JQ1-P-B-48V-F
更新时间:2024-09-18 18:00:56
品牌:PANASONIC
描述:Electromechanical Relay, SPDT, Latched, 72VDC (Coil), 10A (Contact), 110VDC (Contact), Random, AC/DC Output
JQ1-P-B-48V-F 概述
Electromechanical Relay, SPDT, Latched, 72VDC (Coil), 10A (Contact), 110VDC (Contact), Random, AC/DC Output 其他继电器
JQ1-P-B-48V-F 规格参数
生命周期: | Obsolete | Reach Compliance Code: | unknown |
风险等级: | 5.84 | 主体宽度: | 10 mm |
主体高度: | 16 mm | 主体长度或直径: | 20 mm |
线圈工作电压(直流): | 38.4 V | 线圈释放电压(直流): | 2.4 V |
线圈电阻: | 5760 Ω | 最大线圈电压(直流): | 72 V |
标称线圈电压: | 48 V | 线圈/输入电源类型: | DC |
触点(交流)最大额定功率R负载: | 1250VA@250VAC | 触点(交流)最大额定R负载: | 10A@250VAC |
最大触点电流(交流): | 10 A | 最大触点电流(直流): | 10 A |
触点(直流)最大额定功率R负载: | 150W@110VDC | 触点(直流)最大额定R负载: | 10A@110VDC |
触点电阻: | 100 mΩ | 最大触点电压(交流): | 250 V |
最大触点电压(直流): | 110 V | 触点/输出电源类型: | AC/DC |
线圈与触点之间的介电强度: | 4000 Vrms | 断开触点之间的介电强度: | 1000 Vrms |
末端触点材料: | Silver Tin Oxide | 输入切换控制类型: | Random |
绝缘电阻: | 1000000000 Ω | 端子数量: | 5 |
工作时间: | 20 ms | 最高工作温度: | 85 °C |
最低工作温度: | -40 °C | PCB 孔数: | 5 |
物理尺寸: | 20mm x 10mm x 16mm | 参考标准: | CSA; TUV; UL; VDE |
继电器动作: | LATCHED | 继电器样式: | 1 FORM C |
继电器功能: | SPDT | 释放时间: | 10 ms |
端子长度: | 0.0042 inch | 端接类型: | SOLDER |
重量: | 7 g | Base Number Matches: | 1 |
JQ1-P-B-48V-F 数据手册
通过下载JQ1-P-B-48V-F数据手册来全面了解它。这个PDF文档包含了所有必要的细节,如产品概述、功能特性、引脚定义、引脚排列图等信息。
PDF下载VDE
1a/1c 5A/10A small power
relays
JQ RELAYS
FEATURES
TYPICAL APPLICATIONS
• High electrical noise immunity
• High switching capacity in a compact
package
• Air conditioners
• Refrigerators
• Microwave ovens
• Heaters
• High sensitivity: 200 mW (1a),
400 mW (1c)
• High surge voltage: 8,000 V between
contacts and coil
• UL, CSA, VDE, SEMKO approved and
TÜV available
• Class B coil insulation type also
available.
• High insulation resistance:
Creepage distance and clearance
between contact and coil:
Min. 4 mm .157 inch
ORDERING INFORMATION
JQ
F
Contact arrangement
1a: 1 Form A
1 : 1 Form C
Contact capacity
Nil: Standard (5A)
P: High capacity (10A)
Coil insulation class
Nil: Class E coil insulation
B: Class B coil insulation (UL)
Nominal coil voltage (DC)
5V, 6V, 9V, 12V, 18V, 24V, 48V*
Contact material
F: AgSnO2 type
Certified by UL, CSA, VDE and SEMKO
Note: *Available only for 1 Form C type
TYPES
1) Standard type
Standard type
High capacity type
1 Form C
Nominal coil voltage
1 Form A
Part No.
1 Form C
Part No.
1 Form A
Part No.
Part No.
