TXD2-2M-4.5V-X [PANASONIC]
Electromechanical Relay, DPDT, 5.4VDC (Coil), 1A (Contact), 110VDC (Contact), Random, DC Output,;型号: | TXD2-2M-4.5V-X |
厂家: | PANASONIC |
描述: | Electromechanical Relay, DPDT, 5.4VDC (Coil), 1A (Contact), 110VDC (Contact), Random, DC Output, 继电器 功率继电器 信号继电器 光电二极管 通信 |
文件: | 总7页 (文件大小:124K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
High Breakdown
Voltage Relay
TX-D RELAYS
2. 3,000 V breakdown voltage between
contact and coil.
The body block construction of the coil
that is sealed formation offers a high
breakdown voltage of 3,000 V between
contact and coil.
Destructive vibration resistance:
10 to 55 Hz (at double amplitude of
5 mm .197 inch)
7. Sealed construction allows
automatic washing.
3. Nominal operating power:
High sensitivity of 200mW
By using the highly efficient polar
magnetic circuit “seesaw balance
mechanism”, a nominal operating
power of 200 mW has been achieved.
4. High contact capacity: 2 A 30 V DC
5. High contact reliability achieved
with gold-clad crossbar twin
contacts and the use of gas
expelling materials during
formation.
*We also offer a range of products with
AgPd contacts suitable for use in low
level load analog circuits (Max. 10V
DC 10 mA).
6. Outstanding vibration and shock
resistance.
Functional shock resistance: 750 m/s2
Destructive shock resistance:
1,000 m/s2
TYPICAL APPLICATIONS
1. Facsimile
2. Modem
3. Communications (xDSL)
4. Medical equipment
5. Security
RoHS compliant
FEATURES
1. Approved to the supplementary
insulation class in the EN standards
(EN60950).
The insulation distance between the
contact and coil meet the
supplementary insulation class of the
EN60950 standards as required for
equipment connected to the telephone
lines in Europe.
Satisfies the following conditions:
• Clearances: 2.0 mm .079 inch or
more
Functional vibration resistance:
10 to 55 Hz (at double amplitude of
3.3 mm .130 inch)
• Creepage distance: 2.5 mm .098 inch
or more
ORDERING INFORMATION
TXD 2
Contact arrangement
2: 2 Form C
Surface-mount availability
Nil: Standard PC board terminal
SA: SA type
Operating function
Nil: Single side stable
L: 1 coil latching
Type of operation
Nil: Standard type
2M: M.B.B. type
Nominal coil voltage (DC)
3, 4.5, 5, 6, 9, 12, 24V
Contact material
Nil: Standard contact (Ag+Au clad)
1: AgPd contact (low level load); AgPd+Au clad (stationary), AgPd (movable)
Packing style
Nil: Tube packing
X: Tape and reel (picked from 1/3/4/5-pin side)
Z: Tape and reel packing (Picked from the 8/9/10/12-pin side)
Note: In case of 5 V transistor drive circuit, it is recommended to use 4.5 V type relay.
ASCTB19E 201209-T
Panasonic Corporation Automation Controls Business Unit industrial.panasonic.com/ac/e/
TX-D
TYPES
1. Standard (B.B.M.) type
1) Standard PC board terminal
Single side stable
Part No.
1 coil latching
Part No.
Contact
arrangement
Nominal coil
voltage
3V DC
4.5V DC
5V DC
TXD2-3V
TXD2-L-3V
TXD2-L-4.5V
TXD2-L-5V
TXD2-L-6V
TXD2-L-9V
TXD2-L-12V
TXD2-L-24V
TXD2-4.5V
TXD2-5V
2 Form C
6V DC
TXD2-6V
9V DC
TXD2-9V
12V DC
24V DC
TXD2-12V
TXD2-24V
Standard packing: Tube: 40 pcs.; Case: 1,000 pcs.
Note: Please add “-1” to the end of the part number for AgPd contacts (low level load).
2) Surface-mount terminal
(1) Tube packing
Single side stable
Part No.
1 coil latching
Part No.
