TRC215P-BF [PANASONIC]
Rocker Switch;
PANASONIC 
Automation Controls Catalog
15A HIGH SNAP SWITCHES
T-15 SERIES
SWITCHES
TOGGLE, ROCKER AND
PUSH-BUTTON TYPES
FEATURES
Square
hole
12 dia.
1. Series now includes rocker and
push-button switches.
• Wire lead type
Toggle Rocker
Push-
Furthermore, a cover is provided for the
terminals to keep out water and oil that
enters from the panel.
button
Based on the well-established T-15
Series switch, the mechanism is kept as
is and a rocker type and push-button type
have been added to the series. (Note that
the push-button type is rated at 10 A.)
2. Sealed type added for use in
different environments.
(Panel front: IP67*; Inside of panel: IP67)
Packing is used where parts join and an
O-ring is used to seal moving parts. New
to the series, this type can be used in
harsh environments such as those with
water, oil, dust, and gas.
Sealing with a cover
and epoxy resin.
• Panel-sealed type
Entry of water, oil, dust and gas from the
front of the panel is prevented.
(Panel front: IP67*; Inside of panel: IP40)
Remark: The asterisk in “Panel front: IP67*” means
this only applies to toggle and push-button
types.
RoHS compliant
The panel surface for the rocker type is IP64.
Please see NOTES 1 and 2 regarding use of
the sealed type.
Prevention of water, oil,
dust, and gases from
entering through the
panel with O-rings
3. Rubber cap also available in silicon
type for excellent weather resistance.
• 5 colors available so you can distinguish
switches by purpose.
<Example>
Black: For main power supply
Grey: For setting and switching
Red: For resetting
• With a usable ambient temperature
range of –25°C to +85°C, use is possible
in environments that require resistance
against heat and cold.
• Terminal-sealed type
Both switch body and terminals have
been sealed to protect from dust and gas
that enters from the panel.
(Panel front: IP67*; Inside of panel: IP60)
Sealing the joint part
of switch body with
packing rubber.
Terminal area is sealed
with epoxy resin.
ASSORTMENT
Sealed type
Number of pole
2P 3P
Shape of terminal
.250 Quick-
Standard
Kind of actuator
type
Panel-
sealed
type
Terminal-
sealed
type
Wireleads
type
Solder
terminal
Screw
1P
4P
connect
terminal
Wire lead
terminal
Toggle type
Rocker type
Available
Available
Available
Available
Available
Available
Available
—
Available
Available
—
Available
Available
Available
Available Available*1 Available*1 Available
Available Available*1 Available*2
Available
Available
—
—
—
—
Available
Available
Available
Available
—
—
Available*2
Push-button type Available
—
Remarks: *1: Only standard type
*2: Only wire leads type
industrial.panasonic.com/ac/e/
© Panasonic Corporation 2013
AECTB5E 201309-T1
2013.09
–1–
T15
TOGGLE PRODUCT TYPES
1. Standard type
1) Solder terminal and .250 Quick-connect terminal
Solder terminal
Product No.
T115A-F
T115D-F
T115E-F
T115F-F
T115G-F
T115H-F
T215K-F
T215N-F
T215P-F
T215R-F
T215S-F
T215T-F
.250 Quick-connect terminal
Product No.
T115A-AF
T115D-AF
T115E-AF
T115F-AF
Kind of operation
Number of poles
< >: Momentary position
ON-OFF
ON-ON
ON-OFF-ON
1-pole
ON-<ON>
<ON>-OFF-<ON>
ON-OFF-<ON>
ON-OFF
T115G-AF
T115H-AF
T215K-AF
T215N-AF
T215P-AF
T215R-AF
T215S-AF
T215T-AF
ON-ON
ON-OFF-ON
2-pole
ON-<ON>
<ON>-OFF-<ON>
ON-OFF-<ON>
ON-OFF
T315K-F
T315N-F
T315P-F
T415K-F
T415N-F
T415P-F
T315K-AF
T315N-AF
T315P-AF
T415K-AF
T415N-AF
T415P-AF
3-pole
4-pole
ON-ON
ON-OFF-ON
ON-OFF
ON-ON
ON-OFF-ON
2) Screw terminal
Number of poles
Screw terminal
Product No.
T115A-SF
T115D-SF
T115E-SF
T115F-SF
T115G-SF
T115H-SF
T215K-SF
T215N-SF
T215P-SF
T215R-SF
T215S-SF
T215T-SF
T315K-SF
T315N-SF
T315P-SF
T415K-SF
T415N-SF
T415P-SF
Kind of operation
< >: Momentary position
ON-OFF
ON-ON
ON-OFF-ON
ON-<ON>
1-pole
2-pole
<ON>-OFF-<ON>
ON-OFF-<ON>
ON-OFF
ON-ON
ON-OFF-ON
ON-<ON>
<ON>-OFF-<ON>
ON-OFF-<ON>
ON-OFF
3-pole
4-pole
ON-ON
ON-OFF-ON
ON-OFF
ON-ON
ON-OFF-ON
Remark: Standard installation accessories are included with the product.
Panasonic Corporation Automation Controls Buisiness Division
industrial.panasonic.com/ac/e/
© Panasonic Corporation 2013
AECTB5E 201309-T1
–2–
T15
2. Panel-sealed type
1) Solder terminal
Solder terminal
Product No.
