ERBRD0R37V [PANASONIC]
Micro Chip Fuse; 微型贴片保险丝
| 型号： | ERBRD0R37V |
| 厂家： | 
PANASONIC |
| 描述： | Micro Chip Fuse |
| 文件： | 总5页 (文件大小：156K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
Micro Chip Fuse
Micro Chip Fuse
Type:
ERBRD
ERBRE
ERBRG
■ Features
● Small size
● Fast-acting and withstanding in-rush current characteristics
● RoHS compliant
■ Approved Safety Standards
UL248-14 : File No.E194052
c-UL C22.2 No.248-14 : File No.E194052
■ Explanation of Part Numbers
1
2
3
4
5
6
7
8
9
10
E
R
B
R
D
1
R
0
0
X
Product Code
Structure
Product shape
1005 size
(1.0 mm҂0.5 mm)
Code
Packaging
Pressed Carrier Taping
2 mm pitch, 10,000 pcs.
Punched Carrier Taping
4 mm pitch, 5,000 pcs.
Type
Rated Current (A)
0R25 0.25 A 1R50 1.5 A
0R31 0.315 A 2R00 2.0 A
0R37 0.375 A 2R50 2.5 A
0R50 0.50 A 3R00 3.0 A
0R75 0.75 A 4R00 4.0 A
D
E
X
V
ERBRD
Micro Chip Fuse
R
Rectangular type
ERBRE
ERBRG
1608 size
(1.6 mm҂0.8 mm)
3216 size
(3.2 mm҂1.6 mm)
G
1R00 1.0 A
1R25 1.25 A
5R00 5.0 A
■ Dimensions in mm (not to scale)
■ Construction
L
a
W
Protective Coating
Electrode (Base)
t
b
Fusing Element
Electrode
(Outer)
Dimensions (mm)
Mass (Weight)
(g/1000 pcs.)
Type
(inch size)
L
W
a
b
t
Almina Substrate
ERBRD
(0402)
ERBRE
(0603)
ERBRG
(1206)
0.10
0.15
0.20
+0.10
-0.05
0.10
0.15
0.20
0.10
0.15
0.20
0.10
0.10
0.10
1.00
0.50
0.80
1.60
0.15
0.25
0.30
0.55
0.39
0.7
2.2
10
+0.15
-0.05
1.60
3.20
0.24
0.30
0.54
0.65
0.15
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
00 Sep. 2010
– 388 –
Micro Chip Fuse
■ Ratings
● 1005 (0402 inch) size (Type ERBRD)
ERBRD R
X
२ २२
Part No.
0R25 0R31 0R37 0R50 0R75 1R00 1R25 1R50 2R00 2R50 3R00
Rated Current (A)
Marking Code
0.25
V
0.315 0.375
0.5
F
0.75
G
1.0
H
1.25
J
1.5
K
2.0
N
2.5
O
3.0
P
X
Y
Internal R (m ) at 25 °C max.
700
520
440
310
190
125
82
70
53
42
37
ȑ
Rated Current 100 %/4 hours min.
҂
Fusing Current/Fusing Time
(at 25 °C)
Rated Current 200 %/5 seconds max.
҂
Rated Current 300 %/0.2 seconds max.
҂
Rated Voltage
32 VDC
35 A
(Open Circuit Voltage)
Interrupting Rating
(at Rated Voltage)
Category Temp. Range
−40 °C to 125 °C
＋
● 1608 (0603 inch) size (Type ERBRE)
ERBRE R
V
२ २२
Part No.
0R50
0R75
0.75
G
1R00
1R25
1.25
J
1R50
1.5
K
2R00
2R50
2.5
O
3R00
4R00
4.0
S
5R00
5.0
T
Rated Current (A)
Marking Code
0.5
F
1.0
H
2.0
N
3.0
P
Internal R (m ) at 25 °C max.
330
190
125
94
72
51
40
33
22
19
ȑ
Rated Current 100 %/4 hours min.
҂
Fusing Current/Fusing Time
(at 25 °C)
Rated Current 200 %/5 seconds max.
҂
Rated Current 300 %/0.2 seconds max.
҂
Rated Voltage
32 VDC
50 A
(Open Circuit Voltage)
Interrupting Rating
(at Rated Voltage)
Category Temp. Range
−40 °C to 125 °C
＋
● 3216 (1206 inch) size (Type ERBRG) Mass production : April 2011
ERBRG R
V
२ २२
Part No.
0R50
0.5
F
0R75
0.75
G
1R00
1.0
H
1R25
1.25
J
1R50
2R00
2R50
3R00
4R00
4.0
S
Rated Current (A)
Marking Code
1.5
K
2.0
N
2.5
O
3.0
P
Internal R (m ) at 25 °C max.
560
340
210
175
115
85
65
45
35
ȑ
Rated Current 100 %/4 hours min.
