MN101C66D(84QFP) [PANASONIC]
Microcontroller, 8-Bit, MROM, MN101C00 CPU, 20MHz, CMOS, PQFP84;型号: | MN101C66D(84QFP) |
厂家: | PANASONIC |
描述: | Microcontroller, 8-Bit, MROM, MN101C00 CPU, 20MHz, CMOS, PQFP84 微控制器 |
文件: | 总5页 (文件大小:452K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
ROM (×8-bit)
MN101C66D,MN101C66G
MN101C66D
MN101C66G (under development)
Type
64 K
128 K
4 K
2 K
RAM (×8-bit)
QFP084-P-1818E *Lead-free, LQFP080-P-1414A *Lead-free, TQFP080-P-1212D *Lead-free (under plannning)
Package
Minimum Instruction
Execution Time
0.1 µs (at 4.5 V to 5.5 V, 20 MHz)
0.25 µs (at 2.7 V to 5.5 V, 8 MHz)
62.5 µs (at 2.0 V to 5.5 V, 32 kHz)*1
1
*
The lower limit for operation guarantee for flash memory built-in type is 2.5 V.
The lower limit for operation guarantee for EPROM built-in type is 2.3 V.
• RESET • Watchdog • External 0 • External 1 • External 2 • External 3*1
Interrupts
• External 4 (key interrupt dedicated) • Timer 0 • Timer 1 • Timer 2 • Timer 3 • Timer 6 • Time base
• Timer 7 (2 systems) • Timer 8 (2 systems) • Serial 0 (2 systems) • Serial 2 • A/D conversion finish
1
*
LQFP080-P-1414A,TQFP080-P-1212D: Not mounted
Timer counter 0 : 8-bit × 1
Timer Counter
(square-wave/8-bit PWM output, event count, generation of remote control carrier, simple pulse width
measurement) (square-wave/PWM output to large current terminal P50 possible)
Clock source ····················· 1/2, 1/4 of system clock frequency; 1/1, 1/4, 1/16, 1/32, 1/64 of OSC oscillation
clock frequency; 1/1 of XI oscillation clock frequency; external clock input
Interrupt source ················ coincidence with compare register 0
Timer counter 1 : 8-bit × 1 (square-wave output, event count, synchronous output event)
Clock source ····················· 1/2, 1/8 of system clock frequency; 1/1, 1/4, 1/16, 1/8192, 1/32768 of OSC
oscillation clock frequency; 1/1 of XI oscillation clock frequency; external
clock input
Interrupt source ················ coincidence with compare register 1
Timer counter 0, 1 can be cascade-connected.
Timer counter 2 : 8-bit × 1
(square-wave output, additional pulse type 10-bit PWM output, event count, synchronous output event,
simple pulse width measurement) (square-wave/PWM output to large current terminal P52 possible)
Clock source ····················· 1/2, 1/4 of system clock frequency; 1/1, 1/4, 1/16, 1/32, 1/64 of OSC oscillation
clock frequency; 1/1 of XI oscillation clock frequency; external clock input
Interrupt source ················ coincidence with compare register 2
Timer counter 3 : 8-bit × 1
(square-wave output, event count, generation of remote control carrier, serial 0 baud rate timer)
Clock source ····················· 1/2, 1/8 of system clock frequency; 1/1, 1/4, 1/16, 1/64, 1/128 of OSC
oscillation clock frequency; 1/1 of XI oscillation clock frequency; external
clock input
Interrupt source ················ coincidence with compare register 3
Timer counter 2, 3 can be cascade-connected.
Timer counter 6 : 8-bit freerun timer
Clock source ····················· 1/1 of system clock frequency; 1/1, 1/4096, 1/8192 of OSC oscillation clock
frequency; 1/1, 1/4096, 1/8192 of XI oscillation clock frequency
Interrupt source ················ coincidence with compare register 6
Timer counter 7 : 16-bit × 1
(square-wave output, IGBT/16-bit PWM output (cycle / duty continuous variable), event count, synchronous
output evevt, pulse width measurement, input capture) (square-wave/PWM output to large current terminal P51
possible)
Clock source ····················· 1/1, 1/2, 1/4, 1/16 of system clock frequency; 1/1, 1/2, 1/4, 1/16 of OSC
oscillation clock frequency; 1/1, 1/2, 1/4, 1/16 of external clock input frequency
Interrupt source ················ coincidence with compare register 7 (2 lines)
MAD00017EEM
1
MN101C66D, MN101C66G
Timer counter 8: 16 bit × 1
Timer Counter (Continue)
(square-wave/16-bit PWM output [duty continuous variable], event count, pulse width measurement,
inputcapture)
(square-wave/PWM output to large current terminal P53 possible)
Clock source ····················· 1/1, 1/2, 1/4, 1/16, 1/128 of system clock frequency;
1/1, 1/2, 1/4, 1/16, 1/128 of OSC oscillation clock frequency;
1/1, 1/2, 1/4, 1/16 of external clock input frequency
Interrupt source ················ coincidence with compare register 8 (2 lines)
Timer counters 7, 8 can be cascade-connected.
