ERJ8GEYJ114X [PANASONIC]
Fixed Resistor, Metal Glaze/thick Film, 0.25W, 110000ohm, 200V, 5% +/-Tol, 200ppm/Cel, Surface Mount, 1206, CHIP;型号: | ERJ8GEYJ114X |
厂家: | PANASONIC |
描述: | Fixed Resistor, Metal Glaze/thick Film, 0.25W, 110000ohm, 200V, 5% +/-Tol, 200ppm/Cel, Surface Mount, 1206, CHIP |
文件: | 总4页 (文件大小:308K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Thick Film Chip Resistors
Thick Film Chip Resistors
0201, 0402, 0603, 0805, 1206,
1210, 1812, 2010, 2512
Type: ERJ 1G, 2G, 3G, 6G, 8G, 14,
12, 12Z, 1T
n Features
l Small size and lightweight
l High reliability
Metal glaze thick film resistive element and three layers of electrodes
l Compatible with placement machines
Taping and bulk case packaging available
l Suitable for both reflow and flow soldering
l Approved under the ISO 9001 system
Approved under the QS-9000 system
l Reference Standards
IEC 60115-8, JIS C 5201-8, EIAJ RC-2134A
n Explanation of Part Numbers
Packaging Specifications
Packaging
Code
Punched (Paper) Taping
(Only 3G, 6G, 8G type)
V
Embossed Taping
(Only 14, 12, 12Z, 1T type)
U
B
Bulk case
(Only 2G, 3G, 6G type)
Punched (Paper) Taping
2 mm pitch, 10000 pcs.
(Only 2G, 3G type)
X
Y
C
Punched (Paper) Taping
2 mm pitch, 20000 pcs.
(Only 2G type)
Punched (Paper) Taping
2 mm pitch, 15000 pcs.
(Only 1G type)
] When partly omitted, all the rest P/N factors should be moved up respectively.
Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/ or use.
Whenever a doubt about safety arises from this product, please inform us immediately for technical consultation without fail.
Thick Film Chip Resistors
n Dimensions in mm (not to scale)
n Construction
Dimensions (mm)
Weight
Type
(1000 pcs.)
(inches)
L
W
a
b
t
ERJ1G
(0201)
0.60±0.03 0.30±0.03 0.12±0.05 0.15±0.05 0.25±0.05 0.15 g
ERJ2G
(0402)
1.00±0.05 0.50±0.05 0.20±0.10 0.25±0.05 0.35±0.05
0.8 g
2 g
ERJ3G
(0603)
1.60±0.15 0.80
0.30±0.20 0.30±0.15 0.45±0.10
+0.15
Ð0.05
ERJ6G
(0805)
2.00±0.20 1.25±0.10 0.40±0.20 0.40±0.20 0.60±0.10
4 g
ERJ8G
(1206)
+0.05
Ð0.20
+0.05
Ð0.15
3.20
1.60
0.50±0.20 0.50±0.20 0.60±0.10
10 g
16 g
27 g
27 g
45 g
ERJ14
(1210)
3.20±0.20 2.50±0.20 0.50±0.20 0.50±0.20 0.60±0.10
4.50±0.20 3.20±0.20 0.50±0.20 0.50±0.20 0.60±0.10
5.00±0.20 2.50±0.20 0.60±0.20 0.60±0.20 0.60±0.10
6.40±0.20 3.20±0.20 0.65±0.20 0.60±0.20 0.60±0.10
ERJ12
(1812)
ERJ12Z
(2010)
ERJ1T
(2512)
n Ratings
Power Rating Limiting Element Maximum Overload
T.C.R.
Type
Resistance
Standard
Resistance Range (W)
at 70 ¡C
(W)
Voltage (Maximum
Voltage(2)
(V)
´10-6/¡C
(inches)
Tolerance(%)
Resistance Values
RCWV)(1) (V)
(ppm/¡C)
min.
10
max.
