ERJ-T14J180U [PANASONIC]
RES SMD 18 OHM 5% 1/2W 1210;型号: | ERJ-T14J180U |
厂家: | PANASONIC |
描述: | RES SMD 18 OHM 5% 1/2W 1210 |
文件: | 总8页 (文件大小:826K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Anti-Surge Thick Film Chip Resistors
UPGRADE
ERJ P, PA,PM type
ERJ PA2, P03, PA3, P06, P08, PM8, P14 series
Features
● ESD surge characteristics superior to standard metal film resistors
● High reliability
: Metal glaze thick film resistive element and three layers of electrodes
● Suitable for both reflow and flow soldering
● High power 0.20 W : 0402 inch / 1005 mm size (ERJPA2), 0603 inch / 1608 mm size (ERJP03)
0.25 W : 0603 inch / 1608 mm size (ERJPA3)
0.50 W : 0805 inch / 2012 mm size (ERJP06), 1210 inch / 3225 mm size (ERJP14)
0.66 W : 1206 inch / 3216 mm size (ERJP08)
● High precision, High voltage, High resistance value (ERJPM8)
: Limiting element voltage 500 V, Resistance tolerance ±1 %, TCR ±100 (x 10-6 / K)
● Reference standard
● AEC-Q200 compliant
● RoHS compliant
: IEC 60115-8,JIS C 5201-8,JEITA RC-2134C
■ As for packaging methods, land pattern, soldering conditions and safety precautions,
please see data files.
Explanation of part numbers
1
2
3
4
5
6
7
9
10
11
12
8
E
R
J
P
0
6
D
1
0
0
2
V
Product code
Size, Power rating
Resistance tolerance
Resistance value
Packaging methods
Code inch size Power rating
Tolerance
±0.5 %
±1 %
Code
Packaging
Part No.
ERJPA2
Code
The first two or three digits are
significant figures of resistance and
the third or fourth one denotes
number of zeros following.
Three digit type (±5 %),
Four digit type (±1 %, ±0.5 %)
Example:
Thick film
chip resistors
D
F
J
PA2
P03
PA3
P06
P08
PM8
P14
0402
0603
0603
0805
0.20 W
0.20 W
0.25 W
0.50 W
Punched carrier Ttaping
2 mm pitch, 10,000 pcs
X
ERJP03
ERJPA3
ERJP06
ERJP08
ERJPM8
±5 %
Punched carrier taping
4 mm pitch, 5,000 pcs
V
222 →ꢀ2.2 KΩ
1002ꢀ→ꢀ10 KΩ
1206
1210
0.66 W
0.50 W
Embossed carrier taping
4 mm pitch, 5,000 pcs
U
ERJP14
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
27-Jul-21
Anti-Surge Thick Film Chip Resistors
Ratings
Limiting
element
voltage*2
(V)
Maximum
overload
voltage*3
(V)
Category
temperature AEC-Q200
Power rating*1
Resistance
tolerance
(%)
Resistance
range
(Ω)
T.C.R.
(×10-6/K)
Part No.
(inch size)
(70 ℃)
(W)
range
(℃)
Grade
10 to 1 M (E24, E96)
±100
±200
±150
±200
±0.5, ±1
±5
ERJPA2
(0402)
0.20
0.20
50
100
200
200
Grade 1
10 to 1 M
(E24)
10 to 1 M (E24, E96)
10 to 1 M (E24, E96)
±0.5
±1
ERJP03
(0603)
150
150
Grade 0
Grade 0
: –150 to +400
: ±200
R<10Ω
10Ω≤R
1 to 1 M
(E24)
±5
10 to 1 M (E24, E96)
1 to 1.5 M (E24)
±100
±200
: ±300
±0.5, ±1
±5
ERJPA3
(0603)
0.25
(105 ℃)
R<33Ω
33Ω≤R
10 to 1 M (E24, E96)
±0.5, ±1
: ±100
ERJP06
(0805)
: –100 to +600
: ±300
–55 to +155
0.50
400
600
Grade 0
R<10Ω
1 to 3.3 M
(E24)
10Ω≤R<33Ω
±5
: ±200
33Ω≤R
10 to 1 M (E24, E96)
1 to 10 M (E24)
±100
±0.5, ±1
±5
ERJP08
(1206)
: –100 to +600
: ±200
R<10Ω
10Ω≤R
0.66
0.66
0.50
500
500
200
1000
1000
400
Grade 0
Grade 0
Grade 0
ERJPM8
(1206)
1 M ~ 10 M (E24, E96)
10 to 1 M (E24, E96)
±100
NEW
±1
±0.5, ±1
±5
±100
: –100~ to +600
ERJP14
(1210)
R<10Ω
10Ω≤R
1 to 1 M
(E24)
: ±200
*1: Use it on the condition that the case temperature is below the upper category temperature.