҂
Fusing Current/Fusing Time
(at 25 °C)
Rated Current 200 %/5 seconds max.
҂
Rated Current 300 %/0.2 seconds max.
҂
Rated Voltage
63 VDC
32 VDC
(Open Circuit Voltage)
Interrupting Rating
(at Rated Voltage)
50 A
−40 °C to 125 °C
Category Temp. Range
＋
✽
✽
The thin type is available about 1005 (0402 inch) size. Please contact us for details.
Please contact us when another rated current is needed.
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
01 Dec. 2010
– 389 –
Micro Chip Fuse
°
■ Fusing Characteristics (25 C typical)
● 1005 (0402 inch) size
● 1608 (0603 inch) size
(Type ERBRD)
(Type ERBRE)
10
10
1
1
0.1
0.1
0.01
0.01
0.001
0.001
✽ Reference Only
✽ Reference Only
0.0001
0.0001
0.1
1
10
Fusing Current (A)
100
0.1
1
10
Fusing Current (A)
100
● 3216 (1206 inch) size
(Type ERBRG)
10
1
0.1
0.01
0.001
✽ Reference Only
0.0001
0.1
1
10
100
Fusing Current (A)
■ Packaging Methods
● Standard Quantity
Type
Kind of Taping
Pitch (P1)
2 mm
Quantity
ERBRD
ERBRE
ERBRG
Pressed Carrier Taping
10000 pcs./ reel
Punched Carrier Taping
4 mm
5000 pcs./ reel
(Unit : mm)
(Unit : mm)
● Carrier Taping
● Taping Reel
P1
P2 P0
Pressed
Carrier
Punched
Carrier
φD0
φC
W1
P1
2 mm pitch
(
T
T
A
)
φA
W2
Type
A
B
W
F
E
Type
φA
φN
φC
W1
W2
0.10
0.10
0.10
0.20
ERBRD 0.68
ERBRE
ERBRG 2.00
1.20
1.85
3.60
ERBRD
ERBRE
ERBRG
+0
–1.5
+1.0
+1.0
0.10
0.15
0.20
0.10
0.05
0.10
0.2
1.0
1.05
8.00
3.50
1.75
180.0
60
13.0
9.0
–0
11.4
–0
Type
P1
P2
P0
4.00
D
φ
T
0
0.10
0.10
0.07
ERBRD 2.00
ERBRE
ERBRG
0.67
0.78
0.84
0.05
+0.10
0.07
2.00
1.50
–0
4.00
0.07
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
00 Sep. 2010
– 390 –
Micro Chip Fuse
■ Recommended Land Pattern
Dimensions (mm)
Type
(inch size)
A
B
C
C
ERBRD(0402) 0.5 to 0.6 1.4 to 1.6 0.4 to 0.6
ERBRE(0603) 0.7 to 0.9 2.0 to 2.2 0.8 to 1.0
ERBRG(1206) 2.0 to 2.4 4.4 to 5.0 1.2 to 1.8
A
B
■ Recommended Soldering Conditions
Recommendations and precautions are described below.
Recommended soldering conditions for reflow
●
· Reflow soldering shall be performed a maximum of
two times.
· Please contact us for additional information when
used in conditions other than those specified.
· Please measure the temperature of the terminals
and study every kind of solder and printed circuit
board for solderability before actual use.
For soldering (Example : Sn/Pb)
Temperature
140 °C to 160 °C
Above 200 °C
235 5 °C
Time
Preheating
Main heating
Peak
60 s to 120 s
30 s to 40 s
max. 10 s
Peak
Preheating
For lead-free soldering (Example : Sn/Ag/Cu)
Temperature
150 °C to 180 °C
Above 230 °C
max. 260 °C
Time
Heating
Preheating
Main heating
Peak
60 s to 120 s
30 s to 40 s
max. 10 s
Time
Recommended soldering conditions for flow
●
For soldering
For lead-free soldering
Temperature
140 °C to 180 °C
245 5 °C
Time
60 s to 120 s
20 s to 30 s
Temperature
150 °C to 180 °C
max. 260 °C
Time
60 s to 120 s
max. 10 s
Preheating
Soldering
<Repair with hand soldering>
Preheat with a blast of hot air or similar method. Use a soldering iron with a tip temperature of 350 °C or less. Solder
each electrode for 3 seconds or less.
Never touch this product with the tip of a soldering iron.
●
●
Safety Precautions
The following are precautions for individual products. Please also refer to the common precautions shown on page 4
of this catalog.
1. Set the rated current so that the current passing through the Micro Chip Fuses (hereafter called the fuses)
under normal conditions is within 70% of the rated current.
