PM-L45-P [PANASONIC]
U-shaped Micro Photoelectric Sensor;型号: | PM-L45-P |
厂家: | PANASONIC |
描述: | U-shaped Micro Photoelectric Sensor 传感器 换能器 |
文件: | 总16页 (文件大小:999K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Recognition
Certified
(Some models only)
PNP output
type available
Three protection circuits standard on all models Industry’s first*! IP64 rating
*As of April 2017, in-company survey.
PM-25/45/65 SERIES
PM-25/45 SERIES
All models are standardly equipped with the following
protection circuits in their compact bodies. These
protection circuits minimize the possibility of sensor
malfunctions caused by erroneous wiring.
Our original integrated molding method has eliminated
grooves and gaps on the sensing surface and main
body, thus reducing the possibility of malfunctions
caused by splashing water or dust.
1
2
3
Reverse supply polarity protection circuit
Reverse output polarity protection circuit
Output short-circuit protection circuit
Ample beam emitting / receiving distance of
PM-25/45/65 SERIES
6 mm 0.236 in
No ridges on
sensing surface
The beam emitting and receiving sections are 0.5 mm
0.02 in thinner than those on our conventional models
while their external dimensions are the same. As a
result, the distance between the beam emitting point and
receiving point increased by 1 mm 0.039 in. The wider
distance means less possibility of collision between the
sensing section and sensing object.
No joint seam
Beam marks for easy adjustment
PM-25/45/65 SERIES
13.4 0.528
The upper-limit and lower-limit positions of beam can
be visually confirmed from the front, back, right and left
sides of the sensor unit. This allows easy adjustment of
the position of sensing object.
6 0.236
3.7 0.146
Upper-limit position
Beam width
of beam axis
Beam width marks are provided on
PM25 series and PM45 series.
Lower-limit position
of beam axis
(Unit: mm in)
< Front / back >
< Right / left >
U-shaped Micro Photoelectric Sensor PM-25SERIES PM-45SERIES PM-65SERIES
396
APPLICATIONS
FIBER
SENSORS
LASER
Positioning of a pallet
Sensing the starting point and overrun
Sensing the starting point on a
rotating body
SENSORS
of a moving body
PHOTO-
Overrun sensing
ELECTRIC
SENSORS
Starting
point
Dog
MICRO
The starting
point can be
sensed by
making a slit in
the rotating
body.
PHOTO-
ELECTRIC
SENSORS
AREA
SENSORS
Starting point sensing
SAFETY LIGHT
CURTAINS
SAFETY
/
Overrun
sensing
COMPONENTS
PRESSURE /
FLOW
SENSORS
Starting point and overrun is
sensed using the dog* on the base.
INDUCTIVE
PROXIMITY
SENSORS
Pallet is stopped by sensing the dog*.
*“Dog” refers to the sensing object for activating the sensor’s detecting operation.
PARTICULAR
USE
SENSORS
SENSOR
OPTIONS
Large and easy to see
VARIATION
PM-25/45/65 SERIES
SIMPLE
Multi-angle operation indicator
WIRE-SAVING
UNITS
Sensors come in various shapes to suit a wide range of
mounting conditions
The large operation indicator (orange) lights up when the
beam enters. The indicator is easy to see from above and
from the sides.
WIRE-SAVING
SYSTEMS
PM-25 SERIES
Ultra-small / Cable type
MEASURE-
MENT
SENSORS
Easy mounting with M2/M3 screws!
PM-45 SERIES
Compact size
STATIC
CONTROL
DEVICES
1 m 3.281 ft bending-
resistant cable
1 m 3.281 ft cable 3 m 9.843 ft cable
NPN output
All new models require significantly less mounting space
than our conventional models when mounted with the same
pitch. What’s more, the new models can directly replace our
conventional models currently in use.
LASER
3 m 9.843 ft
cable
1 m 3.281 ft bending-
resistant cable
MARKERS
1 m 3.281 ft cable
PNP output
PLC
PM-45 SERIES
Compact / Cable type
HUMAN
MACHINE
INTERFACES
PM-L45
Conventional
model
Compact size!
ENERGY
(L type)
MANAGEMENT
SOLUTIONS
1 m 3.281 ft bending-
resistant cable
1 m 3.281 ft cable 3 m 9.843 ft cable
NPN output
15.5 0.610
14.6 0.575
FA
1 m 3.281 ft bending-
resistant cable
1 m 3.281 ft cable 3 m 9.843 ft cable
COMPONENTS
PNP output
26 1.024
10
0.394
18.5 0.728
(Unit: mm in)
26 1.024
MACHINE
VISION
SYSTEMS
PM-65 SERIES
Compact / Connector built-in type
UV
CURING
SYSTEMS
Easy connection with a single touch using commercially-
available connectors
All models easy to
mount with M3 screws
PM-25/45/65 SERIES
Connector attached cable
1 m 3.281 ft, 2 m 6.562 ft,
3 m 9.843 ft, 5 m 16.404 ft
Connector attached bending-resistant cable
1 m 3.281 ft, 2 m 6.562 ft,
NPN output
PNP output
3 m 9.843 ft, 5 m 16.404 ft
The sensor unit can be installed with one or two M3 screws.
* M3 screws and washers are not included.
Connector attached cable
1 m 3.281 ft, 2 m 6.562 ft,
3 m 9.843 ft, 5 m 16.404 ft
Connector attached bending-resistant cable
1 m 3.281 ft, 2 m 6.562 ft,
3 m 9.843 ft, 5 m 16.404 ft
Selection
Guide
■ Models requiring one M3 screw for installation
PM-F25, PM-R25, PM-F65, PM-R65
■ Models requiring two M3 screws for installation
Models other than above
U-shaped
Convergent
Reflective
PM-25/PM-45/
PM-65
Resistant to vibrations
PM-25/45/65 SERIES
and impacts
The sections where stress concentrates, such as the
connecting section of the cable and internal circuit, are
covered with a resin. This helps prevent malfunctions
caused by vibrations and impacts.
Resin-filled structure
(cross-sectional view)
Recognition
ORDER GUIDE
Type
Appearance (mm in)
Sensing range
Model No.
Cable length
Output
Output operation
1 m 3.281 ft
1 m 3.281 ft,
PM-K25
NPN open-collector
PM-K25-R
PM-K25-C3
PM-K25-P
PM-L25
bending-resistant cable transistor
6 0.236
23.9
12.3
3 m 9.843 ft
0.941
0.484
PNP open-collector
transistor
1 m 3.281 ft
1 m 3.281 ft
1 m 3.281 ft,
bending-resistant cable transistor
NPN open-collector
PM-L25-R
PM-L25-C3
PM-L25-P
PM-U25
12 0.472
3 m 9.843 ft
12
13.4
0.472
0.528
PNP open-collector
transistor
1 m 3.281 ft
1 m 3.281 ft
1 m 3.281 ft,
bending-resistant cable transistor
NPN open-collector
PM-U25-R
PM-U25-C3
PM-U25-P
PM-F25
6 0.236
6 mm 0.236 in
(fixed)
Incorporated with 2 outputs:
Light-ON/Dark-ON
16
13.4
3 m 9.843 ft
0.630
0.528
PNP open-collector
transistor
1 m 3.281 ft
1 m 3.281 ft
11.7 0.461
1 m 3.281 ft,
bending-resistant cable transistor
NPN open-collector
PM-F25-R
PM-F25-C3
PM-F25-P
PM-R25
12.5
3 m 9.843 ft
13.4
0.492
0.528
PNP open-collector
transistor
1 m 3.281 ft
1 m 3.281 ft
11.7 0.461
1 m 3.281 ft,
bending-resistant cable transistor
NPN open-collector
PM-R25-R
PM-R25-C3
PM-R25-P
12.5
3 m 9.843 ft
13.4
0.492
0.528
PNP open-collector
transistor
1 m 3.281 ft
Note: The suffix “-R” in the model No. indicates a bending-resistant cable type. The suffix “-C3” indicates a 3 m 9.843 ft cable length type.
