MN102HF60G [PANASONIC]
Microcomputers/Controllers; 微型计算机/控制器
| 型号： | MN102HF60G |
| 厂家： | 
PANASONIC |
| 描述： | Microcomputers/Controllers |
| 文件： | 总5页 (文件大小：118K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
MN102H60G , MN102H60K
MN102H60G
MN102H60K
256 K
Type
128 K
ROM (×8-bit)
RAM (×8-bit)
Package
4 K
8 K
LQFP100-P-1414 *Lead-free , MLGA100-L-1010 *Lead-free
LQFP100-P-1414
*Lead-free
Minimum Instruction
Execution Time
With main clock operated
58 ns (at 3.0 V to 3.6 V, 34 MHz)
• RST pin • Watchdog • NMI pin • Timer counter 0 to 7 underflow • Timer counter 8 to 12 underflow
• Timer counter 8 to 12 compare capture A • Timer counter 8 to 12 compare capture B
• ATC ch.0 to 3 transfer finish • ETC ch.0 to 1 transfer finish
Interrupts
• External 0 to 4 • Serial ch.0 to 4 transmission • Serial ch.0 to 4 reception • KI pin (OR)
• A/D conversion finish
Timer counter 0 : 8-bit × 1 (prescaler, timer output, event count, clock supply for 16-bit timer, timer interrupts)
Clock source ····················· 1/2 of system clock (BOSC) frequency; 1/4 of system clock (XI) frequency;
system clock (BOSC); TM0IO pin
Timer Counter
Interrupt source ················ underflow of timer counter 0
Timer counter 1 : 8-bit × 1 (serial clock generator, timer interrupts)
Clock source ····················· 1/2 of system clock (BOSC) frequency; underflow of timer counter 0, 4
Interrupt source ················ underflow of timer counter 1
Timer counter 2 : 8-bit × 1 (serial clock generator, timer interrupts)
Clock source ····················· 1/2 of system clock (BOSC) frequency; underflow of timer counter 0, 4
Interrupt source ················ underflow of timer counter 2
Timer counter 3 : 8-bit × 1 (A/D conversion start up, timer interrupts)
Clock source ····················· 1/2 of system clock (BOSC) frequency; underflow of timer counter 0, 4
Interrupt source ················ underflow of timer counter 3
Timer counter 4 : 8-bit × 1
(prescaler, serial clock generator, timer output, event count, clock supply for 16-bit timer, timer interrupts)
Clock source ····················· 1/2 of system clock (BOSC) frequency; underflow of timer counter 0; TM4IO pin
Interrupt source ················ underflow of timer counter 4
Timer counter 5 : 8-bit × 1 (serial clock generator, timer interrupts)
Clock source ····················· 1/2 of system clock (BOSC) frequency; underflow of timer counter 0;
system clock (BOSC)
Interrupt source ················ underflow of timer counter 5
Timer counter 6 : 8-bit × 1 (timer interrupts)
Clock source ····················· 1/4 of system clock (XI) frequency; underflow of timer counter 0, 4
Interrupt source ················ underflow of timer counter 6
Timer counter 7 : 8-bit × 1 (timer output, event count, timer interrupts)
Clock source ····················· 1/4 of system clock (XI) frequency; underflow of timer counter 0; TM7IO pin
Interrupt source ················ underflow of timer counter 7
Connectable
timer counter 0 to 7
Timer counter 8 : 16-bit × 1 (timer output, event count, input capture, PWM output, 2-phase encoder input)
Clock source ····················· underflow of timer counter 0, 4; TM8IOB pin; 1/2 of system clock (BOSC)
frequency; 2-phase encode of TM8IOA pin/TM8IOB pin (1 ×, 4 ×); TM8IC pin
Interrupt source ················ underflow of timer counter 8; timer counter 8 compare capture A;
timer counter 8 compare capture B
MAE00005EEM
MN102H60G , MN102H60K
Timer counter 9 : 16-bit × 1 (timer output, event count, input capture, PWM output, 2-phase encoder input)
Clock source ····················· underflow of timer counter 0, 4; TM9IOB pin; 1/2 of system clock (BOSC)
frequency; 2-phase encode of TM9IOA pin/TM9IOB pin (1 ×, 4 ×)
