TN2-H-5V-3 [PANASONIC]
Power/Signal Relay, DPDT, Momentary, 0.028A (Coil), 5VDC (Coil), 140mW (Coil), 1A (Contact), 110VDC (Contact), DC Input, AC/DC Output, Through Hole-Straight Mount;型号: | TN2-H-5V-3 |
厂家: | PANASONIC |
描述: | Power/Signal Relay, DPDT, Momentary, 0.028A (Coil), 5VDC (Coil), 140mW (Coil), 1A (Contact), 110VDC (Contact), DC Input, AC/DC Output, Through Hole-Straight Mount 光电二极管 |
文件: | 总5页 (文件大小:105K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
SLIM POLARIZED RELAY
FEATURES
TN RELAYS
5.6
.220
14
.551
• Small header area makes higher
density mounting possible
• High sensitivity: 140 mW nominal
operating power (single side stable
3-12 V type)
• Surge voltage withstand: 1500 V FCC
Part 68
• Self-clinching terminal also available
9.8
.386
mm inch
RoHS Directive compatibility information
http://www.nais-e.com/
SPECIFICATIONS
Contact
Characteristics
Arrangement
2 Form C
60 mΩ
Initial insulation resistance*1
Min. 1,000 MΩ (at 500 V DC)
750 Vrms for 1 min.
(Detection current: 10 mA)
Initial contact resistance, max.
(By voltage drop 6 V DC 1A)
Between open
contacts
Initial
breakdown
voltage
Contact material
Gold-clad silver
Between contact and
coil
1,000 Vrms for 1 min.
(Detection current: 10 mA)
Nominal switching capacity
(resistive load)
1 A 30 V DC,
0.5 A 125 V AC
1,000 Vrms for 1 min.
(Detection current: 10 mA)
Between contact sets
Max. switching power
(resistive load)
30 W, 62.5 VA
FCC surge voltage between open
contacts
Temperature rise*2 (at 20°C)
Operate time [Set time]*3 (at 20°C)
Release time [Reset time]*4
1,500 V
Rating
Max. switching voltage
110 V DC,125 V AC
1 A
Max. 50°C
Max. 3 ms [Max. 3 ms]
Max. switching current
Min. switching capacity
(Reference value)#1
10 µA 10 mV DC
Max. 3 ms [Max. 3 ms]
(at 20°C)
140 mW (3 to 12 V DC)
200 mW (24 V DC)
300 mW (48 V DC)
Single side stable
Nominal
Functional*5
Destructive*6
Min. 490 m/s2 {50G}
Min. 980 m/s2 {100G}
Shock resistance
operating
1 coil latching
power
100 mW (3 to 12 V DC)
150 mW (24 V DC)
176.4 m/s2 {18G}, 10 to 55 Hz
at double amplitude of 3 mm
294 m/s2 {30G}, 10 to 55 Hz
at double amplitude of 5 mm
Functional*7
Vibration resistance
200 mW (3 to 12 V DC)
300 mW (24 V DC)
2 coil latching
Destructive
Mechanical (at 180 cpm)
108
Conditions for
Ambient
–40°C to +70°C
–40°F to +158°F
Expected
life (min.
operations)
1 A 30 V DC
resistive load
operation, transport temperature
2 × 105
and storage*8
Electrical
(at 20 cpm)
(Not freezing and
condensing at low
0.5 A 125V AC
resistive load
105
Humidity
5 to 85% R.H.
temperature)
Note:
Unit weight
Approx. 1.5 g .053 oz
#1 This value can change due to the switching frequency, environmental conditions,
and desired reliability level, therefore it is recommended to check this with the
actual load. (SX relays are available for low level load switching [10V DC, 10mA
max. level])
Remarks
* Specifications will vary with foreign standards certification ratings.
*1 Measurement at same location as "Initial breakdown voltage" section.
*2 By resistive method, nominal voltage applied to the coil; contact carrying current:
1 A.
*5 Half-wave pulse of sine wave: 11 ms; detection time: 10 µs.
*6 Half-wave pulse of sine wave: 6 ms.
*7 Detection time: 10 µs.
*8 Refer to 6. Conditions for operation, transport and storage mentioned in
AMBIENT ENVIRONMENT .
*3 Nominal voltage applied to the coil, excluding contact bounce time.
*4 Nominal voltage applied to the coil, excluding contact bounce time without diode.