OPTIONS
Mounting screw
Designation
Model No.
Description
• MS-M2
Mounting screw with washers for the ultra-small type sensor
(50 pcs. lot). It can mount securely as it is spring washer attached.
Mounting screw
MS-M2
M2 (length 10 mm 0.394 in) screw
with a spring washer
U-shaped Micro Photoelectric Sensor PM-25SERIES PM-45SERIES PM-65SERIES
398
FIBER
SENSORS
SPECIFICATIONS
LASER
SENSORS
PHOTO-
ELECTRIC
SENSORS
Ultra-small / Cable type
Bending-resistant cable
PM-□25-R
Type
MICRO
3 m 9.843 ft cable
PM-□25-C3
PHOTO-
ELECTRIC
SENSORS
NPN output
PNP output
PM-□25
AREA
SENSORS
Item
PM-□25-P
SAFETY LIGHT
CE marking directive compliance
Sensing range
EMC Directive, RoHS Directive
6 mm 0.236 in (fixed)
CURTAINS
SAFETY
/
COMPONENTS
PRESSURE /
FLOW
Minimum sensing object
Hysteresis
0.8 × 1.2 mm 0.031 × 0.047 in opaque object
0.05 mm 0.002 in or less
SENSORS
INDUCTIVE
PROXIMITY
SENSORS
Repeatability
0.01 mm 0.0004 in or less
PARTICULAR
USE
Supply voltage
5 to 24 V DC ±10 % Ripple P-P 10 % or less
15 mA or less
SENSORS
Current consumption
SENSOR
OPTIONS
<PNP output type>
PNP open-collector transistor
• Maximum source current: 50 mA
<NPN output type>
NPN open-collector transistor
• Maximum sink current: 50 mA
SIMPLE
WIRE-SAVING
UNITS
Output
• Applied voltage: 30 V DC or less (between output and +V)
• Residual voltage: 2 V or less (at 50 mA source current)
1 V or less (at 16 mA source current)
• Applied voltage: 30 V DC or less (between output and 0 V)
• Residual voltage: 2 V or less (at 50 mA sink current)
1 V or less (at 16 mA sink current)
WIRE-SAVING
SYSTEMS
MEASURE-
MENT
SENSORS
Output operation
Incorporated with 2 outputs: Light-ON/Dark-ON
STATIC
CONTROL
DEVICES
Short-circuit protection
Incorporated
Under light received condition: 20 μs or less
Under light interrupted condition: 80 μs or less
(Maximum response frequency: 3 kHz) (Note 2)
LASER
MARKERS
Response time
PLC
Operation indicator
Pollution degree
Protection
Orange LED (lights up under light received condition)
HUMAN
3
MACHINE
INTERFACES
IP64 (IEC)
ENERGY
MANAGEMENT
SOLUTIONS
Ambient temperature
(Note 3, 4)
–25 to +55 °C –13 to +131 °F (No dew condensation or icing allowed), Storage: –30 to +80 °C –22 to +176 °F
FA
COMPONENTS
Ambient humidity
Ambient illuminance
Voltage withstandability
Insulation resistance
Vibration resistance
Shock resistance
Emitting element
5 to 85 % RH, Storage: 5 to 95 % RH
Fluorescent light: 1,000 ℓx or less at the light-receiving face
MACHINE
VISION
SYSTEMS
1,000 V AC for one min. between all supply terminals connected together and enclosure
20 MΩ, or more, with 250 V DC megger between all supply terminals connected together and enclosure
10 to 2,000 Hz frequency, 1.5 mm 0.059 in double amplitude (maximum acceleration 196 m/s2) in X, Y and Z directions for two hours each
15,000 m/s2 acceleration (1,500 G approx.) in X, Y and Z directions three times each
Infrared LED (Peak emission wavelength: 855 nm 0.034 mil, non-modulated)
Enclosure: PBT, Display section: Polycarbonate
UV
CURING
SYSTEMS
Selection
Guide
Material
U-shaped
0.09 mm2 4-core cabtyre cable, PVC,
0.1 mm2 4-core bending-resistant cabtyre
cable, PVC, 1 m 3.281 ft long (Note 5, 6)
0.09 mm2 4-core cabtyre cable, PVC,
3 m 9.843 ft long
Convergent
Cable
1 m 3.281 ft long
Reflective
Cable extension
Weight
Extension up to total 100 m 328.084 ft is possible with 0.3 mm2, or more, cable. (Note 7)
PM-25/PM-45/
PM-65
Net weight: 30 g approx.,
Net weight: 10 g approx., Gross weight: 15 g approx.
Gross weight: 35 g approx.
Notes: 1) Where measurement conditions have not been specified precisely, the conditions used were an ambient temperature of +23 °C +73.4 °F.
2) The response frequency is the value when the disc, given in the figure below, is rotated.
1.8 mm 0.071 in
Disc
Disc
t = 0.2 mm 0.008 in
1.6 mm 0.063 in
1.6 mm 0.063 in
3) In case the PM-25 series is used at an ambient temperature of +50 °C +122 °F, or more, make sure to mount it on a metal body.
4) Note that the cable of PM-□25-R loses its flexibility when the ambient temperature decreases to about -10 °C +14 F°.
5) The cable of PM-□25-R is a bending-resistant cable usable on a moving base. When the sensor is mounted on a moving base, secure the sensor cable
joint at the unit in place so that stress is not applied to it.
6) When storing PM-□25-R, make sure that the cable does not come into contact with the sensing section or operation indicator.
7) If the cable is extended to 20 m 65.617 ft or longer, confirm that the supply voltage at the end of the cable attached to the sensor is 4.5 V or higher.
*
Recognition
Certified
ORDER GUIDE
Type
Appearance (mm in)
Sensing range
Model No.
PM-K45
Cable length
Output
Output operation
1 m 3.281 ft
3 m 9.843 ft
1 m 3.281 ft
3 m 9.843 ft
1 m 3.281 ft
3 m 9.843 ft
1 m 3.281 ft
3 m 9.843 ft
1 m 3.281 ft
3 m 9.843 ft
1 m 3.281 ft
3 m 9.843 ft
1 m 3.281 ft
3 m 9.843 ft
1 m 3.281 ft
3 m 9.843 ft
1 m 3.281 ft
3 m 9.843 ft
1 m 3.281 ft
3 m 9.843 ft
1 m 3.281 ft
3 m 9.843 ft
1 m 3.281 ft
3 m 9.843 ft
NPN open-collector
transistor
7 0.276
PM-K45-C3
PM-K45-P
PM-K45-P-C3
PM-T45
25.4
21.3
PNP open-collector
transistor
1.000
0.839
NPN open-collector
transistor
PM-T45-C3
PM-T45-P
PM-T45-P-C3
PM-L45
13.7 0.539
18.1
PNP open-collector
transistor
26
0.713
1.024
NPN open-collector
transistor
PM-L45-C3
PM-L45-P
PM-L45-P-C3
PM-Y45
14.6 0.575
7 0.276
26
PNP open-collector
transistor
1.024
6 mm 0.236 in
(fixed)
Incorporated with 2 outputs:
Light-ON/Dark-ON
NPN open-collector
transistor
14.6 0.575
PM-Y45-C3
PM-Y45-P
PM-Y45-P-C3
PM-F45
20.6
13.4
PNP open-collector
transistor
0.811
0.528
NPN open-collector
transistor
PM-F45-C3
PM-F45-P
PM-F45-P-C3
PM-R45
13 0.512
21.3
13.7
PNP open-collector
transistor
0.839
0.539
NPN open-collector
transistor
13 0.512
PM-R45-C3
PM-R45-P
PM-R45-P-C3
13.7
21.3
PNP open-collector
transistor
0.539
0.839
Note: The suffix “-C3” in the model No. indicates a 3 m 9.843 ft cable length type.
