PAN1321 [PANASONIC]
A Comprehensive Guide to Choosing the Right RF Module;
| 型号： | PAN1321 |
| 厂家： | 
PANASONIC |
| 描述： | A Comprehensive Guide to Choosing the Right RF Module |
| 文件： | 总4页 (文件大小：2047K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
RF Modules
At-A-Glance Selection Guide
A Comprehensive Guide to Choosing the Right RF Module
Panasonic Electronic Components provides powerful, highly flexible,
cost effective RF Modules for a wide variety of wireless Personal
Area Network (PAN) applications. New extended range products and
small footprints combined with network firmware flexibility make
Panasonic an industry leader in the development of cutting edge
RF Module technology with over 100 different module choices!
1-800-344-2112
www.panasonic.com/rfmodules
Bluetooth® Classic
Bluetooth Classic, formerly known as Bluetooth and Bluetooth EDR, is a networking standard designed to meet IEEE 802.15.1 and
administered by the Bluetooth Special Interest Group (BT SIG). Conceived as a 2.4GHz wireless standard to replace wired headsets
in 1999, Bluetooth has grown in both scope and capability. By far it is the most prolific wireless standard today adding over 1,000,000
nodes to the network every day, in cell phones, PC’s, consumer and medical electronics applications and many more. Bluetooth Classic
is best suited to high data rate – up to 3Mbits/sec – applications where the network size is under eight nodes. Larger networks can be
formed with Scatternets. Connections are robust, even in noisy environments, by using 80 channels, each 1MHz wide, adaptive
frequency hopping, and multiple modulation schemes. Range can be adjusted using hardware and software from under a meter to over
two hundred meters. Panasonic offers four Series of Bluetooth devices with over 20 parts numbers to address nearly every application.
Bluetooth Dual Mode
Panasonic Dual Mode RF Modules require only 85.5 mm2, including antenna, of board area; 80% less than any multi-module or device
design; all while reducing costs associated with incorporating two wireless technologies. These modules have been designed to be
100% pin compatible with other members of the PAN13xx family. This unique design feature enables designers to seamlessly
transition between Bluetooth Classic, Low Energy and ANT™ enabled modules, addressing larger markets and providing migration
paths to circumvent obsolescence.
Bluetooth ANT™
ANT™ is a wireless sensor network protocol operating in the 2.4 GHz spectrum. Designed for ultra-low power, ease of use, efficiency
and scalability, ANT supports peer-to-peer, star, tree and fixed mesh topologies. It provides reliable data communications, flexible and
adaptive network operation and cross-talk immunity. The ANT protocol stack is compact, requiring minimal microcontroller resources
to reduce system costs, lighten the computational burden and improve efficiency. Low-level security is implemented to allow
user-defined network security.
Bluetooth Low Energy
Bluetooth Low Energy is designed to reduce power consumption. It can be put into a sleep mode and only activates for event
activities such as sending data to a gateway, PC or mobile phone. Furthermore, the maximum power consumption is less than 15 mA
and the average power consumption is about 1 uA. The foundations of low energy consumption are short messages and establishing
very fast connections (few ms). Using these techniques, energy consumption is reduced to a tenth of a Classic Bluetooth unit. Thus, a
small coin cell – such as a CR2032 – is capable of powering a device for up to 10 years of operation.
Dual Mode
Low
Category
Classic
+ Low
Energy
+ ANT™
Energy
Apple®
Device
Apple®
Device
Compatible!
Compatible!
Module Image
Series
PAN1315A/1325A
PAN1311/1321
(no/with antenna)
PAN1321i
(with antenna)
PAN1455/1555
PAN1316/1326
PAN1317/1327
PAN1720
(no/with antenna)
Ver 3.0 EDR -
SPP, HID, HDP
(no/with antenna)
Ver 2.1 EDR - HCI
(no/with antenna)
Ver 4.0 EDR - HCI
(no/with antenna)
Ver 2.1 EDR - HCI
(with antenna)
Ver 4.0 EDR BLE
Function
Ver 2.0 EDR - SPP Ver 2.0 EDR - SPP
9.0 x 6.5 x 1.7
9.0 x 9.5 x 1.7
11.6 x 8.7 x 1.8
15.6 x 8.7 x 2.8
15.6 x 8.7 x 2.8
9.0 x 6.5 x 1.7
9.0 x 9.5 x 1.7
9.0 x 6.5 x 1.7
9.0 x 9.5 x 1.7
18.8 x 13.5 x 2.5
15.6 x 8.7 x 1.8
Size [mm]
CC2560A
PMB8753/2
-86 @ BER 10
+4 dBm
PMB8753/2
-86 @ BER 10
+4 dBm
BC6 / STM32F103
CC2564
CC2567
CC2540 / (41)
-94 @ BER 1%
+3 dBm
IC
-3
-3
-3
-3
-3
-3
Rx Sensitivity [dBm]
Tx Power (max.)
