PNA4620M [PANASONIC]
Bipolar Integrated Circuit with Photodetection Function; 与光检测功能的双极集成电路型号: | PNA4620M |
厂家: | PANASONIC |
描述: | Bipolar Integrated Circuit with Photodetection Function |
文件: | 总5页 (文件大小:98K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Photo IC
PNA4611M Series
(PNA4611M/4612M/4613M/4614M/4620M)
Bipolar Integrated Circuit with Photodetection Function
For infrared remote control systems
Unit : mm
5.25±0.3
7.0±0.2
3.5
2.25
5 ˚
Features
5 ˚
High sensitivity (extension distance is 11 m or more)
R2.25±0.1
External parts not required
Resin to cutoff visible light is used
2.0±0.1
3-1.5±0.2
Supports various metal holders with improved electromagnetic
noise resistance
1.0±0.1
+0.2
3-0.5
–0.15
0.45±0.2
Absolute Maximum Ratings (Ta = 25˚C)
Parameter
Symbol
VCC
PD
Ratings
– 0.5 to +7
200
Unit
V
1
2
3
2-2.54
Power supply voltage
Power dissipation
mW
˚C
1: VOUT
2: GND
3: VCC
Operating ambient temperature
Storage temperature
Topr
–20 to +75
– 40 to +100
Tstg
˚C
Main Characteristics (Ta = 25˚C VCC = 5V)
Parameter
Operating supply voltage
Current consumption
Maximum reception distance
Low-level output voltage
High-level output voltage
Low-level pulse width
High-level pulse width
PNA4611M
Symbol
VCC
Conditions
min
4.7
1.8
11
typ
5.0
max
5.3
Unit
V
ICC
Note 3
Note 1
Note 2
Note 3
Note 1
Note 1
2.4
3.0
mA
m
Lmax
VOL
16
0.35
5.0
0.5
VCC
600
600
V
VOH
TWL
TWH
4.8
200
200
V
400
400
36.7
38.0
40.0
56.9
33.3
µs
µs
PNA4612M
Carrier frequency PNA4613M
PNA4614M
f0
kHz
PNA4620M
Note 1) Fig.1 burst wave, L=Lmax, 16 pulses
Note 2) Fig.2 continuous wave, L ≤ Lmax
Note 3) Light shut off condition
Carrier wave : f0
Carrier wave : f0
400µs
400µs
Fig.1
Fig.2
1
Photo IC
PNA4611M, PNA4612M, PNA4613M, PNA4614M, PNA4620M
Unit : mm
Unit : mm
Type YA
Type YB
7.6
7.6
2-2.54
2-2.54
3-ø0.8
2-2.4×1.4
3-ø0.9
2-2.4×1.4
Recommendation hole location of P.C.board
10.35
Recommendation hole location of P.C.board
15.7
7.6
7.6
3.8
2.25
13.45
2.25
(8.1)
R1.0
(7.4)
2.0
4.0
+0.25
7.4
0.45
–0.15
1
2 3
+0.25
1.0
3-0.5
–0.15
2.0
(2.1)
(4.0)
2-2.54
0.45±0.2
R1.0
7.0
1
2 3
1.0
3-0.5±0.2
1: VO
2: GND
3: VCC
1: VO
2: GND
3: VCC
2-2.54
2.35
(5.5)
Unit : mm
Unit : mm
Type XB
1
2
3
Type XD
2-3.75
7.3
7.8
2-1.8×1.2
3-ø0.9
2-1.7×1.2
1
2
3
3-ø0.9
2-2.54
2-2.54
Recommendation hole location of P.C.board
Recommendation hole location of P.C.board
16
(13.75)
11.4
5.5
7.6
7.6
2.25
2.25
3.6
7.0
3.7±0.6
+0.25
3-0.5
0.6
–0.15
1.0
2-2.54
1: VO
1: VO
2: GND
3: VCC
2: GND
3: VCC
2-2.54
Unit : mm
Type HB
8.8
4.85
0.8×2.2
2.0±0.1
4.4
2-2.2×1.2
1
2
3
0.45
3-ø0.9
2-2.54
Recommendation hole location of P.C.board
(11.9)
3.2
9.97 2.9
7.7
3.7±0.6
+0.25
3-0.5
–0.15
2-2.54
1: VO
2: GND
3: VCC
0.9
Note :Tolerance unless otherwise specified is ±0.5.