All Rights Reserved © COPYRIGHT Matsushita Electric Works, Ltd.
TN
ORDERING INFORMATION
Ex. TN
2
L2
H
12V
Contact arrangement
2: 2 Form C
Operating function
Terminal shape
Coil voltage(DC)
Nil: Single side stable Nil: Standard PC board terminal
L: 1 coil latching
L2: 2 coil latching
3,4.5,5,6,9,12,
24,48*V
H: Self-clinching terminal
*48 V coil type: Single side stable only
Note:
AgPd stationary contact types available for high resistance against contact sticking.
When ordering, please add suffix “–3” like TN2–12V–3.
TYPES AND COIL DATA (at 20°C 68°F)
1. Single side stable
Part No.
Nominal
operating
current,
Nominal
operating
power,
mW
Max.
allowable
voltage,
V DC
Nominal
voltage,
V DC
Pick-up
voltage,
V DC (max.)
Drop-out
voltage,
V DC (min.)
Coil
resistance,
Ω ( 10%)
Standard PC
Self-clinching
terminal
board terminal
mA ( 10%)
TN2-3 V
TN2-4.5 V
TN2-5 V
TN2-6 V
TN2-9 V
TN2-12 V
TN2-24 V
TN2-48 V
TN2-H-3 V
TN2-H-4.5 V
TN2-H-5 V
TN2-H-6 V
TN2-H-9 V
TN2-H-12 V
TN2-H-24 V
TN2-H-48 V
3
4.5
5
2.25
3.38
3.75
4.5
6.75
9
0.3
0.45
0.5
0.6
0.9
1.2
2.4
4.8
46.7
31.1
28.1
23.3
15.5
11.7
8.3
64.3
145
140
140
140
140
140
140
200
300
4.5
6.7
7.5
9
178
6
257
9
579
13.5
18
12
24
48
1,028
2,880
7,680
18
36
36
6.25
57.6
2. 1 Coil latching
Part No.
Nominal
operating
current,
Nominal
operating
power,
mW
Max.
allowable
voltage,
V DC
Nominal
voltage,
V DC
Coil
resistance,
Ω ( 10%)
Set voltage, Resetvoltage,
Standard PC
Self-clinching
terminal
V DC (max.)
V DC (max.)
board terminal
mA ( 10%)
TN2-L-3 V
TN2-L-4.5 V
TN2-L-5 V
TN2-L-6 V
TN2-L-9 V
TN2-L-12 V
TN2-L-24 V
TN2-L-H-3 V
TN2-L-H-4.5 V
TN2-L-H-5 V
TN2-L-H-6 V
TN2-L-H-9 V
TN2-L-H-12 V
TN2-L-H-24 V
3
4.5
5
2.25
3.38
3.75
4.5
2.25
3.38
3.75
4.5
33.3
22.2
20
90
100
100
100
100
100
100
150
4.5
6.7
7.5
9
202.5
250
6
16.7
11.1
8.3
360
9
6.75
9
6.75
9
810
13.5
18
12
24
1,440
3,840
18
18
6.3
36
3. 2 Coil latching
Part No.
Nominal
operating
current,
Nominal
operating
power,
mW
Max.
allowable
voltage,
V DC
Nominal
voltage,
V DC
Coil
resistance,
Ω ( 10%)
Set voltage, Resetvoltage,
Standard PC
Self-clinching
terminal
V DC (max.)
V DC (max.)
board terminal
mA ( 10%)
TN2-L2-3 V
TN2-L2-4.5 V
TN2-L2-5 V
TN2-L2-6 V
TN2-L2-9 V
TN2-L2-12 V
TN2-L2-24 V
Notes:
TN2-L2-H-3 V
TN2-L2-H-4.5 V
TN2-L2-H-5 V
TN2-L2-H-6 V
TN2-L2-H-9 V
TN2-L2-H-12 V
TN2-L2-H-24 V
3
4.5
5
2.25
3.38
3.75
4.5
2.25
3.38
3.75
4.5
66.7
44.4
40
45
101.2
125
200
200
200
200
200
200
300
4.5
6.7
7.5
9
6
33.3
22.2
16.7
12.5
180
9
6.75
9
6.75
9
405
13.5
18
12
24
720
18
18
1,920
28.8
1. Specified value of the pick-up, drop-out, set and reset voltage is with the condition of square wave coil pulse.
2. Standard packing: Tube: 50 pcs.; Case: 1,000 pcs.
3. In case of 5 V drive circuit, it is recommended to use 4.5 V type relay.
4. AgPd stationary contact types available for high resistance against contact sticking. When ordering, please add suffix "–3" like TN2-12V-3.
