ELL8TP471MB [PANASONIC]
Power Inductors Wire Wound type;型号: | ELL8TP471MB |
厂家: | PANASONIC |
描述: | Power Inductors Wire Wound type |
文件: | 总3页 (文件大小:175K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Power Inductors
Power Inductors /
Wire Wound type
Series : P
Type : ELL8TP
Features
●
Magnetic shielded structure
Low DC resistance and large current capability
Available on tape and reel for automatic insertion
RoHS compliant
●
●
●
Recommended Applications
●
Audiovisual equipment, Appliance, Office automation equipment, Amusement machine,
Power circuit for electric device
Standard Packing Quantity
●
5±± pcs./reel
As for Soldering Conditions and Safety Precautions,
■
Please see Data Files
Explanation of Part Numbers
1
2
ꢀ
4
5
6
7
8
9
1±
11
E
L
L
8
T
P
2
2
0
M
B
Product Code
Outer size Height Structure
Inductance
Tolerance Design No.
4R7 → 4.7 µH
1±1 → 1±± µH
M → ±2± ꢁ
N → ±ꢀ± ꢁ
ELL Choke Coil (Magnetic shielded type )
P
Series
T
5.± max.
Dimensions in mm (not to scale)
Recommended land patterns in mm (not to scale)
Marking
Date code
8.±±±.5
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
02 Oct. 2014
Power Inductors
Standard Parts
Inductance
(1±± kHz)
RDC
(at 2± °C)
Saturation
Temperature
✽2
✽1
Part No.
Rated Current
(mA max.)
Rise Current
(mA max.)
Marking
(µH)
±.8
Tol.
(mΩ)
ꢀ.6
4.7
7
Tol.
ELL8TPR80NB
ELL8TP1R2NB
ELL8TP2R5NB
ELL8TP3R3NB
ELL8TP4R7NB
ELL8TP6R8NB
ELL8TP100MB
ELL8TP150MB
ELL8TP220MB
ELL8TP330MB
ELL8TP470MB
ELL8TP680MB
ELL8TP101MB
ELL8TP151MB
ELL8TP221MB
ELL8TP331MB
ELL8TP471MB
ELL8TP681MB
ELL8TP102MB
95±±
85±±
55±±
5±±±
4±±±
ꢀ5±±
ꢀ±±±
2ꢀ±±
22±±
16±±
14±±
1±±±
9±±
7±±
55±
45±
4±±
ꢀ±±
25±
9±±±
8±±±
65±±
42±±
4±±±
ꢀ5±±
ꢀ±±±
2ꢀ±±
2±±±
16±±
15±±
1ꢀ±±
11±±
8±±
R8±
1R2
2R5
ꢀRꢀ
4R7
6R8
1±±
15±
22±
ꢀꢀ±
47±
68±
1±1
151
221
ꢀꢀ1
471
681
1±2
±ꢀ± ꢁ
1.2
2.5
ꢀ.ꢀ
±ꢀ± ꢁ
1ꢀ
14
18
25
44
55
84
4.7
6.8
1±.±
15.±
22.±
ꢀꢀ.±
47.±
68.±
1±±.±
15±.±
22±.±
ꢀꢀ±.±
47±.±
68±.±
1±±±.±
1±±
14±
19±
ꢀ4±
48±
7±±
1±±±
1ꢀ±±
21±±
±2± ꢁ
±2± ꢁ
7±±
57±
48±
4ꢀ±
ꢀꢀ±
✽1 Saturation Rated Current : This DC current which causes a ꢀ±ꢁ inductance reduction from its nominal value.
✽2 Temperature Rise Current : This indicates the value of current when temperature rise dt/t= 4± °C (at 2± °C).
Embossed Carrier Tape Dimensions in mm (not to scale)
R±.5 max.
2.±±
±.ꢀ
4.±±±.ꢀ
16.± ±.ꢀ
±
R±.5 max.
Tape running direction
Quantity 5±± pcs./reel
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
02 Oct. 2014
Power Inductors
Safety Precautions
(Common precautions for Power Inductors / Wire Wound type)
• When using our products, no matter what sort of equipment they might be used for, be sure to make a written
agreement on the specifications with us in advance. The design and specifications in this catalog are subject
to change without prior notice.
• Do not use the products beyond the specifications described in this catalog.
• This catalog explains the quality and performance of the products as individual components. Before use, check
and evaluate their operations when installed in your products.
• Install the following systems for a failsafe design to ensure safety if these products are to be used in equipment
where a defect in these products may cause the loss of human life or other significant damage, such as damage
to vehicles (automobile, train, vessel), traffic lights, medical equipment, aerospace equipment, electric heating
appliances, combustion/gas equipment, rotating equipment, and disaster/crime prevention equipment.
✽Systems equipped with a protection circuit and a protection device
✽Systems equipped with a redundant circuit or other system to prevent an unsafe status in the event of a single fault
Precautions for use
1. Operation range and environments
1 These products are designed and manufactured for general and standard use in general electronic
equipment (e.g. AV equipment, home electric appliances, office equipment, information and communication
equipment)
2 These products are not intended for use in the following special conditions. Before using the products, carefully
check the effects on their quality and performance, and determine whether or not they can be used.
• In liquid, such as water, oil, chemicals, or organic solvent
• In direct sunlight, outdoors, or in dust
• In salty air or air with a high concentration of corrosive gas, such as Cl2, H2S, NH3, SO2, or NO2
• In an environment where these products cause dew condensation
2. Handling
1 Do not bring magnets or magnetized materials close to the product. The influence of their magnetic field can
change the inductance value.
2 Do not apply strong mechanical shocks by either dropping or collision with other parts.
Excessive shock can damage the part.
3. Washing of board
Kindly consult the Technical department before washing of the PWB with any cleansing agent, and provide the
washing condition.
4. Resoldering with a soldering iron
The temperature of the tip of the soldering iron should be 360 °C or less, 4 seconds.
And resoldering with a soldering iron should be limited to 1 time, and after that should be cooling these.
5. Mounting side
External force must be less than 5.0 [N] : while mounting.
6. Storage conditions
Normal temperature (–5 to 35 °C), normal humidity (85 % RH max.), shall not be exposed to direct sunlight and
harmful gases and care should be taken so as not to cause dew.
<Package markings>
Package markings include the product number, quantity, and country of origin.
In principle, the country of origin should be indicated in English.
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
02 Sep. 2014
相关型号:
©2020 ICPDF网 联系我们和版权申明