Contact
arrangement
Nominal coil
voltage
3V DC
4.5V DC
5V DC
TXD2SA-3V
TXD2SA-4.5V
TXD2SA-5V
TXD2SA-6V
TXD2SA-9V
TXD2SA-12V
TXD2SA-24V
TXD2SA-L-3V
TXD2SA-L-4.5V
TXD2SA-L-5V
TXD2SA-L-6V
TXD2SA-L-9V
TXD2SA-L-12V
TXD2SA-L-24V
2 Form C
6V DC
9V DC
12V DC
24V DC
Standard packing: Tube: 40 pcs.; Case: 1,000 pcs.
Note: Please add “-1” to the end of the part number for AgPd contacts (low level load).
(2) Tape and reel packing
Single side stable
Part No.
1 coil latching
Part No.
Contact
arrangement
Nominal coil
voltage
3V DC
4.5V DC
5V DC
TXD2SA-3V-Z
TXD2SA-4.5V-Z
TXD2SA-5V-Z
TXD2SA-6V-Z
TXD2SA-9V-Z
TXD2SA-12V-Z
TXD2SA-24V-Z
TXD2SA-L-3V-Z
TXD2SA-L-4.5V-Z
TXD2SA-L-5V-Z
TXD2SA-L-6V-Z
TXD2SA-L-9V-Z
TXD2SA-L-12V-Z
TXD2SA-L-24V-Z
2 Form C
6V DC
9V DC
12V DC
24V DC
Standard packing: Tape and reel: 500 pcs.; Case: 1,000 pcs.
Notes: 1. Tape and reel packing symbol “-Z” is not marked on the relay. “X” type tape and reel packing (picked from 1/3/4/5-pin side) is also available.
2. Please add “-1” to the part number for AgPd contacts (low level load). (Ex. TXD2SA-3V-1-Z)
2. M.B.B type
1) Standard PC board terminal
Single side stable
Contact arrangement
Nominal coil voltage
Part No.
3V DC
4.5V DC
5V DC
TXD2-2M-3V
TXD2-2M-4.5V
TXD2-2M-5V
TXD2-2M-6V
TXD2-2M-9V
TXD2-2M-12V
TXD2-2M-24V
2 Form C
6V DC
9V DC
12V DC
24V DC
Standard packing: Tube: 40 pcs.; Case: 1,000 pcs.
ASCTB19E 201209-T
Panasonic Corporation Automation Controls Business Unit industrial.panasonic.com/ac/e/
TX-D
2) Surface-mount terminal
(1) Tube packing
Single side stable
Part No.
Contact arrangement
Nominal coil voltage
3V DC
4.5V DC
5V DC
TXD2SA-2M-3V
TXD2SA-2M-4.5V
TXD2SA-2M-5V
TXD2SA-2M-6V
TXD2SA-2M-9V
TXD2SA-2M-12V
TXD2SA-2M-24V
2 Form C
6V DC
9V DC
12V DC
24V DC
Standard packing: Tube: 40 pcs.; Case: 1,000 pcs.
(2) Tape and reel packing
Single side stable
Part No.
Contact arrangement
Nominal coil voltage
3V DC
4.5V DC
5V DC
TXD2SA-2M-3V-Z
TXD2SA-2M-4.5V-Z
TXD2SA-2M-5V-Z
TXD2SA-2M-6V-Z
TXD2SA-2M-9V-Z
TXD2SA-2M-12V-Z
TXD2SA-2M-24V-Z
2 Form C
6V DC
9V DC
12V DC
24V DC
Standard packing: Tape and reel: 500 pcs.; Case: 1,000 pcs.
Notes: 1. Types designed to withstand strong vibration caused, for example, by the use of terminal cutters, can also be ordered.
However, please contact us if you need parts for use in low level load. (Ex. TXD2SA-2M-3V-1-Z)
2. Tape and reel packing symbol “-Z” is not marked on the relay. “X” type tape and reel packing (picked from 1/3/4/5-pin side) is also available.
