ET-PFD510 [PANASONIC]
Mounting should be done by a qualified technician.;
| 型号： | ET-PFD510 |
| 厂家： | 
PANASONIC |
| 描述： | Mounting should be done by a qualified technician. |
| 文件： | 总1页 (文件大小：314K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
S
P
E
C
F
I
L
E
Frame
ET-PFD510
Description
This frame is designed especially for use on the Panasonic’s applicable projector. The frame can also be used for a
dual stack configuration in which two projectors are used together.
Specifications
Dimensions (W × H × D):
712 × 408.5 × 932 mm
(28-1/32 × 16-3/32 × 36-11/16 inches)
Approximately 19.4 kg (42.8 lbs)
PT-DZ21K/DS20K/DW17K
Weight*:
Applicable projector:
Average value. May differ depending on the actual unit.
*
Parts
Frame (already assembled) . . . . . . . . . . . . . . . . . 1
Washer-fitted hexagonal bolts (M6 × 30) . . . . . . 6
Hex bolts (M10 × 140) . . . . . . . . . . . . . . . . . . . . 4
Adjustment nuts (M10) . . . . . . . . . . . . . . . . . . . . 4
Spring washers (M10) . . . . . . . . . . . . . . . . . . . . . 8
Washers (M10) . . . . . . . . . . . . . . . . . . . . . . . . . 16
Hexagonal nuts (M6) . . . . . . . . . . . . . . . . . . . . . . 8
Square washers . . . . . . . . . . . . . . . . . . . . . . . . 16
Caution:
•
•
•
•
Mounting should be done by a qualified technician.
Make sure that the mounting (ceiling) area has sufficient strength.
Read the enclosed mounting instructions thoroughly before starting.
Do not use an electric screwdriver or impact driver to tighten screws. Use a torque driver or hexagon torque
wrench and tighten screws to the torque specified in the instructions.
•
When the product is no longer going to be used, have it disposed of quickly by a professional disposal service.
Dimensions
Illustration shows the frame attached to a projector.
712 (28-1/32)
unit : mm (inch)
NOTE: This illustration is not drawn to scale.
Weights and dimensions shown are approximate. Specifications subject to change without notice.
As of May 2012
1/1
SFD12A012
相关型号：
©2020 ICPDF网 联系我们和版权申明