ML-614S/FN [PANASONIC]
Secondary Battery, 614S;型号: | ML-614S/FN |
厂家: | PANASONIC |
描述: | Secondary Battery, 614S 电池 |
文件: | 总6页 (文件大小:113K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Manganese Lithium Coin Batteries (ML series): Individual Specifications
ML2020
■ Dimensions(mm)
Weight:2.2g
+0
20.0
0.3
-
+0
( 0.79
)
0.01
-
16( 0.63)
Note: This bare cell diagram is for size reference only. Please refer to the
tab configurations at the end of this section for available tabs.
■ Specification
Nominal voltage (V)
Nominal capacity (mAh)
Continuous standard load (mA)
Operating temperature (C)
3
45
0.12
-20 ~ +60
■ Discharge characteristics
4.0
3.5
3.0
2.5
2.0
1.5
1.0
0.5
0.0
Temp
Load
20k (120 A)
0
10
20
30
40
50
60
Discharge capacity(mAh)
■ Consumption current vs. Duration time
10000
5000
1000
500
100
50
10
1
1
5
10
50
100
500 1000
5000 10000
Consumption Current (µA)
LITHIUM HANDBOOK
AUGUST 2005
This information is generally descriptive only and is not intended to make or imply any representation, guarantee or warranty with respect to any cells and batteries. Cell and battery designs/specifications
are subject to modification without notice. Contact Panasonic for the latest information.
Manganese Lithium Coin Batteries (ML series): Individual Specifications
ML421
Dimensions(mm)
+0
-0.15
4.8
4.0 ± 0.3
0.05
(min)
2.15 +-00.15
Weight 0.11g
Specification
Nominal voltage (V)
Nominal capacity (mAh)
Continuous standard load (mA)
Operating temperature (C)
3
2.3
0.003
-20 ~ +60
Discharge characteristics
4.0
3.5
3.0
Temp: 20˚C
Load: 1MΩ (2.5µA)
2.5
2.0
1.5
1.0
0.5
0.0
0.0
0.5
1.0
1.5
2.0
2.5
3.0
Discharge Capacity (mAh)
Consumption current vs. Duration time
3.0
2.5
2.0
1.5
1.0
Temp: 20˚C
Load: 1MΩ
0.5
Cut off voltage: 2.0V
0.0
2.6
2.7
2.8
2.9
3.0
3.1 3.2 3.3 3.4
Charge Voltage (V)
LITHIUM HANDBOOK
AUGUST 2005
This information is generally descriptive only and is not intended to make or imply any representation, guarantee or warranty with respect to any cells and batteries. Cell and battery designs/specifications are subject to
modification without notice. Contact Panasonic for the latest information.
Manganese Lithium Coin Batteries (ML series): Individual Specifications
ML614
ML621
Dimensions(mm)
Dimensions(mm)
Weight:0.23g
Weight:0.16g
6.8+-00.15
5.2 (max)
0.05
(min)
+0
-0.15
6.8
+0
-0.20
2.15
5.0 ± 0.3
0.05
(min)
1.45 +-00.15
Note: This bare cell diagram is for size reference only. Please refer to the
tab configurations at the end of this section for available tabs.
Specification
Note: This bare cell diagram is for size reference only. Please refer to the
tab configurations at the end of this section for available tabs.