1 M
ERJ1G
(0201)
ERJ2G
(0402)
ERJ3G
(0603)
ERJ6G
(0805)
ERJ8G
(1206)
ERJ14
(1210)
<10 W:
Ð100 to
+600
0.05
0.063
0.1
15
50
30
± 5
± 5
± 5
± 5
± 5
± 5
± 5
± 5
E24
E24
E24
E24
E24
E24
E24
E24
100
100
200
400
400
400
400
1
1
1
1
1
1
1
2.2 M
10 M
10 M
10 M
10 M
10 M
1 M
50
10 W to
1 MW:
±200
0.125
0.25
0.25
0.5
150
200
200
200
200
ERJ12, 12Z
(1812, 2010)
ERJ1T
(2512)
1 MW<:
Ð400 to
+150
1
Rated Current Maximum Overload Current
1G
0.5 A
1 A
2 A
1 A
2 A
4 A
Jumper
2G á 3G
6Gá8Gá14á12á12Zá1T
(1) Rated Continuous Working Voltage (RCWV) should be determined from RCWV= Power Rating ´ Resistance Values, or Limiting Element Voltage
Ö
(max. RCWV) listed above, whichever is less.
(2) Overload (Short-time Overload) Test Voltage (SOTV) should be determined from SOTV=2.5 ´ Power Rating or max. Overload Voltage listed above
whichever is less.
Power Derating Curve
For resistors operating in ambient temperature above
70 ¡C, power rating should be derated in accordance
with the right figure.
Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/ or use.
Whenever a doubt about safety arises from this product, please inform us immediately for technical consultation without fail.
Thick Film Chip Resistors
n Packaging Specifications
l Standard Quantity
Type
(inches)
Thickness
(mm)
Embossed Taping
Punched (Paper) Taping
Bulk Case
(4 mm pitch)
ERJ1G
(0201)
0.25
0.35
0.45
0.6
15000 pcs./reel (2 mm pitch)
ERJ2G
(0402)
10000 pcs./reel (2 mm pitch)
20000 pcs./reel (2 mm pitch)
50000 pcs./case
25000 pcs./case
10000 pcs./case
ERJ3G
(0603)
10000 pcs./reel (2 mm pitch)
5000 pcs./reel (4 mm pitch)]
ERJ6G
(0805)
5000 pcs./reel (4 mm pitch)]
5000 pcs./reel (4 mm pitch)]
ERJ8G
(1206)
0.6
ERJ14
(1210)
0.6
5000 pcs./reel
5000 pcs./reel
4000 pcs./reel
ERJ12,12Z
(1812,2010)
0.6
ERJ1T
(2512)
0.6
] Please consult us if resistors other than shown above are needed.
l Taping Reel
l Bulk Case
(mm)
Type
fA
fB
fC
W
T
Dimensions
(mm)
1G,2G,3G
6G,8G,14
9.0±1.0 11.4±2.0
13.0±1.0 15.4±2.0
180.0Ð03.0 60 min. 13.0±1.0
12,12Z,1T
l Punched (Paper) Taping
l Embossed Taping
Type
A
B
W
F
E
Type
A
B
W
F
E
P1
1G 0.38±0.05 0.68±0.05
2G 0.70±0.05 1.20±0.05
3G 1.10±0.10 1.90±0.10
6G 1.65±0.15 2.50±0.20
8G 2.00±0.15 3.60±0.20
14 2.80±0.20 3.50±0.20 8.00±0.30 3.50±0.05
12 3.50±0.20 4.80±0.20
Dimensions
(mm)
1.75±0.10 4.00±0.10
Dimensions
(mm)
8.00±0.20 3.50±0.05 1.75±0.10
12Z 2.80±0.20 5.30±0.20 12.00±0.30 5.50±0.05
1T 3.60±0.20 6.90±0.20
Type
1G
P1
P2
P0
fD0
T
Type
14
P2
P0
fD0
t
fD1
0.47±0.05
0.52±0.05
0.70±0.05
1 min.
2.00±0.10
Dimensions
(mm)
12
12Z
1T
2G
Dimensions
(mm)
2.00±0.05 4.00±0.10 1.50+0.10 1.00±0.10
0
2.00±0.05 4.00±0.10 1.50+0.10
1.5 min.
3G
0
6G 4.00±0.10
0.84±0.05
8G
Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/ or use.
Whenever a doubt about safety arises from this product, please inform us immediately for technical consultation without fail.
Thick Film Chip Resistors
n Recommended Land Pattern
In case of flow soldering, the land width must be smaller than the Chip Resistor width to control the solder amount
properly. Generally, the land width should be 0.7 to 0.8 times the width of chip the resistor. In case of reflow soldering,
solder amount can be adjusted, therefore the land width should be set to 1.0 to 1.3 times chip resistor width (W).