U-shaped Micro Photoelectric Sensor PM-25SERIES PM-45SERIES PM-65SERIES
400
FIBER
SENSORS
SPECIFICATIONS
LASER
SENSORS
PHOTO-
ELECTRIC
SENSORS
Compact / Cable type
Type
MICRO
3 m 9.843 ft cable
PM- 45-C3
PHOTO-
ELECTRIC
SENSORS
NPN output
PNP output
PM- 45
□
□
AREA
SENSORS
Item
PM- 45-P
PM- 45-P-C3
□
□
SAFETY LIGHT
CE marking directive compliance
Sensing range
EMC Directive, RoHS Directive
6 mm 0.236 in (fixed)
CURTAINS
SAFETY
/
COMPONENTS
PRESSURE /
FLOW
Minimum sensing object
Hysteresis
0.8 × 1.2 mm 0.031 × 0.047 in opaque object
0.05 mm 0.002 in or less
SENSORS
INDUCTIVE
PROXIMITY
SENSORS
Repeatability
0.01 mm 0.0004 in or less
PARTICULAR
USE
Supply voltage
5 to 24 V DC ±10 % Ripple P-P 10 % or less
15 mA or less
SENSORS
Current consumption
SENSOR
OPTIONS
<NPN output type>
NPN open-collector transistor
• Maximum sink current: 50 mA
<PNP output type>
PNP open-collector transistor
• Maximum source current: 50 mA
SIMPLE
WIRE-SAVING
UNITS
Output
• Applied voltage: 30 V DC or less (between output and 0 V)
• Residual voltage: 2 V or less (at 50 mA sink current)
1 V or less (at 16 mA sink current)
• Applied voltage: 30 V DC or less (between output and +V)
• Residual voltage: 2 V or less (at 50 mA source current)
1 V or less (at 16 mA source current)
WIRE-SAVING
SYSTEMS
MEASURE-
MENT
SENSORS
Output operation
Incorporated with 2 outputs: Light-ON/Dark-ON
STATIC
Short-circuit protection
Incorporated
CONTROL
DEVICES
Under light received condition: 20 μs or less
Under light interrupted condition: 80 μs or less
(Maximum response frequency: 3 kHz) (Note 2)
LASER
Response time
MARKERS
PLC
Operation indicator
Pollution degree
Protection
Orange LED (lights up under light received condition)
3
HUMAN
MACHINE
INTERFACES
IP64 (IEC)
ENERGY
MANAGEMENT
SOLUTIONS
Ambient temperature
Ambient humidity
Ambient illuminance
Voltage withstandability
Insulation resistance
Vibration resistance
Shock resistance
Emitting element
Material
–25 to +55 °C –13 to +131 °F (No dew condensation or icing allowed), Storage: –30 to +80 °C –22 to +176 °F
5 to 85 % RH, Storage: 5 to 95 % RH
FA
COMPONENTS
Fluorescent light: 1,000 ℓx or less at the light-receiving face
MACHINE
VISION
1,000 V AC for one min. between all supply terminals connected together and enclosure
20 MΩ, or more, with 250 V DC megger between all supply terminals connected together and enclosure
10 to 2,000 Hz frequency, 1.5 mm 0.059 in double amplitude (maximum acceleration 196 m/s2) in X, Y and Z directions for two hours each
15,000 m/s2 acceleration (1,500 G approx.) in X, Y and Z directions three times each
Infrared LED (Peak emission wavelength: 855 nm 0.034 mil, non-modulated)
Enclosure: PBT, Display section: Polycarbonate
SYSTEMS
UV
CURING
SYSTEMS
Selection
Guide
Cable
0.09 mm2 4-core cabtyre cable, PVC, 1 m 3.281 ft long
0.09 mm2 4-core cabtyre cable, PVC, 3 m 9.843 ft long
U-shaped
Convergent
Cable extension
Weight
Extension up to total 100 m 328.084 ft is possible with 0.3 mm2, or more, cable. (Note 3)
Reflective
Net weight: 10 g approx., Gross weight: 15 g approx.
Net weight: 30 g approx., Gross weight: 35 g approx.
PM-25/PM-45/
PM-65
Notes: 1)Where measurement conditions have not been specified precisely, the conditions used were an ambient temperature of +23 °C +73.4 °F.
2)The response frequency is the value when the disc, given in the figure below, is rotated.
1.8 mm 0.071 in
Disc
Disc
t = 0.2 mm 0.008 in
1.6 mm 0.063 in
1.6 mm 0.063 in
3)If the cable is extended to 20 m 65.617 ft or longer, confirm that the supply voltage at the end of the cable attached to the sensor is 4.5 V or higher.
U-shaped Micro Photoelectric Sensor PM-25SERIES PM-45SERIES PM-65SERIES
401
Compact / Connector built-in type PM-65 SERIES
FIBER
SENSORS
Easy connection with a single touch using commercially-available connectors
LASER
SENSORS
Connector attached cable
1 m 3.281 ft, 2 m 6.562 ft,
3 m 9.843 ft, 5 m 16.404 ft
Connector attached bending-resistant cable
1 m 3.281 ft, 2 m 6.562 ft,
*
NPN output
PNP output
PHOTO-
ELECTRIC
SENSORS
Cable type
3 m 9.843 ft, 5 m 16.404 ft
Recognition
Certified
Connector attached cable
1 m 3.281 ft, 2 m 6.562 ft,
3 m 9.843 ft, 5 m 16.404 ft
Connector attached bending-resistant cable
1 m 3.281 ft, 2 m 6.562 ft,
3 m 9.843 ft, 5 m 16.404 ft
MICRO
PHOTO-
Built-in connector
* NPN output type only
ELECTRIC
SENSORS
AREA
SENSORS
SAFETY LIGHT
CURTAINS
/
SAFETY
PM-K65
PM-T65
PM-T65W
PM-L65
PM-Y65
PM-F65
PM-F65W
PM-R65
PM-R65W
COMPONENTS
PRESSURE /
FLOW
SENSORS
ORDER GUIDE
INDUCTIVE
PROXIMITY
SENSORS
PARTICULAR
USE
SENSORS
Type
Appearance (mm in)
Sensing range
Model No.