5V DC
6V DC
JQ1a-5V-F
JQ1a-6V-F
JQ1a-9V-F
JQ1a-12V-F
JQ1a-18V-F
JQ1a-24V-F
–
JQ1-5V-F
JQ1-6V-F
JQ1-9V-F
JQ1-12V-F
JQ1-18V-F
JQ1-24V-F
JQ1-48V-F
JQ1aP-5V-F
JQ1aP-6V-F
JQ1aP-9V-F
JQ1aP-12V-F
JQ1aP-18V-F
JQ1aP-24V-F
–
JQ1P-5V-F
JQ1P-6V-F
JQ1P-9V-F
JQ1P-12V-F
JQ1P-18V-F
JQ1P-24V-F
JQ1P-48V-F
9V DC
12V DC
18V DC
24V DC
48V DC
Standard packing: Carton 100 pcs., Case 500 pcs.
ds_61B03_en_jq: 201112D
1
JQ
RATING
1. Coil data
Drop-out
voltage
Nominal operating
current
Nominaloperating
power
(at 20C 68F)
Contact
arrangement
Nominal coil
voltage
Pick-up voltage
(at 20C 68F)
Coil resistance
[10%] (at 20C 68F)
Max. applied voltage
(at 20C 68F) [10%] (at 20C 68F)
5V DC
6V DC
40.0mA
33.3mA
125
180
Standard type:
75%V or less of
nominal voltage (Initial) 5%V or more of
nominal voltage
High capacity type:
80%V or less of
nominal voltage (Initial)
180% of nominal voltage
(at 20C 68F)
9V DC
22.2mA
16.7mA
11.1mA
8.3mA
405
1 Form A
200mW
130% of nominal voltage
(at 70C 158F)
[When using relays at
85C 185F, see Notes*4]
12V DC
18V DC
24V DC
5V DC
720
(Initial)
1,620
2,880
80 mA
66.7mA
44.4mA
33.3mA
22.2mA
16.7mA
8.3mA
62.5
90
202.5
Standard type:
75%V or less of
nominal voltage (Initial) 5%V or more of
nominal voltage
High capacity type:
80%V or less of
nominal voltage (Initial)
150% of nominal voltage
6V DC
(at 20C 68F)
9V DC
1 Form C
12V DC
18V DC
24V DC
48V DC
360
810
400mW
110% of nominal voltage
(at 70C 158F)
[When using relays at
85C 185F, see Notes*4]
(Initial)
1,440
5,760
2. Specifications
Specifications
Characteristics
Item
Standard type
High capacity type
Arrangement
Contact resistance (Initial)
Contact material
1 Form A
1 Form C
1 Form A
1 Form C
Contact
Max. 100m (By voltage drop 6 V DC 1 A)
AgSnO2 type
N.O. side:
5 A 125 V AC,
2 A 250 V AC,
10 A 125 V AC,
3 A 30 V AC
5 A 250 V AC,
N.C. side:
2 A 125 V AC,
1 A 250 V AC,
1 A 30 V DC
N.O. side:
10 A 125 V AC,
5 A 250 V AC,
5 A 30 V AC
N.C. side:
3 A 125 V AC,
2 A 250 V AC,
1 A 30 V DC
5 A 125 V AC,
2 A 250 V AC,
5 A 30 V DC
Nominal switching capacity (resistive load)
Max. switching power (resistive load)
5 A 30 V DC
N.O. side:
N.O. side:
1,250 VA, 150 W
N.C. side:
Rating
625 VA, 90 W
1,250 V AC, 150 W
N.C. side:
625 VA, 150 W
250 VA, 30 W
500 V AC, 30 W
Max. switching voltage
250 V AC, 110 V DC (0.3A)
Max. switching current
N.O.: 5 A, N.C.: 2 A
200 mW 400 mW
100 mA, 5 V DC
Min. 1,000 M (at 500 V DC) Measurement at same location as “Breakdown voltage” section.
1,000 Vrms for 1 min. 750 Vrms for 1 min. 1,000 Vrms for 1 min. 750 Vrms for 1 min.