RATING
1. Coil data
[Standard (B.B.M.) type]
1) Single side stable
Nominal operating
Nominal coil
voltage
Pick-up voltage
Drop-out voltage
Coil resistance
[ 10%] (at 20°C 68°F)
Nominal operating
power
Max. applied voltage
(at 20°C 68°F)
current
(at 20°C 68°F)
(at 20°C 68°F)
[ 10%] (at 20°C 68°F)
3V DC
4.5V DC
5V DC
66.7mA
44.4mA
40.0mA
33.3mA
22.2mA
16.7mA
9.6mA
45Ω
101Ω
125Ω
180Ω
405Ω
720Ω
2,504Ω
75%V or less of
nominal voltage*
(Initial)
10%V or more of
nominal voltage*
(Initial)
200mW
230mW
120%V of
nominal voltage
6V DC
9V DC
12V DC
24V DC
2) 1 coil latching
Nominal operating
current
[ 10%] (at 20°C 68°F)
Nominal coil
voltage
Set voltage
(at 20°C 68°F)
Reset voltage
(at 20°C 68°F)
Coil resistance
[ 10%] (at 20°C 68°F)
Nominal operating
power
Max. applied voltage
(at 20°C 68°F)
3V DC
4.5V DC
5V DC
50.0mA
33.3mA
30.0mA
25.0mA
16.7mA
12.5mA
7.1mA
60Ω
135Ω
166Ω
240Ω
540Ω
960Ω
3,388Ω
75%V or less of
nominal voltage*
(Initial)
75%V or less of
nominal voltage*
(Initial)
150mW
170mW
120%V of
nominal voltage
6V DC
9V DC
12V DC
24V DC
[M.B.B. type]
Nominal operating
current
[ 10%] (at 20°C 68°F)
Nominal coil
voltage
Pick-up voltage
(at 20°C 68°F)
Drop-out voltage
(at 20°C 68°F)
Coil resistance
[ 10%] (at 20°C 68°F)
Nominal operating
power
Max. applied voltage
(at 20°C 68°F)
3V DC
4.5V DC
5V DC
83.3mA
55.6mA
50.0mA
41.7mA
27.8mA
20.8mA
11.3mA
36Ω
81Ω
100Ω
144Ω
324Ω
576Ω
2,133Ω
75%V or less of
nominal voltage*
(Initial)
10%V or more of
nominal voltage*
(Initial)
250mW
270mW
120%V of
nominal voltage
6V DC
9V DC
12V DC
24V DC
*Pulse drive (JIS C 5442-1986)
ASCTB19E 201209-T
Panasonic Corporation Automation Controls Business Unit industrial.panasonic.com/ac/e/
TX-D
2. Specifications
Characteristics
Item
Specifications
Arrangement
2 Form C
2 Form D (M.B.B.type)
Contact resistance (Initial)
Max. 100 mΩ (By voltage drop 6 V DC 1A)
Standard contact: Ag+Au clad,
AgPd contact (low level load): AgPd+Au clad (stationary), AgPd (movable)
Contact
Contact material
Standard contact: 2 A 30 V DC,
1 A 30 V DC (resistive load)
Nominal switching capacity
Max. switching power
AgPd contact: 1 A 30 V DC (resistive load)
Standard contact: 60 W (DC),
30 W (DC) (resistive load)
AgPd contact: 30 W (DC) (resistive load)
Max. switching voltage
220 V DC
110 V DC
1 A
Rating
Max. switching current
Standard contact: 2 A, AgPd contact: 1 A
Min. switching capacity (Reference value)*1
10µA10mV DC
Single side stable
1 coil latching
200mW (3 to 12 V DC), 230mW (24 V DC)
150mW (3 to 12 V DC), 170mW (24 V DC)
250mW (1.5 to 12 V DC), 270mW (24 V DC)
—
Nominaloperating
power
Insulation resistance (Initial)
Min. 1,000MΩ (at 500V DC) Measurement at same location as “Initial breakdown voltage” section.
Between open contacts
1,000 Vrms for 1min. (Detection current: 10mA)
3,000 Vrms for 1min. (Detection current: 10mA)
500 Vrms for 1min. (Detection current: 10mA)
3,000 Vrms for 1min. (Detection current: 10mA)
Breakdown
voltage (Initial)
Between contact and coil
Between contact sets
Between open contacts
1,000 Vrms for 1min. (Detection current: 10mA)
1,500 V (10×160µs) (FCC Part 68)
—
Surge breakdown
voltage (Initial)
Between contacts and
coil*1
Electrical
characteristics
6,000 V, 1.2 × 50µs
Max. 50°C 122°F
(By resistive method, nominal coil voltage applied to the coil;
contact carrying current: 2A [1A: M.B.B.].)
