MN101DF09GAF [PANASONIC]

Microcontroller, 8-Bit, FLASH, MN101C00 CPU, 14.32MHz, CMOS, PQFP100, 18 X 18 MM, LEAD FREE, PLASTIC, QFP-100;


型号：	MN101DF09GAF
厂家：	PANASONIC
描述：	Microcontroller, 8-Bit, FLASH, MN101C00 CPU, 14.32MHz, CMOS, PQFP100, 18 X 18 MM, LEAD FREE, PLASTIC, QFP-100 微控制器和处理器外围集成电路时钟
文件：	总5页 (文件大小：323K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

MN101D09E

Type

MN101D09E

Mask ROM

80K

MN101DF09G

FLASH

128K

Internal ROM type

ROM (byte)

RAM (byte)

Package (Lead-free)

QFP100-P-1818B

[With main clock operated]

0.1397 µs (at 4.0 V to 5.5 V, 14.32 MHz)

71.5 µs (at 2.7 V to 5.5 V, 14.32 MHz internal

frequency di Vision)

0.1397 µs (at 4.0 V to 5.5 V, 14.32 MHz)

71.5 µs (at 2.7 V to 5.5 V, 14.32 MHz internal

frequency di Vision)

Minimum Instruction

Execution Time

[When sub-clock operated]

61 µs (at 2.5 V to 5.5 V, 32.768 kHz)

 Interrupts

RESET, Runaway, External 0 to 4, Timer 0 to 3, Timer 6, Capstan FG, Control, HSW, Cylinder(Drum) FG, Servo V-sync,

Synchronous output, OSD, XDS, Serial 1, Serial 2, PWM 4, OSD V-sync

 Timer Counter

Timer counter 0 : 8-bit × 1 (timer function)

Clock source................ 1/4, 1/16 of system clock frequency

Interrupt source ........... overﬂow of timer counter 0

Timer counter 1 : 8-bit × 1 (timer function, linear timer counter function)

Clock source................ 1/4 of system clock frequency; CTL signal

Interrupt source ........... overﬂow of timer counter 1

Timer counter 2 : 16-bit × 1 (timer function, input capture (CTL speciﬁed edge), duty judgment of CTL signal)

Clock source................ 1/4, 1/16, 1/24 of system clock frequency

Interrupt source ........... overﬂow of timer counter 2; input of CTL speciﬁed edge; underﬂow of timer 2 shift register 4-bit counter;

coincidence of timer 2 shift register with timer 2 shift register compare register

Timer counter 3 : 16-bit × 1 (timer function)

Clock source................ 1/4, 1/16 of system clock frequency

Interrupt source ........... overﬂow of timer counter 3

Timer counter 5 : 19-bit × 1 (watchdog, stable oscillation waiting function)

Clock source................ system clock

Watchdog interrupt source... 1/2¹⁶, 1/2¹⁹of timer counter 5 frequency

Clear by stable oscillation ... after 256 counts by timer counter 5 (2¹⁸counts of OSC oscillation clock)

Timer counter 6 : 16-bit × 1 (clock function [max. 2 s])

Clock source................ 1/512 of OSC oscillation clock frequency; XI oscillation clock; 1/8, 1/128 of system clock frequency

Interrupt source ........... 1/2¹³, 1/2¹4^,1/2¹⁵overﬂow of timer counter 6

 Serial interface

Serial 1 : 8-bit × 1 (synchronous type)

(transfer direction of MSB/LSB selectable, start condition function)

Clock source................ 1/8, 1/16, 1/32, 1/64, 1/128, 1/256 of system clock frequency; NSBT1 pin input

Serial 2 : 8-bit × 1 (I²C)

(master transmission/reception, slave transmission/reception)

Clock source................ 1/144 to 1/252 of system clock; SCK pin input

MAD00033EEM

MN101D09E

 OSD

Display mode ...........................Menu(Internal synchronized ) display, super impose(external synchronized) display

Applicable broadcasting system....NTSC, PAL, PAL-M, PAL-N

Screen conﬁguration ................24 characters × 2n rows (n = 1 to 6)

Character type ..........................max. 128 character types (variable, include special characters)

Character size...........................12 × 18 dots (Vertical direction : 1 dot for 2H at not enlargement)

Enlarged characters..................each × 2 settings in horizontal and vertical

Character interpolation.............none

Line background color .............8-hue settable in the row unit at menu display

Line background intensity........8 gradations settable in the row unit

Screen background color..........8-hue settable at omenu display

Character color.........................white

Character intensity ...................8 gradations settable in the row unit

Frame function.........................1-dot frame in 4 directions

Frame intensity.........................4 gradations settable in the row unit

Blinking....................................none (covered by software)

Inverted character.....................settable in the character unit

Halftone....................................none

Input .........................................composite video signal input (output level : 1 V[p-p] / 2 V[p-p])

Clamp method..........................sync tip clamp, clamp level in 4 levels

Output ......................................composite video output

Measure against image ﬂuctuation......built-in AFC circuit

Dot clock..................................1/2 of OSC oscillation clock (automatic phase adjustment)

 XDS

Built-in U.S. closed caption data slicer (optional 1 line data can be extracted.)