TP115A-F
TP115D-F
TP115E-F
TP115F-F
TP115G-F
TP115H-F
TP215K-F
TP215N-F
TP215P-F
TP215R-F
TP215S-F
TP215T-F
Kind of operation
< >: Momentary position
Number of poles
ON-OFF
ON-ON
ON-OFF-ON
ON-<ON>
1-pole
<ON>-OFF-<ON>
ON-OFF-<ON>
ON-OFF
ON-ON
ON-OFF-ON
ON-<ON>
2-pole
<ON>-OFF-<ON>
ON-OFF-<ON>
2) Screw terminal
Number of poles
Screw terminal
Product No.
TP115A-SF
TP115D-SF
TP115E-SF
TP115F-SF
TP115G-SF
TP115H-SF
TP215K-SF
TP215N-SF
TP215P-SF
TP215R-SF
TP215S-SF
TP215T-SF
Kind of operation
< >: Momentary position
ON-OFF
ON-ON
ON-OFF-ON
ON-<ON>
1-pole
2-pole
<ON>-OFF-<ON>
ON-OFF-<ON>
ON-OFF
ON-ON
ON-OFF-ON
ON-<ON>
<ON>-OFF-<ON>
ON-OFF-<ON>
Remark: Of the standard installation accessories that come with the product, the front hex nut and lock washer are included.
3.Terminal-sealed type
1) Solder terminal
Solder terminal
Product No.
TD115A-F
TD115D-F
TD115E-F
TD115F-F
TD115G-F
TD115H-F
TD215K-F
TD215N-F
TD215P-F
TD215R-F
TD215S-F
TD215T-F
Kind of operation
< >: Momentary position
Number of poles
ON-OFF
ON-ON
ON-OFF-ON
ON-<ON>
1-pole
<ON>-OFF-<ON>
ON-OFF-<ON>
ON-OFF
ON-ON
ON-OFF-ON
ON-<ON>
2-pole
<ON>-OFF-<ON>
ON-OFF-<ON>
Remark: Of the standard installation accessories that come with the product, the front hex nut and lock washer are included.
Panasonic Corporation Automation Controls Buisiness Division
industrial.panasonic.com/ac/e/
© Panasonic Corporation 2013
AECTB5E 201309-T1
–3–
T15
2) Screw terminal
Number of poles
Screw terminal
Product No.
TD115A-SF
TD115D-SF
TD115E-SF
TD115F-SF
TD115G-SF
TD115H-SF
TD215K-SF
TD215N-SF
TD215P-SF
TD215R-SF
TD215S-SF
TD215T-SF
Kind of operation
< >: Momentary position
ON-OFF
ON-ON
ON-OFF-ON
ON-<ON>
1-pole
2-pole
<ON>-OFF-<ON>
ON-OFF-<ON>
ON-OFF
ON-ON
ON-OFF-ON
ON-<ON>
<ON>-OFF-<ON>
ON-OFF-<ON>
Remark: Of the standard installation accessories that come with the product, the front hex nut and lock washer are included.
4. Wire lead type
Wire lead type
Product No.
TC115A-F
TC115D-F
TC115E-F
TC115F-F
TC115G-F
TC115H-F
TC215K-F
TC215N-F
TC215P-F
TC215R-F
TC215S-F
TC215T-F
Kind of operation
< >: Momentary position
Number of poles
1-pole
ON-OFF
ON-ON
ON-OFF-ON
ON-<ON>
<ON>-OFF-<ON>
ON-OFF-<ON>
ON-OFF
ON-ON
ON-OFF-ON
ON-<ON>
2-pole
<ON>-OFF-<ON>
ON-OFF-<ON>
Remarks: 1. Standard installation accessories are included with the product.
2. 600 V vinyl wire (VSF, thick: 2 mm2, length: 200 mm) is used. Please inquire about type and different length of lead wire.
5. Accessories
1) Installation accessories (Repair parts)
Optional installation
accessories
Standard installation accessories
Product name
Front hex nut
Back hex nut
Keying washer
Front Knurl nut
(Nickel plated)
Lock washer
(Nickel plated)
(Uni-chrome plated)
1
18.2 dia.
M12 x 1
M12 x 1
12.3 dia.
M12 x 1
Dimensions
(16.17)
(16.17)
(mm)
0.5
9.7
12.3 dia.
2.3
14
2.3
14
1
2.4
15.6 dia.
15 dia.
2.8
2.4
Part No.
AJ3081
AJ3082
AJ3083
AJ3084
AJ3080
Remark: A selling unit of each accessory is 10 pieces.
• Using the different rubber caps
We recommend silicon rubber and EP rubber caps for the following applications.
1) Silicon rubber caps
2) EP rubber type
• When it is necessary to differentiate by color.
• When using in applications that require resistance to heat and
cold. Ambient temperature: –25°C to +85°C (EP rubber type is
0°C to +40°C.)
When cost is the primary consideration.
• When compactness is required.
Panasonic Corporation Automation Controls Buisiness Division
industrial.panasonic.com/ac/e/
© Panasonic Corporation 2013
AECTB5E 201309-T1
–4–
T15
2) Accessories (Option)
Product name
Indication plate (aluminum)*3
ON-OFF ON-ON
Rubber cap*1, 2, 4
EP rubber type
Silicone rubber type
12.3 dia.
12.3 dia.
8 dia.
10 dia.
1.3
1.3
24.5
Dimensions
(mm)
24.5
8.6
M12
30
30
1.5
1.5
7
0.8
0.8
M12
16
17
16
17
18 dia.
21 dia.
0.8
0.8
Part No.
WD1901
WD1902
WD1911
WD1811∗
Remarks: 1. The asterisk in the part number WD1811∗ for the silicon rubber type rubber cap is where the letter representing the color should be inserted.
(B: black; R: red; Z: grey;Y: yellow; G: green.)