*2: Rated Continuous Working Voltage (RCWV) shall be determined from RCWV=√Power Rating × Resistance Value,
or Limiting Element Voltage listed above, whichever less.
*3: Overload Test Voltage (OTV) shall be determined from OTV=Specified Magnification (refer to performance) × RCWV
or Maximum Overload Voltage listed above, whichever less.
-55 ℃
70 ℃
105 ℃
Power derating curve
For resistors operated in rated temperatures
above 70 ℃ or 105 ℃, power rating shall be
derated in accordance with the figure on the right.
✽ When the temperature of ERJP14 is 155 ℃
or less, the derating start temperature can be
changed to 125 ℃. (See the dotted line)
100
80
125 ℃
ERJP06,
ERJPA3
P08,
PM8
60
40
20
0
ERJPA2,P03,
P14
155 ℃
60 80 100 120 140 160 180
-60 -40 -20
0
20
40
Ambient temperature (℃)
Construction
Protective coating
Electrode (Inner)
Electrode (Between)
Alumina substrate
Electrode (Outer)
Thick film resistive element
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
27-Jul-21
Anti-Surge Thick Film Chip Resistors
Dimensions in mm (not to scale)
L
a
W
t
b
Unit : mm
Mass (Weight)
Dimensions
a
Part No.
(g/1000 pcs)
L
W
b
t
ERJPA2
ERJP03
ERJPA3
ERJP06
1.00±0.05
1.60±0.15
1.60±0.15
2.00±0.20
0.50±0.05
0.20±0.15
0.15+0.15/-0.10
0.15+0.15/-0.10
0.25±0.20
0.40±0.20
0.35±0.20
0.25±0.05
0.30±0.15
0.25±0.10
0.40±0.20
0.50±0.20
0.50±0.20
0.35±0.05
0.45±0.10
0.45±0.10
0.60±0.10
0.60±0.10
0.60±0.10
0.8
2
0.80+0.15/-0.05
0.80+0.15/-0.05
1.25±0.10
2
4
ERJP08,PM8 3.20+0.05/-0.20
ERJP14 3.20±0.20
1.60+0.05/-0.15
2.50±0.20
10
16
ESD Characteristic
Size
(inch)
R
R
0402
0603, 0805, 1206, 1210
1.5 kΩ
100 pF
±1 kV
R=0 Ω(≤1.5 kΩ) / 150 Ω(>1.5 kΩ)
C
E
150 pF
±3 kV
Sample
E
C
Anti-Surge Thick Film Chip Resistors (ERJP Series)
Thick Film Chip Resistors (ERJ Series)
ERJPA2 (0402 inch /1005 mm size)
ERJP03, PA3 (0603 inch /1608 mm size)
5
5
0
ERJPA3
ERJPA2
0
サRCE
-5
-5
ERJP03
ERJ3G
ERJ2G
11±1kV
-10
-15
-20
-25
-30
-10
R1±3kV
-15
-20
-25
-30
10 Ω
100 Ω
1 kΩ 10 kΩ
100 kΩ 1 MΩ
10 Ω
100 Ω
1 kΩ 10 kΩ 100 kΩ 1 MΩ
ERJP08, PM8 (1206 inch / 3216 mm size)
ERJP06 (0805 inch / 2012 mm size)
5
0
5
0
ERJP08
ERJPM8
ERJP06
ERJ6G
-5
-5
ERJ8G
-10
-10
-15
-20
-25
-30
-15
-20
-25
-30
10 Ω
100 Ω
1 kΩ
10 kΩ 100 kΩ 1 MΩ
10 Ω
100 Ω
1 kΩ 10 kΩ
1 MΩ
100 kΩ
ERJP14 (1210 inch / 3225 mm size)
5
0
ERJP14
-5
ERJ14
-10
-15
-20
-25
-30
※This data is for reference purposes.
