SP2-L2-DC12V [PANASONIC]
Power/Signal Relay, DPDT, Latched, 0.025A (Coil), 12VDC (Coil), 300mW (Coil), 10A (Contact), 30VDC (Contact), DC Input, AC/DC Output, Socket Mount, ROHS COMPLIANT;
| 型号： | SP2-L2-DC12V |
| 厂家： | 
PANASONIC |
| 描述： | Power/Signal Relay, DPDT, Latched, 0.025A (Coil), 12VDC (Coil), 300mW (Coil), 10A (Contact), 30VDC (Contact), DC Input, AC/DC Output, Socket Mount, ROHS COMPLIANT 光电二极管 继电器 |
| 文件： | 总6页 (文件大小：175K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
2c 15A, 4c 10A polarized
power relays
SP RELAYS
FEATURES
1. Small, slim form factor
4. Latching types also available
1 coil latching and 2 coil latching types
are available. In cases where it was
formerly unavoidable to use plural
relays for large power memory, you
can now use a single SP relay.
5. Strong resistance to vibration and
shock
Our balanced armature technology
well withstands vibration and shocks. It
provides strong resistance to vibration
and shock.
Facilitating the form factor reduction of
devices, the overall height of the relay
package is less than half that of our HP
relay.
2. High sensitivity
The high-efficiency polarized
electromagnetic mechanism in
conjunction with our exclusive spring
alignment method achieves levels of
sensitivity higher than relays that have
been available up to now. For both the
2 Form C and 4 Form C single side
stable and 2 coil latching types, the
150 mW minimum operating power
level allows direct driving by transistor
or chip controllers.
3. High reliability and long life
With a structure that ensures almost
perfectly complete twin contact and
minimal contact bounce, you get
greater reliability than has so far been
provided by power relays.
6. Terminals and mounting boards are
available
TYPICAL APPLICATIONS
1. Electrical power device
2. Robots
3. Railway signal equipment
RoHS compliant
Protective construction: Dust cover type
ASCTB208E 201606-T
–1–
SP
ORDERING INFORMATION
SP
Contact arrangement
2: 2 Form C
4: 4 Form C
Terminal shape
Nil: Plug-in type
P: PC board type
Operating function
Nil: Single side stable
L: 1 coil latching
L2: 2 coil latching
Nominal coil voltage
3, 5, 6, 12, 24, 48 V DC
Notes: 1. PC board type and 1 coil latching type are manufactured by lot upon receipt of order.
2. Certified by UL, CSA and TÜV
TYPES
Contact arrangement
Single side stable
2 coil latching
Part No.
Nominal coil voltage
Part No.
3V DC
5V DC
SP2-DC3V
SP2-DC5V
SP2-DC6V
SP2-DC12V
SP2-DC24V
SP2-DC48V
SP4-DC3V
SP4-DC5V
SP4-DC6V
SP4-DC12V
SP4-DC24V
SP4-DC48V
SP2-L2-DC3V
SP2-L2-DC5V
SP2-L2-DC6V
SP2-L2-DC12V
SP2-L2-DC24V
SP2-L2-DC48V
SP4-L2-DC3V
SP4-L2-DC5V
SP4-L2-DC6V
SP4-L2-DC12V
SP4-L2-DC24V
SP4-L2-DC48V
6V DC
2 Form C
12V DC
24V DC
48V DC
3V DC
5V DC
6V DC
4 Form C
12V DC
24V DC
48V DC
Standard packing (2 Form C): Carton: 20 pcs.; Case: 200 pcs.
Standard packing (4 Form C): Carton: 10 pcs.; Case: 100 pcs.
Note: PC board type and 1 coil latching type are manufactured by lot upon receipt of order.
* Terminal sockets and mounting boards available.
