TX2SA-4.5V [PANASONIC]
Best seller with broad lineup and AC 2000 V breakdown voltage.; 畅销书具有广阔的阵容和交流2000伏的击穿电压。型号: | TX2SA-4.5V |
厂家: | PANASONIC |
描述: | Best seller with broad lineup and AC 2000 V breakdown voltage. |
文件: | 总7页 (文件大小:3371K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Best seller with broad
lineup and AC 2000 V
breakdown voltage.
TX RELAYS
3. Nominal operating power: High
sensitivity of 140mW
8. Sealed construction allows
automatic washing.
By using the highly efficient polar
magnetic circuit “seesaw balance
mechanism”, a nominal operating
power of 140 mW (minimum operating
power of 79 mW) has been achieved.
4. High contact capacity: 2 A 30 V DC
5. Compact size
9. A range of surface-mount types is
also available
SA: Low-profile surface-mount
terminal type
SS: Space saving surface-mount
terminal type
15.0(L) 7.4(W) 8.2(H) .
591(L) .291(W) .323(H)
6. The use of gold-clad twin crossbar
contacts ensures high contact
reliability.
*We also offer a range of products
with AgPd contacts suitable for use
in low level load analog circuits
(max. 10V DC 10 mA).
7. Outstanding vibration and shock
resistance
Functional shock resistance: 750 m/s2
Destructive shock resistance:
1,000 m/s2
Functional vibration resistance:
10 to 55 Hz (at double amplitude of
3.3 mm .130 inch)
Destructive vibration resistance:
10 to 55 Hz (at double amplitude of
5 mm .197 inch)
FEATURES
TYPICAL APPLICATIONS
1. 2,000 V breakdown voltage between
contact and coil
1. Communications (xDSL,
Transmission)
The body block construction of the coil
that is sealed at formation offers a high
breakdown voltage of 2,000 V between
contact and coil, and 1,000 V between
open contacts.
2. Outstanding surge resistance
Surge breakdown voltage between
open contacts:
2. Measurement
3. Security
4. Home appliances, and audio/visual
equipment
5. Automotive equipment
6. Medical equipment
1,500 V 10160 sec. (FCC part 68)
Surge breakdown voltage between
contact and coil:
2,500 V 210 sec. (Bellcore)
ORDERING INFORMATION
TX
2
Contact arrangement
2: 2 Form C
Surface-mount availability
Nil: Standard PC board terminal type
SA: SA type
SS: SS type
Operating function
Nil: Single side stable
L: 1 coil latching
L2: 2 coil latching
LT: 2 coil latching
Terminal shape
Nil: Standard PC board terminal or surface-mount terminal
Nominal coil voltage (DC)*
1.5, 3, 4.5, 5, 6, 9, 12, 24, 48V
Contact material
Nil: Standard contact (Ag+Au clad)
1: AgPd contact (low level load); AgPd+Au clad (stationary), AgPd (movable)
Packing style
Nil: Tube packing
X: Tape and reel (picked from 1/3/4/5-pin side)
Z: Tape and reel packing (picked from the 8/9/10/12-pin side)
Notes: 1. *48 V coil type: Single side stable only
2. In case of 5 V transistor drive circuit, it is recommended to use 4.5 V type relay.
ds_61022_en_tx: 060213D
1
TX
TYPES
1. Standard PC board terminal
Single side stable
Part No.
1 coil latching
Part No.
2 coil latching (L2)
Part No.
2 coil latching (LT)
Part No.
