CM1A-R-P-24V [PANASONIC]
Electromechanical Relay, SPST, 15A (Contact), 28VDC (Contact), Random, DC Output;型号: | CM1A-R-P-24V |
厂家: | PANASONIC |
描述: | Electromechanical Relay, SPST, 15A (Contact), 28VDC (Contact), Random, DC Output 继电器 |
文件: | 总5页 (文件大小:1126K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
MICRO-ISO
AUTOMOTIVE RELAY
CM RELAYS
FEATURES
• Micro-ISO type terminals
• Small size:
• Uses international standard ISO
terminal arrangement.
20 mm(L)15 mm(W)22 mm(H)
.787 inch(L).591 inch(L).866 inch(H)
• Wide line-up
The ISO international standard terminal
arrangement is used.
PC board and Plug-in type, Resistor
inside type.
24V DC type is also available.
• Compact and high-capacity 35A load
switching
N.O.: 35A 14V DC, N.C.: 20A 14V DC
(Sealed type)
Min. 5 104
TYPICAL APPLICATIONS
• Fan motor
• Heater
Plug-in type
• Head lump
• Air Compressor
• ABS
• Blower fan
• Defogger, etc.
PC board type
N.O.: 35A 14V DC, N.C.: 20A 14V DC
(Flux-resistant type)
Min. 105 *12V DC type
ORDERING INFORMATION
CM
Contact arrangement
1a: 1 Form A
1: 1 Form C
Protective construction
Nil: Sealed type
F: Flux-resistant type
Protective element
Nil: None (Standard type)
R: With resistor inside
Mounting classification
Nil: Plug-in type
P: PC board type (24 V only)
Coil voltage (DC)
12 V, 24 V
TYPES
Standard type
Plug-in type
PC board type
Contact arrangement
Coil voltage
Sealed type
Part No.
Flux-resistant type
Part No.
Sealed type
Part No.
—
Flux-resistant type
Part No.
12 V DC
24 V DC
12 V DC
24 V DC
CM1a-12V
CM1a-24V
CM1-12V
CM1-24V
CM1aF-12V
CM1aF-24V
CM1F-12V
—
1 Form A
1 Form C
CM1a-P-24V
—
CM1aF-P-24V
—
CM1F-24V
CM1-P-24V
CM1F-P-24V
Standard packing; Carton: 50 pcs.; Case: 200 pcs.
Note: Please use “CM-R--” built-in resistor type. (Asterisks “ ” should be filled in from ORDERING INFORMATION.)
ds_61204_en_cm: 010113J
1
CM
RATING
1. Coil data
Nominal operating
current
[10%] (at 20C 68F)
Nominal coil
voltage
Pick-up voltage
(at 20C 68F)
Drop-out voltage
(at 20C 68F)
Coil resistance
[10%] (at 20C 68F)
Nominal operating
power
Usable voltage range
12 V DC
24 V DC
3 to 7 V DC
1.2 to 4.2 V DC
2.4 to 8.4 V DC
125 mA
75 mA
96
1.5 W
1.8 W
10 to 16V DC
20 to 32V DC
6 to 14 V DC
320
2. Specifications
Specifications
Characteristics
Item
12 V DC
24 V DC
Arrangement
1 Form A
1 Form C
1 Form A
1 Form C
Contact resistance (Initial)
Typ 2m (By voltage drop 6V DC 1A)
N.O.: Max. 0.5 V
(By voltage drop
14 V DC 35 A)
N.C.: Max. 0.3 V
(By voltage drop
14 V DC 20 A)
N.O.: Max. 0.3 V
(By voltage drop
28 V DC 15 A)
N.C.: Max. 0.2 V
(By voltage drop
28 V DC 8 A)
N.O.: Max. 0.5 V
(By voltage drop
14 V DC 35 A)
N.O.: Max. 0.3 V
(By voltage drop
28 V DC 15 A)
Contact
Contact voltage drop
(after electrical life test)
Contact material
Ag alloy (Cadmium free)
N.O.: 35 A 14V DC
N.C.: 20 A 14V DC
N.O.: 15 A 28V DC
N.C.: 8 A 28V DC
Nominal switching capacity (resistive load)
N.O.: 35 A 14V DC
N.O.: 20 A 14V DC
N.O.: 15 A 28V DC
N.O.: 15 A 28V DC
Max. carrying current
(at 85C 185F, continuous)
N.O.: 20 A 14V DC
N.C.: 10 A 14V DC
N.O.: 15 A 28V DC
N.C.: 8 A 28V DC
Rating
Nominal operating power
Min. switching capacity (resistive load)*1
1.5 W, 1.7 W (with resistor inside type)
1 A 12V DC
1.8 W, 2.0 W (with resistor inside type)
1 A 24V DC
Insulation resistance (Initial)
Min. 20 M (at 500V DC, Measurement at same location as “Breakdown voltage” section.)
