MN101CF97D(48TQFP) [PANASONIC]
Microcontroller, 8-Bit, FLASH, MN101C00 CPU, 8MHz, PQFP48,;
| 型号： | MN101CF97D(48TQFP) |
| 厂家： | 
PANASONIC |
| 描述： | Microcontroller, 8-Bit, FLASH, MN101C00 CPU, 8MHz, PQFP48, 微控制器 |
| 文件： | 总8页 (文件大小：417K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
MN101C97 Sriese
8-bit Single-chip Microcontroller
Overview
The MN101C series of 8-bit single-chip microcomputers incorporate multiple types of peripheral functions.
This chip series is well suited for camera, VCR, MD, TV, CD, LD, printer, telephone, home automation, pager, air conditioner, PPC, remote
control, fax machine, music instrument and other applications.
This LSI brings to embedded microcomputer applications flexible, optimized hardware configurations and a simple efficient instruction
set. The MN101C97D has an internal 64 KB of ROM and 1 KB of RAM. Peripheral functions include 7 external interrupts, 13 internal
interrupts including NMI, 8 timer counters, 2 sets of serial interfaces, A/D converter, watchdog timer, buzzer output, and remote control
output. The configuration of this microcomputer is well suited for application as a system controller in a camera, timer selector for VCR, CD
player, or MD.
With two oscillation system (max. 8 MHz/32 kHz) contained on the chip, the system clock can be switched to high frequency input (high
speed mode), or to low frequency input (low speed mode).
The system clock is generated by dividing the oscillation clock. The best operation clock for the system can be selected by switching its
frequency by software. High speed mode has the normal mode which is based on 2-cycle clock (fosc/2) and the double speed mode which is
based on the same cycle clock with fosc.
A machine cycle (min. instructions execution) in the normal mode is 250 ns when fosc is 8 MHz, and when fosc is 4 MHz, a machine
cycle is 500 ns. A machine cycle in the double speed mode is 125 ns when fosc is 8 MHz, and 250 ns when fosc is 4 MHz. The package are
48-pin TQFP and 44-pin QFP.
Product Summary
This datasheet describes the following model of MN101C97 series. These products have identical function.
However, MN101C97D is described mainly.
Model
ROM Size
RAM Size
Classification
Package
QFP044-P-1010F
MN101C97A
32 KB
1 KB
Mask ROM version
TQFP048-P-0707B
QFP044-P-1010F
MN101C97D
64 KB
64 KB
1 KB
1 KB
Mask ROM version
TQFP048-P-0707B
QFP044-P-1010F
MN101CF97D
Flash EEPROM version
TQFP048-P-0707B
Publication date: January 2011
Ver. JEM
1
MN101C97 Series
Features
ꢀ ROM Size:
MN101C97D, MN101CF97D
65536 × 8 bit
32768 × 8 bit
MN101C97A
ꢀꢀRAM Size: 1024 × 8 bit
ꢀꢀPackage:
TQFP48 (7mm square, 0.5mm pitch)
QFP44 (10mm square, 0.8mm pitch) *Under planning
ꢀMachine Cycle:
<Mask ROM version MN101C97A/ MN101C97D>
High speed mode <fs = fosc / 1>
0.125 ms / 8 MHz (2.7 V to 3.6 V)
0.250 ms / 4 MHz (1.8 V to 3.6 V)
High speed mode <fs = fosc / 2>
0.250 ms / 8 MHz (2.2 V to 3.6 V)
0.500 ms / 4 MHz (1.8 V to 3.6 V)
Low speed mode <fs = fx / 2>
62.5 ms / 32 kHz
(1.8 V to 3.6 V)
<Flash EEPROM version MN101CF97D>
High speed mode <fs = fosc / 1>
0.250 ms / 4 MHz (2.2 V to 3.6 V)
0.270 ms / 3.7 MHz (2.0 V to 3.6 V)
0.500 ms / 2 MHz (1.8 V to 3.6 V)
High speed mode <fs = fosc / 2>
0.250 ms / 8 MHz (2.2 V to 3.6 V)
0.500 ms / 4 MHz (1.8 V to 3.6 V)
Low speed mode <fs = fx / 2>
62.5 ms / 32 kHz
(1.8 V to 3.6 V)
ꢀClock Gear Circuit Embedded:
The operation speed of system clock can be changed by switching the dividing ratio of the oscillation clock.