2. EP rubber cap is available in black only.
3. Letters on the display panel are aluminum colored and the area surrounding the letters is black.
4. Indication plate and rubber cap are compatible with the T-15 series switch, T-10 series switch, and T-03/T-06 series switches
(when plate thickness is 2.7 mm or less).
ROCKER PRODUCT TYPES
1. Standard type
1) Solder terminal, without indication on actuator
Solder terminal
Product No.
TR115A-∗F
TR115D-∗F
TR115E-∗F
TR115F-∗F
TR115G-∗F
TR115H-∗F
TR215K-∗F
TR215N-∗F
TR215P-∗F
TR215R-∗F
TR215S-∗F
TR215T-∗F
Kind of operation
< >: Momentary position
Number of poles
1-pole
ON-OFF
ON-ON
ON-OFF-ON
ON-<ON>
<ON>-OFF-<ON>
ON-OFF-<ON>
ON-OFF
ON-ON
ON-OFF-ON
ON-<ON>
2-pole
<ON>-OFF-<ON>
ON-OFF-<ON>
2) Screw terminal, without indication on actuator
Screw terminal
Product No.
Kind of operation
Number of poles
< >: Momentary position
ON-OFF
ON-ON
TR115A-S∗F
TR115D-S∗F
TR115E-S∗F
TR115F-S∗F
TR115G-S∗F
TR115H-S∗F
TR215K-S∗F
TR215N-S∗F
TR215P-S∗F
TR215R-S∗F
TR215S-S∗F
TR215T-S∗F
ON-OFF-ON
1-pole
ON-<ON>
<ON>-OFF-<ON>
ON-OFF-<ON>
ON-OFF
ON-ON
ON-OFF-ON
2-pole
ON-<ON>
<ON>-OFF-<ON>
ON-OFF-<ON>
3) Solder terminal, with ON-OFF indication on actuator
Solder terminal
Product No.
TR115A-∗F
TR215K-∗F
Kind of operation
Number of poles
< >: Momentary position
1-pole
2-pole
ON-OFF
ON-OFF
Remark: Please specify the actuator color by replacing the asterisk in the product number with appropriate letter. (B: black; W: white; R: red; Z: dark grey)
Panasonic Corporation Automation Controls Buisiness Division
industrial.panasonic.com/ac/e/
© Panasonic Corporation 2013
AECTB5E 201309-T1
–5–
T15
4) Screw terminal, with ON-OFF indication on actuator
Screw terminal
Product No.
Kind of operation
Number of poles
< >: Momentary position
1-pole
2-pole
ON-OFF
ON-OFF
TR115A-S∗F
TR215K-S∗F
Remark: Please specify the actuator color by replacing the asterisk in the product number with appropriate letter. (B: black; W: white; R: red; Z: dark grey)
2. Panel-sealed type
1) Solder terminal, without indication on actuator
Solder terminal
Product No.
Kind of operation
< >: Momentary position
Number of poles
ON-OFF
ON-ON
TRP115A-∗F
TRP115D-∗F
TRP115E-∗F
TRP115F-∗F
TRP115G-∗F
TRP115H-∗F
TRP215K-∗F
TRP215N-∗F
TRP215P-∗F
TRP215R-∗F
TRP215S-∗F
TRP215T-∗F
ON-OFF-ON
ON-<ON>
1-pole
<ON>-OFF-<ON>
ON-OFF-<ON>
ON-OFF
ON-ON
ON-OFF-ON
ON-<ON>
2-pole
<ON>-OFF-<ON>
ON-OFF-<ON>
2) Screw terminal, without indication on actuator
Screw terminal
Product No.
Kind of operation
Number of poles
< >: Momentary position
ON-OFF
ON-ON
TRP115A-S∗F
TRP115D-S∗F
TRP115E-S∗F
TRP115F-S∗F
TRP115G-S∗F
TRP115H-S∗F
TRP215K-S∗F
TRP215N-S∗F
TRP215P-S∗F
TRP215R-S∗F
TRP215S-S∗F
TRP215T-S∗F
ON-OFF-ON
1-pole
ON-<ON>
<ON>-OFF-<ON>
ON-OFF-<ON>
ON-OFF
ON-ON
ON-OFF-ON
2-pole
ON-<ON>
<ON>-OFF-<ON>
ON-OFF-<ON>
3) Solder terminal, with ON-OFF indication on actuator
Solder terminal
Product No.
Kind of operation
Number of poles
< >: Momentary position
1-pole
2-pole
ON-OFF
ON-OFF
TRP115A-∗1F
TRP215K-∗1F
4) Screw terminal, with ON-OFF indication on actuator
Screw terminal
Product No.
Kind of operation
Number of poles
< >: Momentary position
1-pole
2-pole
ON-OFF
ON-OFF
TRP115A-S∗1F
TRP215K-S∗1F
Remark: Please specify the actuator color by replacing the asterisk in the product number with appropriate letter. (B: black; W: white; R: red; Z: dark grey)
Panasonic Corporation Automation Controls Buisiness Division
industrial.panasonic.com/ac/e/
© Panasonic Corporation 2013
AECTB5E 201309-T1
–6–
T15
3.Terminal-sealed type
1) Solder terminal, without indication on actuator
Solder terminal
Product No.