Timer Counter (Continue)
Interrupt source ················ underflow of timer counter 9; timer counter 9 compare capture A;
timer counter 9 compare capture B
Timer counter 10 : 16-bit × 1 (timer output, event count, input capture, PWM output, 2-phase encoder input)
Clock source ····················· underflow of timer counter 0, 4; TM10IOB pin; 1/2 of system clock (BOSC)
frequency; 2-phase encode of TM10IOA pin/TM10IOB pin (1 ×, 4 ×)
Interrupt source ················ underflow of timer counter 10; timer counter 10 compare capture A;
timer counter 10 compare capture B
Timer counter 11 : 16-bit × 1 (timer output, event count, input capture, PWM output, 2-phase encoder input)
Clock source ····················· underflow of timer counter 0, 4; TM11IOB pin; 1/2 of system clock (BOSC)
frequency; 2-phase encode of TM11IOA pin/TM11IOB pin (1 ×, 4 ×)
Interrupt source ················ underflow of timer counter 11; timer counter 11 compare capture A;
timer counter 11 compare capture B
Timer counter 12 : 16-bit × 1 (timer output, event count, input capture, PWM output, 2-phase encoder input)
Clock source ····················· underflow of timer counter 0, 4; 1/2 of system clock (BOSC) frequency;
2-phase encode of TM12IOA pin/TM12IOB pin (1 ×, 4 ×), TM12IOB pin
Interrupt source ················ underflow of timer counter 12; timer counter 12 compare capture A;
timer counter 12 compare capture B
Timer counter 13, 14 : 8-bit × 1 (simple PWM output)
Clock source ····················· 1/2 of system clock (BOSC) frequency; underflow of timer counter 0
Timer counter 15 : 16-bit × 1 (pulse width measurement)
Clock source ····················· system clock (BOSC); 1/2 of system clock (BOSC) frequency; underflow of
timer counter 0; TM15IB pin
Connectable
timer counter 13, 14
Serial 0, 1 : 8-bit × 1 (transfer direction of MSB / LSB selectable, transmission / reception of 7, 8-bit length)
Clock source ····················· 1/8 of timer counter 1 underflow frequency; 1/8, 1/2 of timer counter 2
underflow frequency; external pin
Serial Interface
Serial 2, 3 : 8-bit × 1 (transfer direction of MSB / LSB selectable, transmission / reception of 7, 8-bit length)
Clock source ····················· 1/8 of timer counter 4 underflow frequency; 1/8, 1/2 of timer counter 5
underflow frequency; external pin
Serial 4 : 8-bit × 1 (transfer direction of MSB / LSB selectable, transmission / reception of 7, 8-bit length)
Clock source ····················· 1/8 of timer counter 1 underflow frequency; 1/8, 1/2 of timer counter 5
underflow frequency; external pin
UART × 2 (common use with serial 3, 4)
I2C × 2 (common use with serial 3,4; single master)
82
• Common use : 46 (address data separate 8-bit mode) • Common use : 53 (address data multiplex 8-bit mode)
I/O Pins
A/D Inputs
PWM
I/O
10-bit × 8-ch. (with S/H)
16-bit × 5-ch. (timer counter 8 to 12)
16-bit × 5-ch. (timer counter 8 to 12)
16-bit × 5-ch. (timer counter 8 to 12)
ICR
OCR
Address / data multiplex bus interface, address / data separate bus interface,
8-bit / 16-bit bus width selectable
Notes
See the next page for electrical characteristics, pin assignment and support tool.
MAE00005EEM
Electrical Characteristics
Supply current
Limit
typ
Parameter
Symbol
IDDopr
IDDS
Condition
Unit
min
max
VI = VDD or VSS, output open
f = 34 MHz , VDD = 3.3 V
Operating supply current
Supply current at STOP
Supply current at HALT
60+10α * mA
Pin with pull-up resistor is open
70
µA
All other input pins and Hi-Z state input/output
pins are simultaneously applied VDD or VSS level
f = 34 MHz , VDD = 3.3 V, output open
IDDH
30+10α * mA
(Ta = −40°C to +85°C , VDD = AVDD = 3.3 V , VSS = AVSS = 0 V)
* ”α ” depends on products.
