ERJ6ENF3002B
更新时间：2024-10-29 17:49:38
品牌：PANASONIC
描述：Fixed Resistor, Metal Glaze/thick Film, 0.1W, 30000ohm, 150V, 1% +/-Tol, 100ppm/Cel, Surface Mount, 0805, CHIP
概述
规格参数
数据手册ERJ6ENF3002B 概述
Fixed Resistor, Metal Glaze/thick Film, 0.1W, 30000ohm, 150V, 1% +/-Tol, 100ppm/Cel, Surface Mount, 0805, CHIP 固定电阻器
ERJ6ENF3002B 规格参数
| 是否无铅： | 不含铅 | 是否Rohs认证： | 符合 |
| 生命周期： | Obsolete | 包装说明： | , 0805 |
| Reach Compliance Code： | compliant | ECCN代码： | EAR99 |
| HTS代码： | 8533.21.00.30 | 风险等级： | 5.71 |
| 其他特性： | STANDARD: IEC-60115-8 | JESD-609代码： | e3 |
| 安装特点： | SURFACE MOUNT | 端子数量： | 2 |
| 最高工作温度： | 125 °C | 最低工作温度： | -55 °C |
| 封装形状： | RECTANGULAR PACKAGE | 包装方法： | BULK |
| 额定功率耗散 (P)： | 0.1 W | 额定温度： | 70 °C |
| 电阻： | 30000 Ω | 电阻器类型： | FIXED RESISTOR |
| 尺寸代码： | 0805 | 表面贴装： | YES |
| 技术： | METAL GLAZE/THICK FILM | 温度系数： | 100 ppm/°C |
| 端子面层： | Matte Tin (Sn) - with Nickel (Ni) barrier | 端子形状： | WRAPAROUND |
| 容差： | 1% | 工作电压： | 150 V |
| Base Number Matches： | 1 |
ERJ6ENF3002B 数据手册
通过下载ERJ6ENF3002B数据手册来全面了解它。这个PDF文档包含了所有必要的细节，如产品概述、功能特性、引脚定义、引脚排列图等信息。
PDF下载Precision Thick Film Chip Resistors
Precision Thick Film Chip Resistors
ERJ R: 0402, 0603, 0805
ERJ E: 0603, 0805, 1206,
1210, 1812
Type: ERJ 2R, 3R, 6R
ERJ 3E, 6E, 8E, 14, 12
n Features
l Small size and lightweight
l Marking
Four digit marking of resistance value on resistive
element side (except 2R, 3R, 6R, 3E Type)
The power rating for one-K size larger is available
for 3E, 6E, 8E type
l High reliability
Metal glaze thick film resistive element and three
layered electrodes.
l
l Compatible with placement machines
l Low Resistance Tolerance
Bulk, taping and magazine packaging available
ERJ2R, 3E, 6E, 8E, 14, 12 Series ...
ERJ2R, 3R, 6R Series ......................
±
±
1%
l Suitable for both reflow soldering and flow soldering
0.5%
l Approved under the ISO 9001 system
Approved under the QS-9000 system
l Reference Standards
IEC 60115-8, JIS C 5201-8
n Explanation of Part Numbers (ERJ2R, 3R, 6R Series, ±0.5 % type)
Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/ or use.
Whenever a doubt about safety arises from this product, please inform us immediately for technical consultation without fail.
Precision Thick Film Chip Resistors
n Explanation of Part Numbers (ERJ2R, 3E, 6E, 8E, 14, 12 Series, ±1 % type)
n Construction
n Dimensions in mm (not to scale)
Dimensions (mm)
Type
Weight
(inches)
(1000 pcs.)
