ERBSD3R00U [PANASONIC]
Micro Chip Fuse; 微型贴片保险丝型号: | ERBSD3R00U |
厂家: | PANASONIC |
描述: | Micro Chip Fuse |
文件: | 总5页 (文件大小:139K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Micro Chip Fuse
Planed final production : Sep.2011
Micro Chip Fuse
Type:
ERBSE
ERBSD
■ Features
● Small size
● Fast-acting and withstanding in-rush current characteristics
■ Approved Safety Standards
● UL248-14 : File No.E194052
● c-UL(CSA)C22.2 No.248-14 : File No.E194052
■ Explanation of Part Numbers
1
2
3
4
5
6
7
8
9
10
E
R
B
S
E
1
R
0
0
U
Product Code
Fusing Characteristics
Fast-acting and
Product shape
1608 size
(1.6 mm҂0.8 mm)
Packaging
Punched carrier taping
Rated Current (A)
U
0R25 0.25 A 1R50 1.5 A
0R31 0.315 A 2R00 2.0 A
0R37 0.375 A 2R50 2.5 A
E
Micro Chip Fuse
withstanding in-rush
current
S
1005 size
(1.0 mm҂0.5 mm)
D
0R50 0.5 A
3R00 3.0 A
0R75 0.75 A 4R00 4.0 A
1R00 1.0 A
1R25 1.25 A
5R00 5.0 A
■ Dimensions in mm (not to scale)
■ Construction
Marking
a
Fusing Element
Ceramic Core
Protective Coating
t
Electrode
(Outer)
L
W
Trimming
Dimensions (mm)
Type
(inches)
L
W
a
t
ERBSE
(0603)
ERBSD
(0402)
0.15
0.10
0.15
0.10
0.20
0.15
0.10
0.10
1.60
0.80
0.50
0.30
0.70
1.00
0.20
0.40
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Dec. 2007
Micro Chip Fuse
■ Ratings
● 1608 Size
ERBSE R
U
२ २२
Part No.
0R50
0.5
F
0R75
0.75
G
1R00
1.0
H
1R25
1.25
J
1R50
1.5
K
2R00
2R50
2.5
O
3R00
3.0
P
4R00
4.0
S
5R00
5.0
T
Rated Current (A)
Marking Code
2.0
N
Internal R (m ) at 25 °C max.
370
245
155
120
90
60
48
36
28
20
ȑ
Rated Current 100 %/4 hours min.
҂
Fusing Current/Fusing Time
(at 25 °C)
Rated Current 200 %/5 seconds max.
҂
Rated Current 300 %/0.2 seconds max.
҂
Rated Voltage
32 VDC
50 A
(Open Circuit Voltage)
Interrupting Rating
(at Rated Voltage)
35 A
Category Temp. Range
(Operating Temp. Range)
−40 °C to +100 °C
● 1005 Size
ERBSD R
U
२ २२
Part No.
0R25 0R31 0R37 0R50 0R75 1R00 1R25 1R50 2R00 2R50 3R00
Rated Current (A)
Marking Code
0.25
V
0.315 0.375
0.5
F
0.75
G
1.0
H
1.25
J
1.5
K
2.0
N
2.5
O
3.0
P
X
Y
Internal R (m ) at 25 °C max.
700
570
460
330
200
135
100
80
53
40
33
ȑ
Rated Current 100 %/4 hours min.
҂
Fusing Current/Fusing Time
(at 25 °C)
Rated Current 200 %/5 seconds max.
҂
Rated Current 300 %/0.2 seconds max.
҂
Rated Voltage
(Open Circuit Voltage)
24 VDC
35 A
Interrupting Rating
(at Rated Voltage)
Category Temp. Range
(Operating Temp. Range)
−40 °C to +100 °C
70 °C
Power Derating Curve
100
80
60
40
20
0
•For Circuit, current rating shall be derated in
accordance with the figure on the right.
•This current derating curve is for fusing
characteristics.
