DS2E-M-DC5V-R [PANASONIC]
Power/Signal Relay, DPDT, Momentary, 0.08A (Coil), 5VDC (Coil), 400mW (Coil), 2A (Contact), 220VDC (Contact), DC Input, AC/DC Output, Through Hole-Straight Mount;型号: | DS2E-M-DC5V-R |
厂家: | PANASONIC |
描述: | Power/Signal Relay, DPDT, Momentary, 0.08A (Coil), 5VDC (Coil), 400mW (Coil), 2A (Contact), 220VDC (Contact), DC Input, AC/DC Output, Through Hole-Straight Mount 光电二极管 继电器 |
文件: | 总6页 (文件大小:262K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Automation Controls Catalog
DS
Partly to Be Discontinued:
2 Form C type
(Standard, Reverse polarity type)
Last time buy:March 31, 2015
Long seller backed
by product variety and
high reliability
DS RELAYS
FEATURES
1. Breakthrough height of 9.8 mm .386
inch beats the 10 mm .394 inch limit
1c and 2c all have the same height
(9.8 mm .386 inch). The width of the
relay is also the same (9.9 mm .390
inch). Since the only size variable is
the length, the shared form makes
mounting on printed printing wiring
boards easy.
5. Polarized magnetic circuits realize
resistance to shock and vibration
High-performance polarized magnetic
circuits that utilize the energy of
permanent magnets have made it
possible to create relays with strong
resistance to shock and vibration.
6. DIL terminal array enables use of IC
sockets
2. Suitable for use in difficult
environments
7. Widening scope of application with
multicontact latching
Epoxy resin seals the parts and cut off
the external atmosphere, thus enabling
use in difficult environments.
3. Can be used with automatic solder
and automatic wash systems
Automatic soldering and automatic
washing can be carried out once the
parts are mounted on PC boards.
4. Gold-clad twin contacts ensure high
reliability
In addition to single side stable types,
you can take advantage of the memory
of functions of convenient 1 coil or 2
coil latching relays.
TYPICAL APPLICATIONS
Besides telecommunications, measuring
devices, office equipment, computers
and related equipment, DS relays are
also recommended for a broad range of
applications including business devices,
audio systems, and industrial equipment.
Highly stable gold cladding on the
contacts ensures that contact
resistance changes little over time.
Furthermore, the use of twin contacts,
a configuration that performs with
superior contact reliability, ensures
extremely low contact failure rates
even under low level loads.
Compliance with RoHS Directive
ORDERING INFORMATION
DS
E
Contact arrangement
1: 1 Form C
2: 2 Form C
Sensitivity
M: 400 mW nominal operating power
S: 200 mW nominal operating power
Operating function
Nil: Single side stable
L: 1 coil latching
L2: 2 coil latching
Nominal coil voltage
DC 1.5, 3, 5, 6, 9, 12, 24, 48 V
Nil: Standard polarity type
R: Reverse polarity type
Note: 1 coil latching type are manufactured by lot upon receipt of order.
Reverse polarity types available (add suffix-R)
industrial.panasonic.com/ac/e/
© Panasonic Corporation 2014
ASCTB17E 201401-T
2014.01
–1–
Partly to Be Discontinued: 2 Form C type (Standard, Reverse polarity type)
Last time buy: March 31, 2015
DS
TYPES
1. Standard type
Single side stable type
Part No.
2 coil latching type
Part No.
Contact
arrangement
Nominal coil
voltage
1.5V DC
3V DC
5V DC
6V DC
9V DC
12V DC
24V DC
48V DC
3V DC
5V DC
6V DC
9V DC
12V DC
24V DC
48V DC
DS1E-M-DC1.5V
DS1E-M-DC3V
DS1E-M-DC5V
DS1E-M-DC6V
DS1E-M-DC9V
DS1E-M-DC12V
DS1E-M-DC24V
DS1E-M-DC48V
DS2E-M-DC3V
DS2E-M-DC5V
DS2E-M-DC6V
DS2E-M-DC9V
DS2E-M-DC12V
DS2E-M-DC24V
DS2E-M-DC48V
DS1E-ML2-DC1.5V
DS1E-ML2-DC3V
DS1E-ML2-DC5V
DS1E-ML2-DC6V
DS1E-ML2-DC9V
DS1E-ML2-DC12V
DS1E-ML2-DC24V
DS1E-ML2-DC48V
DS2E-ML2-DC3V
DS2E-ML2-DC5V
DS2E-ML2-DC6V
DS2E-ML2-DC9V
DS2E-ML2-DC12V
DS2E-ML2-DC24V
DS2E-ML2-DC48V
1 Form C
2 Form C
Standard packing: Tube: 50 pcs.; Case: 500 pcs.
