NH0110 [PANASONIC]

Circuit Protector Elements;
NH0110
型号: NH0110
厂家: PANASONIC    PANASONIC
描述:

Circuit Protector Elements

文件: 总2页 (文件大小:38K)
中文:  中文翻译
下载:  下载PDF数据表文档文件
Circuit Protector Elements  
UNH0110 (UN11010)  
Circuit Protector Elements  
Unit: mm  
2.5±0.1  
For overcurrent protection  
6.9±0.1  
(1.0)  
(1.5)  
(1.5)  
Features  
R 0.9  
Sharp cutoff characteristics and low voltage drop  
Flame retardant package and low heat generation.  
The package is molded with high dimensional accuracy.  
R 0.7  
(0.85)  
Absolute Maximum Ratings Ta = 25°C  
0.45±0.05  
0.55±0.1  
Parameter  
Symbol  
Topr  
Rating  
Unit  
°C  
Operating ambient temperature  
Storage temperature  
55 to +125  
55 to +125  
Tstg  
°C  
1
2
3
1: For use  
2: N.C.  
(5.0)  
3: For use  
M-B1 Package  
Electrical Characteristics Ta = 25°C ± 3°C  
100  
Parameter  
Rated voltage  
Min  
Typ  
50  
Max  
Unit  
V
A
10  
1
Rated current  
1.0  
56  
Internal resistance  
Cutoff current  
42  
70  
mΩ  
Refer to the diagram  
9
Standard temperature rise  
°C  
0.1  
0.01  
0.1  
1
10  
100  
Usage Notes  
Cutoff current (A)  
Package shall be overheated and dangerous for overcurrent.  
This device should be used only to the secondary circuit.  
Package will be damaged for added overpower.  
This device is not electrical fuse legally. Please draw a clear line between electrical fuse from this device.  
Note) The part number in the parenthesis shows conventional part number.  
Publication date: June 2002  
SQB00018AED  
1
Request for your special attention and precautions in using the technical information  
and semiconductors described in this book  
(1) An export permit needs to be obtained from the competent authorities of the Japanese Govern-  
ment if any of the products or technologies described in this book and controlled under the "Foreign  
Exchange and Foreign Trade Law" is to be exported or taken out of Japan.  
(2) The technical information described in this book is limited to showing representative characteristics  
and applied circuits examples of the products. It neither warrants non-infringement of intellectual  
property right or any other rights owned by our company or a third party, nor grants any license.  
(3) We are not liable for the infringement of rights owned by a third party arising out of the use of the  
product or technologies as described in this book.  
(4) The products described in this book are intended to be used for standard applications or general  
electronic equipment (such as office equipment, communications equipment, measuring instru-  
ments and household appliances).  
Consult our sales staff in advance for information on the following applications:  
Special applications (such as for airplanes, aerospace, automobiles, traffic control equipment,  
combustion equipment, life support systems and safety devices) in which exceptional quality and  
reliability are required, or if the failure or malfunction of the products may directly jeopardize life or  
harm the human body.  
Any applications other than the standard applications intended.  
(5) The products and product specifications described in this book are subject to change without no-  
tice for modification and/or improvement. At the final stage of your design, purchasing, or use of the  
products, therefore, ask for the most up-to-date Product Standards in advance to make sure that  
the latest specifications satisfy your requirements.  
(6) When designing your equipment, comply with the guaranteed values, in particular those of maximum  
rating, the range of operating power supply voltage, and heat radiation characteristics. Otherwise,  
we will not be liable for any defect which may arise later in your equipment.  
Even when the products are used within the guaranteed values, take into the consideration of  
incidence of break down and failure mode, possible to occur to semiconductor products. Measures  
on the systems such as redundant design, arresting the spread of fire or preventing glitch are  
recommended in order to prevent physical injury, fire, social damages, for example, by using the  
products.  
(7) When using products for which damp-proof packing is required, observe the conditions (including  
shelf life and amount of time let standing of unsealed items) agreed upon when specification sheets  
are individually exchanged.  
(8) This book may be not reprinted or reproduced whether wholly or partially, without the prior written  
permission of Matsushita Electric Industrial Co., Ltd.  
2002 MAY  

相关型号:

NH020

Power SIPs 5 Vdc Input; 1.5 Vdc to 3.3 Vdc Output; 20 W
LINEAGEPOWER

NH020F

Power SIPs 5 Vdc Input; 1.5 Vdc to 3.3 Vdc Output; 20 W
LINEAGEPOWER

NH020F2

Analog IC
ETC

NH020FZ

Power SIPs 5 Vdc Input; 1.5 Vdc to 3.3 Vdc Output; 20 W
LINEAGEPOWER

NH020G

Power SIPs 5 Vdc Input; 1.5 Vdc to 3.3 Vdc Output; 20 W
LINEAGEPOWER

NH020GZ

Power SIPs 5 Vdc Input; 1.5 Vdc to 3.3 Vdc Output; 20 W
LINEAGEPOWER

NH020M

Power SIPs 5 Vdc Input; 1.5 Vdc to 3.3 Vdc Output; 20 W
LINEAGEPOWER

NH020M2

Analog IC
ETC

NH020Y

Power SIPs 5 Vdc Input; 1.5 Vdc to 3.3 Vdc Output; 20 W
LINEAGEPOWER

NH020Y2Z

Power SIPs 5 Vdc Input; 1.5 Vdc to 3.3 Vdc Output; 20 W
LINEAGEPOWER

NH025

Wirewound Resistors, Military, MIL-PRF-18546 Qualified, Type RE, Aluminum Housed, Chassis Mount
VISHAY

NH025100R0AE02

RESISTOR, WIRE WOUND, 25 W, 0.05 %, 20 ppm, 100 ohm, CHASSIS MOUNT, GREEN
VISHAY