100 °C
–40 –20
0
20 40 60 80 100 120 140
Ambient Temperature (°C)
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Dec. 2007
Micro Chip Fuse
°
■ Fusing Characteristics (25 C typical)
–t Characteristics
● Type ERBSE
10
● I
● Type ERBSD
10
1
1
0.1
0.1
0.01
0.01
0.001
0.001
✽ Reference Only
✽ Reference Only
0.0001
0.1
0.0001
0.1
1
10
100
1
10
100
Fusing Current (A)
Fusing Current (A)
2t–t Characteristics
● I
● Type ERBSE
● Type ERBSD
5.0 A
100
4.0 A
3.0 A
2.5 A
2.0 A
1.5 A
1.25 A
1.0 A
0.75 A
100
3.0 A
2.5 A
2.0 A
10
1
1.5 A
10
1
1.25 A
1.0 A
0.75 A
0.5 A
0.5 A
0.375 A
0.315 A
0.25 A
0.1
0.1
0.01
0.001
0.01
0.001
✽ Reference Only
✽ Reference Only
0.0001
0.0001
0.0001
0.0001
0.001
0.01
t (s)
0.1
1
0.001
0.01
t (s)
0.1
1
■ Packaging Methods
● Standard Quantity
Type
ERBSE
ERBSD
Kind of Taping
Pitch (P1)
4 mm
2 mm
Quantity
5000 pcs./ reel
10000 pcs./ reel
Punched Carrier Taping
● Punched Carrier Taping
● Taping Reel
T
Sprocket hole
Compartment
φC
φD0
A
Taping running direction
T
Chip component P1 P2 P0
φA
W
Type
ERBSE 1.00
ERBSD 0.65
A
B
1.80
1.15
W
F
E
φA
φB
φC
W
T
Dimen
sions
(mm)
Dimensions
0.10
0.05
0.20
0.05
0.20
0.10
0.05
0.10
+0
1.0
1.0
1.0
(mm)
8.00
3.50
1.75
180.0
60 min. 13.0
9.0
11.4
−3.0
Type
ERBSE 4.00
ERBSD 2.00
P1
P2
P0
4.00
D
T
0.85
0.60
φ
0
Dimen
sions
(mm)
0.10
0.10
0.07
0.07
0.05
+0.10
–0
2.00
1.50
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Dec. 2007
Micro Chip Fuse
■ Recommended Land Pattern
Dimensions (mm)
Type
C
A
B
C
ERBSE
ERBSD
0.9
0.6
2.1 to 2.3
1.4 to 1.6
0.8
0.5
A
B
■ Recommended Soldering Conditions
Recommendations and precautions are described below.
Recommended soldering conditions for reflow
●
·Reflow soldering shall be performed a maximum of
two times.
·Please contact us for additional information when
used in conditions other than those specified.
·Please measure the temperature of the terminals and
study every kind of solder and printed circuit board
for solderability before actual use.
For soldering (Example : Sn/Pb)
Temperature
Time
Preheating
Main heating
Peak
140 °C to 160 °C
Above 200 °C
235 5 °C
60 s to 120 s
30 s to 40 s
max. 10 s
Peak
For lead-free soldering (Example : Sn/Ag/Cu)
Preheating
Temperature
150 °C to 180 °C
Above 230 °C
max. 260 °C
Time
Preheating
Main heating
Peak
60 s to 120 s
30 s to 40 s
max. 10 s
Heating
Time
<Repair with hand soldering>
Preheat with a blast of hot air or similar method. Use a soldering iron with a tip temperature of 350 °C or less. Solder
each electrode for 3 seconds or less.
Never touch this product with the tip of a soldering iron.
●
●
Safety Precautions
The following are precautions for individual products. Please also refer to the precautions common to EMI Filters,
Fuses, and Sensors(MR Elements) shown on page EX2 of this catalog.
1. Set the rated current so that the current passing through the Micro Chip Fuses (hereafter called the fuses)
under normal conditions is within 70% of the rated current.
2. Do not continuously pass a current exceeding the rated current through the fuses.
3. If a pulse exceeding the rated current is applied, such as a rush current or surge current at power-on, take
care not to cause unwanted fusing. Calculate the I2t value of the pulse and check the tolerance to the number
of pulses according to the I2t-t characteristic curve before deciding to use the fuses. Before checking the
tolerance, consult our sales staff in advance.
4. The fuses are designed to be blown out by a current that is double or greater than the rated current. Ensure
that the abnormal current generated when a circuit abnormality occurs in your product is at least double or
greater than the rated current of the fuses. In addition, ensure that the abnormal current of your product does not
exceed the maximum interrupting current of the fuses.