L
W
a
b
t
ERJ2R
(0402)
1.00±0.05 0.50+0.05 0.20±0.10 0.25±0.05 0.35±0.05
0.8 g
2 g
ERJ3R
(0603)
1.60±0.15 0.80
0.30±0.20 0.30±0.15 0.45±0.10
+0.15
Ð0.05
ERJ6R
(0805)
2.00±0.20 1.25±0.10 0.40±0.20 0.40±0.20 0.60±0.10
4 g
ERJ3EK
(0603)
+0.15
1.60±0.15 0.80
0.30±0.20 0.30±0.15 0.45±0.10
2 g
Ð0.05
ERJ6EN
(0805)
2.00±0.20 1.25±0.10 0.40±0.20 0.40±0.20 0.60±0.10
4 g
ERJ8EN
(1206)
+0.05
Ð0.20
+0.05
Ð0.15
3.20
1.60
0.50±0.20 0.50±0.20 0.60±0.10
10 g
16 g
27 g
27 g
ERJ14N
(1210)
3.20±0.20 2.50±0.20 0.50±0.20 0.50±0.20 0.60±0.10
4.50±0.20 3.20±0.20 0.50±0.20 0.50±0.20 0.60±0.10
5.00±0.20 2.50±0.20 0.60±0.20 0.60±0.20 0.60±0.10
ERJ12N
(1812)
ERJ12S
(2010)
Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/ or use.
Whenever a doubt about safety arises from this product, please inform us immediately for technical consultation without fail.
Precision Thick Film Chip Resistors
n Ratings
T.C.R.
Limiting Element
Voltage (Maximum
RCWV)(1) (V)
Resistance Ranges (W)
Type
Power Rating
at 70 ¡C (W)
Maximum Overload Resistance
Standard
´10-6/ûC
(inches)
Voltage(2) (V)
Tolerance (%)
Resistance Values
min.
10
100
110 K
10
max.
91
100 K
1 M
91
(ppm/ûC)
±100
±50
±100
±100
±50
±100
±100
±50
ERJ2R
(0402)
0.063
0.063
0.1
50
50
100
±0.5
±0.5
±0.5
E24
ERJ3R
(0603)
100
200
100
110 K
10
100 K
1 M
91
E24
E24
ERJ6R
(0805)
150
100
110 K
100 K
1 M
±100
ERJ2RK
(0402)
0.063
0.063
(0.1)
0.1
50
50
100
100
200
400
400
400
±1
±1
±1
±1
±1
±1
10
10
10
10
10
10
1 M
±100
±100
±100
±100
±100
±100
E24
ERJ3EK
(0603)
1 M
E24,E96
E24,E96
E24,E96
E24,E96
E24,E96
]
ERJ6EN
(0805)
150
200
200
200
2.2 M
2.2 M
1 M
]
(0.125)
ERJ8EN
(1206)
0.125
]
(0.25)
ERJ14N
(1210)
0.25
0.5
ERJ12N, 12S
(1812), (2010)
1 M
(1) Rated Continuous Working Voltage (RCWV) should be determined from RCWV= Power Rating ´ Resistance Values, or Limiting Element Voltage
Ö
(max. RCWV) listed above, whichever is less.
(2) Overload (Short-time Overload) Test Voltage (SOTV) should be determined from SOTV=2.5 ´ Power Rating or max. Overload Voltage listed above
whichever is less.
] Please contact us when resistors guaranteed for high power are needed.
Power Derating Curve
For resistors operating in ambient temperature above
70 ¡C, power rating should be derated in accordance
with the figure to the right.
Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/ or use.
Whenever a doubt about safety arises from this product, please inform us immediately for technical consultation without fail.