PM-K65
Output
Output operation
SENSOR
OPTIONS
NPN open-collector
transistor
SIMPLE
WIRE-SAVING
UNITS
7 0.276
22.4
0.882
26
PNP open-collector
transistor
WIRE-SAVING
SYSTEMS
PM-K65-P
PM-T65
1.024
MEASURE-
MENT
NPN open-collector
transistor
SENSORS
13.7 0.539
STATIC
CONTROL
DEVICES
PNP open-collector
transistor
22.4
26
1.024
PM-T65-P
PM-T65W
PM-T65W-P
PM-L65
0.882
LASER
MARKERS
22.4
0.882
NPN open-collector
transistor
PLC
16.7 0.657
HUMAN
MACHINE
PNP open-collector
transistor
INTERFACES
26
1.024
ENERGY
MANAGEMENT
SOLUTIONS
NPN open-collector
transistor
FA
COMPONENTS
14.9 0.587
PNP open-collector
transistor
MACHINE
VISION
26.2
PM-L65-P
PM-Y65
15.7
1.031
SYSTEMS
0.618
UV
CURING
NPN open-collector
transistor
14.9 0.587
SYSTEMS
Incorporated with 2 outputs:
Light-ON/Dark-ON
6 mm 0.236 in (fixed)
PNP open-collector
transistor
22.7
PM-Y65-P
PM-F65
13.4
0.894
0.528
Selection
Guide
NPN open-collector
transistor
U-shaped
13.5 0.531
Convergent
22.4
Reflective
0.882
PNP open-collector
transistor
13.4
PM-F65-P
PM-F65W
PM-F65W-P
PM-R65
0.528
PM-25/PM-45/
PM-65
NPN open-collector
transistor
13 0.512
22.4
PNP open-collector
transistor
13.4
0.882
0.528
NPN open-collector
transistor
13.5 0.531
22.4
13.4
0.882
PNP open-collector
transistor
PM-R65-P
PM-R65W
0.528
NPN open-collector
transistor
13 0.512
22.4
13.4
PNP open-collector
transistor
0.882
PM-R65W-P
0.528
Note: PM-T65W is mounting-compatible with our conventional model “PM-T64W”.
PM-F65W(-P) is mounting-compatible with our conventional model “PM-F54(P)”.
PM-R65W(-P) is mounting-compatible with our conventional model “PM-R54(P)”.
U-shaped Micro Photoelectric Sensor PM-25SERIES PM-45SERIES PM-65SERIES
402
FIBER
SENSORS
OPTIONS
LASER
SENSORS
PHOTO-
Connector attached cable
ELECTRIC
SENSORS
Designation
Model No.
Description
• CN-14A(-R)-C□
MICRO
PHOTO-
ELECTRIC
SENSORS
Length: 1m 3.281 ft
Length: 2m 6.562 ft
Length: 3m 9.843 ft
Length: 5m 16.404 ft
Length: 1m 3.281 ft
Length: 2m 6.562 ft
Length: 3m 9.843 ft
Length: 5m 16.404 ft
CN-14A-C1
CN-14A-C2
CN-14A-C3
CN-14A-C5
CN-14A-R-C1
CN-14A-R-C2
CN-14A-R-C3
CN-14A-R-C5
CN-14A
0.2 mm2 4-core cabtyre cable with
connector on one end
Cable outer diameter: ø3.7 mm
ø0.146 in
Connector
attached cable
AREA
SENSORS
SAFETY LIGHT
CURTAINS
SAFETY
/
COMPONENTS
Connector
attached cable
0.2 mm2 4-core cabtyre cable with
connector on one end
Cable outer diameter: ø3.7 mm
ø0.146 in
PRESSURE /
FLOW
Connector
• CN-14A
SENSORS
Contact
Bending-
resistant
INDUCTIVE
PROXIMITY
SENSORS
4
Connector
Set of 10 housings and 40 contacts
PARTICULAR
USE
Housing
SENSORS
SENSOR
OPTIONS
SPECIFICATIONS
SIMPLE
WIRE-SAVING
UNITS
Compact / Connector built-in type
Type
Mounting-compatible with conventional model (Note 2)
WIRE-SAVING
SYSTEMS
NPN output
PM-□65
PM-□65W
MEASURE-
MENT
Item
PNP output
PM-□65-P
PM-□65W-P
SENSORS
STATIC
CE marking directive compliance
Sensing range
EMC Directive, RoHS Directive
CONTROL
DEVICES
6 mm 0.236 in (fixed)
0.8 × 1.2 mm 0.031 × 0.047 in opaque object
0.05 mm 0.002 in or less
Minimum sensing object
Hysteresis
LASER
MARKERS
Repeatability
0.01 mm 0.0004 in or less
PLC
Supply voltage
5 to 24 V DC ±10 % Ripple P-P 10 % or less
15 mA or less
HUMAN
Current consumption
MACHINE
INTERFACES
<NPN output type>
NPN open-collector transistor
• Maximum sink current: 50 mA
<PNP output type>
PNP open-collector transistor
• Maximum source current: 50 mA
ENERGY
MANAGEMENT
SOLUTIONS
Output
• Applied voltage: 30 V DC or less (between output and 0 V)
• Residual voltage: 2 V or less (at 50 mA sink current)
1 V or less (at 16 mA sink current)
• Applied voltage: 30 V DC or less (between output and +V)
• Residual voltage: 2 V or less (at 50 mA source current)
1 V or less (at 16 mA source current)
FA
COMPONENTS
MACHINE
VISION
Output operation
Short-circuit protection
Response time
Incorporated with 2 outputs: Light-ON/Dark-ON
SYSTEMS
Incorporated
Under light received condition: 20 μs or less, Under light interrupted condition: 80 μs or less (Maximum response frequency: 3 kHz) (Note 3)
Orange LED (lights up under light received condition)
UV
CURING
SYSTEMS
Operation indicator
Pollution degree
Protection
3
IP40 (IEC)
Ambient temperature
Ambient humidity
Ambient illuminance
Voltage withstandability
Insulation resistance
Vibration resistance
Shock resistance
Emitting element
Material
–25 to +55 °C –13 to +131 °F (No dew condensation or icing allowed), Storage: –30 to +80 °C –22 to +176 °F
5 to 85 % RH, Storage: 5 to 95 % RH
Selection
Guide
U-shaped
Fluorescent light: 1,000 ℓx or less at the light-receiving face
Convergent
1,000 V AC for one min. between all supply terminals connected together and enclosure
20 MΩ, or more, with 250 V DC megger between all supply terminals connected together and enclosure
10 to 2,000 Hz frequency, 1.5 mm 0.059 in double amplitude (maximum acceleration 196 m/s2) in X, Y and Z directions for two hours each
15,000 m/s2 acceleration (1,500 G approx.) in X, Y and Z directions three times each
Infrared LED (Peak emission wavelength: 855 nm 0.034 mil, non-modulated)
Enclosure: PBT, Display section: Polycarbonate
Reflective
PM-25/PM-45/
PM-65
Cable length
Extension up to total 100 m 328.084 ft is possible with 0.3 mm2, or more, cable. (Note 4)
Weight
Net weight: 3 g approx., Gross weight: 3 g approx.
Notes: 1)Where measurement conditions have not been specified precisely,
the conditions used were an ambient temperature of +23 °C +73.4 °F.
2)PM-T65W is mounting-compatible with our conventional model “PM-T64W”.
PM-F65W(-P) is mounting-compatible with our conventional model “PM-F54(P)”.
PM-R65W(-P) is mounting-compatible with our conventional model “PM-R54(P)”.
3)The response frequency is the value when the disc, given in the figure below, is rotated.