5. The fuses are designed to be used on the secondary side of a power supply. Do not use them on the primary
side.
6. Ensure that the voltage applied to the fuses are within their rated voltage.
7. The fusing characteristics of the fuses are affected by the ambient temperature. Before use, mount the fuses
on your products and carefully check and evaluate their operating temperature range.
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Feb. 2006
Safety Precautions (Common precautions for EMI Filters, Fuses, and Sensors[MR Elements])
• When using our products, no matter what sort of equipment they might be used for, be sure to make a written
agreement on the specifications with us in advance. The design and specifications in this catalog are subject
to change without prior notice.
• Do not use the products beyond the specifications described in this catalog.
• This catalog explains the quality and performance of the products as individual components. Before use, check
and evaluate their operations when installed in your products.
• Install the following systems for a failsafe design to ensure safety if these products are to be used in equipment
where a defect in these products may cause the loss of human life or other significant damage, such as damage to
vehicles (automobile, train, vessel), traffic lights, medical equipment, aerospace equipment, electric heating
appliances, combustion/gas equipment, rotating equipment, and disaster/crime prevention equipment.
Systems equipped with a protection circuit and a protection device
Systems equipped with a redundant circuit or other system to prevent an unsafe status in the event of a single fault
✽
✽
(1) Precautions for use
• These products are designed and manufactured for general and standard use in general electronic equipment
(e.g. AV equipment, home electric appliances, office equipment, information and communication equipment)
• These products are not intended for use in the following special conditions. Before using the products,
carefully check the effects on their quality and performance, and determine whether or not they can be used.
1. In liquid, such as water, oil, chemicals, or organic solvent
2. In direct sunlight, outdoors, or in dust
3. In salty air or air with a high concentration of corrosive gas, such as Cl2, H2S, NH3, SO2, or NO2
4. Electric Static Discharge (ESD) Environment
These components are sensitive to static electricity and can be damaged under static shock (ESD).
Please take measures to avoid any of these environments.
Smaller components are more sensitive to ESD environment.
5. Electromagnetic Environment
Avoid any environment where strong electromagnetic waves exist.
6. In an environment where these products cause dew condensation
7. Sealing or coating of these products or a printed circuit board on which these products are mounted, with
resin or other materials
• These products generate Joule heat when energized. Carefully position these products so that their heat will
not affect the other components.
• Carefully position these products so that their temperatures will not exceed the category temperature range due
to the effects of neighboring heat-generating components. Do not mount or place heat-generating components
or inflammables, such as vinyl-coated wires, near these products (except Thermal Cutoffs).
• Note that non-cleaning solder, halogen-based highly active flux, or water-soluble flux may deteriorate the
performance or reliability of the products.
• Carefully select a flux cleaning agent for use after soldering. An unsuitable agent may deteriorate the performance
or reliability. In particular, when using water or a water-soluble cleaning agent, be careful not to leave water
residues. Otherwise, the insulation performance may be deteriorated.
(2) Precautions for storage
The performance of these products, including the solderability, is guaranteed for a year from the date of arrival
at your company, provided that they remain packed as they were when delivered and stored at a temperature
of 5 °C to 35 °C and a relative humidity of 45 % to 85 %. (Micro Chip Fuses: Guaranteed for 6 months from the
date of arrival at your company)
The performance of EMI Filters is guaranteed for 6 months or a year from the outgoing inspection date indicated on
the packages, provided that they are stored at a temperature of -5 °C to +40 °C and a relative humidity of 40 %
to 60 %. Check the guarantee period in the specifications. The performance of Thermal Cutoffs is guaranteed for a
year from the outgoing inspection date indicated on the packages, provided that they are stored at a temperature of
-10 °C to +40 °C and a relative humidity of 30 % to 75 %.
Even within the above guarantee periods, do not store these products in the following conditions. Otherwise,
their electrical performance and/or solderability may be deteriorated, and the packaging materials (e.g. taping
materials) may be deformed or deteriorated, resulting in mounting failures.
1. In salty air or in air with a high concentration of corrosive gas, such as Cl2, H2S, NH3, SO2, or NO2
2. In direct sunlight
<Package markings>
Package markings include the product number, quantity, and country of origin.
In principle, the country of origin should be indicated in English.
Feb. 2006
– EX2 –
相关型号:
©2020 ICPDF网 联系我们和版权申明