500 Vrms for 1 min. (Detection current: 10mA)
Between open contacts
Breakdown voltage
(Initial)
Between contacts and coil
500 Vrms for 1 min. (Detection current: 10mA)
Electrical
characteristics
Operate time (at nominal voltage)
(at 20C 68F)
Max. 10ms (excluding contact bounce time) (Initial)
Release time (at nominal voltage)
(at 20C 68F)
Max. 10ms (excluding contact bounce time) (Initial)
Functional
Shock resistance
Min. 200 m/s2 {20G} (Half-wave pulse of sine wave: 11ms; detection time: 10s)
Min. 1,000 m/s2 {100G} (Half-wave pulse of sine wave: 6ms)
10 Hz to 500 Hz, Min. 44.1 m/s2 {4.5G}
Destructive
Mechanical
Functional
characteristics
10 Hz to 2,000 Hz, Min. 44.1 m/s2 {4.5G},
Time of vibration for each direction; X, Y, Z direction: 4 hours
Vibration resistance
Destructive
Mechanical (at 120 cpm)
Min. 106
Expected life
Conditions
Electrical (operating frequency: 2s ON, 2s OFF)
Flux-resistant type: Min. 105, Sealed type: Min. 5 104
Ambient temperature: –40C to +85C –40F to +185F*3,
Humidity: 5% R.H. to 85% R.H. (Not freezing and condensing at low temperature),
Air pressure: 86 to 106 kPa
Conditions for operation, transport and storage*2
Mass
Approx. 20 g .71 oz
Notes:
*1. This value can change due to the switching frequency, environmental conditions, and desired reliability level, therefore it is recommended to check this with the actual load.
*2. The upper operation ambient temperature limit is the maximum temperature that can satisfy the coil temperature rise value. Refer to “6. Usage, Storage and Transport
Conditions“ in AMBIENT ENVIRONMENT section in Relay Technical Information.
*3. Please inquire if you will be using the relay in a high temperature atmosphere.
REFERENCE DATA
1.-(1) Coil temperature rise (12V type, 85C
185F)
1.-(2) Coil temperature rise (24V type, 85C
185F)
2. Ambient temperature and operating voltage
range (12V type)
Sample: CM1F-12V, 3 pcs.
Sample: CM1F-24V, 4 pcs.
Measured portion: Inside the coil
Contact carrying current: 20A, 35A
Ambient temperature: 85C 185F
Measured portion: Inside the coil
Contact carrying current: 0A, 15A
Ambient temperature: 85C 185F
120
120
100
30
25
35A
100
80
80
20
20A
15A
0A
Operating voltage range
60
40
60
15
10
5
40
20
0
20
0
Pick-up voltage
(Cold start)
0
12
14
16
24
28
32
−40 −20
0
20 40 60 8085 100 120
Coil applied voltage, V
Coil applied voltage, V
Ambient temperature, °C
ds_61204_en_cm: 010113J
2
CM
3. Ambient temperature characteristics
(Cold/initial)
4. Distribution of pick-up and drop-out voltage
Sample: CM1F-12V, 100pcs.