Please check with the actual equipment before use.
10 Ω
100 Ω
1 kΩ 10 kΩ 100 kΩ
1 MΩ
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
27-Jul-21
Anti-Surge Thick Film Chip Resistors
Performance
Performance requirements ⊿R
Within specified tolerance
Within specified T. C. R.
Test item
Resistance
T. C. R.
Test conditions
20 ℃
+25 ℃ / +155 ℃ (ERJPA2 : +125 ℃)
ERJP06
: Rated voltag× 1.77, 5 s
: Rated voltag× 2.0, 5 s
: Rated voltag× 2.5, 5 s
±2 %
ERJPA2, ERJPA3,
ERJP08, ERJPM8
Overload
Only when it is ERJP03 (D),
P14 (D) : ±0.5 %
ERJP03, ERJP14
Resistance to soldering
heat
D:±0.5 %, F, J:±1 %
270 ℃, 10 s
Rapid change of
temperature
–55 ℃ (30min.) / +155 ℃ (ERJPA2 : +125 ℃)
(30min.),100 cycles
±1 %
±1 %
±1 %
High temperature
exposure
+155 ℃, 1000 h
Damp heat,
Steady state
60 ℃, 90 % to 95 %RH, 1000 h
±3 %
Only when it is ERJP03 (D),
P14 (D) : ±1 %
60 ℃, 90 % to 95 %RH, Rated voltage,
1.5 h ON / 0.5 h OFF cycle, 1000 h
Load life in humidity
±3 %
Endurance at 70 ℃
(ERJPA3 : 105 ℃)
70 ℃ (ERJPA3 : +105 ℃),Rated voltage,
1.5 h ON / 0.5 h OFF cycle, 1000 h
Only when it is ERJP03 (D),
P14 (D) : ±1 %
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
27-Jul-21
*XLGHOLQHVꢀDQGꢀSUHFDXWLRQVꢀUHJDUGLQJꢀWKH
WHFKQLFDOꢀLQIRUPDWLRQꢀDQGꢀXVHꢀRIꢀRXUꢀSURGXFWV
GHVFULEHGꢀLQꢀWKLVꢀRQOLQHꢀFDWDORJꢂ
ٹ
ꢀ,Iꢀ\RXꢀZDQWꢀWRꢀXVHꢀRXUꢀSURGXFWVꢀGHVFULEHGꢀLQꢀWKLVꢀRQOLQHꢀFDWDORJꢀIRUꢀDSSOLFDWLRQVꢀUHTXLULQJꢀ ꢀVSHFLDOꢀTXDOLWLHVꢀRUꢀUHOLDELOLW\ꢁꢀRUꢀIRUꢀDSSOLFDWLRQVꢀZKHUHꢀWKHꢀIDLOXUHꢀRUꢀPDOIXQFWLRQꢀRIꢀWKHꢀ