(1, 2, 4, 8, 16, 32, 64, 128 dividing)
ꢀꢀOscillation Circuit:
2 channels oscillation circuits (High-speed / Low-speed)
ꢀꢀOperation Modes:
NORMAL mode (High-speed mode)
SLOW mode (Low-speed mode)
HALT mode (High-speed / Low-speed mode)
STOP mode
The operation clock can be switched in each mode.
ꢀꢀROM Correction:
Maximum of 3 parts in a program
ꢀꢀOperation Voltage: 1.8 V to 3.6 V
ꢀꢀOperation Temperature: -40°C to + 85°C
Ver. JEM
2
MN101C97 Series
Features (Continued)
ꢀꢀMemory bank:
Data memory space expansion by bank form (64 KB/2 bank)
Bank for source address / Bank for destination address
ꢀInterrupts: 20 interrupts
<External Interrupt> Rising/ falling edge can be specified.
IRQ0 - External Interrupt (Noise filter connectable)
IRQ1 - External Interrupt (Noise filter connectable)
IRQ2 - External Interrupt (Both edges selectable)
IRQ3 - External Interrupt (Both edges selectable)
IRQ4 - External Interrupt (Both edges selectable)
IRQ5 - External Interrupt (Both edges selectable)
IRQ6 - External Interrupt (Key scan interrupt only)
<Timer Interrupt>
TM0IRQ - Timer 0 interrupt (8-bit timer)
TM1IRQ - Timer 1 interrupt (8-bit timer)
TM2IRQ - Timer 2 interrupt (8 bit timer)
TM3IRQ - Timer 3 interrupt (8-bit timer)
TM6IRQ - Timer 6 interrupt (8-bit timer)
TM7IRQ - Timer 7 interrupt (16-bit timer)
T7OC2IRQ - Timer 7 interrupt (16-bit timer)
TBIRQ - Time base timer interrupt
<Serial Interface Interrupt>
SC0RIRQ - Serial 0 interrupt (UART reception)
SC0TIRQ - Serial 0 interrupt (UART transmission, Synchronous)
SC3IRQ - Serial 3 interrupt (Single master IIC, Synchronous)
<Watchdog Timer Interrupt>
NMI - Watchdog timer overflow
<A/D Conversion End Interrupt>
ADIRQ -A/D conversion end
ꢀꢀA/D Converter: 10 bit × 8 channels
ꢀTimer Counter: 8 timers
All timer counters generate Interrupt.
Timer 0 - 8-bit timer
Square wave output, PWM output, Event count, Simple pulse width measurement
Added pulse (2-bit) PWM output, Remote control carrier output
Clock source: fosc, fosc/4, fosc/16, fosc/32, fosc/64, fs/2, fs/4, fx, external clock
Square wave output and PWM output can be output to the large current pin, P51 (TM0O).
Timer 1 - 8-bit timer
Square wave output, Event count, Cascade connection to timer 0
Clock source: fosc, fosc/4, fosc/16, fosc/64, fosc/128, fs/2, fs/8, fx, external clock, timer 7 output
Usable as UART baud rate timer
Timer 2 - 8-bit timer
Square wave output, PWM output, Event count, Simple pulse width measurement
Clock source: fosc, fosc/4, fosc/16, fosc/32, fosc/64, fs/2, fs/4, fx, external clock
Added pulse (2-bit) PWM output
Square wave output and PWM output can be output to the large current pin, P52 (TM2O).
Usable as UART baud rate timer
Ver. JEM
3
MN101C97 Series
Features (Continued)
Timer 3 - 8-bit timer
Square wave output, Event count, Cascade connection to timer 2
Clock source: fosc, fosc/4, fosc/16, fosc/64, fosc/128, fs/2, fs/8, fx, external clock
Timer 6 - 8-bit timer
One minute meter is available when combined with the timer base timer.
Clock source: fosc, fs, fx, time base output (1/27 or 1/213)
Timer 7 - 16-bit timer (Double buffer composition)
Square wave output and PWM output (Duty/Cycle continuous changeable) can be output to the large current pin, P53 (TM7O).
Event count, Pulse width measurement, Input capture, Remote control carrier output
Clock source: 1/1, 1/2, 1/4 or 1/16 of fosc, fs or external clock.