Recommended connector
Contact: SPHD-001T-P0.5, Housing: PAP-04V-S
(Manufactured by J.S.T. Mfg. Co., Ltd.)
Note: Contact the manufacturer for details of the recommended products.
Recommended crimping tool
1.8 mm 0.071 in
Disc
Model No. : YC-610R (Manufactured by J.S.T. Mfg. Co., Ltd.)
Note: Contact the manufacturer for details of the recommended products.
Disc
t = 0.2 mm 0.008 in
1.6 mm 0.063 in
1.6 mm 0.063 in
4)If the cable is extended to 20 m 65.617 ft or longer, confirm that the supply
voltage at the end of the cable attached to the sensor is 4.5 V or higher.
U-shaped Micro Photoelectric Sensor PM-25SERIES PM-45SERIES PM-65SERIES
403
FIBER
I/O CIRCUIT AND WIRING DIAGRAMS
SENSORS
LASER
SENSORS
NPN output type
PHOTO-
ELECTRIC
SENSORS
I/O circuit diagram
Wiring diagram (PM-25 series / PM-45 series)
MICRO
PHOTO-
Color code of cable type and
connector attached cable
Brown
ELECTRIC
SENSORS
Load
(Brown) +V
(Black) Output 1
AREA
Black (Note)
ZD1
Tr1
SENSORS
Load
+
Load
5 to 24 V DC
±±1 %
(Note)
SAFETY LIGHT
Load
+
–
–
CURTAINS
/
White (Note)
5 to 24 V DC
±10 %
50 mA max.
(White) Output 2 (Note)
SAFETY
COMPONENTS
ZD2
Tr2
PRESSURE /
FLOW
50 mA max.
Blue
D
(Blue) 0 V
SENSORS
Note: Ensure to insulate the unused output wire.
INDUCTIVE
PROXIMITY
SENSORS
Internal circuit
Users’ circuit
PARTICULAR
USE
Note: Ensure to insulate the unused output wire.
Output operation
SENSORS
Color code
Output operation
Light-ON
Symbols…D: Reverse supply polarity protection diode
ZD1, ZD2: Surge absorption zener diode
Tr1, Tr2: NPN output transistor
SENSOR
OPTIONS
Output 1
Output 2
Black
SIMPLE
WIRE-SAVING
UNITS
White
Dark-ON
WIRE-SAVING
SYSTEMS
Terminal arrangement diagram (PM-65 series)
MEASURE-
MENT
SENSORS
STATIC
CONTROL
DEVICES
1
2
3
4
LASER
MARKERS
Terminal No.
Designation
+V
PLC
1
2
3
4
Output 1: Light-ON
Output 2: Dark-ON
0 V
HUMAN
MACHINE
INTERFACES
ENERGY
MANAGEMENT
SOLUTIONS
FA
COMPONENTS
PNP output type
MACHINE
VISION
Wiring diagram (PM-25 series / PM-45 series)
I/O circuit diagram
SYSTEMS
UV
CURING
Color code of cable type and
connector attached cable
Brown
SYSTEMS
D
(Brown) +V
Black (Note)
+
Tr1
5 to 24 V DC
±±1 %
50 mA max.
–
+
–
White (Note)
(Black) Output 1 (Note)
Tr2
5 to 24 V DC
±10 %
Load
50 mA max.
ZD1
Selection
Guide
Load
Load
(White) Output 2 (Note)
Blue
Load
U-shaped
ZD2
(Blue) 0 V
Convergent
Note: Ensure to insulate the unused output wire.
Reflective
Internal circuit
Users’ circuit
Output operation
Note: Ensure to insulate the unused output wire.
PM-25/PM-45/
PM-65
Color code
Output operation
Light-ON
Symbols…D: Reverse supply polarity protection diode
ZD1, ZD2: Surge absorption zener diode
Tr1, Tr2: PNP output transistor
Output 1
Output 2
Black
White
Dark-ON
Terminal arrangement diagram (PM-65 series)
1
2
3
4
Terminal No.
Designation
+V
1
2
3
4
Output 1: Light-ON
Output 2: Dark-ON
0 V
U-shaped Micro Photoelectric Sensor PM-25SERIES PM-45SERIES PM-65SERIES
404
SENSING CHARACTERISTICS (TYPICAL)
FIBER
SENSORS
LASER
SENSORS
PM-25 series
PM-45 series
PHOTO-
Sensing position
Sensing position
ELECTRIC
SENSORS
MICRO
PHOTO-
ELECTRIC
SENSORS
Dark-
ON
Dark-
ON
Dark-
ON
Dark-
ON
AREA
8.4 mm
0.331 in
5.5 mm
0.217 in
SENSORS
6 mm
7 mm
0.236 in
0.276 in
SAFETY LIGHT
ℓ
ℓ
CURTAINS
SAFETY
/
ℓ
ℓ
COMPONENTS
20.0m79min
PRESSURE /
FLOW
2 mm
0.079 in
SENSORS
Beam
Beam
axis
Light-
ON
Light-
axis
Light-
ON
INDUCTIVE
PROXIMITY
SENSORS
Light-
ON
ON
0
1
2
3
4
0
1
2
3
4
0
1
2
3
4
0
1
2
3
4
0.039
0.079
0.118
0.157
0.039
0.079
0.118
0.157
0.039
0.079
0.118
0.157
0.039
0.079
0.118
0.157
PARTICULAR
USE
Operating point ℓ (mm in)
Operating point ℓ (mm in)
Operating point ℓ (mm in)
Operating point ℓ (mm in)
SENSORS
PM-65 series
SENSOR
OPTIONS
Sensing position
SIMPLE
WIRE-SAVING
UNITS
Dark-
ON
Dark-
ON
WIRE-SAVING
SYSTEMS
8.4 mm
0.331 in
MEASURE-
MENT
7 mm
0.276 in
SENSORS
ℓ
ℓ
STATIC
CONTROL
DEVICES
20.0m79min
LASER
MARKERS
Beam
axis
Light-
ON
Light-
ON
0
1
2
3
4
0
1
2
3
4
PLC
0.039
0.079
0.118
0.157
0.039
0.079
0.118
0.157
Operating point ℓ (mm in)
Operating point ℓ (mm in)
HUMAN
MACHINE
INTERFACES
ENERGY
PRECAUTIONS FOR PROPER USE
MANAGEMENT
SOLUTIONS
Refer to p.1552~ for general precautions.
FA
COMPONENTS
PM-45 series
• Never use this product as a sensing device
for personnel protection.
• In case of using sensing devices for personnel
protection, use products which meet laws and
standards, such as OSHA, ANSI or IEC etc.,
for personnel protection applicable in each
region or country.
MACHINE
VISION
• The following conditions must be observed when using
screws to mount the sensor unit.
SYSTEMS
UV
CURING
SYSTEMS
Screw Spring washer
Flat washer
Tightening torque
ø6 mm ø0.236 in
(small round washer)
M3 screw
1 pc.
0.5 N·m
M3 screws
Selection
Guide
Mounting
Spring washer
U-shaped
Plain washer
PM-25 series
Outer diameter
ø6 mm ø0.236 in
Convergent
• The following conditions must be observed when using
Reflective
screws to mount the sensor unit.
PM-25/PM-45/
PM-65
Screw Spring washer
Flat washer
Tightening torque
ø4.3 mm ø0.169 in
(small round washer)
M2 screw
M3 screw
1 pc.
1 pc.