Operating Temp.
Power Supply
-93 @ BER 10
-86 @ BER 10
-93 @ BER 10
-93 @ BER 10
+10.5 dBm
-20 to +70 °C
1.8 to 4.8 V
+4 dBm
+10.5 dBm
-20 to +70 °C
1.8 to 4.8 V
+10.5 dBm
-20 to +70 °C
1.8 to 4.8 V
-40 to +85 °C
2.7 to 3.6 V
-40 to +85 °C
2.7 to 3.6 V
-40 to +85 °C
2.7 to 3.6 V
-40 to +85 °C
2.0 to 3.6 V
135 µA (sleep)
40 mA (Tx,EDR)
80 µA (sleep)
40 mA (Tx,EDR)
80 µA (sleep)
40 mA (Tx,EDR)
<100 µA (sleep)
47 mA (ACL; DH1)
135 µA (sleep)
40 mA (Tx,EDR)
135 µA (sleep)
40 mA (Tx,EDR)
>1µA (sleep)
Tx23mA @ -6dBm
Current Consum.
2.4 GHz
2
2.4 GHz
>15
2.4 GHz
>15
2.4 GHz
18
2.4 GHz
2
2.4 GHz
2
2.4 GHz
19
Frequency Range
Number of GPIOs
GPIO, UART,
JTAG
GPIO, UART,
JTAG
GPIO, UART, I²C,
SPI, ADC
GPIO, UART
(USB)
GPIO, PCM, UART
3 MBit/s
GPIO, PCM, UART
3 MBit/s
GPIO, PCM, UART
3 MBit/s
Interfaces
Data Rate
(max. air)
3 MBit/s
190 kBit/s
3 MBit/s
ca. 500 kBit/s
1 MBit/s
EVAL_PAN1323
EVAL_PAN1321i
EVAL_PAN1321iETU
EVAL_PAN1555
EVAL_PAN1323
EVAL_PAN1323ETU
EVAL_PAN1720
Dev Kit
EVAL_PAN1323ETU
Dev Module
Apple, iPod, iPhone and iPad are registered trademarks of Apple Inc.
The Bluetooth® word mark and logos are registered tandemarks owned by Bluetooth SIG, Inc and any use of such marks by Panasonic Corporation of North America is under license. Other trademarks and
trade names are those of their respective owners.
Mesh
Networking
Category
Mesh Networking
Based on the IEEE 802.15.4 standard,
Mesh Networking was developed for
the purpose of sending small amounts
of data short distances, using very
little power. The key feature of
Module Image
Series
PAN4580
PAN4555
PAN4561 H/M/L
AT Command Set
& Mesh Software
AT Command Set
& Mesh Software
AT Command Set
& Mesh Software
Function
this technology is the ability to create
a self healing mesh network where
nodes “talk” to each other in a way
that gets a message to a desired
end point using the best path. When
not in use, nodes will “sleep” using
extremely little power.
Size [mm]
29.0 x 19.0 x 2.9
ATmega128RFA1
-100 @ 250kBit/s
3.5 dBm
16.4 x 12.2 x 2.2
MC1321x
-92
35.0 x 15.0 x 3.8
MC1321x/CC259x
+18.5/0/0
IC
Rx Sensitivity [dBm]
Tx Power (max.)
Operating Temp.