Kind of operation
Number of poles
< >: Momentary position
ON-OFF
ON-ON
TRD115A-∗F
TRD115D-∗F
TRD115E-∗F
TRD115F-∗F
TRD115G-∗F
TRD115H-∗F
TRD215K-∗F
TRD215N-∗F
TRD215P-∗F
TRD215R-∗F
TRD215S-∗F
TRD215T-∗F
ON-OFF-ON
1-pole
ON-<ON>
<ON>-OFF-<ON>
ON-OFF-<ON>
ON-OFF
ON-ON
ON-OFF-ON
2-pole
ON-<ON>
<ON>-OFF-<ON>
ON-OFF-<ON>
2) Screw terminal, without indication on actuator
Screw terminal
Product No.
Kind of operation
Number of poles
< >: Momentary position
ON-OFF
ON-ON
TRD115A-S∗F
TRD115D-S∗F
TRD115E-S∗F
TRD115F-S∗F
TRD115G-S∗F
TRD115H-S∗F
TRD215K-S∗F
TRD215N-S∗F
TRD215P-S∗F
TRD215R-S∗F
TRD215S-S∗F
TRD215T-S∗F
ON-OFF-ON
1-pole
ON-<ON>
<ON>-OFF-<ON>
ON-OFF-<ON>
ON-OFF
ON-ON
ON-OFF-ON
2-pole
ON-<ON>
<ON>-OFF-<ON>
ON-OFF-<ON>
3) Solder terminal, with ON-OFF indication on actuator
Solder terminal
Product No.
Kind of operation
Number of poles
< >: Momentary position
1-pole
2-pole
ON-OFF
ON-OFF
TRD115A-∗1F
TRD215K-∗1F
4) Screw terminal, with ON-OFF indication on actuator
Screw terminal
Product No.
Kind of operation
Number of poles
< >: Momentary position
1-pole
2-pole
ON-OFF
ON-OFF
TRD115A-S∗1F
TRD215K-S∗1F
Remark: Please specify the actuator color by replacing the asterisk in the product number with appropriate letter. (B: black; W: white; R: red; Z: dark grey)
Panasonic Corporation Automation Controls Buisiness Division
industrial.panasonic.com/ac/e/
© Panasonic Corporation 2013
AECTB5E 201309-T1
–7–
T15
4. Wire lead type
1) Without indication on actuator
Wire lead type
Product No.
Kind of operation
< >: Momentary position
Number of poles
ON-OFF
ON-ON
TRC115A-∗F
TRC115D-∗F
TRC115E-∗F
TRC115F-∗F
TRC115G-∗F
TRC115H-∗F
TRC215K-∗F
TRC215N-∗F
TRC215P-∗F
TRC215R-∗F
TRC215S-∗F
TRC215T-∗F
ON-OFF-ON
ON-<ON>
1-pole
<ON>-OFF-<ON>
ON-OFF-<ON>
ON-OFF
ON-ON
ON-OFF-ON
ON-<ON>
2-pole
<ON>-OFF-<ON>
ON-OFF-<ON>
2) With ON-OFF indication on actuator
Wire lead type
Product No.
Kind of operation
< >: Momentary position
Number of poles
1-pole
2-pole
ON-OFF
ON-OFF
TRC115A-∗1F
TRC215K-∗1F
Remarks: 1. Please specify the actuator color by replacing the asterisk in the product number with appropriate letter. (B: black; W: white; R: red; Z: dark grey)
2. 600 V vinyl wire (VSF, thick: 2 mm2, length: 200 mm) is used. Please inquire about type and different length of lead wire.
PUSH-BUTTON PRODUCT TYPES
1. Standard type
1) Solder terminal
Solder terminal
Number of poles
1-pole
Kind of operation
Product No.
TB110F-F
TB115D-F
TB210R-F
TB215N-F
Momentary
Alternate
Momentary
Alternate
2-pole
2) Screw terminal
Number of poles
Screw terminal
Product No.
TB110F-SF
TB115D-SF
TB210R-SF
TB215N-SF
Kind of operation
Momentary
Alternate
1-pole
2-pole
Momentary
Alternate
Remarks: 1. Please use switch body with a color cap (sold separately).
2. Standard installation accessories are included with the product.
Color cap
(sold separately)
With color
cap installed
Switch body
Panasonic Corporation Automation Controls Buisiness Division
industrial.panasonic.com/ac/e/
© Panasonic Corporation 2013
AECTB5E 201309-T1
–8–
T15
2. Panel-sealed type
1) Solder terminal
Solder terminal
Product No.
TBP110F-F
TBP115D-F
TBP210R-F
TBP215N-F
Number of poles
1-pole
Kind of operation
Momentary
Alternate
Momentary
Alternate
2-pole
2) Screw terminal
Number of poles
Screw terminal
Product No.
Kind of operation
Momentary
Alternate
TBP110F-SF
TBP115D-SF
TBP210R-SF
TBP215N-SF
1-pole
2-pole
Momentary
Alternate
Remarks: 1. Please use switch body with a color cap (sold separately).
2. Standard installation accessories are included with the product.
Color cap
(sold separately)
With color
cap installed
Switch body
3. Color cap for push-button (Option)
Color cap
(sold separately)
Product name
13.2 dia.
Dimensions
(mm)
11.2
Remark: Please specify the color cap color by replacing the asterisk in the part number
with appropriate letter
Part No.
WDB1821∗
(B: black; W: white; R: red; Z: dark grey; H: light grey;Y: yellow; G: green; L: blue).
4. Installation accessories (Repair parts)
Optional installation
accessories
Standard installation accessories
Product name
Front hex nut
Back hex nut
Keying washer
Front Knurl nut
(Nickel plated)
Lock washer
(Nickel plated)
(Uni-chrome plated)
1
18.2 dia.
M12 x 1
M12 x 1
12.3 dia.
M12 x 1
Dimensions
(16.17)
(16.17)
(mm)
0.5
9.7
12.3 dia.