4,000 Vrms for 1 min. (Detection current: 10 mA)
Max. 45C 113F Max. 45C 113F
N.O.: 10 A, N.C.: 3 A
Nominal operating power
Min. switching capacity (reference value)*1
200 mW 400 mW
Insulation resistance (Initial)
Between open contacts
Between contact and coil
Breakdown voltage
(Initial)
(By resistive method, nominal coil voltage
applied to the coil; contact carrying current:
5A, at 70C 158F)
(By resistive method, nominal coil voltage
applied to the coil; contact carrying current:
10A, at 70C 158F)
Temperature rise (coil)
Electrical
characteristics
Surge breakdown voltage*2
(Between contact and coil) (Initial)
8,000 V
Operate time (at nominal voltage) (at 20C 68F)
(Initial)
Max. 20 ms (excluding contact bounce time.)
Release time (at nominal voltage) (at 20C 68F)
(Initial)
Max. 10 ms (excluding contact bounce time) (Without diode)
Functional
Shock resistance
294 m/s2 (Half-wave pulse of sine wave: 11 ms; detection time: 10s.)
980 m/s2 (Half-wave pulse of sine wave: 6 ms.)
10 to 55 Hz at double amplitude of 1.6 mm (Detection time: 10s.)
10 to 55 Hz at double amplitude of 2.0 mm
Min. 107
Destructive
Mechanical
characteristics
Functional
Vibration resistance
Destructive
Expected life
Conditions
Unit weight
Mechanical (at 180 times/min.)
Conditions for operation, transport and storage*3
Max. operating speed
Ambient temperature: –40C to +70C –40F to +158F (class E insulation),
–40C to +85C –40F to +185F*4 (class B insulation)
Humidity: 5 to 85% R.H. (Not freezing and condensing at low temperature)
20 times/min. (at nominal switching capacity)
Approx. 7 g .25 oz
* Specifications will vary with foreign standards certification ratings.
Notes:
*1. This value can change due to the switching frequency, environmental conditions, and desired reliability level, therefore it is recommended to check this with the actual load.
*2. Wave is standard shock voltage of 1.250s according to JEC-212-1981
*3.The upper limit of the ambient temperature is the maximum temperature that can satisfy the coil temperature rise value. Refer to “6. Usage, Storage and Transport
Conditions“ in AMBIENT ENVIRONMENT section in Relay Technical Information.
*4. When using relays in a high ambient temperature, consider the pick-up voltage rise due to the high temperature (a rise of approx. 0.4% V for each 1C 33.8F with 20C
68F as a reference) and use a coil impressed voltage that is within the maximum applied voltage range.
ds_61B03_en_jq: 201112D
2
JQ
3. Expected electrical life
Type
Switching capacity
No. of operations
5 A 125 V AC
3 A 125 V AC
2 A 250 V AC
5 A 30 V DC
5104
2105
2105
105
5104
2105
2105
105
1 Form A
1 Form C
5 A 125 V AC
3 A 125 V AC
2 A 250 V AC
3 A 30 V DC
Standard type
N.O.
N.C.
2 A 125 V AC
1 A 250 V AC
1 A 30 V DC
2105
2105
105
10 A 125 V AC
5 A 250 V AC
5 A 30 V DC
5104
5104
105
5104
5104
105
2105
2105
105
1 Form A
1 Form C
10 A 125 V AC
5 A 250 V AC
5 A 30 V DC
High capacity type
N.O.
N.C.
3 A 125 V AC
2 A 250 V AC
1 A 30 V DC
REFERENCE DATA
1.-(1) Max. switching capacity (1 Form A type)
1.-(2) Max. switching capacity (1 Form C type)
100
100
AC resistive load
(High capacity type) N.O. side
AC resistive load
(Standard type) N.O. side
AC resistive load (High capacity type)
10
5
10
5
3
2
AC resistive load
AC resistive load (Standard type)
1
1
(High capacity type)
N.C. side
AC resistive load
(Standard type)
N.C. side
10
100 250
1,000
10
100 250
1,000
Contact voltage, V
Contact voltage, V
Standard type
2. Life curve
Ambient temperature: room temperature
3.-(1) Operate & release time (1 Form A type)
Tested sample: JQ1a-12V-F, 25 pcs.
