TX2-H-9V [PANASONIC]
Power/Signal Relay, DPDT, Momentary, 0.016A (Coil), 9VDC (Coil), 140mW (Coil), 2A (Contact), 220VDC (Contact), DC Input, DC Output, Through Hole-Straight Mount, ROHS COMPLIANT;型号: | TX2-H-9V |
厂家: | PANASONIC |
描述: | Power/Signal Relay, DPDT, Momentary, 0.016A (Coil), 9VDC (Coil), 140mW (Coil), 2A (Contact), 220VDC (Contact), DC Input, DC Output, Through Hole-Straight Mount, ROHS COMPLIANT 光电二极管 继电器 |
文件: | 总6页 (文件大小:126K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
TESTING
2 AMP. HIGH CAPACITY
RELAY WITH HIGH
SURGE VOLTAGE & HIGH
BREAKDOWN VOLTAGE
TX-RELAYS
FEATURES
7.4
.291
7.4
.291
15
.591
15
.591
• Breakdown voltage between contacts and coil: 2,000 V
• Surge withstand between contacts and coil: 2,500 V
• High contact capacity: 2 A 30 V DC
8.4
8.2
.323
.331
• Surface-mount type available
mm inch
SPECIFICATIONS
Contact
Characteristics
Arrangement
2 Form C
Initial insulation resistance*1
Between open con-
tacts
Min. 1,000 MΩ (at 500 V DC)
Initial contact resistance, max.
(By voltage drop 6 V DC 1 A)
1,000 Vrms for 1 min.
(Detection current: 10 mA)
100 mΩ
Initial
Contact material
Gold-clad silver alloy
2 A 30 V DC
1,000 Vrms for 1 min.
(Detection current: 10 mA)
breakdown Between contact sets
Nominal switching capacity
(resistive load)
voltage
Between contact and
2,000 Vrms for 1 min.
coil
(Detection current: 10 mA)
Max. switching power
(resistive load)
60 W
Between open
contacts
(10×160 µs)
Rating
1,500 V (FCC Part 68)
Max. switching voltage
Max. switching current
Min. switching capacity ❇1
220 V DC
2 A
Initial surge
voltage
Between contacts
and coil (2×10 µs)
2,500 V (Bellcore)
10 µA 10 mV DC
140 mW (1.5 to 24 V DC)
270 mW (48 V DC)
Temperature rise*2 (at 20°C)
Max. 50°C
Single side stable
Nominal
operating
power
Max. 4 ms (Approx. 2 ms)
[Max. 4 ms (Approx. 2 ms)]
Operate time [Set time]*3 (at 20°C)
1 coil latching
100 mW (1.5 to 24 V DC)
200 mW (1.5 to 24 V DC)
108
2 coil latching
Release time [Reset time]*4 (at
20°C)
Max. 4 ms (Approx. 1 ms)
[Max. 4 ms (Approx. 2 ms)]
Min. 750 m/s2 {75 G}
Min. 1,000 m/s2 {100 G}
196 m/s2 {20 G}, 10 to 55 Hz
at double amplitude of 3.3 mm
294 m/s2 {30G}, 10 to 55 Hz
at double amplitude of 5 mm
Mechanical (at 180 cpm)
2 A 30 V DC
Expected
life (min.
operations)
Functional*5
Destructive*6
105
Shock resistance
resistive
Electrical
(at 20 cpm)
1 A 30 V DC
resistive
5×105
Functional*7
Vibration resistance
Destructive
Notes:
❇1This value can change due to the switching frequency, environmental conditions,
and desired reliability level, therefore it is recommended to check this with the ac-
tual load.
Conditions for oper-
–40°C to +85°C (up to 24 V coil)
❇2The upper limit for the ambient temperature is the maximum temperature that
can satisfy the coil temperature rise. Under the packing condition, allowable tem-
perature range is from –40 to +70°C –40°C to +158°F.
ation, transport and Ambient tem- –40°F to +185°F (up to 24 V coil)
storage*8
perature ❇2
–40°C to +70°C (48 V coil)
–40°F to +158°F (48 V coil)
(Not freezing and
condensing at low
temperature)
Remarks
Humidity
5 to 85% R.H.