ꢀSURGXFWVꢀPD\ꢀGLUHFWO\ꢀMHRSDUGL]HꢀKXPDQꢀOLIHꢀRUꢀSRWHQWLDOO\ꢀFDXVHꢀSHUVRQDOꢀLQMXU\ꢀ
ꢀꢂHꢃJꢃꢀDLUFUDIWꢀDQGꢀDHURVSDFHꢀHTXLSPHQWꢁꢀWUDIILFꢀDQGꢀWUDQVSRUWDWLRQꢀHTXLSPHQWꢁꢀFRPEXVWLRQꢀ
ꢀHTXLSPHQWꢁꢀPHGLFDOꢀHTXLSPHQWꢁꢀDFFLGHQWꢀSUHYHQWLRQꢁꢀDQWLꢄFULPHꢀHTXLSPHQWꢁꢀDQGꢅRUꢀVDIHW\ꢀ
ꢀHTXLSPHQWꢆꢁꢀLWꢀLVꢀQHFHVVDU\ꢀWRꢀYHULI\ꢀZKHWKHUꢀWKHꢀVSHFLILFDWLRQVꢀRIꢀRXUꢀSURGXFWVꢀILWꢀWRꢀVXFKꢀ
ꢀDSSOLFDWLRQVꢃꢀ3OHDVHꢀHQVXUHꢀWKDWꢀ\RXꢀZLOOꢀDVNꢀDQGꢀFKHFNꢀZLWKꢀRXUꢀLQTXLU\ꢀGHVNꢀDVꢀWRꢀZKHWKHU
ꢀWKHꢀVSHFLILFDWLRQVꢀRIꢀRXUꢀSURGXFWVꢀILWꢀWRꢀVXFKꢀDSSOLFDWLRQVꢀXVHꢀEHIRUHꢀ\RXꢀXVHꢀRXUꢀSURGXFWVꢃ
ٹ
ꢀ7KHꢀTXDOLW\ꢀDQGꢀSHUIRUPDQFHꢀRIꢀRXUꢀSURGXFWVꢀDVꢀGHVFULEHGꢀLQꢀWKLVꢀRQOLQHꢀFDWDORJꢀRQO\ꢀDSSO\ꢀ ꢀWRꢀRXUꢀSURGXFWVꢀZKHQꢀXVHGꢀLQꢀLVRODWLRQꢃꢀ7KHUHIRUHꢁꢀSOHDVHꢀHQVXUHꢀ\RXꢀHYDOXDWHꢀDQGꢀYHULI\ꢀ
ꢀRXUꢀSURGXFWVꢀXQGHUꢀWKHꢀVSHFLILFꢀFLUFXPVWDQFHVꢀLQꢀZKLFKꢀRXUꢀSURGXFWVꢀDUHꢀDVVHPEOHGꢀLQꢀ\RXUꢀ
ꢀRZQꢀSURGXFWVꢀDQGꢀLQꢀZKLFKꢀRXUꢀSURGXFWVꢀZLOOꢀDFWXDOO\ꢀEHꢀXVHGꢃ
ٹ
ꢀ,Iꢀ\RXꢀXVHꢀRXUꢀSURGXFWVꢀLQꢀHTXLSPHQWꢀWKDWꢀUHTXLUHVꢀDꢀKLJKꢀGHJUHHꢀRIꢀUHOLDELOLWꢀUHJDUGOHVVꢀ ꢀRIꢀWKHꢀDSSOLFDWLRQꢁꢀLWꢀLVꢀUHFRPPHQGHGꢀWKDWꢀ\RXꢀVHWꢀXSꢀSURWHFWLRQꢀFLUFXLWVꢀDQGꢀUHGXQGDQF\ꢀ
ꢀFLUFXLWVꢀLQꢀRUGHUꢀWRꢀHQVXUHꢀVDIHW\ꢀRIꢀ\RXUꢀHTXLSPHQWꢃ
ٹ
ꢀ7KHꢀSURGXFWVꢀDQGꢀSURGXFWꢀVSHFLILFDWLRQVꢀGHVFULEHGꢀLQꢀWKLVꢀRQOLQHꢀFDWDORJꢀDUHꢀVXEMHFWꢀWRꢀ ꢀFKDQJHꢀIRUꢀLPSURYHPHQWꢀZLWKRXWꢀSULRUꢀQRWLFHꢃꢀ7KHUHIRUHꢁꢀSOHDVHꢀEHꢀVXUHꢀWRꢀUHTXHVWꢀDQGꢀ
ꢀFRQILUPꢀWKHꢀODWHVWꢀSURGXFWꢀVSHFLILFDWLRQVꢀZKLFKꢀH[SODLQꢀWKHꢀVSHFLILFDWLRQVꢀRIꢀRXUꢀSURGXFWVꢀLQꢀ
ꢀGHWDLOꢁꢀEHIRUHꢀ\RXꢀILQDOL]HꢀWKHꢀGHVLJQꢀRIꢀ\RXUꢀDSSOLFDWLRQVꢁꢀSXUFKDVHꢁꢀRUꢀXVHꢀRXUꢀSURGXFWVꢃ
ٹ