2.3
14
2.3
14
1
2.4
15.6 dia.
15 dia.
2.8
2.4
Part No.
AJ3081
AJ3082
AJ3083
AJ3084
AJ3080
Remark: A selling unit of each accessory is 10 pieces.
Panasonic Corporation Automation Controls Buisiness Division
industrial.panasonic.com/ac/e/
© Panasonic Corporation 2013
AECTB5E 201309-T1
–9–
T15
SPECIFICATIONS
1. Contact rating
1) Toggle type and Rocker type
Kind of load
AC
DC
Resistive load
15A 250V
0.5A 250V, 0.9A 125V, 15A 30V
0.3A 250V (Time constant: 8 ms),
0.5A 125V (Time constant: 8 ms)
15A 30V (Time constant: 8 ms)
Inductive load
Lamp load
15A 250V (Power factor: 0.6)
400W 100V, 800W 200V, Inrush current: Max. 40 A
7A 30V
—
(incandescent)
400 W 125 V (single phase), 550 W 250 V (single phase),
750 W 250 V (three-phase)
Motor load
2) Push-button type (momentary)
Kind of load
AC
DC
Resistive load
10A 250V
0.4A 250V, 0.8A 125V, 8A 30V
3) Push-button type (alternate)
Kind of load
AC
DC
Resistive load
15A 250V
0.5A 250V, 0.9A 125V, 15A 30V
2. Characteristics
Shape of actuator
Toggle type
Rocker type
Push-button type
Protection grade
*1: IP40
*2: IP64
*3: IP67
Standard type (*1)
Panel-sealed type (*2)
Terminal-sealed type (*2)
Wire leads type (*2)
Panel-sealed type (*3)
Terminal-sealed type (*3)
Wire leads type (*3)
Standard type (*1)
Panel-sealed type (*3)
Standard type (*1)
Min. 5×104 (20 cpm)
ON-OFF, ON-ON,
ON-OFF-ON,
1-pole and 2-pole:
Min. 105
Mechanical
expected life
Min. 3×104 (20 cpm)
3-pole and 4-pole:
Min. 3×104 (20 cpm)
ON-(ON), (ON)-OFF-(ON),
ON-OFF-(ON)
Min. 8.5×104
Standard type: Min. 3×104
Panel-sealed, terminal-
sealed and wire leads types:
Min. 104
Electrical expected life
(10 cpm)
Standard and panel-sealed types: Min. 3×104
Min. 104
Terminal-sealed and wire leads types: Min. 1.5×104
Dielectric strength
1500 Vrms (at detection current: 10mA)
Insulation resistance
Min. 100 MΩ (at 500 V DC measured by insulation resistive meter)
Initial, Max. 10 mΩ (By voltage drop at 1 A, 2 to 4 V DC)
Wire leads type only: Initial, Max. 30 mΩ (By voltage drop at 1 A, 2 to 4 V DC)
112.7N for 1 min. (For operating direction)
Contact resistance
Actuator strength
Vibration resistance
10 to 55 Hz at double amplitude of 1.5 mm (contact opening: Max. 10 ms)
Terminal strength
(static load)
24.5N for 1 min.
Ambient temperature
Contact material
–25°C to +70°C (Not freezing below 0°C)
AgZnO alloy
DATA (Electrical life, For toggle standard type)
Tested condition: 250 V AC, Power factor: 0.6 and 10 cpm
10
9
4-pole and 3-pole types
8
2-pole and 1pole types
7
6
5
4
3
2
1
0
2
6
10 14 18 22 26 30
Current (A)
Panasonic Corporation Automation Controls Buisiness Division
industrial.panasonic.com/ac/e/
© Panasonic Corporation 2013
AECTB5E 201309-T1
–10–
T15
The CAD data of the products with a CAD Data mark can be downloaded from: http://industrial.panasonic.com/ac/e/
TOGGLE TYPE DIMENSIONS
1. Standard type
mm General tolerance: 0.5
1) Solder terminal
1-pole
30°
2-pole
30°
3-pole
30°
4-pole
30°
4°
8°
4°
4°
CAD Data
0.4
0.4
0.4
17.5
12
0.4
17.5
12
17.5
12
Keyway
17.5
12
Keyway
Keyway
Keyway
M12×1
M12×1
M12×1
M12×1
0.4
0.4
0.4
0.4
23.7
27
27
27
6
6
6
6
29
Hole for wire
leads: 2 dia.
Length: 4
Hole for wire
leads: 2 dia.
Length: 4
Hole for wire
leads: 2 dia.
Length: 4
Hole for wire
leads: 2 dia.
Length: 4
33
33
33
19.5
28
15.8
36.5
Remark: ON-OFF type does not have terminal No. 2, 5, 8 and 11.
2) Screw terminal (M3.5)
1-pole
30°
2-pole
30°
3-pole
30°
4-pole
30°
CAD Data
4°
8°
4°
4°
0.4
0.4
0.4
0.4
17.5
12
17.5
17.5
12
17.5
12
Keyway
Keyway
M12×1
Keyway
Keyway
M12×1
M12×1
M12×1
0.4
0.4
0.4
0.4
12
23.7
30.3
30.3
30.3
6
9.3
9.3
9.3
29
0.4
0.4
0.4
33
33
33
19.5
36.5
28
15.8
Remark: ON-OFF type does not have terminal No. 2, 5, 8 and 11.