3.-(2) Operate & release time (1 Form C type)
Tested sample: JQ1-24V-F, 25 pcs.
100
8
8
125V AC
resistive load
6
6
Operate time
Operate time
10
4
4
250V AC
resistive load
Max.
Max.
Max.
Max.
Min.
Min.
2
2
Min.
Min.
Release time
Release time
0
0
1
80
100
120
150
80
100
120
150
0
1
2
3
4
5
Coil applied voltage, %V
Coil applied voltage, %V
Contact current, A
ds_61B03_en_jq: 201112D
3
JQ
4.-(1) Coil temperature rise (1 Form A type)
4.-(2) Coil temperature rise (1 Form C type)
Contact carrying current: 3 A, 5 A
Measured portion: Inside the coil
Contact carrying current: 3 A, 5 A
Measured portion: Inside the coil
50
70
60
40
5 A at 70°C
5 A at 70°C
50
3 A at 70°C
5 A at 85°C
30
40
5 A at 85°C
30
20
3 A at 70°C
3 A at 85°C
20
3 A at 85°C
10
10
0
0
100 110 120 130 140 150 160 170 180 190
100 110 120 130 140 150 160
Coil applied voltage, %V
Coil applied voltage, %V
5.-(1) Ambient temperature characteristics
(1 Form A type)
5.-(2) Ambient temperature characteristics
(1 Form C type)
Tested sample: JQ1a-24V-F
Tested sample: JQ1-24V-F
Contact carrying current: 3 A, 5 A
Contact carrying current: 3 A, 5 A
1 Allowable ambient temperature against
% coil voltage (max. inside the coil temperature
set as 130C 266F) (Carrying current: 3 A)
2 Allowable ambient temperature against
% coil voltage (max. inside the coil temperature
set as 130C 266F) (Carrying current: 5 A)
400
400
300
300
3 Allowable ambient temperature against
% coil voltage (max. inside the coil temperature
set as 115C 239F) (Carrying current: 3 A)
4 Allowable ambient temperature against
% coil voltage (max. inside the coil temperature
set as 115C 239F) (Carrying current: 5 A)
1
1
2
2
200
200
3
3
4
5
5
6
4
100
100
5 Pick-up voltage with a hot-start condition
of 100%V on the coil (Carrying current: 5 A)
6
7
7
6 Pick-up voltage with a hot-start condition
of 100%V on the coil (Carrying current: 3 A)
0
0
20 30 40 50 60 70 80 90
20 30 40 50 60 70 80 90
7 Pick-up voltage
Ambient temperature, °C
Ambient temperature, °C
High capacity type
1. Life curve
Ambient temperature: room temperature
2.-(1) Operate & release time (1 Form A type)
Tested sample: JQ1aP-12V-F, 25 pcs.
2.-(2) Operate & release time (1 Form C type)
Tested sample: JQ1P-12V-F, 25 pcs.
100
8
6
8
6
4
2
0
Operate time
125V AC resistive load
Operate time
10
4
Max.
Min.
Max.
Min.
Max.
Max.
Min.
Min.