0.15 N·m
PM-65 series
ø6 mm ø0.236 in
(small round washer)
0.5 N·m
• The following conditions must be observed when using
screws to mount the sensor unit.
< When using M2 screws for mounting > < When using M3 screws for mounting >
Screw Spring washer
Flat washer
Tightening torque
M2 screws
M3 screws
ø6 mm ø0.236 in
(small round washer)
M3 screw
1 pc.
0.5 N·m
Spring washer
Spring washer
M3 screws
Plain washer
Plain washer
Outer diameter
Outer diameter
ø6 mm ø0.236 in
ø4.3 mm ø0.169 in
Spring washer
Plain washer
Outer diameter
When using the optional mounting screw set MS-M2, a
spring washer is included.
ø6 mm ø0.236 in
• In case the PM-25 series is used at an ambient
temperature of +50 °C +122 °F, or more, make sure to
mount it on a metal body.
U-shaped Micro Photoelectric Sensor PM-25SERIES PM-45SERIES PM-65SERIES
405
PRECAUTIONS FOR PROPER USE
Refer to p.1552~ for general precautions.
FIBER
SENSORS
LASER
Cable extension
Wiring (PM-65 series)
Connection method
SENSORS
PHOTO-
ELECTRIC
SENSORS
PM-25 series / PM-45 series
• Cable extension is possible up to an overall length
of 100 m 328.084 ft with a 0.3 mm2, or more, cable.
However, since a voltage drop shall occur due to the cable
extension, ensure that the power supply voltage at the
end of the cable attached to the sensor is within the rating.
• Insert the connector attached cable CN-14A-C□ /
CN-14A-R-C□ in the connector part of this product as
shown in the figure below.
MICRO
PHOTO-
ELECTRIC
SENSORS
AREA
SENSORS
SAFETY LIGHT
Lock release lever
CURTAINS
/
SAFETY
COMPONENTS
Total cable length ±11 m 328.184 ft
PRESSURE /
FLOW
CN-14A-C□ / CN-14A-R-C□
SENSORS
<Connector>
Cable attached
to sensor
+V
Output
1 V
Housing: PAP-04V-S
Extension cable
INDUCTIVE
PROXIMITY
SENSORS
(Manufactured by J.S.T. Mfg. Co., Ltd.)
+
–
5 to 24 V DC
±±1 %
<Connector pin position>
PARTICULAR
USE
SENSORS
Supply voltage: 4.5 V or more
SENSOR
OPTIONS
Connector pin No.
But, when the overall cable length, including the cable
attached to the sensor, is as given below, there is no
need to confirm the voltage.
SIMPLE
WIRE-SAVING
UNITS
Terminal designation
+V
Output 1 Output 2 0 V
WIRE-SAVING
SYSTEMS
Disconnection method
Conductor cross-section
Total cable length
• Press and hold the lock release lever to disconnect the
cable connector.
MEASURE-
MENT
area of extension cable
SENSORS
0.08 to 0.1 mm2
0.2 mm2
Up to 5 m 16.404 ft
Up to 10 m 32.808 ft
Up to 20 m 65.617 ft
Note: Pulling the cable without pressing the lock release lever in an attempt
to disconnect the connector can cause wire breakage in the cable or
damage to the connector.
STATIC
CONTROL
DEVICES
LASER
0.3 mm2
MARKERS
When using the product as an S-mark compatible
product in Korea
PLC
PM-65 series
HUMAN
MACHINE
• The power supply cable and output cable connected to the
product must be less than 10 m 32.808 ft.
• Cable extension is possible up to an overall length
of 100 m 328.084 ft with a 0.3 mm2, or more, cable.
However, since a voltage drop shall occur due to the
cable extension, ensure that the power supply voltage at
the end of the connector attached cable of the sensor or
at the sensor terminals is within the rating.
INTERFACES
ENERGY
MANAGEMENT
SOLUTIONS
Others
FA
COMPONENTS
• This device has been developed / produced for industrial
use only.
MACHINE
VISION
• Since the sensor is intended for
use inside machines, no special
countermeasures have been taken
against extraneous light. Take care
that extraneous light is not directly
incident on the beam receiving
section.
• Do not use during the initial transient time (50 ms) after
the power supply is switched on.
• Note that the cable of PM-□25-R loses its flexibility when
the ambient temperature decreases to about -10 °C +14 °F.
SYSTEMS
Total cable length ±11 m 328.184 ft
Connector
UV
CURING
+V
attached cable
Extension cable
SYSTEMS
+
–
5 to 24 V DC
±±1 %
Output
1 V
Supply voltage: 4.5 V or more
Selection
Guide
But, when the overall cable length, including the cable
attached to the sensor, is as given below, there is no
need to confirm the voltage.
U-shaped
Convergent
Reflective
• The cable of PM-□25-R is a bending-resistant cable
usable on a moving base. When the sensor is mounted
on a moving base, secure the sensor cable joint at the
unit in place so that stress is not applied to it.
• When storing PM-□25-R, make sure that the cable
does not come into contact with the sensing section or
operation indicator.
Conductor cross-section
Total cable length
PM-25/PM-45/
PM-65
area of extension cable
0.08 to 0.1 mm2
0.2 mm2
Up to 5 m 16.404 ft
Up to 10 m 32.808 ft
Up to 20 m 65.617 ft
0.3 mm2
• If the sensor is used in a place having excessive dust,
periodically clean the emitting and receiving sections with
a dry, soft cloth.
• If there is a large surge generating equipment, such as,
motor, solenoid, electromagnetic valve, etc., in the vicinity
of the sensor, use a surge absorber on that equipment.
Further, do not run the sensor cables along power lines
and use a capacitor between +V and 0 V, if required.
Use the sensor after confirming that the surge has been
eliminated.
U-shaped Micro Photoelectric Sensor PM-25SERIES PM-45SERIES PM-65SERIES
406
DIMENSIONS (Unit: mm in)
The CAD data can be downloaded from our website.
