LNP193024 [PANASONIC]
24 X 48 Dot Matrix LED Display;型号: | LNP193024 |
厂家: | PANASONIC |
描述: | 24 X 48 Dot Matrix LED Display 光电 |
文件: | 总3页 (文件大小:428K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Light Emitting Diodes
LNP193024
Pandel Display Units
RG Type
ꢀStructure
Illumination color: Red, Green, Amber (Red and Green lighting)
Display surface: 192 mm × 96 mm
Number of dots (dot): 1152 (48 × 24 dot)
Dot size: 3.2 mm × 2.5 mm, Dome type chip LED
Dot pitch: 4.0 mm
ꢀAbsolute Maximum Ratings T = 25°C
a
Parameter
Operating supply voltage
LED operating supply voltage
Input voltage
Symbol
VCC
Rating
– 0.3 to +5.5
Max. +5.5
nit
V
VLEA
VIN
V
– 0.3 to VCC + 0.3
–1to +45
V
Operating ambient temperature
Storage temperature
Tor
°C
°C
T
stg
–5 to 80
ꢀRecommending Opating Conditions T = 5°C±3°C
a
Parameter
Operating supplvolta
LED opertig suppage
put voltag
l
Min
4.75
4.80
0.00
Typ
5.00
5.00
Max
5.25
5.20
VCC
Unit
V
VLEDA
VIN
V
V
ꢀElectro-Opticteristics T = 25°C, VCC = VLEDA = 5.0 V
a
P
Symbol
Specication
Unit
cd/m2
cd/m2
Red
Typ. 250
Typ. 200
Brightness
Green
Drive system
Duty 1/24 Dynamic lighting
Max. 10
fCLK
Clock frequency
MHz
A
Supply current (Logic) *
Supply current (LED) *
Max. 0.1
ICC(LOGIC)
ICC(LED) Max. 7.0
A
Note) : Two-color all lighting
*
Publication date: July 2008
SHJ00063AEK
1
LNP193024
ꢀPackage (Unit: mm)
ꢀPart name
1. Chip LED
2. Printed board
3. Boss
4. Signal connector (input)
5. Signal connector (output)
6. Supply connector
7. Volume
SHJ00063AEK
2
Request for your special attention and precautions in using the technical information and
semiconductors described in this book
(1) If any of the products or technical information described in this book is to be exported or provided to non-residents, the laws and
regulations of the exporting country, especially, those with regard to security export control, must be observed.
(2) The technical information described in this book is intended only to show the main characteristics and application circuit examples
of the products, and no license is granted under any intellectual property right or other right owned by our company or any other
company. Therefore, no responsibility is assumed by our company as to the infringement upon any such right owned by any other
company which may arise as a result of the use of technical information described in this book.
(3) The products described in this book are intended to be used for standard applications or general electronic equipment (such as office
equipment, communications equipment, measuring instruments and household appliances).
Consult our sales staff in advance for information on the following applications:
– Special applications (such as for airplanes, aerospace, automobiles, traffic contrl equipment, combustion equipment, life support
systems and safety devices) in which exceptional quality and reliability equired, or if the failure or malfunction of the prod-
ucts may directly jeopardize life or harm the human body.
– Any applications other than the standard applications intended.
(4) The products and product specifications described in this book re subjet to change wnotice for modification and/or im-
provement. At the final stage of your design, purchasingouse f the roducts, therfor the most up-to-date Product
Standards in advance to make sure that the latest specifictions saisfy your requirements.
(5) When designing your equipment, comply with the rnge f absolute maximuing nd the guaranteed operating conditions
(operating power supply voltage and operating nvirnt etc.). Especiallyplee be creful not to exceed the range of absolute
maximum rating on the transient state, such as powpower-off and mode-witching. Otherwise, we will not be liable for any
defect which may arise later in your equpment
Even when the products are used withthe guarnteed values, ake nto te cosideration of incidence of break down and failure
mode, possible to occur to semicuctor roducts. Mesures the syems such as redundant design, arresting the spread of fire
or preventing glitch are recomin ordeto prevent pysicainjury, fire, social damages, for example, by using the products.
(6) Comply with the instructionfor ue in rder to prevent reakdown and characteristics change due to external factors (ESD, EOS,
thermal stress and mcanical stress) at the time of handlin, mounting or at customer's process. When using products for which
damp-proof packinis reqred, satisfy the condions, suh as shelf life and the elapsed time since first opening the packages.
(7) This book may e noreprinted or repwhther wholly or partially, without the prior written permission of Matsushita
Electric ndurial Co., Ltd.
相关型号:
©2020 ICPDF网 联系我们和版权申明