* Specifications will vary with foreign standards certification ratings.
*1 Measurement at same location as "Initial breakdown voltage" section.
*2 By resistive method, nominal voltage applied to the coil; contact carrying current:
2 A.
Unit weight
Approx. 2 g .071 oz
*3 Nominal voltage applied to the coil, excluding contact bounce time.
*4 Nominal voltage applied to the coil, excluding contact bounce time without diode.
*5 Half-wave pulse of sine wave: 6 ms; detection time: 10 µs.
*6 Half-wave pulse of sine wave: 6 ms.
*7 Detection time: 10 µs.
*8 Refer to 4. Conditions for operation, transport and storage mentioned in Cautions
for use (Page 178).
ORDERING INFORMATION
Ex. TX
2
SA
L
H
3V
Z
–
–
–
–
Contact arrangement Surface-mount availability
Operating function Terminal shape Coil voltage (DC)
Packing style
2: 2 Form C
Nil: Standard PC board terminal type or
Nil: self-clinching terminal type
Nil: Single side
Nil: stable
L: 1 coil latching
L2: 2 coil latching
Nil: Standard PC 1.5, 3, 4.5, 5, 6, Nil: Tube packing
board terminal or
surface-mount
terminal
9, 12, 24, 48* V Z: Tape and reel
packing(picked
SA: Standard surface-mount terminal type
SL: High connection reliability surface-mount
SL: terminal type
from the 8/9/10/12
-pin side
H: Self-clinching
terminal
SS: Space saving surface-mount terminal type
Notes: 1. Tape and reel (picked from 1/3/4/5-pin side) is also available by request. Part number suffix “-X” is
*48 V coil type: Single side stable only
needed when ordering.
(ex.) TX2SA-3 V-X
2. Tape and reel packing symbol “-Z” or “-X” are not marked on the relay.
154
TX
Surface-mount terminal variation
Usable conditions based on terminal connection solder reliability
Variation
Terminal style
Normal environments (indoor)
Drastic temperature fluctuations (outdoor)
0.25
.010
8.4
.331
SA type
Recommended
—
5.08
.200
(Standard surface-mount terminal type)
9.4±0.5
.370±.020
0.25
.010
Max.
10.0
.394
SL type
(Highly connection reliability surface-
mount terminal type)
Recommended
Recommended
Recommended
Recommended
5.08
.200
9.4±0.5
.370±.020
0.25
.010
Max.
10.0
.394
SS type
(Space saving surface-mount terminal
type)
5.08
.200
7.4±0.5
.291±.020
TYPES AND COIL DATA (at 20°C 68°F)
1) Standard PC board terminal type and self-clinching terminal type
1. Single side stable
Part No.
Nominal
operating
current,
Nominal
operating
power,
mW
Max.
allowable
voltage,
V DC
Nominal
voltage,
V DC
Pick-up
voltage,
V DC (max.)
Drop-out
voltage,
V DC (min.)
Coil
resistance,
Ω (±10%)
Standard PC
Self-clinching
terminal
board terminal
mA (±10%)
TX2-1.5 V
TX2-3 V
TX2-H-1.5 V
TX2-H-3 V
TX2-H-4.5 V
TX2-H-5 V
TX2-H-6 V
TX2-H-9 V
TX2-H-12 V
TX2-H-24 V
TX2-H-48 V
1.5
3
1.13
2.25
3.38
3.75
4.5
0.15
0.3
0.45
0.5
0.6
0.9
1.2
2.4
4.8
93.8
46.7
31
16
140
140
140
140
140
140
140
140
270
2.2
4.5
6.7
7.5
9
64.3
145
TX2-4.5 V
TX2-5 V
4.5
5
28.1
23.3
15.5
11.7
5.8
178
TX2-6 V
6
257
TX2-9 V
9
6.75
9
579
13.5
18
TX2-12 V
TX2-24 V
TX2-48 V
12
24
48
1,028
4,114
8,533
18
36
36
5.6
57.6
2. 1 Coil latching
Part No.