2. Do not continuously pass a current exceeding the rated current through the fuses.
3. If a pulse exceeding the rated current is applied, such as a rush current or surge current at power-on, take
care not to cause unwanted fusing. Calculate the I2t value of the pulse and check the tolerance to the number
of pulses according to the I2t-t characteristic curve before deciding to use the fuses. Before checking the
tolerance, consult our sales staff in advance.
4. The fuses are designed to be blown out by a current that is double or greater than the rated current. Ensure
that the abnormal current generated when a circuit abnormality occurs in your product is at least double or
greater than the rated current of the fuses. In addition, ensure that the abnormal current of your product does not
exceed the maximum interrupting current of the fuses.
5. The fuses are designed to be used on the secondary side of a power supply. Do not use them on the primary
side.
6. Ensure that the voltage applied to the fuses are within their rated voltage.
7. The fusing characteristics of the fuses are affected by the ambient temperature. Before use, mount the fuses
on your products and carefully check and evaluate their category temperature range.
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
00 Sep. 2010
– 391 –
Safety Precautions (Common precautions for Fixed Resistors, Noise Suppression Device, ESD Suppressor, fuses, and MR Sensors)
• When using our products, no matter what sort of equipment they might be used for, be sure to make a written
agreement on the specifications with us in advance. The design and specifications in this catalog are subject
to change without prior notice.
• Do not use the products beyond the specifications described in this catalog.
• This catalog explains the quality and performance of the products as individual components. Before use, check
and evaluate their operations when installed in your products.
• Install the following systems for a failsafe design to ensure safety if these products are to be used in equipment
where a defect in these products may cause the loss of human life or other significant damage, such as damage to
vehicles (automobile, train, vessel), traffic lights, medical equipment, aerospace equipment, electric heating
appliances, combustion/gas equipment, rotating equipment, and disaster/crime prevention equipment.
Systems equipped with a protection circuit and a protection device
Systems equipped with a redundant circuit or other system to prevent an unsafe status in the event of a single fault
✽
✽
(1) Precautions for use
• These products are designed and manufactured for general and standard use in general electronic equipment
(e.g. AV equipment, home electric appliances, office equipment, information and communication equipment)
• These products are not intended for use in the following special conditions. Before using the products,
carefully check the effects on their quality and performance, and determine whether or not they can be used.
1. In liquid, such as water, oil, chemicals, or organic solvent
2. In direct sunlight, outdoors, or in dust
3. In salty air or air with a high concentration of corrosive gas, such as Cl2, H2S, NH3, SO2, or NO2
4. Electric Static Discharge (ESD) Environment (except ESD Suppressors)
These components are sensitive to static electricity and can be damaged under static shock (ESD).
Please take measures to avoid any of these environments.
Smaller components are more sensitive to ESD environment.
5. Electromagnetic Environment
Avoid any environment where strong electromagnetic waves exist.
6. In an environment where these products cause dew condensation
7. Sealing or coating of these products or a printed circuit board on which these products are mounted, with
resin or other materials
• These products generate Joule heat when energized. Carefully position these products so that their heat will
not affect the other components (except Thermal Cutoffs).
• Carefully position these products so that their temperatures will not exceed the category temperature range due
to the effects of neighboring heat-generating components. Do not mount or place heat-generating components
or inflammables, such as vinyl-coated wires, near these products (except Thermal Cutoffs).
• Note that non-cleaning solder, halogen-based highly active flux, or water-soluble flux may deteriorate the
performance or reliability of the products.
• Carefully select a flux cleaning agent for use after soldering. An unsuitable agent may deteriorate the performance
or reliability. In particular, when using water or a water-soluble cleaning agent, be careful not to leave water
residues. Otherwise, the insulation performance may be deteriorated.
(2) Precautions for storage
The performance of these products, including the solderability, is guaranteed for a year from the date of arrival
at your company, provided that they remain packed as they were when delivered and stored at a temperature
of 5 °C to 35 °C and a relative humidity of 45 % to 85 %.
The performance of EMI Filters is guaranteed for 6 months or a year after our delivery, provided that they are stored
at a temperature of -5 °C to +40 °C and a relative humidity of 40 % to 60 %. Check the guarantee period in the
specifications. The performance of Thermal Cutoffs is guaranteed for a year after our delivery, provided that they are
stored at a temperature of -10 °C to +40 °C and a relative humidity of 30 % to 75 %.
Even within the above guarantee periods, do not store these products in the following conditions. Otherwise,
their electrical performance and/or solderability may be deteriorated, and the packaging materials (e.g. taping
materials) may be deformed or deteriorated, resulting in mounting failures.
1. In salty air or in air with a high concentration of corrosive gas, such as Cl2, H2S, NH3, SO2, or NO2
2. In direct sunlight
<Package markings>
Package markings include the product number, quantity, and country of origin.
In principle, the country of origin should be indicated in English.
00 Sep. 2010
– 4 –
相关型号：
©2020 ICPDF网 联系我们和版权申明