Nominal voltage (V)
Nominal capacity (mAh)
Continuous standard load (mA)
Operating temperature (C)
3
5
Specification
0.01
3
3.4
Nominal voltage (V)
Nominal capacity (mAh)
Continuous standard load (mA)
Operating temperature (C)
-20 ~ +60
Discharge characteristics
0.01
4.0
load: 200k Ω
(12µA)
-20 ~ +60
3.5
20 C
3.0
60 C
Discharge characteristics
2.5
2.0
-20 C
4.0
3.5
3.0
2.5
2.0
1.5
1.0
1.5
1.0
0.5
Temp
Load
300k (8 A)
Charge characteristics : 3.1V, 1kΩ, 45hrs
0.0
0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 6.0 6.5 7.0
Discharge capacity(mAh)
Charge characteristics
4.0
3.5
3.0
2.5
2.0
1.5
1.0
0.5
0.0
1.0
0.9
0.8
0.7
0.6
0.5
0.4
0.3
0.2
0.1
0.0
0.5
Voltage
0
0.5
1.0
1.5
2.0
2.5
3.0
3.5
4.0
Discharge capacity(mAh)
3.1V
ML621S
Consumption current vs. Duration time
Current
0.0
5.0
10.0 15.0 20.0 25.0 30.0 35.0 40.0 45.0 50.0
10000
5000
hour(h)
Consumption current vs. Duration time
1000
500
10000
5000
100
50
1000
500
100
50
10
10
1
1
100
Consumption Current (µA)
1
5
10
50
500 1000
5000 10000
100
Consumption Current (µA)
1
5
10
50
500 1000
5000 10000
LITHIUM HANDBOOK
AUGUST 2005
This information is generally descriptive only and is not intended to make or imply any representation, guarantee or warranty with respect to any cells and batteries. Cell and battery designs/specifications are subject to
modification without notice. Contact Panasonic for the latest information.
Manganese Lithium Coin Batteries (ML series): Individual Specifications
ML920
ML1220
Dimensions(mm)
Dimensions(mm)
Weight:0.4g
Weight:0.8g
+0
12.5
-0.3
9.5+-00.15
5.0
+0
-0.01
( 0.49
)
9( 0.35)
0.05
+0
-0.2
2.05
Note: This bare cell diagram is for size reference only. Please refer to the
tab configurations at the end of this section for available tabs.
Specification
Note: This bare cell diagram is for size reference only. Please refer to the
3
Nominal voltage (V)
tab configurations at the end of this section for available tabs.
11.0
0.03
Nominal capacity (mAh)
Continuous standard load (mA)
Operating temperature (C)
Specification
3
17.0
Nominal voltage (V)
Nominal capacity (mAh)
Continuous standard load (mA)
Operating temperature (C)
-20 ~ +60
Discharge characteristics
0.03
4.0
3.5
3.0
2.5
2.0
1.5
1.0
0.5
0.0
-20 ~ +60
Temp
Load
75k (32 A)
Discharge characteristics
4.0
3.5
3.0
2.5
2.0
1.5
1.0
0.5
0.0
Temp
Load
100k (24 A)
0
2
4
6
8
10
12
14
Discharge capacity(mAh)
Consumption current vs. Duration time
0
2
4
6
8
10 12 14 16
18 20
Discharge capacity(mAh)
10000
5000
Consumption current vs. Duration time
1000
500
10000
5000
100
50
1000
500
10
100
50
1
1
5
10
50
100
500 1000
5000 10000
Consumption Current (µA)
10
1
1
5
10
50
100
500 1000
5000 10000
Consumption Current (µA)
LITHIUM HANDBOOK
AUGUST 2005
This information is generally descriptive only and is not intended to make or imply any representation, guarantee or warranty with respect to any cells and batteries. Cell and battery designs/specifications are subject to
modification without notice. Contact Panasonic for the latest information.
Product Information Sheet
Panasonic Batteries
Product: Manganese Lithium (ML
Type) Lithium Batteries
Applicable models/sizes: All ML type
Panasonic Industrial Company
A Division Panasonic Corporation of North America
5201 Tollview Drive, 1F-3
Rolling Meadows, IL 60008
877-726-2228
847-637-4660
Toll Free:
Fax:
Revision: January 1, 2014
Internet: www.panasonic.com/industrial/batteries.oem
e-mail: oembatteries@panasonic.com
The batteries referenced herein are exempt articles and are not subject to the OSHA Hazard
Communication Standard requirement. This sheet is provided as a service to our customers.
