MN101C78A(44QFP) [PANASONIC]
Microcontroller, 8-Bit, MROM, MN101C00 CPU, 10MHz, CMOS, PQFP44,;
| 型号： | MN101C78A(44QFP) |
| 厂家： | 
PANASONIC |
| 描述： | Microcontroller, 8-Bit, MROM, MN101C00 CPU, 10MHz, CMOS, PQFP44, 微控制器 |
| 文件： | 总5页 (文件大小：452K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
MN101C78A
MN101C78A (under development)
Type
ROM (
32 K
×8-bit)
1.5 K
RAM (×8-bit)
TQFP048-P-0707B *Lead-free (under development), QFP044-P-1010F *Lead-free (under planning)
Package
Minimum Instruction
Execution Time
0.1 µs (at 3.0 V to 3.6 V, 10 MHz)
0.235 µs (at 1.8 V to 3.6 V, 4.25 MHz)
62.5 µs (at 1.8 V to 3.6 V, 32 kHz)
• RESET • Watchdog • External 0 • External 1 • External 2 • External 4 (key interrupt dedicated) • Timer 0
• Timer 1 • Timer 2 • Timer 3 • Timer 6 • Time base • Timer 7 (2 systems) • Timer 8 (2 systems)
• Serial 0 (2 systems) • Serial 1 (2 systems) • Serial 3, Serial 4 • A/D conversion finish
Interrupts
Timer counter 0 : 8-bit × 1
Timer Counter
(square-wave/8-bit PWM output, event count, generation of remote control carrier, simple pulse width
measurement, added pluse (2-bit) system PWM output, real time output control) (square-wave/PWM output to
large current terminal P50 possible)
Clock source ····················· 1/2, 1/4 of system clock frequency; 1/1, 1/4, 1/16, 1/32, 1/64 of OSC oscillation
clock frequency; 1/1 of XI oscillation clock frequency; external clock input
Interrupt source ················ coincidence with compare register 0
Timer counter 1 : 8-bit × 1 (square-wave output, event count, synchronous output event)
Clock source ····················· 1/2, 1/8 of system clock frequency; 1/1, 1/4, 1/16, 1/64, 1/128 of OSC
oscillation clock frequency; 1/1 of XI oscillation clock frequency; external
clock input
Interrupt source ················ coincidence with compare register 1
Timer counter 0, 1 can be cascade-connected.
Timer counter 2 : 8-bit × 1
(square-wave output, added pluse (2-bit) system PWM output, PWM output, serial transfer clock output, real
time output control, event count, synchronous output event, simple pulse width measurement) (square-wave/
PWM output to large current terminal P52 possible)
Clock source ····················· 1/2, 1/4 of system clock frequency; 1/1, 1/4, 1/16, 1/32, 1/64 of OSC oscillation
clock frequency; 1/1 of XI oscillation clock frequency; external clock input
Interrupt source ················ coincidence with compare register 2
Timer counter 3 : 8-bit × 1
(square-wave output, event count, generation of remote control carrier, serial transfer clock)
Clock source ····················· 1/2, 1/8 of system clock frequency; 1/1, 1/4, 1/16, 1/64, 1/128 of OSC
oscillation clock frequency; 1/1 of XI oscillation clock frequency; external
clock input
Interrupt source ················ coincidence with compare register 3
Timer counter 2, 3 can be cascade-connected.
Timer counter 6 : 8-bit freerun timer
Clock source ····················· 1/1 of system clock frequency; 1/1, 1/128, 1/8192 of OSC oscillation clock
frequency; 1/1, 1/128, 1/8192 of XI oscillation clock frequency
Interrupt source ················ coincidence with compare register 6
Timer counter 7 : 16-bit × 1
(square-wave output, 16-bit PWM output (cycle / duty continuous variable), event count, synchronous output
event, pulse width measurement, input capture, real time output control, high performance IGBT output)
(square-wave/PWM output to large current terminal P51 possible)
Clock source ····················· 1/1, 1/2, 1/4, 1/16 of system clock frequency; 1/1, 1/2, 1/4, 1/16 of OSC
oscillation clock frequency; 1/1, 1/2, 1/4, 1/16 of external clock input frequency
Interrupt source ················ coincidence with compare register 7 (2 lines), input capture register
MAD00039AEM
1
MN101C78A
Timer counter 8: 16 bit × 1
Timer Counter
(Continue)
(square-wave/16-bit PWM output [duty continuous variable], event count, pulse width measurement, input capture)
(square-wave/PWM output to large current terminal P53 possible)
Clock source ····················· 1/1, 1/2, 1/4, 1/16 of system clock frequency;
1/1, 1/2, 1/4, 1/16 of OSC oscillation clock frequency;
1/1, 1/2, 1/4, 1/16 of external clock input frequency
Interrupt source ················ coincidence with compare register 8 (2 lines), input capture register
Timer counters 7, 8 can be cascade-connected.