RATING
1. Coil data
1) Single side stable
Nominal operating
current
[ 10%] (at 20°C 68°F)
Nominal coil
voltage
Pick-up voltage
(at 20°C 68°F)
Drop-out voltage
(at 20°C 68°F)
Coil resistance
[ 10%] (at 20°C 68°F)
Nominal operating
Max. applied voltage
power
3V DC
5V DC
100mA
60.2mA
50mA
30Ω
83Ω
120Ω
480Ω
1,920Ω
7,700Ω
70%V or less of
nominal voltage
(Initial)
10%V or more of
nominal voltage
(Initial)
6V DC
150%V of
nominal voltage
300mW
12V DC
24V DC
48V DC
25mA
12.5mA
6.2mA
2) 2 coil latching
Nominal operating
current
[ 10%] (at 20°C 68°F)
Coil resistance
[ 10%] (at 20°C 68°F)
Nominal operating
power
Nominal coil
voltage
Set voltage
(at 20°C 68°F)
Reset voltage
(at 20°C 68°F)
Max. applied voltage
Set coil
100mA
60.2mA
50mA
Reset coil
100mA
60.2mA
50mA
Set coil
30Ω
83Ω
120Ω
480Ω
1,920Ω
7,680Ω
Reset coil
30Ω
83Ω
120Ω
480Ω
Set coil
Reset coil
3V DC
5V DC
70%V or less of
nominal voltage
(Initial)
70%V or less of
nominal voltage
(Initial)
6V DC
150%V of
nominal voltage
300mW
300mW
12V DC
24V DC
48V DC
25mA
25mA
12.5mA
6.2mA
12.5mA
6.2mA
1,920Ω
7,680Ω
ASCTB208E 201606-T
–2–
SP
2. Specifications
Characteristics
Item
Specifications
2 Form C: Approx. 0.392 N (40 g 1.41 oz), 4 Form C: Approx. 0.196 N (20 g 0.71 oz)
2 Form C, 4 Form C
Initial contact pressure
Arrangement
Contact
Contact resistance (Initial)
Max. 30 mΩ (By voltage drop 6 V DC 1A)
Contact material
Stationary contact: Au flashed AgSnO2 type, Movable contact: AgSnO2 type
2 Form C: 15 A 250 V AC, 4 Form C: 10 A 250 V AC
2 Form C: 3,750 VA, 300 W, 4 Form C: 2,500 VA, 300 W
2 Form C, 4 Form C: 250 V AC, 30 V DC (48V DC: Max. 2A)
2 Form C: 15 A (AC) 10 A (DC), 4 Form C: 10 A
300mW (Single side stable, 2 coil latching)
Nominal switching capacity (resistive load)
Max. switching power (resistive load)
Max. switching voltage
Rating
Max. switching current
Nominal operating power
Min. switching capacity (reference value)*1
100 mA 5V DC
Insulation resistance (Initial)
(25°C, 50% relative humidity)
Min. 1,000MΩ (at 500V DC)
Measurement at same location as “Breakdown voltage” section.
Between open contacts
1,500 Vrms for 1 min. (Detection current: 10 mA)
3,000 Vrms for 1 min. (Detection current: 10 mA)
3,000 Vrms for 1 min. (Detection current: 10 mA)
Breakdown voltage
Between contact and coil
(Initial)
Electrical
Between contact sets
characteristics
Max. 30 ms [Max. 30 ms]
(Nominal coil voltage applied to the coil, excluding contact bounce time.)
Operate time [Set time] (at 20°C 68°F) (Initial)
Max. 20 ms [Max. 30 ms]
Release time [Reset time] (at 20°C 68°F) (Initial)
(Nominal coil voltage applied to the coil, excluding contact bounce time.) (without diode)
Min. 392 m/s2 (Half-wave pulse of sine wave: 11 ms; detection time: 10μs.)
Min. 980 m/s2 (Half-wave pulse of sine wave: 6 ms.)
Functional
Shock resistance
Destructive
Mechanical
characteristics
Functional
Vibration resistance
Destructive
10 to 55 Hz at double amplitude of 3 mm (Detection time: 10μs.)
10 to 55 Hz at double amplitude of 3 mm
Mechanical
Min. 5×107 (at 180 times/min.)
2 Form C:
Min. 105 (15 A 250 V AC [at 20 times/min.]), Min. 105 (10 A 30 V DC [at 20 times/min.])
4 Form C:
Expected life
Electrical (resistive load)
Min. 105 (15 A 250 V AC [at 20 times/min.]), Min. 105 (10 A 30 V DC [at 20 times/min.])
Ambient temperature: –50°C to +60°C –58°F to +140°F;
Conditions for operation, transport and storage*2
Max. operating speed
Humidity: 5 to 85% R.H. (Not freezing and condensing at low temperature)
Conditions
Unit weight
20 times/min. (at rated load)
2 Form C: 50 g 1.76 oz; 4 Form C: 65 g 2.29 oz
Notes: *1. This value can change due to the switching frequency, environmental conditions, and desired reliability level, therefore it is recommended to check this with the
actual load.
*2. The upper limit of the ambient temperature is the maximum temperature that can satisfy the coil temperature rise value. Refer to Usage, transport and storage
conditions in NOTES.
REFERENCE DATA
1.-(1) Coil temperature rise (2 Form C type)
Tested sample: SP2-DC24V
1.-(2) Coil temperature rise (4 Form C type)
Tested sample: SP4-DC24V
Ambient temperature: 27 to 29°C 81 to 84°F
50
50
40
30
20
10
0
40
15 A
10 A
10 A
5 A
30
5 A
0 A
20
10
0
0 A
19.2 21.6 24.0 26.4 28.8 31.2 33.6 36.0
Coil applied voltage, V
19.2 21.6 24.0 26.4 28.8 31.2 33.6 36.0
Coil applied voltage, V
ASCTB208E 201606-T
–3–
SP
2. Electrical life (SP2, 15 A 250 V AC resistive load)
Change of pick-up and drop-out voltage
Change of contact resistance
N.C.
N.O.
Pick-up voltage
15
10
5
15
10
5
Max.
x
Max.
Min.
x
Max.
x
Drop-out voltage
Min.
Min.
Max.
x
Min.