2. High sensitivity type
Single side stable type
Part No.
2 coil latching type
Part No.
Contact
arrangement
Nominal coil
voltage
1.5V DC
3V DC
5V DC
6V DC
9V DC
12V DC
24V DC
48V DC
3V DC
5V DC
6V DC
9V DC
12V DC
24V DC
48V DC
DS1E-S-DC1.5V
DS1E-S-DC3V
DS1E-S-DC5V
DS1E-S-DC6V
DS1E-S-DC9V
DS1E-S-DC12V
DS1E-S-DC24V
DS1E-S-DC48V
DS2E-S-DC3V
DS2E-S-DC5V
DS2E-S-DC6V
DS2E-S-DC9V
DS2E-S-DC12V
DS2E-S-DC24V
DS2E-S-DC48V
DS1E-SL2-DC1.5V
DS1E-SL2-DC3V
DS1E-SL2-DC5V
DS1E-SL2-DC6V
DS1E-SL2-DC9V
DS1E-SL2-DC12V
DS1E-SL2-DC24V
DS1E-SL2-DC48V
DS2E-SL2-DC3V
DS2E-SL2-DC5V
DS2E-SL2-DC6V
DS2E-SL2-DC9V
DS2E-SL2-DC12V
DS2E-SL2-DC24V
DS2E-SL2-DC48V
1 Form C
2 Form C
Standard packing: Tube: 50 pcs.; Case: 500 pcs.
Note: Reverse polarity types available (add suffix-R)
RATING
1. Coil data
1) Single side stable type
Nominal operating
current [ 10%]
(at 20°C 68°F)
Coil resistance
[ 10%]
(at 20°C 68°F)
Nominal coil
voltage
Pick-up voltage
(at 20°C 68°F)
Drop-out voltage
(at 20°C 68°F)
Nominal operating
power
Max. applied voltage
(at 50°C 122°F)
Type
1.5V DC
3V DC
266.7mA
133.3mA
80.0mA
66.7mA
44.4mA
33.3mA
16.7mA
8.3mA
5.63Ω
22.5Ω
62.5Ω
90Ω
203Ω
360Ω
1,440Ω
5,760Ω
11.3Ω
45Ω
125Ω
180Ω
1 Form C:
120%V of
nominal voltage
5V DC
70%V or less of
nominal voltage
(Initial)
10%V or more of
nominal voltage
(Initial)
6V DC
Standard
(M) type
400mW
9V DC
2 Form C:
150%V of
nominal voltage
12V DC
24V DC
48V DC
1.5V DC
3V DC
133.3mA
66.7mA
40.0mA
33.3mA
22.2mA
16.7mA
8.3mA
1 Form C:
80%V or less of
nominal voltage
2 Form C:
70%V or less of
nominal voltage
(Initial)
1 Form C:
160%V of
nominal voltage
5V DC
High
sensitivity
(S) type
10%V or more of
nominal voltage
(Initial)
6V DC
200mW
9V DC
405Ω
720Ω
2,880Ω
11,520Ω
2 Form C:
200%V of
nominal voltage
12V DC
24V DC
48V DC
4.2mA
Panasonic Corporation Automation Controls Business Division
© Panasonic Corporation 2014
ASCTB17E 201401-T
industrial.panasonic.com/ac/e/
–2–
Partly to Be Discontinued: 2 Form C type (Standard, Reverse polarity type)
Last time buy: March 31, 2015
DS
2) 2 coil latching type
Nominal operating
current [ 10%]
(at 20°C 68°F)
Coil resistance
[ 10%]
(at 20°C 68°F)
Nominal operating
power
Nominal coil
voltage
Set voltage
(at 20°C 68°F)
Reset voltage
(at 20°C 68°F)
Max. applied voltage
(at 50°C 122°F)
Type
Set coil Reset coil Set coil Reset coil Set coil Reset coil
1.5V DC
3V DC
240mA
120mA
72mA
60mA
40mA
30mA
15mA
7.5mA
120mA
60mA
36mA
30mA
20mA
15mA
7.5mA
3.75mA
240mA
120mA
72mA
60mA
40mA