2
PNA4611M, PNA4612M, PNA4613M, PNA4614M, PNA4620M
Photo IC
Block Diagram
VCC
(20kΩ)
RL
amplifier
AGC
B.P.F
demodulator
comparator
VO
PD
integrator
GND
constant voltage
peak hold
Panasonic Transmitter Specifications
LED Transmission unit
Standard reception unit
10kΩ
10µF
10V
PNZ323B
20cm
V out
GND
10kΩ
10kΩ
V out 55mV
The light output of the LED transmission unit is adjusted so that the transmission output (V out) of the standard
reception unit will be 55 mV when the transmission waveform (duty = 50%) is output from the LED transmis-
sion unit. Here, infrared sensitivity (SIR) of PNZ323B is 0.53 µA when emission illuminance (H) is 12.45 µW/
cm2.
The maximum reception distance under these specifications is an assurance that TWH and TWL values will be
within the tolerance ranges when 16 consecutive pulses of an optical output equivalent to the maximum recep-
tion distance are transmitted by the above transmission unit (The maximum reception distance is measured in
the dark without external disturbance noise.)
3
Photo IC
PNA4611M, PNA4612M, PNA4613M, PNA4614M, PNA4620M
B.P.F frequency characteristics
L max — Ta
Spectral sensitivity characteristics
(PNA4612M)*
120
100
80
60
40
20
0
100
80
60
40
20
0
100
80
60
40
20
0
VCC = 5V
Transmitter : Standard LED
Transmission unit used
– 20
0
20
40
60
80
100
33
35
37
39
41
43
600 700 800 900 1000 1100 1200
Ambient temperature Ta (˚C )
Carrier frequency (kHz)
Wavelength λ (nm)
* The peaks for PNA4611M, PNA4613M,
PNA4614M, and PNA4620M are all at f0
.
Directivity characteristics
0˚
100
10˚
20˚
90
80
70
60
50
40
30
20
30˚
40˚
50˚
60˚
70˚
80˚
90˚
4
Request for your special attention and precautions in using the technical information
and semiconductors described in this material
(1) An export permit needs to be obtained from the competent authorities of the Japanese Govern-
ment if any of the products or technologies described in this material and controlled under the
"Foreign Exchange and Foreign Trade Law" is to be exported or taken out of Japan.
(2) The technical information described in this material is limited to showing representative character-
istics and applied circuit examples of the products. It does not constitute the warranting of industrial
property, the granting of relative rights, or the granting of any license.
(3) The products described in this material are intended to be used for standard applications or gen-
eral electronic equipment (such as office equipment, communications equipment, measuring in-
struments and household appliances).
Consult our sales staff in advance for information on the following applications:
• Special applications (such as for airplanes, aerospace, automobiles, traffic control equipment,
combustion equipment, life support systems and safety devices) in which exceptional quality and
reliability are required, or if the failure or malfunction of the products may directly jeopardize life or
harm the human body.
• Any applications other than the standard applications intended.
(4) The products and product specifications described in this material are subject to change without
notice for reasons of modification and/or improvement. At the final stage of your design, purchas-
ing, or use of the products, therefore, ask for the most up-to-date Product Standards in advance to
make sure that the latest specifications satisfy your requirements.
(5) When designing your equipment, comply with the guaranteed values, in particular those of maxi-
mum rating, the range of operating power supply voltage and heat radiation characteristics. Other-
wise, we will not be liable for any defect which may arise later in your equipment.
Even when the products are used within the guaranteed values, redundant design is recommended,
so that such equipment may not violate relevant laws or regulations because of the function of our
products.
(6) When using products for which dry packing is required, observe the conditions (including shelf life
and after-unpacking standby time) agreed upon when specification sheets are individually exchanged.
(7) No part of this material may be reprinted or reproduced by any means without written permission
from our company.
Please read the following notes before using the datasheets
A. These materials are intended as a reference to assist customers with the selection of Panasonic
semiconductor products best suited to their applications.
Due to modification or other reasons, any information contained in this material, such as available
product types, technical data, and so on, is subject to change without notice.
Customers are advised to contact our semiconductor sales office and obtain the latest information
before starting precise technical research and/or purchasing activities.
B. Panasonic is endeavoring to continually improve the quality and reliability of these materials but
there is always the possibility that further rectifications will be required in the future. Therefore,
Panasonic will not assume any liability for any damages arising from any errors etc. that may ap-
pear in this material.
C. These materials are solely intended for a customer's individual use.
Therefore, without the prior written approval of Panasonic, any other use such as reproducing,
selling, or distributing this material to a third party, via the Internet or in any other way, is prohibited.
2001 MAR
相关型号:
©2020 ICPDF网 联系我们和版权申明