MN102H60G, MN102H60K : α = 0
MN102HF60G : α = 1
MN102HF60K : α = 2
A/D characteristics
Parameter
Limit
Unit
Symbol
Condition
min
typ
max
Non-linear error
10-bit
± 4
LSB
µ s
A/D conversion time
Analog input voltage
at 34 MHz
3.29
VSS
VIA
VDD
V
(Ta = 25°C , VDD = AVDD = 3.3 V , VSS = AVSS = 0 V)
MAE00005EEM
MN102H60G ,MN102H60K
Pin Assignment
PA0,IRQ0
P82,TM0IO,SBT3,SCL3,SBI2
P81,TM140B
P80,TM140A
A23,P47,AN7,WDOUT
A22,P46,AN6,STOP
A21,P45,AN5
A20,P44,AN4
VREF-
PA1,IRQ1
PA2,IRQ2
PA3,IRQ3
PA4,IRQ4,TM15IB
(ADSEP)
RST
VDD
D0
A19,P43
D1
A18,P42
D2
A17,P41
D3
A16,P40
MN102H60G
MN102H60K
D4
A15,P37,KI7
A14,P36,KI6
A13,P35,KI5
A12,P34,KI4
AVDD
D5
D6
D7
VSS
D8
A11,P33,KI3
A10,P32,KI2
A9,P31,KI1
A8,P30,KI0
A7,P27
D9
D10
D11
D12
D13
D14
D15
A6,P26
A5,P25
A4,P24,TM15IA
*Lead-free
LQFP100-P-1414
* Use 33 kΩ to 50 kΩ.
* Pin position in 16-bit bus width address data split memory extension mode.
Support Tool
PX-ICE102H60-LQFP100-P-1414
In-circuit Emulator
Flash Memory Built-in Type
Type
MN102HF60G, MN102HF60K
128 K / 256 K
ROM (× 8-bit)
RAM (× 8-bit)
4 K / 10 K
Minimum instruction execution time
Package
58 ns (at 3.0 V to 3.6 V, 34 MHz)
*Lead-free
LQFP100-P-1414
MAE00005EEM
Request for your special attention and precautions in using the technical information
and semiconductors described in this material
(1) An export permit needs to be obtained from the competent authorities of the Japanese Government if any of
the products or technical information described in this material and controlled under the "Foreign Exchange
and Foreign Trade Law" is to be exported or taken out of Japan.
(2) The technical information described in this material is limited to showing representative characteristics and
applied circuits examples of the products. It neither warrants non-infringement of intellectual property right
or any other rights owned by our company or a third party, nor grants any license.
(3) We are not liable for the infringement of rights owned by a third party arising out of the use of the technical
information as described in this material.
(4) The products described in this material are intended to be used for standard applications or general electronic
equipment (such as office equipment, communications equipment, measuring instruments and household
appliances).
Consult our sales staff in advance for information on the following applications:
• Special applications (such as for airplanes, aerospace, automobiles, traffic control equipment, combustion
equipment, life support systems and safety devices) in which exceptional quality and reliability are re-
quired, or if the failure or malfunction of the products may directly jeopardize life or harm the human body.
• Any applications other than the standard applications intended.
(5) The products and product specifications described in this material are subject to change without notice for
modification and/or improvement. At the final stage of your design, purchasing, or use of the products,
therefore, ask for the most up-to-date Product Standards in advance to make sure that the latest specifications
satisfy your requirements.
(6) When designing your equipment, comply with the guaranteed values, in particular those of maximum rating,
the range of operating power supply voltage, and heat radiation characteristics. Otherwise, we will not be
liable for any defect which may arise later in your equipment.
Even when the products are used within the guaranteed values, take into the consideration of incidence of
break down and failure mode, possible to occur to semiconductor products. Measures on the systems such as
redundant design, arresting the spread of fire or preventing glitch are recommended in order to prevent physi-
cal injury, fire, social damages, for example, by using the products.
(7) When using products for which damp-proof packing is required, observe the conditions (including shelf life
and amount of time let standing of unsealed items) agreed upon when specification sheets are individually
exchanged.
(8) This material may be not reprinted or reproduced whether wholly or partially, without the prior written
permission of Matsushita Electric Industrial Co., Ltd.
2003 SEP
相关型号：
MN102HF60M
Microcontroller, 16-Bit, FLASH, 34MHz, CMOS, PQFP100, 14 X 14 MM, PLASTIC, LQFP-100
PANASONIC
MN102HF797
Microcontroller, 16-Bit, FLASH, 12MHz, CMOS, PQFP100, 14 X 14 MM, PLASTIC, LQFP-100
PANASONIC
©2020 ICPDF网 联系我们和版权申明