30mA
15mA
7.5mA
120mA
60mA
36mA
30mA
20mA
15mA
7.5mA
3.75mA
6.25Ω
25Ω
6.25Ω
25Ω
1 Form C:
120%V of
nominal voltage
5V DC
69.4Ω
100Ω
225Ω
400Ω
1,600Ω
6,400Ω
12.5Ω
50Ω
139Ω
200Ω
450Ω
800Ω
3,200Ω
69.4Ω
100Ω
225Ω
400Ω
1,600Ω
6,400Ω
12.5Ω
50Ω
139Ω
200Ω
450Ω
800Ω
3,200Ω
70%V or less of
nominal voltage
(Initial)
70%V or less of
nominal voltage
(Initial)
6V DC
Standard
(M) type
360mW
360mW
9V DC
2 Form C:
150%V of
nominal voltage
12V DC
24V DC
48V DC
1.5V DC
3V DC
1 Form C:
80%V or less of
nominal voltage
1 Form C:
80%V or less of
nominal voltage
1 Form C:
160%V of
nominal voltage
5V DC
High
sensitivity
(S) type
6V DC
180mW
180mW
2 Form C:
70%V or less of
nominal voltage
(Initial)
2 Form C:
70%V or less of
nominal voltage
(Initial)
9V DC
2 Form C:
200%V of
nominal voltage
12V DC
24V DC
48V DC
12,800Ω 12,800Ω
2. Specifications
Characteristics
Item
Specifications
Arrangement
1 Form C
2 Form C
Contact
Initial contact resistance, max.
Contact material
Max. 50 mΩ (By voltage drop 6 V DC 1A)
Ag+Au clad
Nominal switching capacity
Max. switching power
Max. switching voltage
Max. carrying current
2 A 30 V DC (resistive load)
60 W, 125 VA (resistive load)
220 V DC, 250 V AC
3 A
Rating
Min. switching capacity (Reference value)*1
10µA 10m V DC
Single side stable (M type: 400 mW, S type: 200 mW);
latching (M type: 360 mW, S type: 180 mW)
Nominal operating power
Min. 100MΩ (at 500V DC)
Measurement at same location as “Initial breakdown voltage” section.
Insulation resistance (Initial)
1,000 Vrms for 1min.
(500 Vrms for 1min: 1 Form C high sensitivity type) (Detection current: 10mA.)
Between open contacts
Breakdown voltage
(Initial)
1,500 Vrms for 1min.
(1,000 Vrms for 1min: 1 Form C high sensitivity type) (Detection current: 10mA.)
Between contact and coil
Electrical
characteristics
Max. 65°C
Temperature rise
(By resistive method, nominal coil voltage applied to the coil, contact carrying current: 2A.)
Operate time [Set time] (at 20°C 68°F)
Release time [Reset time] (at 20°C 68°F)
Max. 10 ms [10 ms] (Nominal coil voltage applied to the coil, excluding contact bounce time.)
Max. 5 ms [10 ms] (Nominal coil voltage applied to the coil, excluding contact bounce time.)
(without diode)
Functional*2
Shock resistance
Min. 490 m/s2
Min. 490 m/s2
Destructive
Min. 980 m/s2 (Half-wave pulse of sine wave: 6 ms.)
Mechanical
characteristics
Functional
Vibration resistance
Destructive
10 to 55 Hz at double amplitude of 3.3 mm (Detection time: 10µs.)