All Rights Reserved © COPYRIGHT Matsushita Electric Works, Ltd.
TN
mm inch
DIMENSIONS
PC board pattern (Copper-side view)
Standard PC board terminal
14
551
5.6
.220
10.16
.400
2.54
.100
9.5
9.8
.374
.386
2.54
.100
3.5
.138
10-1.0 dia. hole
10-.039 dia. hole
0.25
.010
Tolerance: 0.1 .004
2.54
.100
0.5
.020
1.385
.055
2.54
.100
Schematic (Bottom view)
• 1-coil latching
Self-clinching terminal
• Single side stable
• 2-coil latching
(Reset condition)
14
5.6
.220
(Deenergized condition)
(Reset condition)
551
9.5
1 2 3 4 5
9.8
.374
1 2 3 4 5
1 2 3 4 5
.386
3.5
.138
10 9 8 7 6
10 9 8 7 6
Direction indication*
10 9 8 7 6
Direction indication*
0.25
.010
2.54
.100
0.5
Direction indication*
1.385
2.54
.100
.020
.055
*Orientation stripe located on top of relay
General tolerance: 0.3 .012
REFERENCE DATA
1. Maximum switching capacity
2. Life curve
3. Mechanical life
Tested sample: TN2-12V, 10 pcs.
100
90
80
DC load (cosϕ=1)
AC load (cosϕ=1)
30 V DC resistive load
100
1.0
70
Pick-up voltage
Max.
Min.
60
50
40
0.5
0.4
125 V AC resistive load
10
0.3
30
20
Drop-out voltage
Max.
Min.
0.2
10
0
0
1.0
Switching current, A
10
30
0.5
100
No. of operations, ×10
100
200
1,000
10,000
4
Switching voltage,V
4. Electrical life (DC load)
5. Coil temperature rise
Tested sample: TN2-12V, 10 pcs.
Condition: 1 A 30 V DC resistive load, 20 cpm
Tested sample: TN2-12V
Point measured: Inside the coil
Ambient temperature: Room temperature (25° to
26°C), 70°C (77° to 79°F), 158°F
Change of pick-up and drop-out voltage
Change of contact resistance
70
100
100
Carrying current
0 A (Room temp.)
1 A (Room temp.)
0 A (70°C)
90
80
70
60
50
90
60
50
40
30
20
10
80
Pick-up voltage
1 A (70°C)
Max.
Min.
70
60
50
Terminal No.2–3–4
Terminal No.7–8–9
40
30
20
10
0
40
30
20
10
0
Drop-out voltage
Max.
Min.
0
5
10
15
20
5
10
15
20
80 90 100 110 120 130 140 150
Coil applied voltage, %V
4
4
No. of operations, ×10
No.of operations, ×10
All Rights Reserved © COPYRIGHT Matsushita Electric Works, Ltd.
TN
6. Operate/release time characteristics
7. Set/reset time characteristics
8. Distribution of pick-up and drop-out voltages
Tested sample: TN2-12V, 5 pcs.
Tested sample: TN2-L2-12V, 5 pcs.
Tested sample: TN2-12V, 40 pcs.
6
6
30
Set time
Reset time
5
4
3
5
4
3
2
1
0
Pick-up voltage
20
Drop-out voltage
Operate time
2
10
Max.
Min.
Max.
Min.
Max.
Min.
1
0
Release time
80
90
100
110
120
0
10 20 30 40 50 60 70 80 90 100
Ratio against the rated voltage, %V
80
90
100
110
120
Coil applied voltage, %V
Coil applied voltage, %V
9. Distribution of set and reset voltage
Tested sample: TN2-L2-12V, 32 pcs.
10. Ambient temperature characteristics
Tested sample: TN2-12V, 5 pcs.
11. Distribution of contact resistance
Tested sample: TN2-12V, 38 pcs. (38×4 contacts)
40
30
1
2
3
4
5
x
Drop-out
40
Set voltage
voltage
30
Reset voltage
Terminal
No.
6
7
8
9
10
30
20
10
7,8,9
Side
Terminal No.