Timer base timer
Clock source: fosc, fx
Interrupt generation cycle: fosc, fosc/27, fosc/28, fosc/29, fosc/210, fosc/212, fosc/ 213, fosc/214, fosc/215, fx, fx/27,
fx/28, fx/29, fx/210, fx/212, fx/213, fx/214, fx/215
Watchdog timer
Error detection cycle: selectable from fs/216, fs/218, and fs/220.
ꢀꢀBuzzer output, Inverted Buzzer output:
Output frequency can be selected from fosc/29, fosc/210, fosc/211, fosc/212, fosc/213, fosc/214, fx/23, fx/24
ꢀꢀRemote control carrier output:
Based on timer 0 and timer 7 output, a remote control carrier with duty cycle of 1/2 or 1/3 can be output.
ꢀꢀClock output:
Fosc output or fs output is available.
ꢀSerial Interface: 2 channels
Serial interface 0 : 3 channel type synchronous / Full duplex UART
Transfer clock: fosc/2, fosc/4, fosc/16, fosc/64, fs/2, fs/4, timer 1 (or timer 2) output, timer 2 output/2, timer 2 output/8
At UART, timer 1 (or timer 2) is used as a baud rate timer
MSB/LSB can be selected as the first bit to be transferred.
Any transfer size from 1 to 8 bits can be selected.
Parity check, parity addition, overrun and framing error detection.
Usable as 2 channel type serial interface.
Serial 0 I/O (SBO0, SBI0, SBT0) can be switched to either P10 to P12 or P43 to P45.
Serial interface 3 : 3 channel type synchronous / Single Master IIC Interface
IIC communication for single master (9-bit transfer)
Transfer clock: fosc/2, fosc/4, fosc/16, fosc/64, fs/2, fs/4, timer 1 (or timer 2) output
MSB/LSB can be selected as the first bit to be transferred.
Any transfer size from 1 to 8 bits can be selected.
ꢀꢀExternal Interrupt: 7 interrupts
Edge selectable (rising edge, falling edge)
Noise filter connectable (IRQ0, IRQ1)
× 2 sets
Edge selectable (rising edge, falling edge, both edges) (IRQ 2,3,4,5)
Key scan interrupt only (IRQ6)
× 4 sets
× 1 set
ꢀꢀLED driver: 6 pins (44-pin QFP package are 4 pins)
Ver. JEM
4
MN101C97 Series
ꢀFeatures (Continued)
I/O port: 48 pin TQFP package
I/O port
38 ports
6 port
Ports also used as LED (large current) driver ports
Ports also used asA/D input
8 ports
1 port
Port also used as remote control carrier output
Ports also used as timer output
3 ports
5 ports
2 ports
8 ports
6 ports
9 ports
Ports also used as timer I/O
Ports also used as buzzer output
Ports also used as key interrupt input
Ports also used as external interrupt input
Ports also used as serial interface ports
Special function pins
Analog reference voltage input pin
Mode setting pins
10 ports
1 port
2 ports
1 port
Reset input pin
Oscillator pins
4 ports
2 ports
Power supply pins
I/O port: 44 pin QFP package
I/O port
34 ports
4 ports
8 ports
1 port
Ports also used as LED (large current) driver ports
Ports also used asA/D input
Port also used as remote control carrier output
Ports also used as timer output
3 ports
5 ports
2 ports
7 ports
6 ports
9 ports
Ports also used as timer I/O
Ports also used as buzzer output
Ports also used as key interrupt input
Ports also used as external interrupt input
Ports also used as serial interface ports
Special function pins
Analog reference voltage input pin
Mode setting pins
10 ports
1 port
2 ports
1 port
Reset input pin
Oscillator pins
4 ports
2 ports
Power supply pins
Ver. JEM
5
MN101C97 Series
Pin Description
ꢀ TQFP048-P-0707B
36
35
34
33
32
31
30
29
28
27
26
25
P31/KEY1/TM1IO
P30/KEY0/TM0IO
P25/IRQ5/CLKOUT
P24/IRQ4
1
DMOD
VDD
2
3
NRST/P27
XO
4
P23/IRQ3
5
XI
MN101C97A/D
48pin TQFP
P22/IRQ2
6
MMOD
P21/IRQ1
7
OSC1
TOP VIEW
P20/IRQ0
8
OSC2
P13
9
VSS
P12/SBT0A
10
11
12
LED5/P55
RMOUT/LED0/P50
TM0O/LED1/P51
P11/TXD0A/SBO0A
P10/RXD0A/SBI0A
Ver. JEM
6
MN101C97 Series
Pin Description (Continued)
ꢀ QFP044-P-1010F
33
32
31
30
29
28
27
26
25
24
23
P31/KEY1/TM1IO
P30/KEY0/TM0IO
P25/IRQ5/CLKOUT
P24/IRQ4
1
2
DMOD
VDD
3
NRST/P27
4
XO
XI
MN101C97A/D
44pin QFP
P23/IRQ3
5
P22/IRQ2
MMOD
6
TOP VIEW
P21/IRQ1
OSC1
7
P20/IRQ0
OSC2
8
P12/SBT0A
VSS
9
P11/TXD0A/SBO0A
P10/RXD0A/SBI0A
RMOUT/LED0/P50
TM0O/LED1/P51
10
11
Ver. JEM
7
Request for your special attention and precautions in using the technical information and
semiconductors described in this book
(1) If any of the products or technical information described in this book is to be exported or provided to non-residents, the laws and
regulations of the exporting country, especially, those with regard to security export control, must be observed.