Precision Thick Film Chip Resistors
n Packaging Specifications
l Standard Quantity
Type
(inches)
Thickness
(mm)
Punched (Paper) Taping
(4 mm pitch)
Embossed Taping
Bulk Case
(4 mm pitch)
ERJ2R
0.35
0.45
0.6
10000 pcs./reel(2 mm pitch)
5000 pcs./reel
(0402)
ERJ3R
(0603)
ERJ6R
(0805)
5000 pcs./reel
ERJ2RK
(0402)
0.35
0.45
0.6
10000 pcs./reel(2 mm pitch)
5000 pcs./reel
ERJ3EK
(0603)
25000 pcs./case
10000 pcs./case
ERJ6EN
(0805)
5000 pcs./reel
ERJ8EN
(1206)
0.6
5000 pcs./reel
ERJ14N
(1210)
0.6
5000 pcs./reel
5000 pcs./reel
ERJ12N,12S
(1812), (2010)
0.6
(mm)
l Bulk Case
l Taping Reel
l Embossed Taping
Type
fA
fB
fC
W
T
2R,3R,6R
3EK,6EN,
8EN,14N
Dimensions
(mm)
9.0±1.0 11.4±2.0
13.0±1.0 15.4±2.0
180.0Ð03.0 60 min. 13.0±1.0
12N, 12S
l Punched (Paper) Taping
Type
A
B
W
F
E
P1
14N 2.80±0.20 3.50±0.20 8.00±0.30 3.50±0.05
Dimensions
(mm)
12N 3.50±0.20 4.80±0.20
12S 2.80±0.20 5.30±0.20
1.75±0.10 4.00±0.10
12.00±0.30 5.50±0.05
Type
P2
P0
fD0
t2
fD1
14N
1 min.
Dimensions
(mm)
12N 2.00±0.05 4.00±0.10 1.50+0.10 1.00±0.10
0
1.5 min.
12S
Type
2R
A
B
W
F
E
P1
P2
P0
fD0
T
0.70±0.05
1.20±0.05
1.90±0.10
2.50±0.20
3.60±0.20
2.00±0.10
0.52±0.05
0.70±0.05
Dimensions
(mm)
3R,3EK 1.10±0.10
6R,6EN 1.65±0.15
8.00±0.20
3.50±0.05
1.75±0.10
4.00±0.10
2.00±0.05
4.00±0.10
1.50+0.10
0
0.84±0.05
8EN
2.00±0.15
Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/ or use.
Whenever a doubt about safety arises from this product, please inform us immediately for technical consultation without fail.
Precision Thick Film Chip Resistors
n Recommended Land Pattern
In case of flow soldering, the land width must be smaller than the Chip Resistor width to control the solder amount
properly. Generally, the land width should be 0.7 to 0.8 times (W) of the width of chip resistor. In case of reflow soldering,
solder amount can be adjusted, therefore the land width should be set to 1.0 to 1.3 times chip resistor width (W).
Dimensions (mm)
Type
(inches)
a
b
c
ERJ2R
(0402)
0.5 to 0.6
1.4 to 1.6
0.4 to 0.6
ERJ3R, 3EK
(0603)
ERJ6R, 6EN
(0805)
ERJ8EN
(1206)
ERJ14N
(1210)
ERJ12N
(1812)
ERJ12S
(2010)
0.7 to 0.9
1 to 1.4
2 to 2.4
2 to 2.4
3.3 to 3.7
3.6 to 4
2 to 2.2
3.2 to 3.8
4.4 to 5
4.4 to 5
5.7 to 6.5
6.2 to 7
0.8 to 1
0.9 to 1.4
1.2 to 1.8
1.8 to 2.8
2.3 to 3.5
1.8 to 2.8
n Recommended Soldering Conditions
Recommendations and precautions are described below.
lRecommended soldering conditions for reflow
áReflow soldering shall be two times maximum.
áPlease contact us for additional information when
used in conditions other than those specified.
áPlease measure temperature of terminations and study
solderability for every kind of solder and board, before
actual use.
For soldering (Example : Sn/Pb)
Temperature
Time
Preheating
Main heating
Peak
140 ¡C to 160 ¡C
Above 200 ¡C
235 ± 5 ¡C
60 s to 120 s
30 s to 40 s
max. 10 s
For lead-free soldering (Example : Sn/Ag/Cu)
Temperature
150 ¡C to 180 ¡C
Above 230 ¡C
max. 260 ¡C
Time
Preheating
Main heating
Peak
60 s to 120 s
30 s to 40 s
max. 10 s
lRecommended soldering conditions for flow
For soldering
For lead-free soldering
Temperature
140 ¡C to 160 ¡C
245±5 ¡C
Time
60 s to 120 s
20 s to 30 s
Temperature
150 ¡C to 180 ¡C
max. 260 ¡C
Time
60 s to 120 s
max. 10 s
Preheating
Soldering
Safety Precautions
1. If transient load (heavy load in a short time) like pulse is to be applied, carry out an evaluation
and confirmation test with the resistors actually mounted on the board.