3) .250 Quick-connect terminal
1-pole
2-pole
3-pole
30°
4-pole
30°
CAD Data
4°
8°
8°
8°
30°
30°
0.4
0.4
0.4
0.4
17.5
17.5
17.5
12
17.5
Keyway
Keyway
M12×1
Keyway
M12×1
Keyway
M12×1
M12×1
0.4
0.4
0.4
0.4
12
12
12
27
30.3
30.3
30.3
9.3
9.3
9.3
9.3
29
33
3-.250 Quick-
connect terminal
33
33
6-.250 Quick-
connect terminal
9-.250 Quick-
connect terminal
12-.250 Quick-
connect terminal
19.5
15.8
36.5
28
Remark: 1. ON-OFF type does not have terminal No. 2, 5, 8 and 11.
2. There is no through-hole on .250 Quick-connect terminals.
Panasonic Corporation Automation Controls Buisiness Division
industrial.panasonic.com/ac/e/
© Panasonic Corporation 2013
AECTB5E 201309-T1
–11–
T15
2. Panel-sealed type
1) Solder terminal
2) Screw terminal (M3.5)
1-pole
30°
2-pole
1-pole
30°
2-pole
CAD Data
8°
4°
4°
30°
8°
30°
17.5
17.5
10
17.5
10
17.5
10
M12×1
M12×1
M12×1
M12×1
18 dia.
D cut
18 dia.
D cut
18 dia.
18 dia.
D cut
D cut
7.5
7.5
7.5
7.5
10
23.7
26.9
27
30.2
6
9
9.3
19.5
19.5
15.8
15.8
29
29
33
33
Remark: ON-OFF type does not have terminal No. 2 and 5.
3.Terminal-sealed type
1) Solder terminal
2) Screw terminal (M3.5)
1-pole
30°
2-pole
30°
1-pole
30°
2-pole
30°
CAD Data
8°
4°
8°
4°
17.5
17.5
10.3
17.5
10.3
17.5
10.3
M12×1
M12×1
M12×1
M12×1
18 dia.
D cut
18 dia.
D cut
18 dia.
D cut
18 dia.
D cut
7.5
7.5
7.5
7.5
10.3
23.7
26.9
29
32.2
5
10.3
5
10.3
15.8
19.5
15.8
19.5
29
29
33
33
Remark: ON-OFF type does not have terminal No. 2 and 5.
4. Wire leads type
1-pole
2-pole
4°
8°
30°
30°
CAD Data
18 dia.
M12×1
18 dia.
17.5
17.5
M12×1
D cut
D cut
7.5
7.5
10.3
10.3
33.2
200
36.4
Color of wire leads
20
20
No.
1
2
3
4
5
6
Color
200
4
10
Brown
Red
4
10
Orange
Yellow
Green
Blue
Remarks: 1. ON-OFF type does not have wire lead
No. 2 and 5.
3
2
5
1
15.8
3
2
1
21.1
2. 600 V vinyl wire (VSF, thick: 2 mm2,
length: 200 mm) is used. Please inquire
about type and different length of lead
wire.
6
4
30.6
33
Panasonic Corporation Automation Controls Buisiness Division
industrial.panasonic.com/ac/e/
© Panasonic Corporation 2013
AECTB5E 201309-T1
–12–
T15
ROCKER TYPE DIMENSIONS (mm) (General tolerance: 0.5)
1. Standard type
1) Solder terminal
2) Screw terminal (M3.5)
1-pole
2-pole
1-pole
2-pole
CAD Data
2-M3×0.5
2-M3×0.5
2-M3×0.5
2-M3×0.5
45
38
27
45
38
27
45
38
27
45
38
27
10.2
5.7
10.2
5.7
10.2
5.7
10.2
5.7
33.8
37
37.1
40.3
9.3
6
9.3
6
15.8
15.8
19.5
19.5
29
29
33
33
Remarks: 1. ON-OFF type does not have terminal No. 2 and 5.
2. Dimensions of actuator: 13.4 × 27
2. Panel-sealed type
1) Solder terminal
2) Screw terminal (M3.5)
1-pole
41
2-pole
41
1-pole
41
2-pole
41
CAD Data
7.8
7.8
7.8
7.8
2.5
2.5
2.5
2.5
27.7
27.7
10.3
30.9
30.9
10.3
5
5
34
34
34
34
17 24
22 29
17 24
22 29
Remarks: 1. ON-OFF type does not have terminal No. 2 and 5.
2. Dimensions of actuator: 1-pole: 12.6 × 29, 2-pole: 17.4 × 29
3.Terminal-sealed type
1) Solder terminal
2) Screw terminal (M3.5)
1-pole
41
2-pole
41
1-pole
41
2-pole
41
CAD Data
7.8
7.8
7.8
7.8
2.5
2.5
2.5
2.5
27.7
27.7
30.9
5
30.9
5
10.3
10.3
34
34
34
34
24
2229
17 24
22 29
17
Remarks: 1. ON-OFF type does not have terminal No. 2 and 5.
2. Dimensions of actuator: 1-pole: 12.6 × 29, 2-pole: 17.4 × 29
Panasonic Corporation Automation Controls Buisiness Division
industrial.panasonic.com/ac/e/
© Panasonic Corporation 2013
AECTB5E 201309-T1
–13–
T15
4. Wire leads type
1-pole
41
2-pole
41
CAD Data
7.8
7.8
2.5
2.5
42.2
45.4
Color of wire leads
20
200
20
200
4
No.
1
2
3
4
5
6
Color
10
4
10
Brown
Red
34
Remarks: 1. ON-OFF type does not have terminal
No. 2 and 5.
34
2. Dimensions of actuator: 1-pole: 12.6 ×
Orange
Yellow
Green
Blue
29, 2-pole: 17.4 × 29
3. 600 V vinyl wire (VSF, thick: 2 mm2,
length: 200 mm) is used. Please inquire
about type and different length of lead
wire.