(square-wave output, PWM, input capture, pulse width measurement is possible as a 32-bit timer.)
Time base timer (one-minute count setting)
Clock source ····················· 1/1 of OSC oscillation clock frequency; 1/1 of XI oscillation clock frequency
Interrupt source ················ 1/128, 1/256, 1/512, 1/1024, 1/8192, 1/32768 of clock source frequency
Watchdog timer
Interrupt source ················ 1/65536, 1/262144, 1/1048576 of system clock frequency
Serial 0 : synchronous type/UART (full-duplex) × 1
Serial Interface
Clock source ····················· 1/2, 1/4 of system clock frequency; pulse output of timer counter 3;
1/2, 1/4, 1/16, 1/64 of OSC oscillation clock frequency
Serial 2 : synchronous type × 1
Clock source ····················· 1/2, 1/4 of system clock frequency; pulse output of timer counter 3;
1/2, 1/4, 1/16, 1/32 of OSC oscillation clock frequency
61
• Common use • Specified pull-up resistor available • Input/output selectable (bit unit)
( ): LQFP080-P-1414A,TQFP080-P-1212D
I/O Pins
I/O
(60)
4
• Common use • Specified pull-up resistor available
Input
(3)
( ): LQFP080-P-1414A,TQFP080-P-1212D
10-bit × 8-ch. (with S/H)
A/D Inputs
LCD
32 segments × 4 commons (static, 1/2, 1/3, or 1/4 duty)
LCD power supply separated from VDD (usable if VLCD ≤VDD)
LCD power shunt resistance contained
Buzzer output, remote control carrier signal output, high-current drive port
Special Ports
Electrical Characteristics
Supply current
Limit
typ
25
Parameter
Symbol
Condition
Unit
min
max
60
25
100
8
IDD1
IDD2
IDD3
IDD4
IDD5
IDD6
IDD7
fosc = 20 MHz, VDD = 5 V
fosc = 8 MHz, VDD = 5 V
mA
mA
µA
µA
µA
µA
µA
10
Operatingsupplycurrent
fx = 32 kHz, VDD = 3 V
30
fx = 32 kHz, VDD = 3 V, Ta = 25°C
fx = 32 kHz, VDD = 3 V, Ta = −40°C to +85°C
VDD = 5 V, Ta = 25°C
4
Supply current at HALT
Supply current at STOP
30
2
VDD = 5 V, Ta = −40°C to +85°C
50
See the next page for pin assignment and support tool.
MAD00017EEM
2
Pin Assignment
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
42
41
40
39
38
37
36
35
34
33
32
31
30
29
28
27
26
25
24
23
22
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
P70/SEG15
P71/SEG14
P72/SEG13
P73/SEG12
P74/SEG11
P75/SEG10
P76/SEG9
P77/SEG8
P80/SEG7
P81/SEG6
P82/SEG5
P83/SEG4
P84/SEG3
P85/SEG2
P86/SEG1
P87/SEG0
NC
TM8IO/P15
TM7IO/P14
TM3IO/P13
TM2IO/P12
TM1IO/P11
RMOUT/TM0IO/P10
BUZZER/P06
SBT2/P05
P70/SEG15
P71/SEG14
P72/SEG13
P73/SEG12
P74/SEG11
P75/SEG10
P76/SEG9
P77/SEG8
P80/SEG7
P81/SEG6
P82/SEG5
P83/SEG4
P84/SEG3
P85/SEG2
P86/SEG1
P87/SEG0
COM0/P30
COM1/P31
COM2/P32
COM3/P33
40
39
38
37
36
35
34
33
32
31
30
29
28
27
26
25
24
23
22
21
TM8IO/P15
TM7IO/P14
TM3IO/P13
TM2IO/P12
TM1IO/P11
RMOUT/TM0IO/P10
BUZZER/P06
SBT2/P05
SBI2/P04
SBI2/P04
SBO2/P03
SBT0/P02
MN101C66D
MN101C66G
SBO2/P03
SBT0/P02
MN101C66D
MN101C66G
RXD/SBI0/P01
TXD/SBO0/P00
VDD
RXD/SBI0/P01
TXD/SBO0/P00
VDD
VREF-
VREF-
AN7/PA7
AN7/PA7
AN6/PA6
AN6/PA6
COM0/P30
COM1/P31
COM2/P32
COM3/P33
AN5/PA5
AN5/PA5
AN4/PA4
AN4/PA4
AN3/PA3
AN3/PA3
AN2/PA2
LQFP080-P-1414A *Lead-free
TQFP080-P-1212D*Lead-free (under plannnig)
QFP084-P-1818E *Lead-free
Support Tool
PX-ICE101C / D + PX-PRB101C66-QFP084-P-1818E-M
PX-ICE101C / D + PX-PRB101C66-LQFP080-P-1414A-M
In-circuit Emulator
EPROM Built-in Type
Type
MN101CP66D
ROM (× 8-bit)
64 K
RAM (× 8-bit)
2 K
Minimum instruction execution time
0.1 µs (at 4.5 V to 5.5 V, 20 MHz)
0.25 µs (at 2.7 V to 5.5 V, 8 MHz)
62.5 µs (at 2.3 V to 5.5 V, 32 kHz)
Package
LQFP080-P-1414A *Lead-free, QFP084-P-1818E *Lead-free
TQFP080-P-1212D *Lead-free (under planning)
MN101CF66G [ES (Engineering Sample) available]
128 K
,
Flash Memory Built-in Type
Type
ROM (× 8-bit)
RAM (× 8-bit)
4 K
Minimum instruction execution time
0.1 µs (at 4.5 V to 5.5 V, 20 MHz)
0.25 µs (at 2.7 V to 5.5 V, 8 MHz)
62.5 µs (at 2.5 V to 5.5 V, 32 kHz)
Package
LQFP080-P-1414A *Lead-free, QFP084-P-1818E *Lead-free
,
*Lead-free
TQFP080-P-1212D