0
0
1
2
3
4
5
6
7
8
9
10
1
2
3
4
5
6
7
8
9
10
No. of operations, ×104
No. of operations, ×104
3. Electrical life (SP4, 10 A 250 V AC resistive load)
Change of pick-up and drop-out voltage
Change of contact resistance
N.C.
N.O.
50
40
30
20
Pick-up voltage
15
10
5
Max.
x
Min.
Max.
Drop-out voltage
Max.
x
Min.
x
10
0
Min.
0
1
2
3
4
5
6
7
8
9
10
1
2
3
4
5
6
7
8
9
10
No. of operations, ×104
No. of operations, ×104
The CAD data of the products with a CAD Data mark can be downloaded from: http://industrial.panasonic.com/ac/e/
DIMENSIONS (mm inch)
2 Form C
1) Plug-in terminal
2) PC board type
CAD Data
CAD Data
External dimensions
External dimensions
Schematic (Bottom view)
Single side stable type
1
50
.039
1.969
1
5
6
7
0.5
20.5
.807
.020
1.5
.059
10
.394
25.6
15.24
.600
1.008
2
8
9
10
2
0.5
.020
.079
10.16 10.16 10.16 10.16
.400 .400 .400 .400
15.24
.600
(Deenergized condition)
5.5
.217
2 coil latching type
General tolerance: 0.3 .012
1
2
5
6
9
7
3
4
20.5
.807
PC board pattern (Bottom view)
SET
RST
1.5
.059
10-2.5 dia.
10-.098 dia.
8
10
7.15
.281
(Reset condition)
10.16 10.16 10.16 10.16
.400 .400 .400 .400
FASTON #187
15.24
.600
4.75
.187
General tolerance: 0.3 .012
10.16 10.16 10.16 10.16
.400 .400 .400 .400
Tolerance: 0.1 .004
Diagram shows the “reset” position when terminals 3 and 4 are energized. Energize terminals 1 and 2 to transfer contacts.
ASCTB208E 201606-T
–4–
SP
4 Form C
1) Plug-in terminal
2) PC board type
CAD Data
CAD Data
External dimensions
External dimensions
Schematic (Bottom view)
Single side stable type
11 12 13
1
50
.039
1.969
0.5
.020
20.5
.807
7.62
.300
1.5
1
5
6
7
.059
2
.079
0.5
10
36.8
15.24
.600
.020
.394
1.449
10.16 10.16 10.16 10.16
.400 .400 .400 .400
15.24
.600
5.5
2
8
9
10
7.62
.300
7.62
.300
.217
7.62
.300
14 15 16
General tolerance: 0.3 .012
(Deenergized condition)
PC board pattern (Bottom view)
20.5
.807
2 coil latching type
16-2.5 dia.
16-.098 dia.
1.5
11 12 13
.059
7.15
.281
1
2
5
6
9
7
3
4
7.62
.300
SET
10.16 10.16 10.16 10.16
.400 .400 .400 .400
4.75
.187
RST
15.24
.600
8
10
7.62
.300
14 15 16
General tolerance: 0.3 .012
(Reset condition)
10.16 10.16 10.16 10.16
.400 .400 .400 .400
Tolerance: 0.1 .004
Diagram shows the “reset” position when terminals 3 and 4 are energized. Energize terminals 1 and 2 to transfer contacts.
SAFETY STANDARDS
Item
UL (Recognized)
CSA (Certified)
Contact rating
TÜV (Certified)
File No.
Contact rating
File No.
LR26550
File No.
B 11 08
13461 308
Contact rating
15A 250V AC (cosφ=1.0)
10A 30V DC (0ms)
—
Cycles
105
105
—
2 Form C E43028
15A 250V AC General Use
1/2HP 125, 250V AC
10A 30V DC
15A 250V AC General Use
1/2HP 125, 250V AC
10A 30V DC
4 Form C E43028
10A 250V AC General Use
1/3HP 125, 250V AC
10A 30V DC
LR26550
10A 250V AC General Use
1/3HP 125, 250V AC
10A 30V DC
B 11 08
13461 308
10A 250V AC (cosφ=1.0)
10A 30V DC (0ms)
—
105
105
—
NOTES
1. For cautions for use, please read
“GENERAL APPLICATION
GUIDELINES”.
ASCTB208E 201606-T
–5–
相关型号：
UL1042
UL1042 - Uk砤d zr體nowa縪nego mieszacza iloczynowegoWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
ETC
ZXFV201
QUAD VIDEO AMPLIFIERWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
ZETEX
ZXFV201N14
IC-SM-VIDEO AMPWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
ZETEX
ZXFV201N14TA
QUAD VIDEO AMPLIFIERWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
ZETEX
ZXFV201N14TC
QUAD VIDEO AMPLIFIERWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
ZETEX
Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
ETC
Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
ETC
Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
ETC
Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
ETC
ZXFV302N16
IC-SM-4:1 MUX SWITCHWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
ETC
ZXFV4089
VIDEO AMPLIFIER WITH DC RESTORATIONWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
ZETEX
Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
ZETEX
©2020 ICPDF网 联系我们和版权申明