FIBER
SENSORS
LASER
Sensor
Sensor
PM-K25□
PM-L25□
SENSORS
PHOTO-
ELECTRIC
SENSORS
Operation indicator (Orange)
1.75
3
6
Beam
3 0.118
0.118
MICRO
0.236 axis
PHOTO-
ELECTRIC
SENSORS
0.069
2-elongated mounting holes
Operation indicator (Orange)
Beam
23.9
0.941
axis
12
0.472
6
0.236
AREA
SENSORS
1.6
0.063
3.2
18.7
SAFETY LIGHT
Operation indicator
CURTAINS
SAFETY
/
0.736
(Orange)
13.4
0.528
6
COMPONENTS
0.126
8
6
0.236
0.315
PRESSURE /
FLOW
2 0.079
0.236
Operation indicator (Orange)
2
SENSORS
13.4
0.528
6
5.5 Beam
0.217 axis
Beam size:
1.2 × 0.8 0.047 × 0.031
INDUCTIVE
PROXIMITY
SENSORS
12.3
0.484
8 0.315
6
0.236
0.079
0.236
Beam
axis
5.5
Beam size:
PARTICULAR
USE
0.217
5 0.197
2-ø3.2 ø0.126
mounting holes
12
0.472
1.2 × 0.8 0.047 × 0.031
10
1.7
0.067
SENSORS
0.394
4 0.157
ø6
ø0.236
SENSOR
OPTIONS
ø2.5 ø0.098 cable
ø2.5 ø0.098 cable
2
0.079
SIMPLE
WIRE-SAVING
UNITS
WIRE-SAVING
SYSTEMS
MEASURE-
MENT
Sensor
Sensor
PM-U25□
PM-F25□
SENSORS
STATIC
CONTROL
DEVICES
Operation indicator (Orange)
6
Beam
axis
0.236
LASER
6
0.236
3 0.118
MARKERS
Beam
axis
Operation indicator (Orange)
4
0.157
PLC
6.7
0.264
Operation indicator
(Orange)
13.4
0.528
6
Operation indicator (Orange)
2 0.079
11.7
HUMAN
Beam size:
1.2 × 0.8 0.047 × 0.031
0.461
13.4
MACHINE
INTERFACES
1.5 0.059
(2 0.079)
0.528
6.2
0.244
3
0.236
6
0.118
0.236
ENERGY
Beam
axis
5.5
Beam size:
1.2 × 0.8 0.047 × 0.031
MANAGEMENT
SOLUTIONS
0.217
Beam 5.5
11.5
axis 0.217
16
0.630
12
12.5
8 0.315
0.453
0.472
0.492
5
3.2 0.126
FA
ø2
0.197
COMPONENTS
ø0.079
2-ø3.2 ø0.126
mounting holes
2
0.079
R1.6
R0.063
MACHINE
VISION
1.6
0.063
Elongated
mounting hole
1.95 0.077
ø2.5 ø0.098 cable
ø2.5 ø0.098 cable
SYSTEMS
ø4.8
8
ø0.189
UV
0.315
CURING
SYSTEMS
Sensor
Selection
Guide
PM-R25□
U-shaped
Convergent
Beam
6
Reflective
axis 0.236
Operation indicator
(Orange)
PM-25/PM-45/
PM-65
4
0.157
6.7
0.264
11.7
0.461
Beam size:
1.5
13.4
Operation indicator
(Orange)
1.2 × 0.8 0.047 × 0.031
0.059
0.528
6.2
0.244
3
6
0.236
(2 0.079)
R1.6
R0.063
0.118
5.5 Beam
0.217 axis
12
0.472
12.5
0.492
8 0.315
2 0.079
5 0.197 3.2 0.126
ø2
ø0.079
Elongated
mounting hole
1.6 0.063
ø2.5 ø0.098 cable
ø4.8
ø0.189
1.95 0.077
U-shaped Micro Photoelectric Sensor PM-25SERIES PM-45SERIES PM-65SERIES
407
FIBER
DIMENSIONS (Unit: mm in)
The CAD data can be downloaded from our website.
SENSORS
LASER
SENSORS
Sensor
Sensor
PM-K45□
PM-T45□
PHOTO-
ELECTRIC
SENSORS
25.4
1.000
Operation indicator (Orange)
3.5
0.138
MICRO
PHOTO-
19
0.748
ELECTRIC
SENSORS
7
0.276
AREA
SENSORS
Operation indicator (Orange)
2-ø3.2 ø0.126
mounting holes
13.7
0.539
13.4
0.528
6
SAFETY LIGHT
26 1.024
19 0.748
CURTAINS
/
19
0.748
13.4
0.528
6
SAFETY
Beam size:
Operation indicator
(Orange)
2
COMPONENTS
1.2 × 0.8 0.047 × 0.031
6
6
0.236
0.079
Beam size:
2
0.236
PRESSURE /
FLOW
1.2 × 0.8 0.047 × 0.031
0.236
2-ø3.8 ø0.150
mounting holes
0.079
SENSORS
Beam
axis
0.236
8.4 0.331
13
0.512
17.2
0.677
Beam
axis
13.8
0.543
INDUCTIVE
PROXIMITY
SENSORS
15.2
0.598
18.1
0.713
8.4 0.331
17.2
6.2
3.2 0.126
0.677
0.244
21.3
PARTICULAR
USE
Operation indicator
0.839
11 0.433
(R)
(Orange)
2.5
0.098
SENSORS
5.5
2-elongated
mounting holes
0.217
4.3
0.169
SENSOR
OPTIONS
ø2.5 ø0.098 cable
ø2.5 ø0.098 cable
SIMPLE
WIRE-SAVING
UNITS
WIRE-SAVING
SYSTEMS
MEASURE-
MENT
Sensor
Sensor
PM-L45□
PM-Y45□
SENSORS
STATIC
CONTROL
DEVICES
26 1.024
3.5
Operation indicator (Orange)
3.5 0.138
7
0.138
19 0.748
2-ø3.5 ø0.138 mounting holes
Operation indicator (Orange)
0.276
LASER
7.5 0.295
3.2 0.126
7 0.276
MARKERS
01.3094
7 0.276
6
20.6 0.236
2-elongated mounting holes
0.811
PLC
4
0.157
HUMAN
MACHINE
ø2.5 ø0.098 cable
5 0.197
INTERFACES
1.5
0.059
ENERGY
MANAGEMENT
SOLUTIONS
ø2.5 ø0.098 cable
Operation indicator (Orange)
19 0.748
13.4
6
0.236
Beam size:
1.2 × 0.8 0.047 × 0.031
2
0.079
2-ø3.2 ø0.126
mounting holes
13.4
0.528
Beam size:
2
0.079
FA
0.528
6
1.2 × 0.8 0.047 × 0.031
COMPONENTS
0.236
6
0.236
Beam
axis
0.3540.496
4.5
0.177
Beam
axis
12.6
0.496
8.4 0.331
MACHINE
VISION
9
4.5
0.177
14.6
0.575
12.6
8.4 0.331
2.5
0.098
14.6
0.575
SYSTEMS
7.2 0.283
UV
CURING
2 0.079
SYSTEMS
Operation indicator (Orange)
2
0.079
Selection
Guide
Sensor
Sensor
PM-F45□
PM-R45□
U-shaped
Operation indicator (Orange)
Operation indicator
(Orange)
Convergent
Reflective
PM-25/PM-45/
PM-65
13
13.7
Beam size:
13.7
0.539
0.512
13
1.2 × 0.8 0.047 × 0.031
0.539
Beam size:
13.4
0.528
6
0.512
7
13.4
1.2 × 0.8 0.047 × 0.031
2
Operation indicator
(Orange)
0.276
2
7
0.528
Operation indicator
(Orange)
6 0.236
17.2
0.079
0.276
0.079
6
0.236
6 0.236
0.236
Beam
Beam
8.4 0.331
8.4 0.331
axis
axis
9 0.354
15.2
9 0.354
17.2
0.677
15.2
0.598
21.3
21.3
0.839
0.677
0.598
0.839
13.6
0.535
7
13.6
0.535
7
0.276
0.276
2-ø3.5 ø0.138
mounting holes
2-ø3.5 ø0.138
mounting holes
2.5 0.098
2.5 0.098
ø2.5 ø0.098 cable
ø2.5 ø0.098 cable
U-shaped Micro Photoelectric Sensor PM-25SERIES PM-45SERIES PM-65SERIES
408
DIMENSIONS (Unit: mm in)
FIBER
The CAD data can be downloaded from our website.