ꢀ7KHꢀWHFKQLFDOꢀLQIRUPDWLRQꢀLQꢀWKLVꢀRQOLQHꢀFDWDORJꢀSURYLGHVꢀH[DPSOHVꢀRIꢀRXUꢀSURGXFWVꢇꢀ ꢀW\SLFDOꢀRSHUDWLRQVꢀDQGꢀDSSOLFDWLRQꢀFLUFXLWVꢃꢀ:HꢀGRꢀQRWꢀJXDUDQWHHꢀWKHꢀQRQꢄLQIULQJHPHQWꢀRIꢀ
ꢀWKLUGꢀSDUW\ꢇVꢀLQWHOOHFWXDOꢀSURSHUW\ꢀULJKWVꢀDQGꢀZHꢀGRꢀQRWꢀJUDQWꢀDQ\ꢀOLFHQVHꢁꢀULJKWꢁꢀRUꢀLQWHUHVWꢀ
LQꢀRXUꢀLQWHOOHFWXDOꢀSURSHUW\ꢃ
ٹ
ꢀ,IꢀDQ\ꢀRIꢀRXUꢀSURGXFWVꢁꢀSURGXFWꢀVSHFLILFDWLRQVꢀDQGꢅRUꢀWHFKQLFDOꢀLQIRUPDWLRQꢀLQꢀWKLVꢀRQOLQHꢀ ꢀFDWDORJꢀLVꢀWRꢀEHꢀH[SRUWHGꢀRUꢀSURYLGHGꢀWRꢀQRQꢄUHVLGHQWVꢁꢀWKHꢀODZVꢀDQGꢀUHJXODWLRQVꢀRIꢀWKHꢀ
ꢀH[SRUWLQJꢀFRXQWU\ꢁꢀHVSHFLDOO\ꢀZLWKꢀUHJDUGꢀWRꢀVHFXULW\ꢀDQGꢀH[SRUWꢀFRQWUROꢁꢀVKDOOꢀEHꢀREVHUYHGꢃꢀ
ꢃ5HJDUGLQJꢀWKHꢀ&HUWLILFDWHꢀRIꢀ&RPSOLDQFHꢀZLWKꢀ
WKHꢀ(8ꢀ5R+6ꢀ'LUHFWLYHꢄ5($&+ꢀ5HJXODWLRQV!
ٹ
ꢀ7KHꢀVZLWFKRYHUꢀGDWHꢀIRUꢀFRPSOLDQFHꢀZLWKꢀWKHꢀ5R+6ꢀ'LUHFWLYHꢅ5($&+ꢀ5HJXODWLRQVꢀYDULHVꢀ ꢀGHSHQGLQJꢀRQꢀWKHꢀSDUWꢀQXPEHUꢀRUꢀVHULHVꢀRIꢀRXUꢀSURGXFWVꢃ
ٹ
ꢀ:KHQꢀ\RXꢀXVHꢀWKHꢀLQYHQWRU\ꢀRIꢀRXUꢀSURGXFWVꢀIRUꢀZKLFKꢀLWꢀLVꢀXQFOHDUꢀZKHWKHUꢀWKRVHꢀSURGXFWVꢀ ꢀDUHꢀFRPSOLDQWꢀZLWKꢀWKHꢀ5R+6ꢀ'LUHFWLYHꢅ5($&+ꢀ5HJXODWLRQꢁꢀSOHDVHꢀVHOHFWꢀꢈ6DOHVꢀ,QTXLU\ꢈꢀLQꢀWKHꢀ
ꢀZHEVLWHꢀLQTXLU\ꢀIRUPꢀDQGꢀFRQWDFWꢀXVꢃ
:HꢀGRꢀQRWꢀWDNHꢀDQ\ꢀUHVSRQVLELOLW\ꢀIRUꢀWKHꢀXVHꢀRIꢀRXUꢀSURGXFWVꢀRXWVLGHꢀWKHꢀVFRSHꢀRIꢀWKHꢀ
VSHFLILFDWLRQVꢁꢀGHVFULSWLRQVꢁꢀJXLGHOLQHVꢀDQGꢀSUHFDXWLRQVꢀGHVFULEHGꢀLQꢀWKLVꢀRQOLQHꢀFDWDORJꢂ
ꢉꢊꢄ2FWꢄꢊꢋ
Fixed Resistors
Safety Precautions (Common precautions for Fixed Resistors)
• When using our products, no matter what sort of equipment they might be used for, be sure to make a written
agreement on the specifications with us in advance. The design and specifications in this catalog are subject to
change without prior notice.