Nominal
operating
current,
Nominal
operating
power,
mW
Max.
allowable
voltage,
V DC
Nominal
voltage,
V DC
Coil
resistance,
Ω (±10%)
Set voltage, Resetvoltage,
Standard PC
Self-clinching
terminal
V DC (max.)
V DC (max.)
board terminal
mA (±10%)
TX2-L-1.5 V
TX2-L-3 V
TX2-L-4.5 V
TX2-L-5 V
TX2-L-6 V
TX2-L-9 V
TX2-L-12 V
TX2-L-24 V
TX2-L-H-1.5 V
TX2-L-H-3 V
TX2-L-H-4.5 V
TX2-L-H-5 V
TX2-L-H-6 V
TX2-L-H-9 V
TX2-L-H-12 V
TX2-L-H-24 V
1.5
3
1.13
2.25
3.38
3.75
4.5
1.13
2.25
3.38
3.75
4.5
66.7
33.3
22.2
20
22.5
90
100
100
100
100
100
100
100
100
2.2
4.5
6.7
7.5
9
4.5
5
202.5
250
6
16.7
11.1
8.3
360
9
6.75
9
6.75
9
810
13.5
18
12
24
1,440
5,760
18
18
4.2
36
3. 2 Coil latching
Part No.
Nominal
operating
current,
Nominal
operating
power,
mW
Max.
allowable
voltage,
V DC
Nominal
voltage,
V DC
Coil
resistance,
Ω (±10%)
Set voltage, Resetvoltage,
Standard PC
Self-clinching
terminal
V DC (max.)
V DC (max.)
board terminal
mA (±10%)
TX2-L2-1.5 V
TX2-L2-3 V
TX2-L2-4.5 V
TX2-L2-5 V
TX2-L2-6 V
TX2-L2-9 V
TX2-L2-12 V
TX2-L2-24 V
Notes:
TX2-L2-H-1.5 V
TX2-L2-H-3 V
TX2-L2-H-4.5 V
TX2-L2-H-5 V
TX2-L2-H-6 V
TX2-L2-H-9 V
TX2-L2-H-12 V
TX2-L2-H-24 V
1.5
3
1.13
2.25
3.38
3.75
4.5
1.13
2.25
3.38
3.75
4.5
133.9
66.7
44.5
40
11.2
45
200
200
200
200
200
200
200
200
2.2
4.5
6.7
7.5
9
4.5
5
101.2
125
6
33.3
22.2
16.7
8.3
180
9
6.75
9
6.75
9
405
13.5
18
12
24
720
18
18
2,880
36
1. Specified value of pick-up, drop-out, set and reset voltage is with the condition of
square wave coil pulse.
2. Standard packing: Tube: 40 pcs.; Case: 1,000 pcs.
3. In case of 5 V transistor drive circuit, it is recommended to use 4.5 V type relay.
155
TX
2) Surface-mount terminal type
1. Single side stable
Nominal
operating
current,
Nominal
voltage,
V DC
Drop-out
voltage,
V DC (min.)
Nominal
operatingpower,
mW
Max. allowable
voltage,
Pick-up voltage,
V DC (max.)
Coil resistance,
Part No.
Ω (±10%)
V DC
mA (±10%)
TX2S❍-1.5 V
TX2S❍-3 V
TX2S❍-4.5 V
TX2S❍-5 V
TX2S❍-6 V
TX2S❍-9 V
TX2S❍-12 V
TX2S❍-24 V
TX2S❍-48 V
1.5
3
1.13
2.25
3.38
3.75
4.5
0.15
0.3
0.45
0.5
0.6
0.9
1.2
2.4
4.8
93.8
46.7
31
16
140
140
140
140
140
140
140
140
270
2.2
4.5
6.7
7.5
9
64.3
145
4.5
5
28.1
23.3
15.5
11.7
5.8
178
6
257
9
6.75
9
579
13.5
18
12
24
48
1,028
4,114
8,533
18
36
36
5.6
57.6
2. 1 coil latching
Nominal
operating
current,
Nominal
voltage,
V DC
Nominal
operatingpower,
mW
Max. allowable
voltage,
Set voltage,
V DC (max.)