2,3,4 side
20
x
20
10
10
0
Pick-up voltage
20 40 60 80
–40 –20 –10
Ambient
temperature, °C
–10
–20
–30
–40
0
10 20 30 40 50 60 70 80 90 100
Ratio against the rated voltage, %V
0
30
40
50
Contact resistance,mΩ
12-(1). Malfunctional shock (single side stable)
Tested sample: TN2-12V, 6 pcs.
12-(2). Malfunctional shock (latching)
Tested sample: TN2-L2-12V, 6 pcs.
Deenergized condition
Energized condition
Deenergized condition
Energized condition
Y
Y
2
2
980m/s
980m/s
X
X
X
X
,
,
X
X
Z
Z
2
2
2
2
980m/s
980m/s
980m/s
980m/s
,
,
,
,
X
X
Z
Z
2
2
2
2
980m/s
980m/s
980m/s
980m/s
2
2
980m/s
,
980m/s
,
Y
Y
13-(1). Influence of adjacent mounting
13-(2). Influence of adjacent mounting
10
10
ON
ON
ON
ON
Pick-up voltage
Pick-up voltage
0
0
–10
–10
ON
ON
OFF OFF
OFF OFF
10
0
20
10
0
Drop-out voltage
Drop-out voltage
OFF
OFF
–10
0
5
0
5
.197
.197
Inter-relay distance , mm inch
Inter-relay distance , mm inch
All Rights Reserved © COPYRIGHT Matsushita Electric Works, Ltd.
TN
14. Actual load test
(35 mA 48 V DC wire spring relay load)
Change of pick-up and drop-out voltage
Change of contact resistance
100
100
90
80
70
60
50
90
80
Circuit
Pick-up voltage
70
Max.
Min.
500Ω
60
50
0.1
3
2
µF
48 V
DC
0.1
µF
Terminal No. 2–3
40
30
20
10
40
Max.
Min.
Drop-out voltage
500Ω
Max.
Min.
30
20
10
Wire spring relay Circuit diagram
0
10
20
30
40
50
0
10
20
30
40
50
4
4
No. of operations, ×10
No. of operations,×10
15-(1). High-frequency characteristics
15-(2). High-frequency characteristics
15-(3). High-frequency characteristics
Tested sample: TN2-xxV
Isolation characteristics
Tested sample: TN2-xxV
Insertion loss characteristics
Tested sample: TN2-xxV
V.S.W.R.
2.2
2.1
2.0
1.6
1.4
1.2
1.0
1.9
1.8
1.7
1.6
1.5
100
Terminal No. 7–8–9
Terminal No. 2–3–4
0.8
50
0.6
1.4
Terminal No. 2-3-4
Terminal No. 2–3–4
1.3
0.4
Terminal No. 7-8-9
1.2
Terminal No. 7–8–9
0.2
1.1
1.0
10
100
1000
10
100
1000
10
100
1000
Frequency, MHz
Frequency, MHz
Frequency, MHz
For Cautions for Use, see Relay Technical Information.
All Rights Reserved © COPYRIGHT Matsushita Electric Works, Ltd.
相关型号:
TN2-H-6V
Power/Signal Relay, DPDT, Momentary, 0.023A (Coil), 6VDC (Coil), 140mW (Coil), 1A (Contact), 110VDC (Contact), DC Input, AC/DC Output, Through Hole-Straight Mount, ROHS COMPLIANT
PANASONIC
TN2-H-6V-3
Power/Signal Relay, DPDT, Momentary, 0.023A (Coil), 6VDC (Coil), 140mW (Coil), 1A (Contact), 110VDC (Contact), DC Input, AC/DC Output, Through Hole-Straight Mount
PANASONIC
TN2-H-9V-3
Power/Signal Relay, DPDT, Momentary, 0.016A (Coil), 9VDC (Coil), 140mW (Coil), 1A (Contact), 110VDC (Contact), DC Input, AC/DC Output, Through Hole-Straight Mount
PANASONIC
TN2-L-12V
Power/Signal Relay, DPDT, Latched, 0.008A (Coil), 12VDC (Coil), 100mW (Coil), 1A (Contact), 110VDC (Contact), DC Input, AC/DC Output, Through Hole-Straight Mount, ROHS COMPLIANT
PANASONIC
©2020 ICPDF网 联系我们和版权申明