Power Supply
0 dBm
-102/-102/-92dBm
-40 to +85 °C
2.0 to 3.4 V
-40 to +85 °C
1.8 to 3.6 V
-40 to +85 °C
2.0 to 3.4 V
Tx: 18.5 mA @0dBm
Rx: 16.5mA
Sleep Mode: <1µA
<1 / 2 µA (off mode)
30 / 210 mA
(Tx, -4 / +20 dBm)
Current
Consumption
<1µA (off mode)
30 mA (Tx, -4dBm)
Frequency Range
Number of GPIOs
2.4 GHz
33
2.4 GHz
19
2.4 GHz
33
GPIO, 2 UART, SPI,
ADC, 2 wire serial
GPIO, UART,
SPI
GPIO, UART,
I²C, BDM
Interfaces
Data Rate (max. air)
Dev Kit
2000 kBit/s
250 kBit/s
250 kBit/s
EVAL_PAN4555
EVAL_PAN4555ETU
EVAL_PAN4561
EVAL_PAN4561ETU
Dev Module
ISM
ISM
Category
(Market for Industrial-Scientific-Medical Solutions)
Industrial, Scientific and Medical (ISM
radio band). Key benefits are reduced
cost, proprietary network, low power and
various speeds of data transmission. Many
ISM Modules work outside of the crowded
2.4 Ghz spectrum to provide high RF
performance and data integrity.
Module Image
Series
PAN2580
PAN235x
PAN2365
wireless M-Bus
& Mesh Software
<1GHz Transcei-
ver Module
2.4GHz Transcei-
ver Module
Function
Size [mm]
29.0 x 19.0 x 2.9
SiLabs SI100x
-118 @ 2.0kBit/s
+13 / +18 dBm
-40 to +85 °C
8.0 x 8.2 x 1.9
CC1101
8.0 x 8.2 x 1.9
CC2500
Contact us today!
IC
Rx Sensitivity [dBm]
Tx Power (max.)
Operating Temp.
Power Supply
-104 @ 2.4kBit/s
+10 dBm
-104 @ 2.4kBit/s
0 dBm
1-800-344-2112
-40 to +85 °C
1.8 to 3.6 V
-40 to +85 °C
1.8 to 3.6 V
Visit www.panasonic.com/rfmodules
for RF Module Website Resources:
1.8 (2.7) to 3.6 V
Tx: 30/85 mA
Rx: 18.5mA
Sleep Mode: <1µA
Current
Consumption
<1µA (sleep)
17mA (Tx, 0dBm)
<1µA (sleep)
21mA (Tx, 0dBm)
•ꢀ Design Guides
•ꢀ Reference Guides
•ꢀ Schematics
Frequency Range
Number of GPIOs
863 to 928 MHz
18
300 to 1000 MHz
2 Output
2.4 GHz
2 Output
GPIO, UART,
SPI, I²C, ADC
•ꢀ PCB Layouts
Interfaces
GPO, SPI
500 kBit/s
GPO, SPI
500 kBit/s
•ꢀ Development Software
•ꢀ Specifications
•ꢀ Applications Notes
•ꢀ Video FAQ’s
Data Rate (max. air)
500 kBit/s
NEW! PAN1323ETU BLUETOOTH®
PAN1323ETU Triple Mode Compatibility
Development Module
One development module,
Series
Antenna Bluetooth LE ANT Compatibility
three standards: Bluetooth
Classic, Bluetooth Low
X
X
X
X
X
X
X
X
X
-
PAN1323ETU
PAN1315A
PAN1315
PAN1316
PAN1317
PAN1325A
PAN1325
PAN1326
PAN1327
Energy and ANT™.This
unique triple mode ETU
100%
– that’s ETU for “Easy-
X
To-Use” – module plugs
X
X
directly into Panasonic
X
Development Kits, Texas
Instruments MSP430 and Stellaris experimenter
boards with the added benefit of header connectors
that simplify prototype wiring and field trials.
X
X
X
X
X
X
100%
X
To learn more, please visit:
http://www.panasonic.com/industrial/electronic-components/rf-modules/bluetooth/pan1323etu.aspx
Make Your Product
Powered by Panasonic
Providing cutting edge technology to give your
product the performance, reliability and
quality that today’s consumers demand.
■
■
■
■
■
■
Capacitors
Resistors
Inductors and Filters
Circuit Protection
Electromechanical
RF Modules
Panasonic Industrial Devices Sales Company of America
Panasonic Electronic Components
3 Panasonic Way • Secaucus, NJ 07094
1-800-344-2112 • www.panasonic.com/industrial/electronic-components
www.panasonic.com/industrial/electronic-components
industrial@us.panasonic.com
1-800-344-2112
Copyright © 2012 Panasonic Corporation of North America.
All Rights Reserved. Specifications are subject to change without notice.
RF MODULE At-A-Glance Selection Guide, FY11-086-3000
相关型号：
©2020 ICPDF网 联系我们和版权申明