(2) The technical information described in this book is intended only to show the main characteristics and application circuit examples
of the products. No license is granted in and to any intellectual property right or other right owned by Panasonic Corporation or any
other company. Therefore, no responsibility is assumed by our company as to the infringement upon any such right owned by any
other company which may arise as a result of the use of technical information described in this book.
(3) The products described in this book are intended to be used for general applications (such as office equipment, communications
equipment, measuring instruments and household appliances), or for specific applications as expressly stated in this book.
Consult our sales staff in advance for information on the following applications:
– Special applications (such as for airplanes, aerospace, automotive equipment, traffic signaling equipment, combustion equipment,
life support systems and safety devices) in which exceptional quality and reliability are required, or if the failure or malfunction of
the products may directly jeopardize life or harm the human body.
It is to be understood that our company shall not be held responsible for any damage incurred as a result of or in connection with
your using the products described in this book for any special application, unless our company agrees to your using the products in
this book for any special application.
(4) The products and product specifications described in this book are subject to change without notice for modification and/or im-
provement. At the final stage of your design, purchasing, or use of the products, therefore, ask for the most up-to-date Product
Standards in advance to make sure that the latest specifications satisfy your requirements.
(5) When designing your equipment, comply with the range of absolute maximum rating and the guaranteed operating conditions
(operating power supply voltage and operating environment etc.). Especially, please be careful not to exceed the range of absolute
maximum rating on the transient state, such as power-on, power-off and mode-switching. Otherwise, we will not be liable for any
defect which may arise later in your equipment.
Even when the products are used within the guaranteed values, take into the consideration of incidence of break down and failure
mode, possible to occur to semiconductor products. Measures on the systems such as redundant design, arresting the spread of fire
or preventing glitch are recommended in order to prevent physical injury, fire, social damages, for example, by using the products.
(6) Comply with the instructions for use in order to prevent breakdown and characteristics change due to external factors (ESD, EOS,
thermal stress and mechanical stress) at the time of handling, mounting or at customer's process. When using products for which
damp-proof packing is required, satisfy the conditions, such as shelf life and the elapsed time since first opening the packages.
(7) This book may be not reprinted or reproduced whether wholly or partially, without the prior written permission of our company.
20100202
相关型号：
MN101CFA7D
Microcontroller, 8-Bit, FLASH, 10MHz, CMOS, PQFP48, 7 X 7 MM, LEAD FREE, PLASTIC, QFP-48
PANASONIC
MN101CP28DHT
Microcontroller, 8-Bit, OTPROM, 20MHz, CMOS, PQFP80, 14 X 14 MM, LEAD FREE, PLASTIC, LQFP-80
PANASONIC
MN101CP38C
Microcontroller, 8-Bit, OTPROM, 20MHz, CMOS, PQFP100, 14 X 14 MM, LEAD FREE, PLASTIC, LQFP-100
PANASONIC
MN101CP54CBF
Microcontroller, 8-Bit, OTPROM, 20MHz, CMOS, PQFP80, 18 X 18 MM, 0.80 MM PITCH, PLASTIC, QFP-84
PANASONIC
MN101CP66DBF
Microcontroller, 8-Bit, FLASH, 20MHz, CMOS, PQFP84, 18 X 18 MM, 0.80 MM PITCH, PLASTIC, QFP-80
PANASONIC
©2020 ICPDF网 联系我们和版权申明