(under planning)
MAD00017EEM
3
MN101C66D, MN101C66G
MAD00017EEM
4
Request for your special attention and precautions in using the technical
information and semiconductors described in this book
(1) An export permit needs to be obtained from the competent authorities of the
Japanese Government if any of the products or technologies described in this book
and controlled under the "Foreign Exchange and Foreign Trade Law" is to be export-
ed or taken out of Japan.
(2) The technical information described in this book is limited to showing representative
characteristics and applied circuits examples of the products. It neither warrants
non-infringement of intellectual property right or any other rights owned by our com-
pany or a third party, nor grants any license.
(3) We are not liable for the infringement of rights owned by a third party arising out of
the use of the product or technologies as described in this book.
(4) The products described in this book are intended to be used for standard applica-
tions or general electronic equipment (such as office equipment, communications
equipment, measuring instruments and household appliances).
Consult our sales staff in advance for information on the following applications:
• Special applications (such as for airplanes, aerospace, automobiles, traffic control
equipment, combustion equipment, life support systems and safety devices) in
which exceptional quality and reliability are required, or if the failure or malfunction
of the products may directly jeopardize life or harm the human body.
• Any applications other than the standard applications intended.
(5) The products and product specifications described in this book are subject to
change without notice for modification and/or improvement. At the final stage of your
design, purchasing, or use of the products, therefore, ask for the most up-to-date
Product Standards in advance to make sure that the latest specifications satisfy your
requirements.
(6) When designing your equipment, comply with the guaranteed values, in particular
those of maximum rating, the range of operating power supply voltage, and heat
radiation characteristics. Otherwise, we will not be liable for any defect which may
arise later in your equipment.
Even when the products are used within the guaranteed values, take into the con-
sideration of incidence of break down and failure mode, possible to occur to semi-
conductor products. Measures on the systems such as redundant design, arresting
the spread of fire or preventing glitch are recommended in order to prevent physical
injury, fire, social damages, for example, by using the products.
(7) When using products for which moisture-proof packaging is required, observe the
conditions (including shelf life and amount of time let standing of unsealed items)
agreed upon when specification sheets are individually exchanged.
(8) This book may be not reprinted or reproduced whether wholly or partially, without
the prior written permission of Matsushita Electric Industrial Co., Ltd.
If you have any inquiries or questions about this book or our semiconductor prod-
ucts, please contact one of our sales offices listed on the back or semiconductor
company’s sales department.
Windows is a registered trademark of Microsoft Corporation.
MS-DOS is a registered trademark of Microsoft Corporation.
Sun and Solaris are registered trademarks of Sun Microsystems, Inc.
PC-9801 is a registered trademark of NEC.
PC/AT is a registered trademark of International Business Machines Corporation.
TRON is an abbreviation of “The Real-time Operating system Nucleus.”
ITRON is an abbreviation of “Industrial TRON.”
µ ITRON is an abbreviation of “Micro Industrial TRON.”
TRON, ITRON, and µ ITRON do not refer to any specific product or products.
Other company names and product names are registered trademarks.
相关型号:
©2020 ICPDF网 联系我们和版权申明