Contact
arrangement
Nominal coil
voltage
1.5V DC
3V DC
TX2-1.5V
TX2-3V
TX2-L-1.5V
TX2-L-3V
TX2-L-4.5V
TX2-L-5V
TX2-L-6V
TX2-L-9V
TX2-L-12V
TX2-L-24V
—
TX2-L2-1.5V
TX2-L2-3V
TX2-L2-4.5V
TX2-L2-5V
TX2-L2-6V
TX2-L2-9V
TX2-L2-12V
TX2-L2-24V
—
TX2-LT-1.5V
TX2-LT-3V
TX2-LT-4.5V
TX2-LT-5V
TX2-LT-6V
TX2-LT-9V
TX2-LT-12V
TX2-LT-24V
—
4.5V DC
5V DC
TX2-4.5V
TX2-5V
2 Form C
6V DC
TX2-6V
9V DC
TX2-9V
12V DC
24V DC
48V DC
TX2-12V
TX2-24V
TX2-48V
Standard packing: Tube: 40 pcs.; Case: 1,000 pcs.
Note: Please add “-1” to the end of the part number for AgPd contacts (low level load).
2. Surface-mount terminal
1) Tube packing
Single side stable
Part No.
1 coil latching
Part No.
2 coil latching (L2)
Part No.
2 coil latching (LT)
Part No.
Contact
arrangement
Nominal coil
voltage
1.5V DC
3V DC
TX2S-1.5V
TX2S-3V
TX2S-4.5V
TX2S-5V
TX2S-6V
TX2S-9V
TX2S-12V
TX2S-24V
TX2S-48V
TX2S-L-1.5V
TX2S-L-3V
TX2S-L-4.5V
TX2S-L-5V
TX2S-L-6V
TX2S-L-9V
TX2S-L-12V
TX2S-L-24V
—
TX2S-L2-1.5V
TX2S-L2-3V
TX2S-L2-4.5V
TX2S-L2-5V
TX2S-L2-6V
TX2S-L2-9V
TX2S-L2-12V
TX2S-L2-24V
—
TX2S-LT-1.5V
TX2S-LT-3V
TX2S-LT-4.5V
TX2S-LT-5V
TX2S-LT-6V
TX2S-LT-9V
TX2S-LT-12V
TX2S-LT-24V
—
4.5V DC
5V DC
2c
6V DC
9V DC
12V DC
24V DC
48V DC
: For each surface-mounted terminal identification, input the following letter. SA type: A, SS type: S
Standard packing: Tube: 40 pcs.; Case: 1,000 pcs.
Note: Please add “-1” to the end of the part number for AgPd contacts (low level load).
2) Tape and reel packing
Single side stable
Part No.
1 coil latching
Part No.
2 coil latching (L2)
Part No.
2 coil latching (LT)
Part No.
Contact
arrangement
Nominal coil
voltage
1.5V DC
3V DC
TX2S-1.5V-Z
TX2S-3V-Z
TX2S-4.5V-Z
TX2S-5V-Z
TX2S-6V-Z
TX2S-9V-Z
TX2S-12V-Z
TX2S-24V-Z
TX2S-48V-Z
TX2S-L-1.5V-Z
TX2S-L-3V-Z
TX2S-L-4.5V-Z
TX2S-L-5V-Z
TX2S-L-6V-Z
TX2S-L-9V-Z
TX2S-L-12V-Z
TX2S-L-24V-Z
—
TX2S-L2-1.5V-Z
TX2S-L2-3V-Z
TX2S-L2-4.5V-Z
TX2S-L2-5V-Z
TX2S-L2-6V-Z
TX2S-L2-9V-Z
TX2S-L2-12V-Z
TX2S-L2-24V-Z
—
TX2S-LT-1.5V-Z
TX2S-LT-3V-Z
TX2S-LT-4.5V-Z
TX2S-LT-5V-Z
TX2S-LT-6V-Z
TX2S-LT-9V-Z
TX2S-LT-12V-Z
TX2S-LT-24V-Z
—
4.5V DC
5V DC
2 Form C
6V DC
9V DC
12V DC
24V DC
48V DC
: For each surface-mounted terminal identification, input the following letter. SA type: A, SS type: S
Standard packing: Tape and reel: 500 pcs.; Case: 1,000 pcs.
Notes: 1. Tape and reel packing symbol “-Z” is not marked on the relay. “X” type tape and reel packing (picked from 1/2/3/4-pin side) is also available.
