MN13822S-T(TX) [PANASONIC]

Power Supply Support Circuit, Fixed, 1 Channel, CMOS, PDSO3, LEAD FREE PACKAGE-3;


型号：	MN13822S-T(TX)
厂家：	PANASONIC
描述：	Power Supply Support Circuit, Fixed, 1 Channel, CMOS, PDSO3, LEAD FREE PACKAGE-3 光电二极管
文件：	总21页 (文件大小：789K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

Microcomputer Peripheral LSIs

MN1380S Series (Lead-free Version)

CMOS LSIs for Voltage Detection

Overview

Pin Assignment

The MN1380S series are elements that monitor the

power supply voltage supplied to microcomputers and

other LSI systems and issue reset signals for initializing

the system after the power is first applied or for prevent-

ing runaway operation when the supply voltage fluctu-

ates.

MN1383 - R

There is a choice of three output types: CMOS output,

N-channel open drain output, and inverted CMOS out-

put. There are also three package types: MT-2, TO-92,

and a mini type for surface mounting.

Choose the ideal element for your application from the

series' wide selection of detection ranks (17 ranks between

2.0 and 4.9 volts), output types, and package types.

MT-2 type package

Features

Three-pin element requiring no adjustment

Wide selection of detection ranks (17 ranks between

2.0 and 4.9 volts)

Highly precise detection voltage

Detection voltage with hysteresis characteristic

∆VD = 50 mV for ranks C to K

∆VD = 100 mV for ranks L to U

Low current consumption: I_DD= 1µA (typ.) for V_DD

= 5 V

1381S

23R

Low fluctuation in detection voltage with tempera-

ture (typ. 1 mV/˚C)

TO-92 type package

Wide selection of output types: CMOS output, N-

channel open drain output, and inverted CMOS

output

Wide selection of package types: MT-2, TO-92, and

a mini type for surface mounting.

SCR

Applications

Battery checkers

1=OUT

2=V_DD

3=V_SS

Power outage detectors

Level discriminators

Mini type package

Memory backup systems

Microcomputer reset circuits

SAG00005AEM

MN1380S Series

Microcomputer Peripheral LSIs

MN1380S Series Naming Conventions

The MN1380S series offers a wide selection of detection ranks, output types, package types, and packaging. All

combinations use the following naming conventions. When ordering, be sure to give the correct part number using

these naming conventions.

MN13811S–R (TA)

Winding direction for tape packaging

(TA) ...... Tape packaging for TO-92 and MT-2 type package

(TX) ...... Embossed tape packing for mini type package

For further details, see the package specifications.

Detection voltage rank (C to U)

Lead free

Output type:

Blank ········ CMOS output

1 ················ N-channel open drain output

2 ················ inverted CMOS output

Package:

1 ················ TO-92 type package

2 ················ Mini type package

3 ················ MT-2 type package

Panasonic MN1380S series of voltage detection CMOS LSIs with low current

consumptions

(Example)

MN13821S–R (TX)

Embossed tape packaging

R rank (detection voltage of 4.0 to 4.3 V)

Lead free

N-channel open drain output

Mini type package

MN1380S series of voltage detection CMOS LSIs with low current consumption

Minimum Packaging Unit

Taping (Mini and TO-92 types) ······· 3,000

Taping (MT-2 types) ························ 2,000

Microcomputer Peripheral LSIs

MN1380S Series

Series Lineup

Package

Output

CMOS output

MT-2 type Package TO-92 type Package

Mini type Package

MN1383

MN13831

MN13832

MN1381S

MN13811S

MN13812S

MN1382S

N-channel open drain output

Inverted CMOS output

MN13821S

MN13822S

Detection Ranks (on Voltage)

Detection Voltage for Drop in Power Supply Voltage (V_DL

)

Detection Voltage Hysteresis Width (∆VD)

Rank

Unit

min

2.0

2.1

2.2

2.3

2.4

2.5

2.6

2.8

3.0

3.2

3.4

3.6

3.8

4.0

4.2

4.4

4.6

max

2.2

2.3

2.4

2.5

2.6

2.7

2.9

3.1

3.3

3.5

3.7

3.9

4.1

4.3

4.5

4.7

4.9

min

max

300

100

MN1380S Series

Microcomputer Peripheral LSIs

Block Diagram

V_DD

Voltage

Reference 1

Comparator

–

Level Converter

OUT

Output Circuit

Comparator

–

Voltage

Reference 2

V_SS

Note * : Circuits vary slightly depending on the output type (CMOS output, N-channel open drain output, or inverted CMOS

output)

Pin Descriptions

Pin No.