Reset voltage,
V DC (max.)
Coil resistance,
Part No.
Ω (±10%)
V DC
mA (±10%)
TX2S❍-L-1.5 V
TX2S❍-L-3 V
TX2S❍-L-4.5 V
TX2S❍-L-5 V
TX2S❍-L-6 V
TX2S❍-L-9 V
TX2S❍-L-12 V
TX2S❍-L-24 V
1.5
3
1.13
2.25
3.38
3.75
4.5
1.13
2.25
3.38
3.75
4.5
66.7
33.3
22.2
20
22.5
90
100
100
100
100
100
100
100
100
2.2
4.5
6.7
7.5
9
4.5
5
202.5
250
6
16.7
11.1
8.3
360
9
6.75
9
6.75
9
810
13.5
18
12
24
1,440
5,760
18
18
4.2
36
3. 2 coil latching
Nominal
operating
current,
Nominal
voltage,
V DC
Nominal
operatingpower,
mW
Max. allowable
voltage,
Set voltage,
V DC (max.)
Reset voltage,
V DC (max.)
Coil resistance,
Part No.
Ω (±10%)
V DC
mA (±10%)
TX2S❍-L2-1.5 V
TX2S❍-L2-3 V
TX2S❍-L2-4.5 V
TX2S❍-L2-5 V
TX2S❍-L2-6 V
TX2S❍-L2-9 V
TX2S❍-L2-12 V
TX2S❍-L2-24 V
1.5
3
1.13
2.25
3.38
3.75
4.5
1.13
2.25
3.38
3.75
4.5
133.9
66.7
44.5
40
11.2
45
200
200
200
200
200
200
200
200
2.2
4.5
6.7
7.5
9
4.5
5
101.2
125
6
33.3
22.2
16.7
8.3
180
9
6.75
9
6.75
9
405
13.5
18
12
24
720
18
18
2,880
36
❍: For each surface-mounted terminal variation, input the following letter.
SA type: A , SL type: L , SS type: S
Notes:
1. Specified value of pick-up, drop-out, set and reset voltage is with the condition of square wave coil pulse.
2. Standard packing: Tube: 40 pcs.; Case: 1,000 pcs.
3. Tape and reel packing is also available for surface-mount type by request. Part number suffix "-X" or "-Z" is needed when ordering.
In this case, "X" or "Z" are not marked on the relay.
Quantity in tape and reel: 500 pcs.
(ex.) • TX2SA-3V-X
• TX2SA-L-3V-Z
Picked from the 1/3/4/5-pin side
Picked from the 8/9/10/12-pin side
4. In case of 5 V transistor drive circuit, it is recommended to use 4.5 V type relay.
156
TX
mm inch
DIMENSIONS
PC board pattern
(Copper-side view)
Schematic (Bottom view)
1. Single side stable and 1 coil latching type
15
Single side stable
(Deenergized condition)
1 coil latching
(Reset condition)
Standard PC board terminal
7.4
.591
.291
0.65
8.2
10.16
.026
.323
1
3
4
5
1
3
4 5
.400
2.54
+
–
–
+
3.5
.100
.138
0.5
0.25
.010
5.08
.200
.020
5.08
.200
1.15
5.08
.200
2.54
.100
.045
12
10
9
8
12
10 9 8
8-1.0 dia
Direction indication*
Direction indication*
8-.039 dia
15
.591
7.4
Self clinching terminal
.291
Tolerance: ±0.1 ±.004
*Orientation stripe located on top of relay.