When a load of more than the rated power is applied under load condition at steady state, it
could impair performance and/or reliability of the resistor.
Never exceed the specified rated power.
2. Chlorine type or other highly-reactive flux is not recommended. Residue could affect performance or reliability of
the resistors.
3. When using a soldering iron, never let the tip of the soldering iron touch the body of the chip resistor. When
using a soldering iron with a tip at a high temperature, solder for as short time as possible (no more than three
seconds and up to 350 ¡C).
4. Avoid physical shock to the resistor and nipping of the resistor with hard tool ( pliers or tweezers) as it may
damage protective coating or the body of the resistor and may affect its performance.
Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/ or use.
Whenever a doubt about safety arises from this product, please inform us immediately for technical consultation without fail.
ERJ6ENF3002B 相关器件
| 型号 | 制造商 | 描述 | 价格 | 文档 |
| ERJ6ENF3002V | PANASONIC | Fixed Resistor, Metal Glaze/thick Film, 0.125W, 30000ohm, 150V, 1% +/-Tol, 100ppm/Cel, Surface Mount, 0805, CHIP | 获取价格 |
|
| ERJ6ENF3003V | PANASONIC | Fixed Resistor, Metal Glaze/thick Film, 0.125W, 300000ohm, 150V, 1% +/-Tol, 100ppm/Cel, Surface Mount, 0805, CHIP | 获取价格 |
|
| ERJ6ENF3010B | PANASONIC | Fixed Resistor, Metal Glaze/thick Film, 0.1W, 301ohm, 150V, 1% +/-Tol, 100ppm/Cel, Surface Mount, 0805, CHIP | 获取价格 |
|
| ERJ6ENF3010V | PANASONIC | Fixed Resistor, Metal Glaze/thick Film, 0.125W, 301ohm, 150V, 1% +/-Tol, 100ppm/Cel, Surface Mount, 0805, CHIP | 获取价格 |
|
| ERJ6ENF3011B | PANASONIC | Fixed Resistor, Metal Glaze/thick Film, 0.1W, 3010ohm, 150V, 1% +/-Tol, 100ppm/Cel, Surface Mount, 0805, CHIP | 获取价格 |
|
| ERJ6ENF3011V | PANASONIC | 贴片电阻器（精密级型） | 获取价格 |
|
| ERJ6ENF3012B | PANASONIC | Fixed Resistor, Metal Glaze/thick Film, 0.1W, 30100ohm, 150V, 1% +/-Tol, 100ppm/Cel, Surface Mount, 0805, CHIP | 获取价格 |
|
| ERJ6ENF3012V | PANASONIC | Fixed Resistor, Metal Glaze/thick Film, 0.125W, 30100ohm, 150V, 1% +/-Tol, 100ppm/Cel, Surface Mount, 0805, CHIP | 获取价格 |
|
| ERJ6ENF3013B | PANASONIC | Fixed Resistor, Metal Glaze/thick Film, 0.1W, 301000ohm, 150V, 1% +/-Tol, 100ppm/Cel, Surface Mount, 0805, CHIP | 获取价格 |
|
| ERJ6ENF3013V | PANASONIC | Fixed Resistor, Metal Glaze/thick Film, 0.125W, 301000ohm, 150V, 1% +/-Tol, 100ppm/Cel, Surface Mount, 0805, CHIP | 获取价格 |
|
ERJ6ENF3002B 相关文章
HARTING(浩亭)圆形连接器产品选型手册
- 2024-10-31
- 6
HYCON(宏康科技)产品选型手册
- 2024-10-31
- 6
GREEGOO整流二极管和晶闸管产品选型手册
- 2024-10-31
- 7
西门子豪掷106亿美元，战略收购工程软件巨头Altair
- 2024-10-31
- 8
