DZ27047 [PANASONIC]
Zener Diode, 4.71V V(Z), 4.99%, 0.12W, Silicon, Unidirectional, HALOGEN FREE AND ROHS COMPLIANT, SSSMINI2-F4-B, 2 PIN;
| 型号： | DZ27047 |
| 厂家： | 
PANASONIC |
| 描述： | Zener Diode, 4.71V V(Z), 4.99%, 0.12W, Silicon, Unidirectional, HALOGEN FREE AND ROHS COMPLIANT, SSSMINI2-F4-B, 2 PIN 测试 光电二极管 |
| 文件： | 总4页 (文件大小：401K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
This product complies with the RoHS Directive (EU 2002/95/EC).
DZ27047
Silicon epitaxial planar type
For constant voltage / waveform clipper and surge absorption circuit
Low noise type
DZ2S047 in SSSMini2 type package
Features
Package
ꢀCode
Excellent rising characteristics of zener current IZ
Low zener operating resistance RZ
SSSMini2-F4-B
Contributes to miniaturization of sets, reduction of component count.
Eco-friendly Halogen-free package
ꢀPin Name
1. Cathode
2. Anode
Packaging
Marking Symbol: AJ
Embossed type (Thermo-compression sealing): 10000 pcs / reel (standard)
Absolute Maximum Ratings Ta = 25°C
Parameter
Repetitive peak forward current
Total power dissipation*
Junction temperature
Symbol
IFRM
PT
Rating
200
Unit
mA
mW
°C
120
Tj
150
Storage temperature
T
stg
–55 to +150
°C
Note) : P = 120 mW achieved with a printed circuit board.
*
T
Electrical Characteristics Ta = 25°C±3°C
Parameter
Forward voltage
Symbol
VF
Conditions
Min
Typ
Max
1.0
Unit
V
IF = 10 mA
IZ = 5 mA
IZ = 5 mA
IZ = 1 mA
VR = 1 V
1, 2
Zener voltage *
VZ
4.47
4.94
80
V
Zener operating resistance
Zener rise operating resistance
Reverse current
RZ
W
RZK
IR
800
2.0
W
mA
mV/°C
3
Temperature coefficient of zener voltage *
SZ
IZ = 5 mA
0.5
Note) 1. Measuring methods are based on JAPANESE INDUSTRIAL STANDARD JIS C 7031 measuring methods for diodes.
2. Absolute frequency of input and output is 5 MHz.
3. *1: The temperature must be controlled 25°C for VZ measurement. VZ value measured at other temperature must be adjusted to VZ (25°C)
2: V guaranteed 20 ms after current flow.
*
*
Z
3: T = 25°C to 150°C
j
Publication date: May 2011
Ver. AED
1
This product complies with the RoHS Directive (EU 2002/95/EC).
DZ27047
IF VF
IZ VZ
IR VR
103
102
102
Ta = 25°C
Ta = 25°C
T
a = 25°C
10−3
10−5
10−7
10−9
10
1
10
1
10−1
10−1
10−2
10−2
10−3
10−3
0
0.4
0.8
1.2
0
1
2
3
0
2.5
5.0
7.5
10.0
Forward voltage VF (V)
Reverse voltage VR (V)
Zener voltage VZ (V)
RZ IZ
SZ IZ
Ct VR
103
102
5
3
80
60
40
20
0
Ta = 25°C
Ta = 25°C
1
−1
−3
10
1
−5
10−1
1
10
102
0
2
4
6
8
10
0
1
2
3
Zener current IZ (mA)
Zener current IZ (mA)
Reverse voltage VR (V)
Ver. AED
2
This product complies with the RoHS Directive (EU 2002/95/EC).
DZ27047
SSSMini2-F4-B
Unit: mm
+0.05
−0.03
0.27
+0.05
−0.02
0.13
2
1
0.60 ±0.05
Ver. AED
3
Request for your special attention and precautions in using the technical information and
semiconductors described in this book
(1) If any of the products or technical information described in this book is to be exported or provided to non-residents, the laws and
regulations of the exporting country, especially, those with regard to security export control, must be observed.
(2) The technical information described in this book is intended only to show the main characteristics and application circuit examples
of the products. No license is granted in and to any intellectual property right or other right owned by Panasonic Corporation or any
other company. Therefore, no responsibility is assumed by our company as to the infringement upon any such right owned by any
other company which may arise as a result of the use of technical information described in this book.
(3) The products described in this book are intended to be used for general applications (such as office equipment, communications
equipment, measuring instruments and household appliances), or for specific applications as expressly stated in this book.