0.65
8.2
.026
.323
3.5
.138
0.5
0.25
.010
.020
5.08
.200
1.15
5.08
.200
2.54
.100
.045
General tolerance: ±0.3 ±.012
Suggested mounting pad
Schematic (Top view)
Surface-mount terminal
SA type
(Top view)
Single side stable
(Deenergized condition)
1 coil latching
(Reset condition)
5.08
.200
2.54
1
.100
.039
15
7.4
12 10
9
8
12
10
9
8
.591
1.6
.0.63
.291
–
+
+
–
3.16
.124
7.24
8.2
8.4
.285
.323
.331
1
3
4
5
1
3
4
5
5.08
.200
9.4±0.5
.370±.020
0.5
0.3
0.65
.026
.020
Direction indication
Direction indication
.012
0.25
.010
For glue-pad
2.54
.100
15
.591
5.08
.200
15
.591
7.4
5.08
.200
SL type
SS type
2.54
1
.291
.100
.039
8.2
Max.
10.0
.390
3.16
.124
.323
7.24
.285
0.5
5.08
.200
9.4±0.5
.370±.020
0.65
.026
.020
0.25
.010
2.54
.100
5.08
.200
15
.591
5.08
.200
7.4
2.54
.100
1
.291
.039
8.2
Max.
10.0
.390
2.16
.085
.323
6.24
.246
0.5
5.08
.200
0.65
.026
.020
0.25
.010
2.54
.100
5.08
.200
7.4±0.5
.291±.020
Tolerance: ±0.1 ±.004
General tolerance: ±0.3 ±.012
PC board pattern
(Copper side view)
Schematic (Bottom view)
2 coil latching (Reset condition)
2. Coil latching type
Standard PC board terminal
15
7.4
.591
.291
12.7
1
3
4
5
6
0.65
.500
2.54
8.2
.026
.323
.100
+
–
3.5
.138
5.08
.200
+
12
–
7
0.5
0.25
.010
.020
10
9
8
5.08
.200
1.15
5.08
.200
2.54
.100
.045
10-1.0 dia
Direction indication*
10-.039 dia
15
.591
7.4
Self clinching terminal
.291
Tolerance: ±0.1 ±.004
0.65
8.2
.026
.323
3.5
.138
0.5
0.25
.010
.020
5.08
.200
1.15
5.08
.200
2.54
.100
.045
General tolerance: ±0.3 ±.012
Suggested mounting pad (Top view)
Schematic (Top view)
1 coil latching (Reset condition)
Surface-mount terminal
SA type
5.08
15
2.54
.100
1
7.4
.591
.200
.039
.291
1.6
.0.63
12 10
9
8
7
–
–
6
8.2
3.16
.124
8.4
.323
.331
+
+
7.24
.285
5.08
.200
9.4±0.5
.370±.020
0.5
0.65
.026
.020
1
3
4
5
0.25
.010
2.54
.100
5.08
.200
0.3
.012
For glue-pad
Direction indication
15
.591
15
.591
7.4
SL type
SS type
5.08
.200
.291
2.54
1
.100
.039
8.2
Max.
10.0
.390
.323
3.16
.124
0.5
7.24
.285
5.08
.200
9.4±0.5
.370±.020
0.65
.026
.020
0.25
.010
2.54
.100
5.08
.200
15
.591
7.4
5.08
.200
2.54
.100
.291
1
.039
8.2
Max.
10.0
.390
2.16
.085
.323
6.24
.285
0.5
5.08
.200
0.65
.026
.020
0.25
.010
2.54
.100
5.08
.200
7.4±0.5
.291±.020
General tolerance: ±0.3 ±.012
Tolerance: ±0.1 ±.004
157
TX
REFERENCE DATA
1. Maximum switching capacity
2. Life curve
3. Mechanical life
Tested sample: TX2-5V, 10 pcs.
Operating frequency: 180 cpm
100
90
3.0
2.0
100
50
80
Pick-up voltage
Max.