 I/O Pins

I/O

Common use : 45

Common use : 1

Input

 A/D converter

8-bit × 11-ch. (without S/H)

 PWM

13-bit × 2-ch. (at repetition cycle 572 ms at 14.32 MHz),

8-bit × 1-ch. (at repetition cycle 71.5 ms, 0.572 ms, 1.14 ms, 2.29 ms at 14.32 MHz)

 ICR

16-bit × 2-ch.(Speed system),

18-bit × 4-ch.(Phase system)

 OCR

16-bit × 3 (Synchronous output × 2, Rec CTL × 1 )

 Special Ports

3-state output (PTO) VLP pin; CTL input; Capstan FG input; Cylinder(Drum) PG/FG inputs; HSW output; Head amp/ Rotary control

outputs; output of 1/4 OSC oscillation clock (1 V[p-p])

 ROM Correction

Correcting address designation : up to 3 addresses possible

Correction method : correction program being saved in internal RAM

MAD00033EEM

 Electrical Charactreistics (Supply current)

Limit

typ

Parameter

Symbol

Condition

Unit

min

max

100

IDD1

IDD2

14.32 MHz operation without load, VDD = 5 V

1/1024 of 14.32 MHz operation without load, VDD = 2.7 V

Operating supply current

Stop of 14.32 MHz oscillation, VDD = 2.7 V

32 kHz oscillation operation without load

IDD3

100

µA

Supply current at STOP

Supply current at HALT

IDSP

Stop of oscillation without load, VDD = 5 V

µA

IDHT0 14.32 MHz oscillation without load, VDD = 5 V

Stop of 14.32 MHz oscillation, VDD = 2.7 V

IDHT1

µA

32 kHz oscillation operation without load

(Ta = 25°C±2°C , VSS = 0 V)

 Electrical Charactreistics (A/D converter characteristics)

Limit

Unit

Parameter

Symbol

Condition

min

typ

max

Conversion relative error

A/D Conversion Time

Analog Input Voltage

LSB

µs

∆NLAD

±3

tAD

fosc = 14.32 MHz

(Ta = 25°C±2°C , VDD = 5.0 V , VSS = 0 V)

 Development tools

In-circuit Emulator

PX-ICE101C/D + PX-PRB101D08-QFP100-P-1818B-M

MAD00033EEM

MN101D09E

 Pin Assignment

CVIN2(PB4↔)

CVIN(PB5↔)

VSS2

CVOUT(PB6↔)

N.C.

SXI

XO(P23↔)

XI(P24↔)

VSS

OSCI

OSCO

VDD

PWM4(P25↔)

PWM0

100

N.C.

AD10(↔PC2)

AD9(↔PC1)

AD8(↔PC0)

AD7(↔P87)

AD6(↔P86)

AD5(↔P85)

AD4(↔P84)

AD3(↔P83)

AD2(↔P82)

AD1(↔P81)

AD0(↔P80)

P77

MN101D09E

P76

P75

P74

P73

P72

P71

P70

PWM1

SBUFD1(P11↔)

SBUFD2(P12↔)

SBUFD3(P13↔)

SBUFD4(TC60, P14↔)

SBUFD5(P15↔)

ROTA(↔P67)

HAMP(↔P66)

DENV(↔P65)

SBUFD6(P16↔)

SBUFD7(OSCDIV, P17↔)

QFP100-P-1818B

MAD00033EEM

Request for your special attention and precautions in using the technical information and

semiconductors described in this book

(1) If any of the products or technical information described in this book is to be exported or provided to non-residents, the laws and

regulations of the exporting country, especially, those with regard to security export control, must be observed.

(2) The technical information described in this book is intended only to show the main characteristics and application circuit examples

of the products, and no license is granted under any intellectual property right or other right owned by our company or any other

company. Therefore, no responsibility is assumed by our company as to the infringement upon any such right owned by any other

company which may arise as a result of the use of technical information described in this book.

(3) The products described in this book are intended to be used for standard applications or general electronic equipment (such as office

equipment, communications equipment, measuring instruments and household appliances).

Consult our sales staff in advance for information on the following applications:

– Special applications (such as for airplanes, aerospace, automobiles, traffic control equipment, combustion equipment, life support

systems and safety devices) in which exceptional quality and reliability are required, or if the failure or malfunction of the prod-

ucts may directly jeopardize life or harm the human body.

– Any applications other than the standard applications intended.

(4) The products and product specifications described in this book are subject to change without notice for modification and/or im-

provement. At the final stage of your design, purchasing, or use of the products, therefore, ask for the most up-to-date Product

Standards in advance to make sure that the latest specifications satisfy your requirements.

(5) When designing your equipment, comply with the range of absolute maximum rating and the guaranteed operating conditions

(operating power supply voltage and operating environment etc.). Especially, please be careful not to exceed the range of absolute

maximum rating on the transient state, such as power-on, power-off and mode-switching. Otherwise, we will not be liable for any

defect which may arise later in your equipment.

Even when the products are used within the guaranteed values, take into the consideration of incidence of break down and failure

mode, possible to occur to semiconductor products. Measures on the systems such as redundant design, arresting the spread of fire

or preventing glitch are recommended in order to prevent physical injury, fire, social damages, for example, by using the products.

(6) Comply with the instructions for use in order to prevent breakdown and characteristics change due to external factors (ESD, EOS,

thermal stress and mechanical stress) at the time of handling, mounting or at customer's process. When using products for which

damp-proof packing is required, satisfy the conditions, such as shelf life and the elapsed time since first opening the packages.

(7) This book may be not reprinted or reproduced whether wholly or partially, without the prior written permission of Matsushita

Electric Industrial Co., Ltd. Industrial Co., Ltd.

MN101DF09GAF [PANASONIC]

相关型号：

SI9130DB

SI9135LG-T1

SI9135LG-T1-E3

SI9135_11

SI9136_11

SI9130CG-T1-E3

SI9130LG-T1-E3

SI9130_11

SI9137

SI9137DB