2
0
250V AC resistive load
Release time
120
Release time
120
1
80
100
150
80
100
150
0
2
4
6
8
10
Coil applied voltage, %V
Coil applied voltage, %V
Contact current, A
3.-(1) Coil temperature rise (1 Form A type)
3.-(2) Coil temperature rise (1 Form C type)
Contact carrying current: 5 A, 10 A
Measured portion: Inside the coil
Contact carrying current: 5 A, 10 A
Measured portion: Inside the coil
70
70
10 A at 85°C
60
60
10 A at 85°C
10 A at 70°C
50
50
10 A at 70°C
5 A at 70°C
40
40
5 A at 85°C
30
20
10
0
5 A at 70°C
30
5 A at 85°C
20
10
0
100
120
140
160
180
100 110 120 130 140 150 160
Coil applied voltage, %V
Coil applied voltage, %V
ds_61B03_en_jq: 201112D
4
JQ
4.-(1) Ambient temperature characteristics
(1 Form A type)
4.-(2) Ambient temperature characteristics
(1 Form C type)
Tested sample: JQ1aP-24V-F
Tested sample: JQ1P-24V-F
Contact carrying current: 5 A, 10 A
Contact carrying current: 5 A, 10 A
1 Allowable ambient temperature against
% coil voltage (max. inside the coil temperature
set as 130C 266F) (Carrying current: 5 A)
2 Allowable ambient temperature against
% coil voltage (max. inside the coil temperature
set as 130C 266F) (Carrying current: 10 A)
400
400
300
1
2
300
1
2
3 Allowable ambient temperature against
% coil voltage (max. inside the coil temperature
set as 115C 239F) (Carrying current: 5 A)
4 Allowable ambient temperature against
% coil voltage (max. inside the coil temperature
set as 115C 239F) (Carrying current: 10 A)
200
200
100
3
3
4
5
5
4
100
5 Pick-up voltage with a hot-start condition
of 100%V on the coil (Carrying current: 10 A)
6
7
6
7
6 Pick-up voltage with a hot-start condition
of 100%V on the coil (Carrying current: 5 A)
0
0
20 30 40 50 60 70 80 90
20 30 40 50 60 70 80 90
7 Pick-up voltage
Ambient temperature, °C
Ambient temperature, °C
DIMENSIONS (mm inch)
Download CADData from our Web site.
External dimensions
Schematic (Bottom view)
1 Form A
1 Form A
1 Form C
CAD Data
10
20
COM N.O.
COM N.O.
.394
.787
Coil
Coil
15.6
.614
N.C.
0.4
.016
4.2
.165
7.62
.300
10.16
.400
0.3
7.62
.300
7.62
.300
0.8
0.5 dia.
0.3
.020 dia.
.012
.012
.031
PC board pattern (Bottom view)
1FormC
1 Form C
1 Form A
10
20
.787
5-1.3 dia.
4-1.3 dia.
.394
5-.051 dia.
4-.051 dia.
10.16
.400
7.62
.300
10.16
.400
7.62
.300
15.6
.614
7.62
.300
7.62
.300
0.4
.016
2.54
.100
4.2
5.08
.200
2.54
.100
7.62
.300
10.16
7.62
.300
.165
.400
0.3
Tolerance: 0.1 .004
0.5 dia.
0.3
0.8
.020 dia.
.012
.012
.031
0.3
.012
Dimension:
General tolerance
Less than 1mm .039inch:
0.2 .008
Min. 1mm .039inch less than 5mm .197 inch: 0.3 .012
Min. 5mm .197 inch: 0.4 .016
ds_61B03_en_jq: 201112D
5
JQ
SAFETY STANDARDS
UL/C-UL (Recognized)
Item
CSA (Certified)
VDE (Certified)
Contact rating
TÜV (Certified)
Rating
SEMKO (Certified)
File No. Contact rating File No. Contact rating File No.
File No.
File No. Contact rating
5A 125V AC
5A 277V AC
5A 30V DC
0.3A 110V DC
1/10HP 125V
AC
5A 125V AC
5A 277V AC
5A 30V DC
0.3A 110V DC
1/10HP 125V
AC
5A 250V AC
(cos=0.4)
B 08 09 5A 250V AC
Standard type
(5A) 1 Form A
E43028
LR26550
40011435
817138
817138
817138
817138
3(2)A 125V AC
2(1)A 250V AC
5A 30V DC
13461
252
(cos=0.4)
5A 30V DC (0ms)
1/6HP 277V AC
1/6HP 277V AC
5A 250V AC
5A 125V AC
5A 277V AC
5A 30V DC
0.3A 110V DC
1/10HP 125V
AC
5A 125V AC
5A 277V AC
5A 30V DC
0.3A 110V DC
1/10HP 125V
AC
B 08 09 5A 250V AC
Standard type
(5A) 1 Form C
E43028
LR26550
40011435 (cos=0.4)
3(2)A 125V AC
2(1)A 250V AC
5A 30V DC
13461
252
(cos=0.4)
5A 30V DC (0ms)
(N.O.)