Dimensions (mm)
Type
(inches)
a
b
c
ERJ1G(0201)
ERJ2G(0402)
ERJ3G(0603)
ERJ6G(0805)
ERJ8G(1206)
ERJ14(1210)
ERJ12(1812)
ERJ12Z(2010)
ERJ1T(2512)
0.3 to 0.4
0.5 to 0.6
0.7 to 0.9
1 to 1.4
2 to 2.4
2 to 2.4
3.3 to 3.7
3.6 to 4
5 to 5.4
0.8 to 0.9 0.25 to 0.35
1.4 to 1.6
2 to 2.2
0.4 to 0.6
0.8 to 1
3.2 to 3.8
4.4 to 5
4.4 to 5
5.7 to 6.5
6.2 to 7
7.6 to 8.6
0.9 to 1.4
1.2 to 1.8
1.8 to 2.8
2.3 to 3.5
1.8 to 2.8
2.3 to 3.5
n Recommended Soldering Conditions
Recommendations and precautions are described below.
lRecommended soldering conditions for reflow
áReflow soldering should be a maximum of two times
áPlease contact us for additional information when
used in conditions other than those specified.
áPlease measure the temperature of terminations and study
every type of printed circuit board for solderability, before
actual use.
For soldering (Example : Sn/Pb)
Temperature
Time
Preheating
Main heating
Peak
140 ¡C to 160 ¡C
Above 200 ¡C
235 ± 5 ¡C
60 s to 120 s
30 s to 40 s
max. 10 s
For lead-free soldering (Example : Sn/Ag/Cu)
Temperature
150 ¡C to 180 ¡C
Above 230 ¡C
max. 260 ¡C
Time
Preheating
Main heating
Peak
60 s to 120 s
30 s to 40 s
max. 10 s
lRecommended soldering conditions for flow
For soldering
For lead-free soldering
Temperature
140 ¡C to 160 ¡C
245±5 ¡C
Time
60 s to 120 s
20 s to 30 s
Temperature
150 ¡C to 180 ¡C
max. 260 ¡C
Time
60 s to 120 s
max. 10 s
Preheating
Soldering
Safety Precautions
1. If transient load (heavy load in a short time) like pulse is to be applied, carry out an evaluation and
confirmation test with the resistors actually mounted on the board.
When a load of more than the rated power is applied under load condition at steady state, it may
impair performance and/or reliability of the resistor.
Never exceed the specified rated power.
2. Chlorine type or other highly-reactive flux is not recommended. Residue could affect performance or reliability of
the resistors.
3. When using a soldering iron, never let the tip of the iron touch the body of the chip resistor. When using a
soldering iron with a tip at a high temperature, solder for as short time as possible (no more than three seconds
and up to 350 ¡C).
4. Avoid physical shock to the resistor and nipping of the resistor with hard tool (pliers or tweezers) as it may
damage the protective coating of the resistor and may affect its performance.
Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/ or use.
Whenever a doubt about safety arises from this product, please inform us immediately for technical consultation without fail.
相关型号:
ERJ8GEYJ115V
Fixed Resistor, Metal Glaze/thick Film, 0.25W, 1100000ohm, 200V, 5% +/-Tol, 400ppm/Cel, Surface Mount, 1206, CHIP, ROHS COMPLIANT
PANASONIC
ERJ8GEYJ11RV
Fixed Resistor, Metal Glaze/thick Film, 0.25W, 11ohm, 200V, 5% +/-Tol, 200ppm/Cel, Surface Mount, 1206, CHIP, ROHS COMPLIANT
PANASONIC
ERJ8GEYJ120KV
Fixed Resistor, Metal Glaze/thick Film, 0.25W, 120000ohm, 200V, 5% +/-Tol, 200ppm/Cel, Surface Mount, 1206, CHIP, ROHS COMPLIANT
PANASONIC
ERJ8GEYJ122X
Fixed Resistor, Metal Glaze/thick Film, 0.25W, 1200ohm, 200V, 5% +/-Tol, 200ppm/Cel, Surface Mount, 1206, CHIP
PANASONIC
ERJ8GEYJ130KV
Fixed Resistor, Metal Glaze/thick Film, 0.25W, 130000ohm, 200V, 5% +/-Tol, 200ppm/Cel, Surface Mount, 1206, CHIP, ROHS COMPLIANT
PANASONIC
©2020 ICPDF网 联系我们和版权申明