(square-wave output, PWM input capture, pluse width measurement is possible as a 32-bit timer.)
Time base timer (one-minute count setting)
Clock source ····················· 1/1 of OSC oscillation clock frequency; 1/1 of XI oscillation clock frequency
Interrupt source ················ 1/128, 1/256, 1/512, 1/1024, 1/8192, 1/32768, of clock source frequency
Watchdog timer
Interrupt source ················ 1/65536, 1/262144, 1/1048576 of system clock frequency
Serial 0 : synchronous type/UART (full-duplex) × 1
Serial Interface
Clock source ····················· 1/2, 1/4 of system clock frequency; pulse output of timer counter 1 or 2;
1/2, 1/4, 1/16, 1/64 of OSC oscillation clock frequency, external clock
Serial 1 : synchronous type/UART (full-duplex) × 1
Clock source ····················· 1/2, 1/4 of system clock frequency; pulse output of timer counter 1 or 2;
1/2, 1/4, 1/16, 1/64 of OSC oscillation clock frequency, external clock
Serial 3 : synchronous type/single-master I2C × 1
Clock source ····················· 1/2, 1/4 of system clock frequency; pulse output of timer counter 2 or 3;
1/2, 1/4, 1/16, 1/32 of OSC oscillation clock frequency, external clock
Serial 4 : I2C slave × 1
Applicable for I2C high-speed transfer mode, 7bit/10bit address setting, general call
40
• Common use • Specified pull-up resistor available • Input/output selectable (bit unit)
I/O Pins
I/O
(35)
(
): QFP044-P-1010F
10-bit × 8-ch. (with S/H)
A/D Inputs
LCD
12 segments × 4 commons (static, 1/2, 1/3, or 1/4 duty)
(usable if VLCD ≤ VDD)
Buzzer output, remote control carrier signal output, high-current drive port
Special Ports
Electrical Characteristics
Supply current
Limit
Parameter
Symbol
Condition
Unit
min
typ
1
max
2
IDD1
IDD2
IDD3
IDD4
IDD5
IDD6
fosc = 4 MHz, VDD = 3 V
fx = 32 kHz, VDD = 3 V
mA
µ A
µ A
µ A
µ A
µ A
Operatingsupplycurrent
SupplycurrentatHALT
SupplycurrentatSTOP
4
15
10
40
2
fx = 32 kHz, VDD = 3 V, Ta = 25°C
fx = 32 kHz, VDD = 3 V, Ta = −40°C to +85°C
VDD = 3 V, Ta = 25°C
2
VDD = 3 V, Ta = −40°C to +85°C
30
See the next page for pin assignment and support tool.
MAD00039AEM
2
Pin Assignment
TM0OA/LED0/P50
TM7O/LED1/P51
TM2OA/LED2/P52
TM8O/LED3/P53
1
2
36
35
34
33
32
31
30
29
28
27
26
25
SEG4/P73/KEY3
TM0OA/LED0/P50
TM7O/LED1/P51
TM2OA/LED2/P52
TM8O/LED3/P53
1
2
33
32
31
30
29
28
27
26
25
24
23
SEG4/P73/KEY3
SEG5/P72/KEY2
SEG5/P72/KEY2
3
SEG6/P71/KEY1/TM3IO
SEG7/P70/KEY0/TM1IO
SEG8/P17/SBT1A/TM2OB
SEG9/P16/TM2IO/RXD1A/SBI1A
SEG10/P15/TM0OB/TXD1A/SBO1A
SEG11/P14/TM0IO/RMOUT
NBUZZER/P13/TM7IO/CLKOUT
BUZZER/P12/TM8IO
3
SEG6/P71/KEY1/TM3IO
SEG7/P70/KEY0/TM1IO
SEG8/P17/SBT1A/TM2OB
SEG9/P16/TM2IO/RXD1A/SBI1A
SEG10/P15/TM0OB/TXD1A/SBO1A
SEG11/P14/TM0IO/RMOUT
NBUZZER/P13/TM7IO/CLKOUT
BUZZER/P12/TM8IO
4
4
VSS
5
VSS
5
OSC2
OSC1
6
OSC2
OSC1
6
MN101C78A
MN101C78A
7
7
VDD
8
VDD
8
XI/P90
XO
9
XI/P90
XO
9
10
11
12
10
11
MMOD
NRST, P27
P56/IRQ2
MMOD
P56/IRQ2
P55/IRQ1/ACZ1
TQFP048-P-0707B *Lead-free (under development)
QFP044-P-1010F *Lead-free (under planning)
Support Tool
PX-ICE101C / D + PX-PRB101C78-TQFP048-P-0707B-M (under development)
PX-ICE101C / D + PX-PRB101C78-QFP044-P-1010F-M (under planning)
In-circuit Emulator
Flash Memory Built-in Type
Type
MN101CF78A (under development)
32 K
ROM (× 8-bit)
RAM (× 8-bit)
1.5 K
Minimum instruction execution time
0.1 µs (at 3.0 V to 3.6 V, 10 MHz)
0.235 µs (at 2.7 V to 3.6 V, 4 MHz)
62.5 µs (at 2.7 V to 3.6 V, 32 kHz)
*Lead-free
Package
TQFP048-P-0707B
(under development)
MAD00039AEM
3
MN101C78A
MAD00039AEM
4
Request for your special attention and precautions in using the technical
information and semiconductors described in this book
(1) An export permit needs to be obtained from the competent authorities of the