2. Please add “-1” to the end of the part number for AgPd contacts (low level load).
ds_61022_en_tx: 060213D
2
TX
RATING
1. Coil data
1) Single side stable
Nominal operating
current
[10%] (at 20C 68F)
Nominal coil
voltage
Pick-up voltage
(at 20C 68F)
Drop-out voltage
(at 20C 68F)
Coil resistance
[10%] (at 20C 68F)
Nominal operating
power
Max. applied voltage
(at 20C 68F)
1.5V DC
3V DC
93.8mA
46.7mA
31mA
16
64.3
145
4.5V DC
5V DC
28.1mA
23.3mA
15.5mA
11.7mA
5.8mA
178
150%V of
nominal voltage
140mW
270mW
75%V or less of
nominal voltage*
(Initial)
10%V or more of
nominal voltage*
(Initial)
6V DC
257
9V DC
579
12V DC
24V DC
1,028
4,114
120%V of
nominal voltage
48V DC
5.6mA
8,533
2) 1 coil latching
Nominal operating
current
[10%] (at 20C 68F)
Nominal coil
voltage
Set voltage
(at 20C 68F)
Reset voltage
(at 20C 68F)
Coil resistance
[10%] (at 20C 68F)
Nominal operating
power
Max. applied voltage
(at 20C 68F)
1.5V DC
3V DC
66.7mA
33.3mA
22.2mA
20mA
22.5
90
4.5V DC
5V DC
202.5
250
75%V or less of
nominal voltage*
(Initial)
75%V or less of
nominal voltage*
(Initial)
150%V of
nominal voltage
100mW
6V DC
16.7mA
11.1mA
8.3mA
360
9V DC
810
12V DC
24V DC
1,440
5,760
4.2mA
3) 2 coil latching (L2, LT)
Nominal operating
current
[10%] (at 20C 68F)
Coil resistance
[10%] (at 20C 68F)
Nominal operating
power
Nominal coil
voltage
Set voltage
(at 20C 68F)
Reset voltage
(at 20C 68F)
Max. applied voltage
(at 20C 68F
Set coil
133.9mA
66.7mA
44.5mA
40mA
Reset coil
133.9mA
66.7mA
44.5mA
40mA
Set coil
11.2
45
Reset coil
11.2
45
Set coil
Reset coil
1.5V DC
3V DC
4.5V DC
5V DC
101.2
125
101.2
125
75%V or less of
nominal voltage*
(Initial)
75%V or less of
nominal voltage*
(Initial)
150%V of
nominal voltage
200mW
200mW
6V DC
33.3mA
22.2mA
16.7mA
8.3mA
33.3mA
22.2mA
16.7mA
8.3mA
180
180
9V DC
405
405
12V DC
24V DC
720
720
2,880
2,880
*Pulse drive (JIS C 5442-1986)
ds_61022_en_tx: 060213D
3
TX
2. Specifications
Characteristics
Item
Specifications
Arrangement
2 Form C
Initial contact resistance, max.
Max. 100 m (By voltage drop 6 V DC 1A)
Contact
Standard contact: Ag+Au clad,
AgPd contact (low level load): AgPd+Au clad (stationary), AgPd (movable)
Contact material
Nominal switching capacity
Max. switching power
Standard contact: 2 A 30 V DC, AgPd contact: 1 A 30 V DC (resistive load)
Standard contact: 60 W (DC), AgPd contact: 30 W (DC) (resistive load)
220V DC
Max. switching voltage
Max. switching current
Min. switching capacity (Reference value)1*
Standard contact: 2 A, AgPd contact: 1 A
10A 10mV DC
Rating
Single side stable
140 mW (1.5 to 24 V DC), 270 mW (48 V DC)
100 mW (1.5 to 24 V DC)
Nominal operating
1 coil latching
power
2 coil latching
Insulation resistance (Initial)
Between open contacts
200 mW (1.5 to 24 V DC)
Min. 1,000M (at 500V DC)
Measurement at same location as “Initial breakdown voltage” section.