Symbol

OUT

V_DD

Function Description

Reset signal output pin

Power supply pin

Ground pin

V_SS

Microcomputer Peripheral LSIs

MN1380S Series

Absolute Maximum Ratings V_SS=0V, Ta=25˚C

Parameter

Symbol

Rating

Unit

Power supply voltage

V_DD

7.0

Output voltage

V_O

– 0.3 to V_DD+0.3

–20 to +70

Operating ambient temperature

Storage temperature

˚C

T_stg

–55 to +125

Recommended Operating Conditions V_SS=0V, Ta=25˚C

Parameter

Symbol

Conditions

min

typ

max

Unit

V_DD

See Figures 1 and 4.

1.5

6.0

Power supply

voltage

Electrical Characteristics

1) DC Characteristics V_SS=0V, Ta=–20˚C to +70˚C

Parameter

Symbol

Conditions

V_DD= 5 V ^*1

min

typ

max

Unit

Power supply current

I_DD

µA

Load resistance = 10 kW

Detection voltage for drop

in power supply voltage ^*2

Detection voltage hysteresis

width ^*2

V_DL

Ta=25˚C

See Figures 1 and 4.

∆VD

"H" level output voltage

V_OH

CMOS output I_OH=– 40µA

0.8V_DD

0.8

V_DD

–1.5

0.4

Inverted

V_DD=1.8V

CMOS output I_OH=– 0.5mA

N-channel open V_DD=1.8V

"L" level output voltage

V_OL

V_SS

drain output

Inverted

I_OL=0.7mA

V_DD=6.0V

V_SS

0.6

CMOS output I_OH=0.3mA

Notes

* : This includes the output pin's leakage current.

* : For particulars, see the detection voltage rank table.

MN1380S Series

Microcomputer Peripheral LSIs

Electrical Characteristics (continued)

2) AC Characteristics V_SS=0V, Ta=25˚C

Allowable Value (typ)

Unit

Parameter

Symbol Conditions

MN1383

MN13831

MN13832

MN1381S

MN1382S

MN13811S

MN13821S

MN13812S

MN13822S

Rank

3.0

2.5

3.0

230.0

100.0

See

t_OHFigures

2 and 3.

Reset release time

µs

2.0

4.0

30.0

250.0

115.0

160.0

100.0

3.0

See

t_OLFigures

2 and 3.

Reset time

µs

15.0

35.0

3.0

Microcomputer Peripheral LSIs

MN1380S Series

Description of Operation

V_DD

V_DH

V_DL

1.5V

MN1383/1381S/1382S

MN13831/13811S/13821S

CMOS output, N-channel

open drain output

V_OUT

t_OH

t_OL

Inverted CMOS

output Figure

MN13832/13812S/13822S

V_OUT

t_OL

t_OH

Figure 1. Description of Operation

Notes

1: Output cannot be specified for power supply voltages under 1.5 V because operation is not guaranteed for that range.

2: V_DL: Detection voltage for drop in power supply voltage

V_DH: Detection voltage for rise in power supply voltage

t_OL: Time lag between the time that the power supply voltage reaches the detection voltage (V_DLor V_DH) and the time that the

output pin (OUT) goes to "L" level.

t_OH: Time lag between the time that the power supply voltage reaches the detection voltage (V_DLor V_DH) and the time that

the output pin (OUT) goes to "H" level.

3: These characteristics for the N-channel open drain output are when a load resistor is connected between the OUT and V_DD

pins.