10 to 55 Hz at double amplitude of 5 mm
Mechanical
Electrical
Min. 108 (107: 1 Form C latching type) (at 600 cpm)
Min. 5×105 rated load (at 60 cpm)
Expected life
Ambient temperature: –40°C to +70°C –40°F to +158°F
Conditions for operation, transport and storage*3
Max. operating speed (at rated load)
Humidity: 5 to 85% R.H. (Not freezing and condensing at low temperature)
Conditions
Unit weight
60 cpm
Approx. 3 g .11 oz
Approx. 4g .14oz
Notes: *1 This value can change due to the switching frequency, environmental conditions, and desired reliability level, therefore it is recommended to check this with the
actual load. (TX/TX-S/TX-D relay AgPd contact type are available for low level load switching [10V DC, 10mA max. level])
*2 Half-wave pulse of sine wave: 11ms; detection time: 10µs
*3 Refer to 6. Conditions for operation, transport and storage mentioned in AMBIENT ENVIRONMENT (Page 24).
Panasonic Corporation Automation Controls Business Division
© Panasonic Corporation 2014
ASCTB17E 201401-T
industrial.panasonic.com/ac/e/
–3–
Partly to Be Discontinued: 2 Form C type (Standard, Reverse polarity type)
Last time buy: March 31, 2015
DS
REFERENCE DATA
1. Maximum switching capacity
2. Life curve (Resistive load)
3. Contact reliability for AC loads
Tested sample: DS2E-M-DC24V 10 pcs.
Operating speed: 20 cpm.
Detection level: 200 mΩ
99.9
99.0
95.0
1,000V
1,000
70.0
50.0
30 V DC
30.0
100
10
100V
10V
10.0
5.0
125 V AC
2.0
1.0
0.5
Weibull
probability data
0.2
0.1
10mV
0
10
100
1,000
0
1
2
10µA
100mA
1A
No. of operations, ×104
Switching current
Switching current, A
4-(1). Coil termperature rise
(2 Form C single side stable type)
4-(2). Coil temperature rise
(2 Form C 2 coil latching type)
5. Operate and release time characteristics
(2 Form C single side stable type)
Tested sample: DS2E-M-DC12V
Point measured: Inside the coil
Tested sample: DS2E-ML2-DC12V
Point measured: Inside the coil
Test condition: Without diode connected to coil in
parallel
Ambient temperature: 18° to 19°C 64° to 66°F
Ambient temperature: 20° to 21°C 68° to 70°F
4
60
50
40
60
3A
50
3A
2A
3
0A
2A
Operate time (mean)
40
0A
2
30
20
10
0
30
Release time (mean)
20
Reset coil
1
0
Set coil
10
0
80
100
120
100
110
100
110
Coil applied voltage, %
Coil applied voltage, %V
Coil applied voltage, %V
6-(1). Influence of adjacent mounting
(1 Form C)
6-(2). Influence of adjacent mounting
(2 Form C)
Pick-up voltage
(1) (2) (3)
Pick-up voltage
(1) (2) (3)
OFF OFF
OFF
OFF
10
0
10
0
ON
ON
ON
ON
–10
–10
OFF
OFF
OFF
OFF
Drop-out voltage
Drop-out voltage
10
0
10
0
ON
ON
ON
ON
–10
–10
5
.197
10
.394
5
.197
10
.394
Inter-relay distance , mm inch
Inter-relay distance , mm inch
Panasonic Corporation Automation Controls Business Division
© Panasonic Corporation 2014
ASCTB17E 201401-T
industrial.panasonic.com/ac/e/
–4–
Partly to Be Discontinued: 2 Form C type (Standard, Reverse polarity type)
Last time buy: March 31, 2015
DS
The CAD data of the products with a CAD Data mark can be downloaded from: http://panasonic-electric-works.net/ac
DIMENSIONS (mm inch)
DS (1 Form C)
Single side stable, 2 coil latching
PC board pattern (Bottom view)
Single side stable
2 coil latching
External dimensions
CAD Data
2.54
.100
2.54
.100
5-0.9 dia.
5-.035 dia.
6-0.9 dia.
6-.035 dia.
15
.590
9.9
.390
2.54
.100
2.54
.100
9.3
.366
0.6
.024
9.9
.390
7.62
.300
7.62
.300
3.4
.134
0.3
.012
0.6
.024
5.6
5.08
.200
7.62
.300
5.08
.200
7.62
.300
5.08
.200
.221
7.62
.300
7.62
.300
Schematic (Bottom view)
General tolerance: 0.3 .012
Single side stable
2 coil latching
1
6
1
3
6
12 10
7
12 10
7
(Deenergized condition)
(Reset condition)
Tolerance: 0.1 .004
Note: External dimensions of 1 coil latching types are same as single side stable type.