1,000 Vrms for 1min. (Detection current: 10mA)
2,000 Vrms for 1min. (Detection current: 10mA)
1,000 Vrms for 1min. (Detection current: 10mA)
1,500 V (10160s) (FCC Part 68)
Breakdown voltage
Between contact and coil
(Initial)
Between contact sets
Between open contacts
Surge breakdown
voltage (Initial)
Electrical
characteristics
Between contacts and coil
2,500 V (210s) (Telcordia)
Max. 50C
Temperature rise (at 20C 68F)
(By resistive method, nominal coil voltage applied to the coil; contact carrying current: 2A.)
Max. 4 ms [Max. 4 ms] (Nominal coil voltage applied to the coil, excluding contact bounce
time.)
Operate time [Set time] (at 20C 68F)
Release time [Reset time] (at 20C 68F)
Max. 4 ms [Max. 4 ms] (Nominal coil voltage applied to the coil, excluding contact bounce
time.) (without diode)
Functional
Shock resistance
Min. 750 m/s2 (Half-wave pulse of sine wave: 6 ms; detection time: 10s.)
Min. 1,000 m/s2 (Half-wave pulse of sine wave: 6 ms.)
10 to 55 Hz at double amplitude of 3.3 mm (Detection time: 10s.)
10 to 55 Hz at double amplitude of 5 mm
Destructive
Mechanical
characteristics
Functional
Vibration resistance
Destructive
Mechanical
Electrical
Min. 108 (at 180 cpm)
Min. 105 (2 A 30 V DC resistive), 5105 (1 A 30 V DC resistive) (at 20 cpm)
Expected life
Ambient temperature: –40C to +85C (up to 24 V coil) –40F to +185F (up to 24 V coil)
[–40C to +70C (48 V coil) –40F to +158F (48 V coil)];
Conditions for operation, transport and storage2*
Max. operating speed (at rated load)
Conditions
Unit weight
Humidity: 5 to 85% R.H. (Not freezing and condensing at low temperature)
20 cpm
Approx. 2 g .071 oz
1* This value can change due to the switching frequency, environmental conditions, and desired reliability level, therefore it is recommended to check this with the actual
load. (AgPd contact type is available for low level load switching [10V DC, 10mA max. level].)
2* Refer to “6. Usage, Storage and Transport Conditions“ in AMBIENT ENVIRONMENT section in Relay Technical Information.
REFERENCE DATA
1. Maximum switching capacity
2. Life curve
3. Mechanical life
Tested sample: TX2-5V, 10 pcs.
Operating speed: 180 cpm
100
90
3.0
2.0
100
50
80
Pick-up voltage
Max.
Min.
70
60
50
40
30
20
10
0
DC resistive load
1.0
30
20
30V DC
resistive load
0.5
0.4
0.3
Drop-out voltage
10
0
0.2
Max.
Min.
1.0
2.0
0
20 30 50
100
200 300
10
100
1,000
10,000
Switching current, A
No. of operations, x104
Contact voltage, V
ds_61022_en_tx: 060213D
4
TX
4. Electrical life (2A 30V DC resistive load)
5-(1). Coil temperature rise
Tested sample: TX2-5V, 6 pcs.
Operating speed: 20 cpm
Change of pick-up and drop-out voltage
100
Tested sample: TX2-5V, 6 pcs.
Point measured: Inside the coil
Ambient temperature: 25C 77F, 85C 185F
70
Change of contact resistance
100
+25°C +77°F
+85°C +185°F
90
90
80
70
60
50
40
30
20
10
0
60
50
40
30
20
10
0
80
Pick-up voltage
Max.
70
60
50
40
30
20
10
0
Min.
2A
2A
Max.
Min.
Drop-out voltage
Max.
Min.
0A
0A
150
100 110 120 130 140
1
2
3
4
5
6
7
8
9
10
1
2
3
4
5
6
7
8
9
10
No. of operations, ×104
No. of operations, ×104
Coil applied voltage, %
5-(2). Coil temperature rise
Tested sample: TX2-48V, 6 pcs.