MN1380S Series

Microcomputer Peripheral LSIs

Description for Measuring the Output Characteristics

V_DD

6.0V

1.6V

6.0V

CMOS output, N-channel

open drain output

MN1383/1381S/1382S

MN13831/13811S/13821S

t_OH

1.5V

t_OL

1.0V

Inverted CMOS output MN13832/13812S/13822S

6.0V

1.6V

1.5V

t_OH

1.0V

Figure 2. Description chart of Measuring the Output Characteristics

Switch: Connect when measuring

100kΩ

N-channel open drain output

(MN13831/MN13811S/MN13821S)

V_DD

MN1380S Series

100pF

V_OUT

Figure 3. Circuit for Measuring the Output Characteristics

Microcomputer Peripheral LSIs

Description for Measuring the I/O Characteristics

V_OUT

MN1380S Series

CMOS output, N-channel

open drain output

MN1383/1381S/1382S

MN13831/13811S/13821S

∆VD

Operation indeterminate

1.5V

V_DD

V_DL

V_DH

V_OUT

Inverted CMOS output

MN13832/13812S/13822S

∆VD

Operation

indeterminate

1.5V

V_DD

V_DL

V_DH

Figure 4. Description chart for Measuring the I/O Characteristics

Notes

: Output cannot be specified for power supply voltages under 1.5 V because operation is not guaranteed for that range.

: V_DL: Detection voltage for drop in power supply voltage

V_DH: Detection voltage for rise in power supply voltage

: These characteristics for the N-channel open drain output are when a load resistor is connected between the OUT and V_DDpins.

MN1380S Series

Microcomputer Peripheral LSIs

Application Circuit Example

Connect resistors, capacitors, and the like only to the output pin on the MN1380S series element. Note that connect-

ing them to the Power source pins changes V_DH, V_DL, and ∆VD.

Sample Circuit 1

Sample Circuit 2

OUT

MN1380S

Series

MN1380S

Series

Select the values of R and C to match the application.

Microcomputer Peripheral LSIs

MN1380S Series

Package Dimensions (Unit: mm)

MT-2 type package (Lead-free package)

6.9 0.1

4.0

2.5 0.1

(0.8)

0.7

0.65 max.

+0.10

0.45

–0.05

1.05 0.05

2.5 0.5

MN1380S Series

Microcomputer Peripheral LSIs

Package Dimensions (Unit: mm)(continued)

• SSIP003-P-0000S (Lead-free package)

4.00 0.20

5.00 0.20

0.60 0.15

0.40 0.10

2.30 0.20

0.40^+0.10

0.05

1.27

Microcomputer Peripheral LSIs

MN1380S Series

Package Dimensions (Unit: mm)(continued)

• MINI-3DC (Lead-free package)

(1.45)

0.40^+0.10

0.05

0.95

1.90+0.20

2.90^+0.20

0.05

Seating plane

0.10 to 0.30

0.40 0.20

MN1380S Series

Microcomputer Peripheral LSIs

Reference Characteristics

The following characteristics curves represent results from a specific sample therefore they do not guarantee the

characteristics for the final product.

1.4

1.2

1.0

0.8

0.6

V_SS

OUT

V_DD

0.4

0.2

1.0

2.0

5.0

7.0

3.0

4.0

6.0

(V)

Figure 5.b. Measurement Circuit

Figure 5.a. I_DDvs. V_DDCharacteristic (Rank Q)

2.0

1.5

V_SS

OUT

V_DD

1.0

0.5

–40

Ambient temperature, Ta (˚C)

–20

Figure 6.b. Measurement Circuit

Figure 6.a. I_DDTemperature Characteristic (Rank Q)

Microcomputer Peripheral LSIs

MN1380S Series

Reference Characteristics (continued)

4.8

4.6

4.4

V_SS

OUT

4.2

V_DH

V_DD

4.0

V_DL

3.8

3.6

3.4

60 80

–40 –20

Temperature Ta(˚C)

Figure 7.a. V_DL/V_DHTemperature Characteristic (Rank Q)

Figure 7.b. Measurement Circuit

0.3

0.25

0.2

V_SS

OUT

V_DD

0.15

0.1

0.05

–40 –20

40 60

Ambient temperature, Ta (˚C)

Figure 8.a. ∆VD Temperature Characteristic (Rank Q)

Figure 8.b. Measurement Circuit

MN1380S Series

Microcomputer Peripheral LSIs

Reference Characteristics (continued)