3
2
5
1
3
2
1
1724
22
29
6
4
PUSH-BUTTON TYPE DIMENSIONS (mm) (General tolerance: 0.5)
1. Standard type
• Solder terminal, Momentary
• Solder terminal, Alternate
• Screw terminal (M3.5)
Dimensions other than listed below are
same as those of solder terminal type.
1-pole
13.2 dia.
2-pole
1-pole
13.2 dia.
2-pole
13.2 dia.
13.2 dia.
M12×1
M12×1
M12×1
1-pole
2-pole
M12×1
9
9
9
9
17.1
17.1
14
15.9
14
5.9
4.7
Keyway
Keyway
Keyway
Keyway
17.3
23.7
4.7
5.9
14
9.3
9.3
26.9
32.4
32.4
6
15.8
19.5
6
6
6
29
33
15.8
19.5
15.8
19.5
29
29
33
33
2. Panel-sealed type
• Solder terminal, Momentary
• Solder terminal, Alternate
• Screw terminal (M3.5)
Dimensions other than listed below are
same as those of solder terminal type.
1-pole
13.2 dia.
2-pole
13.2 dia.
1-pole
13.2 dia.
2-pole
13.2 dia.
M12×1
15.9
M12×1
M12×1
M12×1
1-pole
2-pole
9
9
9
9
15.9
15.9
15.9
4.3
7.5
4.3
7.5
4.3
7.5
4.3
7.5
D cut
D cut
D cut
D cut
14.4
14.4
14.4
17.7
23.7
9.3
9.3
26.9
32.4
32.4
6
6
15.8
19.5
6
6
29
33
15.8
15.8
19.5
19.5
29
29
33
33
Panasonic Corporation Automation Controls Buisiness Division
industrial.panasonic.com/ac/e/
© Panasonic Corporation 2013
AECTB5E 201309-T1
–14–
T15
MOUNTING DIMENSIONS
1.Toggle type
Type
Standard type
12.3 dia.
Front hex nut
Keying washer
Lock washer
Back hex nut
12.5 dia.
12.5 dia.
Panel cutout
11.5
(mm)
0.1
9.2
1.5
3+00.2 dia.
Max. 5.6 mm
(without keying washer) (without keying washer)
Max. 5.6 mm
Panel thickness
Type
Max. 4.6 mm
Panel-sealed, Terminal-sealed
and Wire leads types
12.5 dia.
12.5 dia.
Panel cutout
(mm)
11.2
Max. 4 mm
(without keying washer)
Panel thickness
Max. 4 mm
Remark: For panel installations of standard type, be use to use the back hex nut.
2. Rocker type
Type
Standard type
Panel-sealed, Terminal-sealed and Wire leads types
14.5+0.3
0
1 pole
2-pole
Panel cutout
(mm)
0.3
38
0.1
0.1
34.2
34.2
28+0.3
0
0.1
0.1
2-3.5 0.1 dia.
17.2
22.2
Panel thickness
Max. 4.5 mm
1.2 to 3.2 mm
3. Push-button type
Type
Standard type
Panel-sealed type
12.5 dia.
12.5 dia.
12.3 dia.
12.5 dia.
12.5 dia.
Panel cutout
(mm)
11.5
11.2
9
1.5
3 dia.
Momentary, 1-pole:
Max. 10 mm
Momentary, 2-pole:
Max. 7.5 mm
Alternate: Max. 7.5 mm Alternate: Max. 7.5 mm
(without keying washer) (without keying washer)
Momentary, 1-pole:
Max. 11 mm
Momentary, 2-pole:
Max. 7.5 mm
Momentary, 1-pole:
Max. 10 mm
Momentary, 2-pole:
Max. 6.5 mm
Max. 4 mm
(without keying washer)
Panel thickness
Max. 4 mm
Alternate: Max. 6.5 mm
Remark: For panel installations of standard type, be use to use the back hex nut.
Panasonic Corporation Automation Controls Buisiness Division
industrial.panasonic.com/ac/e/
© Panasonic Corporation 2013
AECTB5E 201309-T1
–15–
T15
ELECTRICAL CIRCUIT DIAGRAM
1.Toggle type and Rocker type
Number of pole
1-pole
2-pole
3-pole
Available *3
—
4-pole
Available *3
—
Toggle type
Available
Available
Available
Available
Rocker type
Terminal arrangement
(As seen from terminal side)
Keyway
Keyway
Keyway
Keyway
Actuator shape
Toggle type Rocker type
Right
Part No.
1-3
1-3, 4-6
—
1-3, 4-6, 7-9
1-3, 4-6, 7-9, 10-12
Keyway
ON-OFF
—
—
—
—
—
—
—
Left
—
—
Keyway
Keyway
—
Right
Part No.
2-3
—
2-3, 5-6
—
2-3, 5-6, 8-9
—
2-3, 5-6, 8-9, 11-12
ON-ON
ON-<ON>
*1
—
—
Left
1-2
2-3
—
1-2, 4-5
2-3, 5-6
—
1-2, 4-5, 7-8
2-3, 5-6, 8-9
—
1-2, 4-5, 7-8, 10-11
2-3, 5-6, 8-9, 11-12
—
Keyway
Keyway
Keyway
Keyway
*2
Right
Part No.