DS (2 Form C)
Single side stable
External dimensions
PC board pattern (Bottom view)
CAD Data
20
.780
9.9
.390
2.54
.100
8-0.9 dia.
8-.035 dia.
2.54
.100
9.3
.366
0.6
.024
9.9
.390
7.62
.300
3.4
.134
0.3
.012
0.6
.024
5.6
5.08 5.08
.200 .200
7.62
.300
5.08 5.08
.200 .200
.221
7.62
.300
7.62
.300
Schematic (Bottom view)
General tolerance: 0.3 .012
9
11 13
16
8
6
4
1
(Deenergized condition)
Tolerance: 0.1 .004
Note: External dimensions of 1 coil latching types are same as single side stable type.
DS (2 Form C)
2 coil latching
External dimensions
PC board pattern (Bottom view)
CAD Data
20
.780
9.9
.390
2.54
.100
10-0.9 dia.
10-.035 dia.
2.54
.100
9.3
.366
0.6
.024
9.9
.390
7.62
.300
3.4
.134
0.3
.012
0.6
.024
5.6
.221
5.08 5.08 5.08
.200 .200 .200
2.54
.100
5.08 5.08 5.08
.200 .200 .200
7.62
.300
2.54
.100
Schematic (Bottom view)
General tolerance: 0.3 .012
9
11 13 15 16
8
6
4
1
2
(Reset condition)
Tolerance: 0.1 .004
Panasonic Corporation Automation Controls Business Division
© Panasonic Corporation 2014
ASCTB17E 201401-T
industrial.panasonic.com/ac/e/
–5–
Partly to Be Discontinued: 2 Form C type (Standard, Reverse polarity type)
Last time buy: March 31, 2015
DS
NOTES
1. Coil connection
When connecting coils, refer to the wiring
diagram to prevent mis-operation or
malfunction.
For general cautions for use,
please refer to the “Cautions for
use of Signal Relays” or “General
Application Guidelines”.
Panasonic Corporation Automation Controls Business Division
© Panasonic Corporation 2014
ASCTB17E 201401-T
industrial.panasonic.com/ac/e/
–6–
相关型号:
DS2E-M-DC6V
Power/Signal Relay, DPDT, Momentary, 0.066A (Coil), 6VDC (Coil), 400mW (Coil), 2A (Contact), 30VDC (Contact), DC Input, AC/DC Output, Through Hole-Straight Mount, ROHS COMPLIANT
PANASONIC
DS2E-ML-DC12V
Power/Signal Relay, DPDT, Latched, 0.015A (Coil), 12VDC (Coil), 180mW (Coil), 2A (Contact), 220VDC (Contact), DC Input, AC/DC Output, Through Hole-Straight Mount
PANASONIC
DS2E-ML-DC12V-R
Power/Signal Relay, DPDT, Latched, 0.015A (Coil), 12VDC (Coil), 180mW (Coil), 2A (Contact), 220VDC (Contact), DC Input, AC/DC Output, Through Hole-Straight Mount
PANASONIC
DS2E-ML-DC24V
Power/Signal Relay, DPDT, Latched, 0.008A (Coil), 24VDC (Coil), 180mW (Coil), 2A (Contact), 220VDC (Contact), DC Input, AC/DC Output, Through Hole-Straight Mount
PANASONIC
DS2E-ML-DC3V
Power/Signal Relay, DPDT, Latched, 0.06A (Coil), 3VDC (Coil), 180mW (Coil), 2A (Contact), 220VDC (Contact), DC Input, AC/DC Output, Through Hole-Straight Mount
PANASONIC
DS2E-ML-DC3V-R
Power/Signal Relay, DPDT, Latched, 0.06A (Coil), 3VDC (Coil), 180mW (Coil), 2A (Contact), 220VDC (Contact), DC Input, AC/DC Output, Through Hole-Straight Mount
PANASONIC
©2020 ICPDF网 联系我们和版权申明