–30˚C

Room temperature

80˚C

V_SS

OUT

V_DD

1.8V

1.0

1.5

2.0

3.0

0.5

2.5

V_OL(V)

Figure 9.a. I_OLvs. V_OLCharacteristic

Figure 9.b. Measurement Circuit

–30˚C

Room temperature

V_SS

OUT

80˚C

V_DD

_OL(V)

Figure 10.a. I_OHvs. V_OHCharacteristic

Figure 10.b. Measurement Circuit

Microcomputer Peripheral LSIs

MN1380S Series

Reference Characteristics (continued)

2.5

2.0

1.5

1.0

0.5

V_SS

OUT

V_DD

1.8V

–20

–40

Ambient temperature, Ta (˚C)

Figure 11.a. I_OLvs. Temperature Characteristic

Figure 11.b. Measurement Circuit

7.0

6.5

6.0

5.5

5.0

V_SS

OUT

V_DD

4.5

–40

–20

Ambient temperature, Ta (˚C)

Figure 12.b. Measurement Circuit

Figure 12.a. I_OHvs. Temperature Characteristic

MN1380S Series

Microcomputer Peripheral LSIs

TO-92 Type Package Taping-Specifications (MN1381S/MN13811S/MN13812S)

∆h

F1 F2

øD0

Drawing direction

Figure 13. TO-92 Type Package Taping-Dimensions (Ammunition pack)

TO-92 Type Package Taping Dimensions (Ammunition pack)

Name

Symbol

Length (mm)

Name

Symbol

Length (mm)

6.0 0.5

Product height*

5.3 max

Adhesive tape width

Feed hole position

Adhesive tape position

Distance to top of product

Product width*

Product thickness*

Lead width*

5.2 max

4.2 max

9.0 0.5

0.5 max

+0.15

– 0.1

0.45

25.0 max

Taped lead length

Product pitch

2.0 max

12.7 1.0

12.7 0.3

Distance to

19.0 0.5

bottom of product

Feed hole pitch

Feed hole position

Lead spacing

Lead clinch height

Feed hole diameter

Tape thickness

16.0 0.5

4.0 0.2

0.7 0.2

1.5 max

6.35 0.5

+0.5

– 0.2

F1, F2

∆h1, ∆h2

2.5

Product deflection angle

Tape width

2.0 max

Total tape thickness

+1.0

– 0.5

18.0

Note* : For further details, see the specifications issued separately.

25 elements (example)

Leave the space for at

least three elements

330

250

Unit: mm

Figure 14. Box Dimensions for TO-92 Type Packages with Ammunition pack

Microcomputer Peripheral LSIs

MN1380S Series

Embossed Taping Specifications for Mini Type Package (MN1382S/MN13821S/MN13822S)

Tape feed hole

Drawing

direction

(Marking surface on top)

Figure 15. TX Orientation

Unit: mm

4.0 0.1

t+0.3 0.1

3.2 0.1

Product orientation A is labeled TW; orientation B, TX.

Figure 16. Embossed Taping Dimensions for Mini Type Package

Unit: mm

ø21 0.8

2 0.5

10 1.5

3,000 packages per reel

Figure 17. Embossed Taping Reel Dimensions for Mini Type Package

MN1380S Series

Microcomputer Peripheral LSIs

Reliability Testing Results for MN1380S Series

(1) MT-2 type package (MN1383/MN13831/MN13832) and TO-92 type package (MN1381S/MN13811S/MN13812S)

Test Subjects

Operating lifetime test

High-temperature storage test

Low-temperature storage test

High-temperature,

Test Conditions

V_DD=5.5V, Ta=125˚C, t=1000hrs

Ta=150˚C, t=1000hrs

Results

0/15

Ta=–65˚C, t=1000hrs

0/15

Ta=85˚C, RH=85%, t=1000hrs

0/15

high-humidity storage test

High-temperature,

_DD=5.5V, Ta=85˚C, RH=85%, t=1000hrs

0/15

high-humidity bias test

Thermal shock test

Ta=150˚C and –65˚C.

Five minutes at each temperature for ten cycles

Ta=150˚C and –65˚C.