• Do not use the products beyond the specifications described in this catalog.
• This catalog explains the quality and performance of the products as individual components. Before use, check
and evaluate their operations when installed in your products under the actual conditions for use.
• Install the following systems for a failsafe design to ensure safety if these products are to be used in equipment
where a defect in these products may cause the loss of human life or other significant damage, such as
damage to vehicles (automobile, train, vessel), traffic lights, medical equipment, aerospace equipment,
electric heating appliances, combustion/gas equipment, rotating equipment, and disaster/crime prevention
equipment.
✽ Systems equipped with a protection circuit and a protection device.
✽ Systems equipped with a redundant circuit or other system to prevent an unsafe status in the event of a single
fault.
✽ Systems equipped with an arresting the spread of fire or preventing glitch.
(1) Precautions for use
• These products are designed and manufactured for general and standard use in general elec tron ic equipment.
(e.g. AV equipment, home electric appliances, office equipment, information and communication equipment)
For applications in which special quality and reliability are required, or if the failure or malfunction of the
products may directly jeopardize life or cause threat of personal injury (such as for aircraft and aerospace
equipment, traffic and transport equipment, combustion equipment, medical equipment, accident prevention
and anti-theft devices, and safety equipment), please be sure to consult with our sales representative in
advance and to exchange product specifications which conform to such applications.
• These products are not intended for use in the following special conditions. Before using the products, carefully
check the effects on their quality and performance, and determine whether or not they can be used.
1. In liquid, such as water, oil, chemicals, or organic solvent.
2. In direct sunlight, outdoors, or in dust.
3. In salty air or air with a high concentration of corrosive gas, such as Cl2,H2S,NH3,SO2,or NOX .
4. Electric Static Discharge (ESD) Environment.
These components are sensitive to static electricity and can be damaged under static shock (ESD).
ꢀꢀ Please take measures to avoid any of these environments.
Smaller components are more sensitive to ESD environment.
5. Electromagnetic and Radioactive Environment.
Avoid any environment where strong electromagnetic waves and radiation exist.
6. In an environment where these products cause dew condensation.
7. Sealing or coating of these products or a printed circuit board on which these products are mounted, with
resin or other materials.
• These products generate Joule heat when energized. Carefully position these products so that their heat will
not affect the other components.
• Carefully position these products so that their temperatures will not exceed the category temperature range
due to the effects of neighboring heat-generating components. Do not mount or place heat-generating
components or inflammables, such as vinyl-coated wires, near these products.
• Note that non-cleaning solder, halogen-based highly active flux, or water-soluble flux may deteriorate the
performance or reliability of the products.
• Carefully select a flux cleaning agent for use after soldering. An unsuitable agent may deteriorate the
performance or reliability. In particular, when using water or a water-soluble cleaning agent, be careful not to
leave water residues. Otherwise, the insulation performance may be deteriorated.
• Do not apply flux to these products after soldering. The activity of flux may be a cause of failures in these
products.
• Refer to the recommended soldering conditions and set the soldering condition. High peak temperature or
long heating time may impair the performance or the reliability of these products.
• Recommended soldering condition is for the guideline for ensuring the basic characteristics of the products,
not for the stable soldering conditions. Conditions for proper soldering should be set up according to individual
conditions.