Point measured: Inside the coil
6-(1). Operate and release time (with diode)
Tested sample: TX2-5V, 10 pcs.
6-(2). Operate and release time (without diode)
Tested sample: TX2-5V, 10 pcs.
Ambient temperature: 25C 77F, 70C 158F
70
5
5
+25°C +77°F
+70°C +158°F
Operate time
Release time
Operate time
Release time
60
50
40
30
20
10
0
4
4
Max.
Max.
2A
Min.
3
Min.
3
2A
0A
0A
Max.
2
2
Min.
Max.
Min.
1
0
1
0
100 110 120 130 140 150
Coil applied voltage, %
70
80
90
100 110 120
Coil applied voltage, %V
70
80
90
100 110 120
Coil applied voltage, %V
7. Ambient temperature characteristics
Tested sample: TX2-5V, 5 pcs.
8-(1). High frequency characteristics
(Isolation)
8-(2). High frequency characteristics
(Insertion loss)
Tested sample: TX2-12V, 2 pcs.
Tested sample: TX2-12V, 2 pcs.
40
Drop-out
voltage
x
x
20
100
50
Pick-up voltage
1.0
0.8
0.6
0.4
0.2
–40 –20
0
20 40 60 80
Ambient temperature, °C
–20
–40
10
100
1,000
10
100
1,000
Frequency, MHz
Frequency, MHz
9 Malfunctional shock (single side stable)
Tested sample: TX2-5V, 6 pcs.
10-(1). Influence of adjacent mounting
Tested sample: TX2-12V, 6 pcs.
10-(2). Influence of adjacent mounting
Tested sample: TX2-12V, 6 pcs.
ON
5
0
5
0
ON ON
Deenergized condition
Energized condition
X
Z
X'
Z'
Pick-up voltage
Pick-up voltage
Y
1000m/s2
Y
Y'
ON
X
Z
–5
–5
ON
1000m/s2
2
1000m/s
ON
OFF
OFF OFF
5
0
5
0
Drop-out voltage
Drop-out voltage
1000m/s2
X'
2
1000m/s
Z'
OFF
–5
–5
OFF
2
1000m/s
OFF
Y'
0
2
4
6
8
10
0
2
4
6
8
10
.079.157.236.315.394
.079.157.236.315.394
Inter-relay distance , mm inch
Inter-relay distance , mm inch
ds_61022_en_tx: 060213D
5
TX
11. Pulse dialing test
Tested sample: TX2-5V, 6 pcs.
(35 mA 48 V DC wire spring relay load)
Change of pick-up and drop-out voltage
Change of contact resistance
100
90
80
70
60
50
40
30
20
10
0
100
90
80
Circuit
Pick-up voltage
Max.
Min.
70
60
50
40
458 Ω
+
0.08
0.08
μF
μF
Max.
Min.
4
3
48V DC
TX
30
20
10
0
Drop-out voltage
–
Max.
Min.
458 Ω
Wire spring relay
10
20
30
40
50
10
20
30
40
50
No. of operation, ×104
No. of operations, ×104
Note: Data of surface-mount type are the same as those of PC board terminal type.
DIMENSIONS (mm inch)
Download CADData from our Web site.
1. Standard PC board terminal
Single side stable and 1 coil latching type
External dimensions
2 coil latching type (L2, LT)
External dimensions
CAD Data
Standard PC board terminal
Standard PC board terminal
15.00
.591
7.40
.291
15.00
.591
7.40
.291
0.65
.026
0.65
.026
8.20
.323
8.20
.323
0.50
.020
1.15 5.08
.045 .200
0.50
.020
1.15 5.08
.045 .200
0.25
.010
0.25
.010
3.50
.138
5.08
.200
2.54
.100
2.54
.100
3.50
.138
5.08
.200
General tolerance: 0.3 .012
General tolerance: 0.3 .012
PC board pattern
(Bottom view)
Schematic (Bottom view)
PC board pattern
(Bottom view)
Schematic (Bottom view)
2 coil latching (L2)
2 coil latching (LT)
Single side stable
1 coil latching
10.16
12.7
1
3
4
5
6
1
3
4
5
6
1
3
4
5
1
3
4 5
.400
2.54
.500
2.54
+
+
–
+
–
–
+
.100
.100
+
–
5.08
.200
5.08
.200
+
12
–
7
–
10
9
8
12
10
9
8
7
12
10
9
8
12
10
9 8
8-1.0 dia.