3A 250V AC
(cos=0.4)
(N.C.)
1/6HP 277V AC
1/6HP 277V AC
High capacity
type
(10A) 1 Form A
10A 250V AC
(cos=0.4)
B 08 09 10A 250V AC
E43028 10A 125V AC LR26550 10A 125V AC 40011435
5(3)A 250V AC
5A 30V DC
13461
252
(cos=0.4)
5A 30V DC (0ms)
8A 277V AC
5A 30V DC
0.3A 110V DC
1/6HP 125V AC
1/6HP 277V AC
8A 277V AC
5A 30V DC
0.3A 110V DC
1/6HP 125V AC
1/6HP 277V AC
(N.O.)
High capacity
type
(10A) 1 Form C
B 08 09 10A 250V AC
E43028 10A 125V AC LR26550 10A 125V AC 40011435 10A 250V AC
5(3)A 250V AC
5A 30V DC
13461
252
(cos=0.4)
5A 30V DC (0ms)
8A 277V AC
5A 30V DC
8A 277V AC
5A 30V DC
(cos=0.4)
(N.C.)
0.3A 110V DC
1/6HP 125V AC
1/6HP 277V AC
0.3A 110V DC
1/6HP 125V AC
1/6HP 277V AC
3A 250V AC
(cos=0.4)
NOTES
Note about relay installation orientation
When installing with the relay terminals parallel to the ground, the contact terminals at
the bottom and the coil terminals at the top, component friction will occur after
numerous switching actions or due to vibration in the non-excitation state.
Since this may cause the relay to stop functioning when the pick-up voltage increases
even if the nominal voltage is applied, please do not install using this orientation.
Top
Bottom
For Cautions for Use, see Relay Technical Information.
ds_61B03_en_jq: 201112D
6
JQ1-P-B-48V-F 相关器件
型号 | 制造商 | 描述 | 价格 | 文档 |
JQ1-P-B-5V-F | PANASONIC | Electromechanical Relay, SPDT, Latched, 7.5VDC (Coil), 10A (Contact), 110VDC (Contact), Random, AC/DC Output | 获取价格 | |
JQ1-P-B-6V-F | PANASONIC | Electromechanical Relay, SPDT, Latched, 9VDC (Coil), 10A (Contact), 110VDC (Contact), Random, AC/DC Output | 获取价格 | |
JQ1-P-B-9V-F | PANASONIC | Electromechanical Relay, SPDT, Latched, 13.5VDC (Coil), 10A (Contact), 110VDC (Contact), Random, AC/DC Output | 获取价格 | |
JQ1-XX | NAIS | HIGH ELECTRICAL MECHANICAL NOISE IMMUNITY RELAY | 获取价格 | |
JQ1.25 | BEL | Quick Acting Fuse Series | 获取价格 | |
JQ1.5 | BEL | Quick Acting Fuse Series | 获取价格 | |
JQ100 | BEL | Quick Acting Fuse Series | 获取价格 | |
JQ104E | DBLECTRO | Suitable for automobile and lamp accessories application | 获取价格 | |
JQ104EAS100A | DBLECTRO | Suitable for automobile and lamp accessories application | 获取价格 | |
JQ104EAS100A2D | DBLECTRO | Suitable for automobile and lamp accessories application | 获取价格 |
JQ1-P-B-48V-F 相关文章
- 2024-09-20
- 6
- 2024-09-20
- 9
- 2024-09-20
- 8
- 2024-09-20
- 6