Temperature cycle test

Thirty minutes at each temperature for ten cycles

Two atmospheres for 50 hours at ambient temperature (Ta) of 121˚C

Ambient temperature (Ta) of 230˚C for five seconds

Ambient temperature (Ta) of 270˚C for ten seconds

Pressure cooker test

Soldering test

0/15

Solder heat resistance test

(2) Mini type package (MN1382S/MN13821S/MN13822S)

Test Subjects

Test Conditions

Results

0/15

Operating lifetime test

High-temperature storage test

Low-temperature storage test

High-temperature,

V_DD=5.5V, Ta=125˚C, t=1000hrs

Ta=150˚C, t=1000hrs

0/15

Ta=–65˚C, t=1000hrs

0/15

Ta=85˚C, RH=85%, t=1000hrs

0/15

high-humidity storage test

High-temperature,

_DD=5.5V, Ta=85˚C, RH=85%, t=1000hrs

0/15

high-humidity bias test

Thermal shock test

Ta=150˚C and –65˚C.

Five minutes at each temperature for ten cycles

Ta=150˚C and –65˚C.

Temperature cycle test

Thirty minutes at each temperature for ten cycles

Two atmospheres for 24 hours at ambient temperature (Ta) of 121˚C

Ambient temperature (Ta) of 230˚C for five seconds

Ambient temperature (Ta) of 260˚C for five seconds

Pressure cooker test *

Soldering test

0/15

Solder heat resistance test *

Note* : Note that the testing conditions for the mini package differ from those for the other two packages.

Request for your special attention and precautions in using the technical information and

semiconductors described in this book

(1) If any of the products or technical information described in this book is to be exported or provided to non-residents, the laws and

regulations of the exporting country, especially, those with regard to security export control, must be observed.

(2) The technical information described in this book is intended only to show the main characteristics and application circuit examples

of the products, and no license is granted under any intellectual property right or other right owned by our company or any other

company. Therefore, no responsibility is assumed by our company as to the infringement upon any such right owned by any other

company which may arise as a result of the use of technical information described in this book.

(3) The products described in this book are intended to be used for standard applications or general electronic equipment (such as office

equipment, communications equipment, measuring instruments and household appliances).

Consult our sales staff in advance for information on the following applications:

– Special applications (such as for airplanes, aerospace, automobiles, traffic control equipment, combustion equipment, life support

systems and safety devices) in which exceptional quality and reliability are required, or if the failure or malfunction of the prod-

ucts may directly jeopardize life or harm the human body.

– Any applications other than the standard applications intended.

(4) The products and product specifications described in this book are subject to change without notice for modification and/or im-

provement. At the final stage of your design, purchasing, or use of the products, therefore, ask for the most up-to-date Product

Standards in advance to make sure that the latest specifications satisfy your requirements.

(5) When designing your equipment, comply with the range of absolute maximum rating and the guaranteed operating conditions

(operating power supply voltage and operating environment etc.). Especially, please be careful not to exceed the range of absolute

maximum rating on the transient state, such as power-on, power-off and mode-switching. Otherwise, we will not be liable for any

defect which may arise later in your equipment.

Even when the products are used within the guaranteed values, take into the consideration of incidence of break down and failure

mode, possible to occur to semiconductor products. Measures on the systems such as redundant design, arresting the spread of fire

or preventing glitch are recommended in order to prevent physical injury, fire, social damages, for example, by using the products.

(6) Comply with the instructions for use in order to prevent breakdown and characteristics change due to external factors (ESD, EOS,

thermal stress and mechanical stress) at the time of handling, mounting or at customer's process. When using products for which

damp-proof packing is required, satisfy the conditions, such as shelf life and the elapsed time since first opening the packages.

(7) This book may be not reprinted or reproduced whether wholly or partially, without the prior written permission of Matsushita

Electric Industrial Co., Ltd.

MN13822S-T(TX) [PANASONIC]

相关型号：

MN13822S-U(TX)

MN1382S

MN1382S-C(TX)

MN1382S-D(TX)

MN1382S-E(TX)

MN1382S-F(TX)

MN1382S-G(TX)

MN1382S-H(TX)

MN1382S-K(TX)

MN1382S-L(TX)

MN1382S-M(TX)

MN1382S-N(TX)