SENSORS
LASER
SENSORS
Sensor
Sensor
PM-K65 PM-K65-P
PM-T65 PM-T65-P
PHOTO-
ELECTRIC
SENSORS
Operation indicator (Orange)
Beam size:
26 1.024
2-elongated mounting holes
20 0.787
6.5
0.256
MICRO
26 1.024
20 0.787
PHOTO-
ELECTRIC
SENSORS
1.2 × 0.8 0.047 × 0.031
7.4 0.291
7
6
AREA
Beam
axis
6.2
0.276 0.236
0.244 3.2 0.126
SENSORS
13
SAFETY LIGHT
3.5 0.138
1.6 0.063
0.512
CURTAINS
SAFETY
/
2-ø3.2 ø0.126 mounting holes
4.1
0.161
COMPONENTS
13.4
0.528
6
PRESSURE /
FLOW
Beam size: 1.2 × 0.8 0.047 × 0.031
Operation indicator (Orange)
2
0.079
6
Operation indicator (Orange)
0.236
SENSORS
0.236
Operation indicator (Orange)
INDUCTIVE
PROXIMITY
SENSORS
Beam
axis
22.4
8.4 0.331
0.882
13.8
0.543
8.4
22.4
0.882
Beam
axis
2
0.079
8.3
0.327
3.2 0.126
0.331
PARTICULAR
USE
7.4 0.291
SENSORS
3.7 0.146
13.7
0.539
13.4
0.528
6
0.236
7
SENSOR
OPTIONS
2-mounting holes
2 0.079
3.7 0.146
20 0.787
0.276
Beam
axis
SIMPLE
3
WIRE-SAVING
UNITS
0.118
WIRE-SAVING
SYSTEMS
MEASURE-
MENT
Sensor
Sensor
PM-T65W PM-T65W-P
PM-L65 PM-L65-P
SENSORS
STATIC
26 1.024
20 0.787
Operation indicator (Orange)
Beam size:
CONTROL
DEVICES
2-elongated
mounting holes
26.2 1.031
6.5
0.256
LASER
4.1 0.161
1.6 0.063
20 0.787
3.9 0.154
MARKERS
1.2 × 0.8 0.047 × 0.031
7.4 0.291
1.7 0.067
6
PLC
0.236
7
6
Beam
axis
2-mounting
holes
15.7 0.276
0.618
0.236
13 0.512
HUMAN
MACHINE
INTERFACES
3.2
0.126
Beam size:
1.2 × 0.8 0.047 × 0.031
ENERGY
22.4 0.882
6
0.236
MANAGEMENT
SOLUTIONS
13.4
0.528
6.5
8.4
0.331
8.3
0.327
0.256
(2 0.079)
6
(2 0.079)
Beam axis
FA
0.236
Beam
axis
Operation indicator (Orange)
COMPONENTS
13.4
0.528
6
8.4 0.331
16.7
0.657
14.9
0.587
MACHINE
VISION
9 0.354
0.236
01.3094
12.9 0.508
SYSTEMS
7.2 0.283
4 0.157
Beam axis
UV
CURING
SYSTEMS
2.3 0.091
20 0.787
Operation indicator
(Orange)
2-ø3.2 ø0.126 mounting holes
Operation indicator
(Orange)
7.4
0.291
26.2 1.031
14
0.551
Selection
Guide
Sensor
Sensor
PM-Y65 PM-Y65-P
PM-F65 PM-F65-P
U-shaped
Convergent
Operation indicator (Orange)
Operation indicator (Orange)
Reflective
2-ø3.5 ø0.138
mounting holes
3 0.118
Beam
axis
6 0.236
6.5 0.256
7
0.276
2.5 0.098
PM-25/PM-45/
PM-65
3.5 0.138
7
0.276
22.7
0.894
6
Beam
axis
Beam size:
1.2 × 0.8 0.047 × 0.031
3
0.236
0.118
Beam size:
Operation indicator (Orange) 1.2 × 0.8 0.047 × 0.031
13.4
6.5
0.256
0.528
13.4
6
0.236
2.5
0.098
0.528
(2 0.079)
ø2.4 ø0.094
2
6
0.236
0.079
Beam
axis
8.4
0.331
Operation indicator (Orange)
3.2
Beam
axis
0.126
14.9 8.4 0.331
0.587
12.9
0.508
16.3
0.642
3.7 2.1
22.4
0.146 0.083 0.882
8.3
0.327
7.7
0.303
4.1 0.161
7
0.276
Elongated mounting hole
13.5
0.531
U-shaped Micro Photoelectric Sensor PM-25SERIES PM-45SERIES PM-65SERIES
409
FIBER
DIMENSIONS (Unit: mm in)
The CAD data can be downloaded from our website.
SENSORS
LASER
SENSORS
Sensor
Sensor
PM-F65W PM-F65W-P
PM-R65 PM-R65-P
PHOTO-
ELECTRIC
SENSORS
13.7
3
Operation indicator (Orange)
0.539
7
0.118
Operation indicator (Orange)
MICRO
PHOTO-
ELECTRIC
SENSORS
0.276
6
6.5
Beam
axis
0.236 0.256
Beam
axis
AREA
SENSORS
13
0.512
Beam size:
1.2 × 0.8 0.047 × 0.031
SAFETY LIGHT
3
7
0.276
CURTAINS
/
2.5 0.098
0.118
SAFETY
Operation indicator
(Orange)
6.5 0.256
Beam size:
1.2 × 0.8 0.047 × 0.031
COMPONENTS
13.4
0.528
6
Operation indicator (Orange)
ø2.4
6 0.236
(2 0.079)
PRESSURE /
FLOW
13.4
SENSORS
2-ø3.5 ø0.138
mounting holes
0.236
0.528
(2 0.079)
6
Beam
axis
ø0.094
2.5 0.098
INDUCTIVE
PROXIMITY
SENSORS
0.236
9 0.354
Beam
axis
22.4
3.2
0.126
8.4 0.331
0.882
13.6
7
PARTICULAR
USE
16.3
0.642
11.4
0.449
0.535 0.276
22.4
0.882
3.7 0.146
8.3 0.327
SENSORS
8.3 0.327
7.7 0.303
SENSOR
OPTIONS
4.1 0.161
2.1
0.083
7
Elongated
mounting hole
SIMPLE
WIRE-SAVING
UNITS
0.276
13.5
0.531
WIRE-SAVING
SYSTEMS
MEASURE-
MENT
Sensor
Connector attached cable (Optional)
PM-R65W PM-R65W-P
CN-14A-C□ CN-14A-R-C□
SENSORS
STATIC
CONTROL
DEVICES
L
13.7
0.539
Operation indicator (Orange)
35
50
7
1.378
1.969
LASER
0.276
8
8
MARKERS
Beam
axis
0.315
0.315
13
0.512
PLC
Beam size:
1.2 × 0.8 0.047 × 0.031
7
0.276
2.5 0.098
HUMAN
MACHINE
6.5 0.256
13.4
ø3.7 ø0.146 cable
0.528
INTERFACES
6 0.236
(2 0.079)
Operation indicator (Orange)
6
0.236
2-ø3.5 ø0.138
mounting holes
ENERGY
MANAGEMENT
SOLUTIONS
• Length L
Beam
axis
9 0.354
Model No.
Length L
22.4
FA
0.882
7 0.276 13.6
COMPONENTS
11.4
0.449
CN-14A(-R)-C1
CN-14A(-R)-C2
CN-14A(-R)-C3
CN-14A(-R)-C5
1,000 39.370
2,000 78.740
3,000 118.110
5,000 196.850
0.535
8.3 0.327
MACHINE
VISION
SYSTEMS
UV
CURING
SYSTEMS
Selection
Guide
U-shaped
Convergent
Reflective
PM-25/PM-45/
PM-65
410
MEMO
相关型号:
©2020 ICPDF网 联系我们和版权申明