Center
ON-OFF-ON
<ON>-OFF-<ON>
ON-OFF-<ON>
*1
Left
1-2
1-2, 4-5
1-2, 4-5, 7-8
1-2, 4-5, 7-8, 10-11
*2
ON-OFF type does ON-OFF type does ON-OFF type does ON-OFF type does
Remarks
not have a terminal
No. 2.
not have terminal
No. 2 and 5.
not have terminal
No. 2, 5 and 8.
not have terminal
No. 2, 5, 8 and 11.
Remarks: *1. For ON-<ON>, ON-OFF-<ON> type of toggle, if the lever turns to the keyway side, it takes momentary position.
*2. For the rocker type, if the actuator turns to the left side in view of the side where a part number is marked, it takes momentary position.
*3. Only standard type
2. Push-button type
1-pole
2-pole
Terminal arrangement
(As seen from terminal side)
Keyway
Keyway
2-3
1-2
2-3, 5-6
1-2, 4-5
Push-button position
and contact terminal number
Operated
Panasonic Corporation Automation Controls Buisiness Division
industrial.panasonic.com/ac/e/
© Panasonic Corporation 2013
AECTB5E 201309-T1
–16–
T15
NOTES
1. Dustproof, waterproof,
2. Installation
e. If the rubber cap is installed over the
anticorrosive gas, and oil-proof
designs
1) For the toggle and push-button type
a. When installing the standard type
switch, be sure to use a hex nut.
b. For the panel-sealed, terminal-sealed
and wire lead types, use a lock washer
on the front side of the panel, and an
O-ring on the back side of it.
hex nut, the waterproof performance will
be impaired although the dustproof
performance will not be affected.
The panel-sealed type/terminal-sealed
type/wire lead type switch has a
protection level of IP67 on the outer side
of the mounting panel and a level of IP40,
IP60, or IP67 on the inner side of the
panel.
For actual application, note the following
points:
1) Avoid immersion in water or oil during
installation.
c. Do not install the switch by rotating it.
2) For the rocker type
Hexagonal nut
a. In case the panel-sealed, terminal-
sealed or wire leads types are used in the
condition where the water splash on,
please install the switches tilt more than
25°. (90° recommended)
2) Avoid immersion in water or oil during
operation.
3. Soldering
3) Oils or gases impose varying degrees
of impact on the switch’s sealing
performance depending on type or
quantity.
1) By using 350°C soldering iron,
soldering should be completed within 5
seconds.
2) Exercise care so as not to touch the
switch body with a soldering iron.
4. Load type and ratings
1) When the switch is loaded with a lamp,
motor or capacitive load, a surge current
higher than the stationary current passes
through the switch contacts.
Measure the surge with the actual load
and, if needed, take necessory action so
that the surge will not exceed the switch’s
rated current.
Mounting panel
Min. 25°
4) While the switch has a immersion and
dust-protected design, its sealing
performance or operabillity may be
adversely affected in an environment
where in the switch's movable parts can
be contaminated with dust, oil, or other
foreign objects. For the toggle type, use
of a rubber cap is recommended.
5)The standard toggle switch, when used
with a rubber cap, provides a protection
level of IP54.
b. In case water inside the switch case
may freeze, please install the switch
vertically to avoid the water remain inside
the switch.
2) When the switch is loaded with an
inductive load (relay, solenoid, buzzer,
etc.), a contact failure may result from arc
discharge caused by a
It should be used in an environment
where it will not be subject to frequent
water splashes.
3) Rubber cap installation
6) As the sealing performance of the
rocker type switch is affected by the panel
processing accuracy or mounted panel
thickness, check the switch under actual
loading conditions. (While water or dust
will not enter the switch’s internal
structure, it may enter the panel.)
7) Do not operate the rocker type switch
when water accumulates in the actuator.
a. The washer should be used on the
back side of the panel.
counterelectromotive force. It is advisable
that you use an adequate anti-spark
circuit across the switch contacts.
5. Others
1) Do not apply an excessive static load
exceeding 112.7N {11.5kgf}
perpendicular to the direction of
operation.
2) Operate the switch knob by hand.
3) Take care not to drop the product as it
may impair performance.
3.0 to 3.5 mm
Washer
b. Enough screw pitch should be
obtained being adjusted within 3 to
3.5mm (See figure above.)
c. Install a rubber cap on the switch knob
before securing the switch with the hex
nut.
d. The mounting hole in the panel should
preferably be provided with an anti-
rotation projection.
Mounting hole
Panasonic Corporation Automation Controls Buisiness Division
industrial.panasonic.com/ac/e/
© Panasonic Corporation 2013
AECTB5E 201309-T1
–17–
相关型号：
TRC25-106-K020BW
Tantalum Capacitor, Polarized, Tantalum (wet), 20V, 10% +Tol, 10% -Tol, 10uF, Through Hole Mount, RADIAL LEADED, ROHS COMPLIANT
RCD
TRC25-155-K050AQ
Tantalum Capacitor, Polarized, Tantalum (wet), 50V, 10% +Tol, 10% -Tol, 1.5uF, Through Hole Mount, RADIAL LEADED
RCD
TRC25-155-M050BQ
Tantalum Capacitor, Polarized, Tantalum (wet), 50V, 20% +Tol, 20% -Tol, 1.5uF, Through Hole Mount, RADIAL LEADED
RCD
TRC25-476-M004AQ
Tantalum Capacitor, Polarized, Tantalum (wet), 4V, 20% +Tol, 20% -Tol, 47uF, Through Hole Mount, RADIAL LEADED
RCD
TRC25-685-J025BQ
Tantalum Capacitor, Polarized, Tantalum (wet), 25V, 5% +Tol, 5% -Tol, 6.8uF, Through Hole Mount, RADIAL LEADED
RCD
©2020 ICPDF网 联系我们和版权申明