Min.
70
60
50
40
30
20
10
0
DC resistive load
1.0
30
20
30V DC
resistive load
0.5
0.4
0.3
Drop-out voltage
10
0
0.2
Max.
Min.
0
20 30 50
100
200 300
1.0
2.0
10
100
1,000
10,000
Contact voltage, V
No. of operations, ×104
Switching current, A
4. Electrical life
5-(1). Coil temperature rise
Tested sample: TX2-5V, 6 pcs.
Operating frequency: 20 cpm
Tested sample: TX2-5V, 6 pcs.
Point measured: Inside the coil
Ambient temperature: 25°C 77°F, 85°C 185°F
Change of pick-up and drop-out voltage
Change of contact resistance
70
100
90
100
90
80
70
60
50
40
30
20
10
0
+25°C +77°F
+85°C +185°F
60
50
40
30
20
10
0
80
Pick-up voltage
Max.
Min.
70
60
50
2A
2A
Max.
Min.
40
Drop-out voltage
Max.
Min.
0A
0A
30
20
10
0
100 110 120 130 140 150
No. of operate, ×104
1
2
3
4
5
6
7
8
9
10
1
2
3
4
5
6
7
8
9
10
No. of operations, ×104
No. of operations, ×104
5-(2). Coil temperature rise
Tested sample: TX2-48V, 6 pcs.
Point measured: Inside the coil
6-(1). Operate and release time (with diode)
Tested sample: TX2-5V, 10 pcs.
6-(2). Operate and release time (without diode)
Ambient temperature: 25°C 77°F, 70°C 158°F
5
5
70
+25°C +77°F
+70°C +158°F
Operate time
Release time
Operate time
Release time
60
50
40
30
20
10
0
4
4
Max.
Max.
2A
Min.
3
Min.
3
2A
0A
0A
Max.
2
2
Min.
Max.
Min.
1
0
1
0
70
80
90
100 110 120
70
80
90
100 110 120
100 110 120 130 140 150
No. of operations, ×104
Coil applied voltage, %V
Coil applied voltage, %V
7. Distribution of pick-up and drop-out voltage
Tested sample: TX2-5V, 50 pcs.
8. Distribution of set and reset voltage
Tested sample: TX2-L2-12V, 30 pcs.
9. Ambient temperature characteristics
Tested sample: TX2-5V, 5 pcs.
Set voltage
40
Reset voltage
30
15
10
5
Pick-up voltage
Drop-out
voltage
x
x
20
Drop-out voltage
20
Pick-up voltage
–40 –20
0
20 40 60 80
Ambient temperature, °C
10
0
–20
–40
0
0
10 20 30 40 50 60 70 80 90 100
Ratio against the rated voltage, %V
0
10 20 30 40 50 60 70 80 90 100
Ratio against the rated voltage, %V
158
TX
10. Distribution of contact resistance
11-(1). High frequency characteristics
11-(2). High frequency characteristics
Tested sample: TX2-5V, 30 pcs. (30 × 4 contacts)
Tested sample: TX2-12V, 2 pcs.
Isolation characteristics
Tested sample: TX2-12V, 2 pcs.
Insertion loss characteristics
1
3
4
9
5
Terminal
Nos. 4-5, 8-9
35
30
25
20
15
10
5
12 10
8
(BOTTOM VIEW)
100
50
Terminal
Nos. 3-4, 9-10
1.0
0.8
0.6
0.4
0.2
0
10
100
1,000
10
100
1,000
0
20
30
40
50
Frequency, MHz
Contact resistance, mΩ
Frequency, MHz
12-(1). Malfunctional shock (single side stable)
Tested sample: TX2-5V, 6 pcs
12-(2). Malfunctional shock (latching)
Tested sample: TX2-L2-12V, 6 pcs.