Japanese Government if any of the products or technologies described in this book
and controlled under the "Foreign Exchange and Foreign Trade Law" is to be export-
ed or taken out of Japan.
(2) The technical information described in this book is limited to showing representative
characteristics and applied circuits examples of the products. It neither warrants
non-infringement of intellectual property right or any other rights owned by our com-
pany or a third party, nor grants any license.
(3) We are not liable for the infringement of rights owned by a third party arising out of
the use of the product or technologies as described in this book.
(4) The products described in this book are intended to be used for standard applica-
tions or general electronic equipment (such as office equipment, communications
equipment, measuring instruments and household appliances).
Consult our sales staff in advance for information on the following applications:
• Special applications (such as for airplanes, aerospace, automobiles, traffic control
equipment, combustion equipment, life support systems and safety devices) in
which exceptional quality and reliability are required, or if the failure or malfunction
of the products may directly jeopardize life or harm the human body.
• Any applications other than the standard applications intended.
(5) The products and product specifications described in this book are subject to
change without notice for modification and/or improvement. At the final stage of your
design, purchasing, or use of the products, therefore, ask for the most up-to-date
Product Standards in advance to make sure that the latest specifications satisfy your
requirements.
(6) When designing your equipment, comply with the guaranteed values, in particular
those of maximum rating, the range of operating power supply voltage, and heat
radiation characteristics. Otherwise, we will not be liable for any defect which may
arise later in your equipment.
Even when the products are used within the guaranteed values, take into the con-
sideration of incidence of break down and failure mode, possible to occur to semi-
conductor products. Measures on the systems such as redundant design, arresting
the spread of fire or preventing glitch are recommended in order to prevent physical
injury, fire, social damages, for example, by using the products.
(7) When using products for which moisture-proof packaging is required, observe the
conditions (including shelf life and amount of time let standing of unsealed items)
agreed upon when specification sheets are individually exchanged.
(8) This book may be not reprinted or reproduced whether wholly or partially, without
the prior written permission of Matsushita Electric Industrial Co., Ltd.
If you have any inquiries or questions about this book or our semiconductor prod-
ucts, please contact one of our sales offices listed on the back or semiconductor
company’s sales department.
Windows is a registered trademark of Microsoft Corporation.
MS-DOS is a registered trademark of Microsoft Corporation.
Sun and Solaris are registered trademarks of Sun Microsystems, Inc.
PC-9801 is a registered trademark of NEC.
PC/AT is a registered trademark of International Business Machines Corporation.
TRON is an abbreviation of “The Real-time Operating system Nucleus.”
ITRON is an abbreviation of “Industrial TRON.”
µ ITRON is an abbreviation of “Micro Industrial TRON.”
TRON, ITRON, and µ ITRON do not refer to any specific product or products.
Other company names and product names are registered trademarks.
相关型号：
MN101C79A
Microcontroller, 8-Bit, MROM, MN101C00 CPU, 10MHz, CMOS, PQCC44, 6 X 6 MM, LEAD FREE, PLASTIC, QFN-44
PANASONIC
©2020 ICPDF网 联系我们和版权申明