Consult our sales staff in advance for information on the following applications:
– Special applications (such as for airplanes, aerospace, automotive equipment, traffic signaling equipment, combustion equipment,
life support systems and safety devices) in which exceptional quality and reliability are required, or if the failure or malfunction of
the products may directly jeopardize life or harm the human body.
It is to be understood that our company shall not be held responsible for any damage incurred as a result of or in connection with
your using the products described in this book for any special application, unless our company agrees to your using the products in
this book for any special application.
(4) The products and product specifications described in this book are subject to change without notice for modification and/or im-
provement. At the final stage of your design, purchasing, or use of the products, therefore, ask for the most up-to-date Product
Standards in advance to make sure that the latest specifications satisfy your requirements.
(5) When designing your equipment, comply with the range of absolute maximum rating and the guaranteed operating conditions
(operating power supply voltage and operating environment etc.). Especially, please be careful not to exceed the range of absolute
maximum rating on the transient state, such as power-on, power-off and mode-switching. Otherwise, we will not be liable for any
defect which may arise later in your equipment.
Even when the products are used within the guaranteed values, take into the consideration of incidence of break down and failure
mode, possible to occur to semiconductor products. Measures on the systems such as redundant design, arresting the spread of fire
or preventing glitch are recommended in order to prevent physical injury, fire, social damages, for example, by using the products.
(6) Comply with the instructions for use in order to prevent breakdown and characteristics change due to external factors (ESD, EOS,
thermal stress and mechanical stress) at the time of handling, mounting or at customer's process. When using products for which
damp-proof packing is required, satisfy the conditions, such as shelf life and the elapsed time since first opening the packages.
(7) This book may be not reprinted or reproduced whether wholly or partially, without the prior written permission of our company.
20100202
相关型号：
DZ2704700L
Zener Diode, 4.7V V(Z), 4.99%, 0.12W, Silicon, Unidirectional, HALOGEN FREE AND ROHS COMPLIANT, SSSMINI2-F4-B, SC-104A, 2 PIN
PANASONIC
DZ27051
Zener Diode, 5.1V V(Z), 5%, 0.12W, Silicon, Unidirectional, HALOGEN FREE AND ROHS COMPLIANT, SSSMINI2-F4-B, 2 PIN
PANASONIC
DZ2705100L
Zener Diode, 5.1V V(Z), 5%, 0.12W, Silicon, Unidirectional, HALOGEN FREE AND ROHS COMPLIANT, SSSMINI2-F4-B, SC-104A, 2 PIN
PANASONIC
DZ27056
Zener Diode, 5.6V V(Z), 5%, 0.12W, Silicon, Unidirectional, ROHS COMPLIANT, SSSMINI2-F4-B, 2 PIN
PANASONIC
DZ2706200L
Zener Diode, 6.2V V(Z), 5%, 0.12W, Silicon, Unidirectional, HALOGEN FREE AND ROHS COMPLIANT, SSSMINI2-F4-B, SC-104A, 2 PIN
PANASONIC
DZ2706800L
Zener Diode, 6.8V V(Z), 5%, 0.12W, Silicon, Unidirectional, HALOGEN FREE AND ROHS COMPLIANT, SSSMINI2-F4-B, SC-104A, 2 PIN
PANASONIC
DZ27075
Zener Diode, 7.5V V(Z), 5%, 0.12W, Silicon, Unidirectional, HALOGEN FREE AND ROHS COMPLIANT, SSSMINI2-F4-B, 2 PIN
PANASONIC
DZ2707500L
Zener Diode, 7.5V V(Z), 5%, 0.12W, Silicon, Unidirectional, HALOGEN FREE AND ROHS COMPLIANT, SSSMINI2-F4-B, SC-104A, 2 PIN
PANASONIC
DZ27082
Zener Diode, 8.2V V(Z), 5%, 0.12W, Silicon, Unidirectional, HALOGEN FREE AND ROHS COMPLIANT, SSSMINI2-F4-B, 2 PIN
PANASONIC
DZ2708200L
Zener Diode, 8.2V V(Z), 5%, 0.12W, Silicon, Unidirectional, HALOGEN FREE AND ROHS COMPLIANT, SSSMINI2-F4-B, SC-104A, 2 PIN
PANASONIC
DZ2709100L
Zener Diode, 9.1V V(Z), 5%, 0.12W, Silicon, Unidirectional, HALOGEN FREE AND ROHS COMPLIANT, SSSMINI2-F4-B, SC-104A, 2 PIN
PANASONIC
©2020 ICPDF网 联系我们和版权申明