10-1.0 dia.
Direction indication
Direction indication
Direction indication
Direction indication
8-.039 dia.
10-.039 dia.
(Reset condition)
(Reset condition)
(Deenergized condition)
(Reset condition)
Tolerance: 0.1 .004
Tolerance: 0.1 .004
2. Surface-mount terminal
CAD Data
External dimensions (General tolerance: 0.3 .012)
Single side stable and
1 coil latching type
Suggested mounting pad (Top view) (Tolerance: 0.1 .004)
Type
Single side stable and
2 coil latching type (L2, LT)
1 coil latching type
2 coil latching type (L2, LT)
5.08
.200
2.54
.100
15
7.4
15
7.4
5.08
.200
2.54
.100
.591
.291
.591
.291
1
3.16
.124
1
.039
3.16
.124
.039
8.2
8.4
8.2
8.4
.323
.331
.323
.331
SA type
0.25
.010
0.25
.010
7.24
.285
7.24
.285
0.65
.026
0.65
.026
5.08
.200
5.08
0.5
0.5
.200
.020
5.08
.200
.020
5.08
.200
9.4 0.5
9.4 0.5
2.54
.100
2.54
.100
.370 .020
.370 .020
15
15
7.4
7.4
.591
.591
2.54
.100
.291
.291
5.08
.200
5.08
.200
2.54
.100
1
2.16
.085
1
2.16
.039
8.2
8.2
Max.10
Max.10
.085.039
.323
.323
.394
.394
SS type
0.25
.010
0.25
.010
6.24
.246
6.24
.246
0.65
.026
0.65
.026
5.08
.200
7.4 0.5
5.08
.200
7.4 0.5
0.5
0.5
.020
.020
5.08
.200
5.08
.200
2.54
.100
2.54
.100
.291 .020
.291 .020
ds_61022_en_tx: 060213D
6
TX
Schematic (Top view)
Single side stable
1 coil latching
2 coil latching (L2)
2 coil latching (LT)
12
10
9
8
12
10
9
8
5
12
10
9
8
7
–
–
+
12 10
9
8
7
–
–
6
+
–
+
+
+
–
+
1
3
4
5
1
3
4
5
6
1
3
4
5
1
3
4
Direction indication
Direction indication
Direction indication
Direction indication
(Deenergized condition)
(Reset condition)
(Reset condition)
(Reset condition)
NOTES
1. Packing style
2. Automatic insertion
1) The relay is packed in a tube with the
relay orientation mark on the left side, as
shown in the figure below.
To maintain the internal function of the
relay, the chucking pressure should not
exceed the values below.
Chucking pressure in the direction A:
4.9 N {500gf} or less
Orientation (indicates PIN No.1) stripe
Chucking pressure in the direction B:
9.8 N {1 kgf} or less
Chucking pressure in the direction C:
9.8 N {1 kgf} or less
Stopper (gray)
Stopper (green)
2) Tape and reel packing (surface-mount
terminal type)
C
B
A
(1) Tape dimensions
(i) SA type
mm inch
1.5+0.1 dia.
0
.059+.004 dia.
Relay polarity bar
(Z type)
1.75
.069
0
0.4
2.0
4.0
.016
.079 .157
C
A
B
11.5
.453
Please chuck the
portion.
15.5
.610
Avoid chucking the center of the relay.
In addition, excessive chucking pressure
to the pinpoint of the relay should be
avoided.