5. Distribution of operate time
Sample: CM1F-12V, 30pcs.
* Max. 10ms standard (excluding contact bounce)
80
70
40
35
30
25
20
15
10
5
Pick-up voltage
Drop-out voltage
Pick-up voltage
upper limit
70
60
50
40
30
20
10
0
60
50
40
30
20
10
0
Drop-out voltage lower limit
0
0.5 1 1.5 2 2.5 3 3.5 4 4.5 5 5.5 6 6.5 7
−40 −20
0
20
40
60
80 100
1.0 1.52.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 6.0 6.5 7.0
Voltage, V
Time, ms
Ambient temperature, °C
6. Distribution of release time
Sample: CM1F-12V, 30pcs.
* Max. 10ms standard (excluding contact bounce)
40
35
30
25
20
15
10
5
0
0.5 1 1.5 2 2.5 3 3.5 4 4.5 5 5.5 6 6.5 7
Time, ms
7.-(1) Electrical life test (Motor free)
Change of pick-up and drop-out voltage
Change of contact resistance
Sample: CM1aF-R-12V, 6pcs.
Load: 16 A 13.5 V DC
10
9
10
9
Cooling fan motor actual load (free condition)
Operating frequency: ON 2s, OFF 6s
Ambient temperature: Room temperature
8
8
7
7
6
5
4
6
Pick-up voltage
Drop-out voltage
Max.
Min.
Circuit
5
4
3
2
3
2
Max.
Max.
Min.
X
Min.
M
M
1
0
1
0
13.5V
0
10
20
35
0
10
20
35
Cooling fan motor
No. of operations, x 104
No. of operations, x 104
Load current waveform
Inrush current: 85A, Steady current: 18A,
20A
500ms
ds_61204_en_cm: 010113J
3
CM
7.-(2) Electrical life test (Halogen lamp load)
Change of pick-up and drop-out voltage
Change of contact resistance
Sample: CM1aF-R-12V, 6pcs.
Load: 20A 13.5V DC
Operating frequency: ON 1s, OFF 14s
Ambient temperature: Room temperature
10
9
10
9
8
8
7
7
6
5
4
6
Pick-up voltage
Drop-out voltage
Max.
Min.
5
4
Max.
3
2
3
2
X
Max.
Min.
Min.
1
0
1
0
0
5
10
0
5
10
No. of operations, x 104
No. of operations, x 104
DIMENSIONS (mm inch)
Download from our Web site.
CADData
1. Plug-in type (1 Form C)
CAD Data
External dimensions
Schematic (Bottom view)
85
87
30
87a
86
22
.866
Including resistor type also available
4.25
.167
3.25
.128
11
A*
.433
0.8
.031
6.3
4.8
0.8
.031
.189
.248
20
2x1.75 dia.
.787
14
3x1.5 dia.
3x.059 dia.
2x.069 dia.
15
.591
2.1
.083
.551
8
.315
85
86
Dimension:
Max. 1mm .039 inch:
1 to 3mm .039 to .118 inch: 0.2 .008
General tolerance
0.1 .004
30
87
9
.354
87a
Min. 3mm .118 inch:
0.3 .012
Sealed by epoxy resin
* Intervals between terminals is measured at A surface level.
2. Plug-in type (1 Form A)
CAD Data
External dimensions
Schematic (Bottom view)
85
87
30
22
.866
86
Including resistor type also available
4.25
.167
3.25
.128
11
A*
.433
0.8
.031
6.3
4.8
0.8
.031
.189
.248
20
2x1.75 dia.
.787
3x1.5 dia.
3x.059 dia.
2x.069 dia.