Deenergized condition
Energized condition
Reset state
Set state
X
Z
X
X'
Z
X'
Z'
Z'
Y
Y
1000m/s2
Y
1000m/s2
Y
Y'
Y'
X
Z
X
Z
1000m/s2
1000m/s2
1000m/s2
1000m/s2
1000m/s2
Z'
1000m/s2
X'
1000m/s2
Z'
1000m/s2
X'
1000m/s2
1000m/s2
Y'
Y'
13-(1). Influence of adjacent mounting
13-(2). Influence of adjacent mounting
13-(3). Influence of adjacent mounting
ON
5
0
5
5
ON ON
ON
Pick-up voltage
Pick-up voltage
Pick-up voltage
0
0
ON
ON
ON
–5
–5
–5
ON
ON
ON
OFF
OFF OFF
5
0
5
5
0
OFF
OFF
OFF
Drop-out voltage
Drop-out voltage
Drop-out voltage
0
OFF
–5
–5
–5
OFF
OFF
OFF
0
2
4
6
8
10
0
2
4
6
8
10
0
2
4
6
8
10
.079.157.236.315.394
.079.157.236.315.394
.079.157.236.315.394
Inter-relay distance , mm inch
Inter-relay distance , mm inch
Inter-relay distance , mm inch
14. Pulse dialing test
Tested sample: TX2-5V, 6 pcs.
(35 mA 48 V DC wire spring relay load)
Change of pick-up and drop-out voltage
Change of contact resistance
100
90
80
70
60
50
40
30
20
10
0
100
90
80
Circuit
Pick-up voltage
Max.
Min.
70
60
50
40
458 Ω
+
0.08
µF
0.08
µF
Max.
Min.
4
3
48V DC
30
20
10
0
Drop-out voltage
–
Max.
Min.
458 Ω
Wire spring relay
10
20
30
40
50
10
20
30
40
50
No. of operation, ×104
No. of operations, ×104
Note: Data of surface-mount type are the same as those of PC board terminal type.
For Cautions for Use, see Page 178 and 179.
9/1/2000
All Rights Reserved, © Copyright Matsushita Electric Works, Ltd.
Go To Online Catalog
相关型号:
TX2-H-9V-1
Power/Signal Relay, DPDT, Momentary, 0.016A (Coil), 9VDC (Coil), 140mW (Coil), 1A (Contact), 220VDC (Contact), DC Input, DC Output, Through Hole-Straight Mount, ROHS COMPLIANT
PANASONIC
TX2-H-9V-TH
Power/Signal Relay, DPDT, Momentary, 0.016A (Coil), 9VDC (Coil), 140mW (Coil), 7.5A (Contact), 220VDC (Contact), DC Input, AC/DC Output, Through Hole-Straight Mount, ROHS COMPLIANT
PANASONIC
TX2-H-9V-Z
Power/Signal Relay, DPDT, Momentary, 0.016A (Coil), 9VDC (Coil), 140mW (Coil), 2A (Contact), 220VDC (Contact), DC Input, DC Output, Through Hole-Straight Mount
PANASONIC
TX2-L-1.5V-1
Power/Signal Relay, 2 Form C, DPDT, Latched, 0.067A (Coil), 1.5VDC (Coil), 100mW (Coil), 1A (Contact), 220VDC (Contact), DC Input, Random, DC Output, Through Hole-Straight Mount, ROHS COMPLIANT
PANASONIC
TX2-L-1.5V-TH-X
Electromechanical Relay, DPDT, 2.25VDC (Coil), 7.5A (Contact), 220VDC (Contact), Random, AC/DC Output
PANASONIC
TX2-L-1.5V-Z
Power/Signal Relay, 2 Form C, DPDT, Latched, 0.067A (Coil), 1.5VDC (Coil), 100mW (Coil), 2A (Contact), 220VDC (Contact), DC Input, Random, DC Output, Through Hole-Straight Mount,
PANASONIC
TX2-L-12V-1-X
Electromechanical Relay, DPDT, 18VDC (Coil), 1A (Contact), 220VDC (Contact), Random, DC Output
PANASONIC
©2020 ICPDF网 联系我们和版权申明