10.0 .D394
16.0
.630
0.3
24.0
9.2 0.2
Relays
.012
.945
.362 .008
Tape coming out direction
(ii) SS type
mm inch
1.5+0.1 dia.
0
.059+.004 dia.
Relay polarity bar
(Z type)
2.0
4.0
1.75
.069
0
0.4
.079 .157
.016
11.5
.453
15.5
.610
0.3
16.0
.630
8.0 24.0
.01210.8 0.2
.425 .008
Relays
.945
.315
Tape coming out direction
(2) Dimensions of plastic reel
mm inch
2.0
.079
380 dia.
13 dia.
.512 dia.
21 dia.
.827 dia.
14.961 dia.
80 dia.
3.150 dia.
For Cautions for Use, see Relay Technical Information.
ds_61022_en_tx: 060213D
7
相关型号:
TX2SA-4.5V-1
Power/Signal Relay, 2 Form C, DPDT, Momentary, 0.031A (Coil), 4.5VDC (Coil), 140mW (Coil), 1A (Contact), 220VDC (Contact), DC Input, Random, DC Output, Surface Mount-Straight, ROHS COMPLIANT
PANASONIC
TX2SA-4.5V-1-X
Power/Signal Relay, 2 Form C, DPDT, Momentary, 0.031A (Coil), 4.5VDC (Coil), 140mW (Coil), 1A (Contact), 220VDC (Contact), DC Input, Random, DC Output, Surface Mount-Straight, ROHS COMPLIANT
PANASONIC
TX2SA-4.5V-1-Z
Power/Signal Relay, 2 Form C, DPDT, Momentary, 0.031A (Coil), 4.5VDC (Coil), 140mW (Coil), 1A (Contact), 220VDC (Contact), DC Input, Random, DC Output, Surface Mount-Straight, ROHS COMPLIANT
PANASONIC
TX2SA-4.5V-TH
Power/Signal Relay, DPDT, Momentary, 0.031A (Coil), 4.5VDC (Coil), 140mW (Coil), 7.5A (Contact), 220VDC (Contact), DC Input, AC/DC Output, Surface Mount-Straight, ROHS COMPLIANT
PANASONIC
TX2SA-4.5V-TH-X
Power/Signal Relay, 2 Form C, DPDT, 6.75VDC (Coil), 7.5A (Contact), 220VDC (Contact), DC Input, Random, AC/DC Output
PANASONIC
TX2SA-4.5V-TH-Z
Power/Signal Relay, DPDT, Momentary, 0.031A (Coil), 4.5VDC (Coil), 140mW (Coil), 7.5A (Contact), 220VDC (Contact), DC Input, AC/DC Output, Surface Mount-Straight, ROHS COMPLIANT
PANASONIC
TX2SA-4.5V-X
Power/Signal Relay, 2 Form C, DPDT, Momentary, 0.031A (Coil), 4.5VDC (Coil), 140mW (Coil), 2A (Contact), 220VDC (Contact), DC Input, Random, DC Output, Surface Mount-Straight, ROHS COMPLIANT
PANASONIC
TX2SA-4.5V-Z-1
Power/Signal Relay, DPDT, Momentary, 0.031A (Coil), 4.5VDC (Coil), 140mW (Coil), 1A (Contact), 220VDC (Contact), DC Input, DC Output, Surface Mount-Straight, ROHS COMPLIANT
PANASONIC
TX2SA-48V-1
Power/Signal Relay, 2 Form C, DPDT, Momentary, 0.006A (Coil), 48VDC (Coil), 270mW (Coil), 1A (Contact), 220VDC (Contact), DC Input, Random, DC Output, Surface Mount-Straight, ROHS COMPLIANT
PANASONIC
TX2SA-48V-1-X
Power/Signal Relay, 2 Form C, DPDT, Momentary, 0.006A (Coil), 48VDC (Coil), 270mW (Coil), 1A (Contact), 220VDC (Contact), DC Input, Random, DC Output, Surface Mount-Straight, ROHS COMPLIANT
PANASONIC
©2020 ICPDF网 联系我们和版权申明