15
.591
2.1
14
.083
.551
8
.315
85
86
Dimension:
Max. 1mm .039 inch:
1 to 3mm .039 to .118 inch: 0.2 .008
Min. 3mm .118 inch: 0.3 .012
General tolerance
0.1 .004
30
87
9
.354
87a
Sealed by epoxy resin
* Intervals between terminals is measured at A surface level.
ds_61204_en_cm: 010113J
4
CM
3. PC board type (1 Form C) 24V only
CAD Data
External dimensions
Schematic (Bottom view)
85
87
30
87a
86
23
.906
1
MAX. 1.2
.039
MAX. .047
Including resistor type also available
3.5
.138
Pre-soldering
(All terminal)
0.8
A*
2.5
.098
.031
2.1
0.8
.031
PC board pattern (Bottom view)
.083
4.8
.189
20
.787
15
.591
6.3
.248
15
1c type only
1c type only
1.4+0.1
2.1
1.4+0.1
.055+.0004
0
4.5 0.05
.083
.591
.055+.004
0
0
8
.177 .002
85
.315
87
30
85
86
2x2.7+0.1
87a
9.0 0.05
.354 .002
0
2x.106+.004
30
87
Dimension:
Max. 1mm .039 inch:
1 to 3mm .039 to .118 inch: 0.2 .008
General tolerance
0.1 .004
0
9
.354
87a
86
2 (or 3)x2.4+0.1
2x1.34+0.1
0
2 (or 3)x.094+.004
2x.053+.0004
0
0
Sealed by epoxy resin
8.0 0.05
Min. 3mm .118 inch:
0.3 .012
.315 .002
15.0 0.05
.591 .002
* Dimensions (thickness and width) of terminal is measured before pre-soldering.
Intervals between terminals is measured at A surface level.
Tolerance: 0.1 .004
4. PC board type (1 Form A) 24V only
CAD Data
External dimensions
Schematic (Bottom view)
85
87
30
23
.906
86
Including resistor type also available
1
MAX. 1.2
.039
MAX. .047
3.5
.138
Pre-soldering
(All terminal)
0.8
A*
2.5
.098
.031
2.1
0.8
.031
.083
4.8
.189
20
.787
15
6.3
.248
15
2.1
.083
.591
.591
8
.315
85
Dimension:
Max. 1mm .039 inch:
1 to 3mm .039 to .118 inch: 0.2 .008
Min. 3mm .118 inch: 0.3 .012
General tolerance
0.1 .004
30
87
9
.354
87a
86
Sealed by epoxy resin
* Dimensions (thickness and width) of terminal is measured before pre-soldering.
Intervals between terminals is measured at A surface level.
NOTES
1. Soldering
Max. 350C 662F (solder temperature),
within 3 seconds (soldering time)
The effect on the relay depends on the
actual PC board used. Please verify the
PC board to be used.
For Cautions for Use, see Relay Technical Information.
ds_61204_en_cm: 010113J
5
相关型号:
CM1AF-P-12V
Power/Signal Relay, SPST, Momentary, 0.125A (Coil), 12VDC (Coil), 1500mW (Coil), 20A (Contact), 14VDC (Contact), DC Input, DC Output, Through Hole-Straight Mount, ROHS COMPLIANT
PANASONIC
CM1AF-P-24V
Power/Signal Relay, SPST, Momentary, 0.075A (Coil), 24VDC (Coil), 1800mW (Coil), 8A (Contact), 28VDC (Contact), DC Input, DC Output, Through Hole-Straight Mount, ROHS COMPLIANT
PANASONIC
CM1F-P-12V
Power/Signal Relay, SPDT, Momentary, 0.125A (Coil), 12VDC (Coil), 1500mW (Coil), 20A (Contact), 14VDC (Contact), DC Input, DC Output, Through Hole-Straight Mount, ROHS COMPLIANT
PANASONIC
CM1F-P-24V
Power/Signal Relay, SPDT, Momentary, 0.075A (Coil), 24VDC (Coil), 1800mW (Coil), 8A (Contact), 28VDC (Contact), DC Input, DC Output, Through Hole-Straight Mount, ROHS COMPLIANT
PANASONIC
©2020 ICPDF网 联系我们和版权申明