Form A) (PC board type)
are discontinued in 2014.
CAD Data
External dimensions
Schematic (Bottom view)
86
30
25.5
1.0
1.004
1.0
87
85
.039
1.0
.039
4.5
.039
.177
4.5
diode type
5.3
5.3
.177
.209
.209
A*
3-1.7
3-.067
2-2.15
2-.085
6.3
3-1.7
9.5
9.5
3-.067
PC board pattern (Bottom view)
.374 .248
26.5
.374
22.0
.866
1.043
Sealed by epoxy resin
1.4
3-2.15
3-.085
2.6
.055
.102
8.4
.331
2-0.8
86
8 6
2-.031
8.4
3.9
.331
7.8
3-1.8
.154
16.8
.661
2-1.2
16.8
.661
3-.071
.307
3.9
2-.047
30
87
3 0
.154
8 7
8 5
85
3-1.8
3-2.15
3-.085
3-.071
7.8
8.4
.331
17.9
.705
8.4
.307
.331
3.9 3.9
.154 .154
2.6
17.9
.102
.705
* Intervals between terminals is measured at A surface level.
Dimension:
General tolerance
Max. 1mm .039 inch:
0.1 .004
1 to 3mm .039 to .118 inch: 0.2 .008
Min. 3mm .118 inch:
0.3 .012
Cautions regarding the protection element
1. Part numbers without protection
elements
1) 12 V models
2. Part numbers with diodes
These relays use a diode in the coil surge
protection element. Therefore, the
release time is slower and the working
life might be shorter compared to part
numbers without protection elements and
part numbers with resistors.
Be sure to use only after evaluating
under actual load conditions.
3. Part numbers with resistors
This part number employs a resistor in
the coil surge protection circuit; therefore,
an external surge protection element is
not required. In particular, when a diode
is connected in parallel with a coil, the
release time becomes slower which
could adversely affect working life.
Please check the circuit and make sure
that a diode is not connected in parallel
with the coil drive circuit.
When connecting a coil surge protection
circuit to these relays, we recommend a
zener diode with a zener voltage of 24 V
or higher, or a resistor (680 to 1,000).
When a diode is connected to the coil in
parallel, the release time will slow down
and working life may shorten. Before use,
please check the circuit and verify that
the diode is not connected in parallel to
the coil drive circuit.
2) 24 V models
When connecting a coil surge protection
circuit to these relays, we recommend a
zener diode with a zener voltage of 48 V
or higher, or a resistor (2,800 to
4,700).
When a diode is connected to the coil in
parallel, the release time will slow down
and working life may shorten. Before use,
please check the circuit and verify that
the diode is not connected in parallel to
the coil drive circuit.
For Cautions for Use, see Relay Technical Information.
ds_61202_en_cb: 030412D
11
相关型号:
CB1VF-D-24V
Power/Signal Relay, SPDT, Momentary, 0.075A (Coil), 24VDC (Coil), 1800mW (Coil), 1A (Contact), 24VDC (Contact), DC Input, DC Output, PCB Mount-Straight, ROHS COMPLIANT
PANASONIC
CB1VF-R-12V
Power/Signal Relay, SPDT, Momentary, 0.134A (Coil), 12VDC (Coil), 1600mW (Coil), 1A (Contact), 12VDC (Contact), DC Input, DC Output, PCB Mount-Straight, ROHS COMPLIANT
PANASONIC
©2020 ICPDF网 联系我们和版权申明