MSDS
Material Safety Data Sheets (MSDS) are a sub-requirement of the Occupational Safety and Health Administration
(OSHA) Hazard Communication Standard, 29 CFR Subpart 1910.1200. This Hazard Communication Standard does
not apply to various subcategories including anything defined by OSHA as an "article". OSHA has defined "article" as a
manufactured item other than a fluid or particle; (i) which is formed to a specific shape or design during manufacture; (ii)
which has end use function(s) dependent in whole or in part upon its shape or design during end use; and (iii) which
under normal conditions of use does not release more than very small quantities, e.g. minute or trace amounts of a
hazardous chemical, and does not pose a physical hazard or health risk to employees.
Because all of our batteries are defined as "articles", they are exempt from the requirements of the Hazard
Communication Standard; hence a MSDS is not required.
DISPOSAL
These batteries contain so little lithium that they are never defined by the federal government as a reactive hazardous
waste and are safe for disposal in the normal municipal waste stream..
TRANSPORTATION
All Panasonic lithium batteries are not subject to the requirements of the Department of Transportation (DOT)
Subchapter C, Hazardous Materials Regulations if shipped in compliance with 49 CFR 173.185 and Special
Provision 188.
Effective January 1, 2014 all Panasonic lithium batteries can be shipped by air in accordance with International Civil
Aviation Organization (ICAO), 2013-2014 edition, Section II or Section 1B, International Air Transport Association
(IATA) 55th edition, Section II or Section 1B Packing Instructions (PI) 968 (Batteries), PI 969 (Batteries, packed with
equipment) and PI 970 (Batteries, contained in equipment) as appropriate
All Panasonic lithium batteries are regulated by the International Maritime Organization (IMO), 2012 edition, 36th
amendment, under Special Provisions 188 and 230.
All Panasonic lithium cells are tested and comply with the UN Model Regulations, Manual of Test and Criteria, Part
III, subsection 38.3.
If you build any of our lithium cells into a battery pack, you must also assure that they are tested in accordance with
the UN Model Regulations, Manual of Test and Criteria. Part III, subsection 38.3, 5th revised edition, Amendment 1.
The DOT requires that the outside of each package that contains lithium metal batteries, regardless of size or
number of batteries, be labeled with the following statement: “LITHIUM METAL BATTERIES- FORBIDDEN FOR
TRANSPORT ABOARD PASSENGER AIRCRAFT”. The labeling requirement covers shipments via highway, rail,
vessel or cargo-only aircraft and covers all shipments inside, into or out of the US. The label must be in contrasting
color and the letters must be 12 mm (0.5 in) in height for packages weighing more than 30 Kg and 6 mm (0.25 in) in
height for packages weighting less than 30 Kg.
Notice: The information and recommendations set forth are made in good faith and are believed to be accurate at the date of preparation.
Panasonic Industrial Company makes no warranty expressed or implied.
053-13
Page 1 of 2
First Aid
If you get electrolyte in your eyes, flush with water for 15 minutes without rubbing and immediately contact a
physician. If you get electrolyte on your skin wash the area immediately with soap and water. If irritation continues,
contact a physician. If a battery is ingested, call the National Capital Poison Center (NCPC) at 202-625-3333
(Collect) or your local poison center immediately. Lithium coin batteries lodged in the esophagus should be
removed immediately. Leakage, chemical burns and perforation can occur within hours of ingestion.
General Recommendations
CAUTION: Risk of fire, explosion and burns. Do not recharge, crush, heat above 212OF (100OC) or incinerate.
Fire Safety
In case of fire, you can use a Class “D” fire extinguisher or other smothering agent such as Lith-X, copper powder or dry
sand. If you use water, use enough to smother the fire. Using an insufficient amount of water will only make the fire
worse. Cooling the exterior of the batteries will help prevent rupturing. Burning of these batteries will generate toxic
and corrosive lithium hydroxide fumes. Fire fighters should use self-contained breathing apparatus. Detailed
information on fighting a lithium metal battery fire can be found in Guide 138 (Substances – Water – Reactive) of the
US DOT Emergency Response Guide.
Notice: The information and recommendations set forth are made in good faith and are believed to be accurate at the date of preparation.
Panasonic Industrial Company makes no warranty expressed or implied.
053-13
Page 2 of 2
相关型号:
©2020 ICPDF网 联系我们和版权申明