01-Oct-19
Fixed Resistors
• Do not reuse any products after removal from mounting boards.
• Do not drop these products. If these products are dropped, do not use them. Such products may have
received mechanical or electrical damage.
• If any doubt or concern to the safety on these products arise, make sure to inform us immediately and
conduct technical examinations at your side.
(2) Precautions for storage
The performance of these products, including the solderability, is guaranteed for a year from the date of
arrival at your company, provided that they remain packed as they were when delivered and stored at
a temperature of 5 °C to 35 °C and a relative humidity of 45 % to 85 %.
Even within the above guarantee periods, do not store these products in the following conditions.
Otherwise, their electrical performance and/or solderability may be deteriorated, and the packaging
materials (e.g. taping materials) may be deformed or deteriorated, resulting in mounting failures.
1. In salty air or in air with a high concentration of corrosive gas, such as Cl2,H2S,NH3,SO2,or NOX .
2. In direct sunlight.
(3) AEC-Q200 Compliant
The products are tested based on all or part of the test conditions and methods defined in AEC-Q200.
Please consult with Panasonic for the details of the product specification and specific evaluation test results,
etc., and please review and approve Panasonic's product specification before ordering.
<Package markings>
Package markings include the product number, quantity, and country of origin.
In principle, the country of origin should be indicated in English.
01-Oct-19
Surface Mount Resistors
Safety Precautions (Common precautions for Surface Mount Resistors)
The following are precautions for individual products. Please also refer to the common precautions for Fixed
Resistors in this catalog.
1. Take measures against mechanical stress during and after mounting of Surface Mount Resistors
(hereafter called the resistors) so as not to damage their electrodes and protective coatings.
Be careful not to misplace the resistors on the land patterns. Otherwise, solder bridging may occur.
2. Keep the rated power and ambient temperature within the specified derating curve.
Some circuit boards, wiring patterns, temperatures of heat generated by adjacent components, or
ambient temper a tures can become factors in the rise of the temperature of the resistors, regardless of
the level of power applied. Therefore, check the conditions before use and op timize them so as not to
damage the boards and peripheral components.
Make sure to contact us before using the resistors under special conditions.
3. If a transient load (heavy load in a short time) like a pulse is expected to be applied, check and evaluate
the operations of the resistors when installed in your products before use. Never exceed the rated power.
Otherwise, the performance and/or reliability of the resistors may be impaired.
4. Transient voltage
If there is a possibility that the transient phenomenon (significantly high voltage applied in a short time)
may occur or that a high voltage pulse may be applied, make sure to evaluate and check the
characteristics of resistors mounted on your product rather than only depending on the calculated power
limit or steady-state conditions.
5. If the resistors are to be used in high frequency circuits, carefully check the operation before use.
Such circuits change the electrical characteristics of the resistors.
Before using halogen-based or other high-activity flux, check the possible effects of the flux residues on the
6.
performance and reliability of the resistors.
7. When soldering with a soldering iron, never touch the resistors'bodies with the tip of the soldering iron.
When using a soldering iron with a high temperature tip, finish soldering as quickly as possible
(within three seconds at 350 °C max.).
8. Mounting of the resistors with excessive or insufficient wetting amount of solder may affect the
connection reliability or the performance of the resistors. Carefully check the effects and apply a proper
amount of solder for use.
9. When the resistors' protective coatings are chipped, flawed, or removed, the characteristics of the
resistors may be impaired. Take special care not to apply mechanical shock during automatic mounting
or cause damage during handling of the boards with the resistors mounted.
10. Do not apply shock to the resistors or pinch them with a hard tool (e.g. pliers and tweezers). Otherwise,
the resistors' protective coatings and bodies may be chipped, affecting their performance.
11. Avoid excessive bending of printed circuit boards in order to protect the resistors from abnormal stress.
12. Do not immerse the resistors in solvent for a long time.
Before using solvent, carefully check the effects of immersion.
13. Do not apply excessive tension to the terminals.
01-Oct-19
相关型号:
©2020 ICPDF网 联系我们和版权申明