QFP208-P-2828A [PANASONIC]
Digital RGB Processor LSI; 数字RGB处理器LSI
| 型号： | QFP208-P-2828A |
| 厂家： | 
PANASONIC |
| 描述： | Digital RGB Processor LSI |
| 文件： | 总4页 (文件大小：192K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
DATA SHEET
Part No.
MN82860
Package Code No.
QFP208-P-2828A
SEMICONDUCTOR COMPANY
MATSUSHITA ELECTRIC INDUSTRIAL CO., LTD.
Publication date: December 2004
SDB00108AEM
1
MN82860
MN82860
Digital RGB Processor LSI
Overview
This system LSI , MN82860 is a digital RGB processor
adapted for high-quality picture of pixel display device.
This LSI includes all of picture quality improvement
and high speed A/D converter, and realizes high speed
processing (100 MHz). So it is suitable for pixel display
device dealt with high quality picture and high detailed video.
Feature
• INPUT
Analog/Digital YUV signal
Analog/Digital RGB signal
• OUTPUT
Digital RGB signal
• INPUT OUTPUT (Digital each 8 bit)
YUV signal
• Main Function
Clamp control (Clamp current source including)
Black/White expansion
White character improvement
Horizontal aperture correction
Contrast adjust
Brightness adjust
Color control
Demodulation axis adjust
Demodulation gain adjust
RGB matrix
OSD data insert (RGB each 2 bit)
White balance adjust
γ correction (RGB independence)
8 bit high speed A/D converter (3 ch)
I2C bus control
• Specification
Clock frequency 20 MHz to 100 MHz
Supply Voltage 3.3 V 0.165 V
Package 208-pin QFP ( 28 mm, 0.5 mm pitch)
Applications
Pixel display device such as PDP,LCD
SDB00108AEM
2
MN82860
Block diagram
,
System Configuration
,
IP Conversion
SDB00108AEM
3
Request for your special attention and precautions in using the technical information
and semiconductors described in this material
(1) An export permit needs to be obtained from the competent authorities of the Japanese Government if any of
the products or technical information described in this material and controlled under the "Foreign Exchange
and Foreign Trade Law" is to be exported or taken out of Japan.
(2) The technical information described in this material is limited to showing representative characteristics and
applied circuits examples of the products. It neither warrants non-infringement of intellectual property right
or any other rights owned by our company or a third party, nor grants any license.
(3) We are not liable for the infringement of rights owned by a third party arising out of the use of the technical
information as described in this material.
(4) The products described in this material are intended to be used for standard applications or general elec-
tronic equipment (such as office equipment, communications equipment, measuring instruments and house-
hold appliances).
Consult our sales staff in advance for information on the following applications:
• Special applications (such as for airplanes, aerospace, automobiles, traffic control equipment, combus-
tion equipment, life support systems and safety devices) in which exceptional quality and reliability are
required, or if the failure or malfunction of the products may directly jeopardize life or harm the human
body.
• Any applications other than the standard applications intended.
(5) The products and product specifications described in this material are subject to change without notice for
modification and/or improvement. At the final stage of your design, purchasing, or use of the products,
therefore, ask for the most up-to-date Product Standards in advance to make sure that the latest specifica-
tions satisfy your requirements.
(6) When designing your equipment, comply with the guaranteed values, in particular those of maximum rat-
ing, the range of operating power supply voltage, and heat radiation characteristics. Otherwise, we will not
be liable for any defect which may arise later in your equipment.
Even when the products are used within the guaranteed values, take into the consideration of incidence of
break down and failure mode, possible to occur to semiconductor products. Measures on the systems such
as redundant design, arresting the spread of fire or preventing glitch are recommended in order to prevent
physical injury, fire, social damages, for example, by using the products.
(7) When using products for which damp-proof packing is required, observe the conditions (including shelf life
and amount of time let standing of unsealed items) agreed upon when specification sheets are individually
exchanged.
(8) This material may be not reprinted or reproduced whether wholly or partially, without the prior written
permission of Matsushita Electric Industrial Co., Ltd.
2003 SEP
相关型号：
©2020 ICPDF网 联系我们和版权申明