Temperature rise (at 20°C 68°F)
Operate time [Set time] (at 20°C 68°F)
Release time [Reset time] (at 20°C 68°F)
Max. 4 ms [Max. 4 ms] (Nominal coil voltage applied to the coil, excluding contact bounce time.)
Max. 4 ms [Max. 4 ms] (Nominal coil voltage applied to the coil, excluding contact bounce time.)
(without diode)
Min. 750 m/s2
(Half-wave pulse of sine wave: 6 ms;
detection time: 10µs.)
Min. 500 m/s2
(Half-wave pulse of sine wave: 11 ms;
detection time: 10µs.)
Functional
Shock
resistance
Mechanical
characteristics
Destructive
Functional
Destructive
Min. 1,000 m/s2 {100G} (Half-wave pulse of sine wave: 6 ms.)
10 to 55 Hz at double amplitude of 3.3 mm (Detection time: 10µs.)
Vibration
resistance
10 to 55 Hz at double amplitude of 5 mm
Mechanical
Electrical
Min. 108 (at 180 cpm)
Min. 107 (at 180 cpm)
Min. 105 (2 A 30 V DC resistive),
Expected life
Min. 105 (1 A 30 V DC resistive) (at 20 cpm)
Min. 5×105 (1 A 30 V DC resistive) (at 20 cpm)
Conditions for operation, transport and
storage*2
Ambient temperature: –40°C to +85°C –40°F to +185°F;
Humidity: 5 to 85% R.H. (Not freezing and condensing at low temperature)
Conditions
Unit weight
Max. operating speed (at rated load)
20 cpm
Approx. 2 g .071 oz
Notes: *1 This value can change due to the switching frequency, environmental conditions, and desired reliability level, therefore it is recommended to check this with the
actual load. (AgPd contact type is available for low level load switching [10V DC, 10mA max. level])
*2 The upper operation ambient temperature limit is the maximum temperature that can satisfy the coil temperature rise value.Refer to [6] AMBIENT ENVIRONMENT
in GENERAL APPLICATION GUIDELINES (Page 24).
REFERENCE DATA
1. Maximum switching capacity
2. Life curve
3. Mechanical life
Tested sample: TXD2-5V, 10 pcs.
Operating speed: 180 cpm
100
90
3.0
2.0
100
50
Pick-up voltage
Drop-out voltage
80
70
60
50
40
30
20
10
0
Max.
Min.
DC resistive load
1.0
30
20
30V DC
0.5
0.4
resistive load
Max.
Min.
0.3
10
0
0.2
0
10
100
1000
10000
0
20 30 50
100
200 300
1.0
2.0
No. of operations, ×104
Contact voltage, V
Switching current, A
ASCTB19E 201209-T
Panasonic Corporation Automation Controls Business Unit industrial.panasonic.com/ac/e/
TX-D
4. Electrical life (2 A 30 V DC resistive load)
5-(1). Coil temperature rise
Tested sample: TXD2-5V, 6 pcs.
Operating speed: 20 cpm
Change of pick-up and drop-out voltage
Tested sample: TXD2-5V, 6 pcs.
Measured portion: Inside the coil
Ambient temperature: 25°C 77°F, 70°C 158°F
Change of contact resistance
100
90
100
90
80
70
60
50
40
30
20
10
0
70
+25°C +77°F
+70°C +158°F
60
50
40
30
20
10
0
Pick-up voltage
Drop-out voltage
80
70
60
50
40
30
20
10
0
Max.
Min.
Max.
Min.
2A
2A
Max.
Min.
0A
0A
0
2
4
6
8
10
0
2
4
6
8
10
100
110
120
No. of operations, ×104
No. of operations, ×104
Coil applied voltage, %V
5-(2). Coil temperature rise
Tested sample: TXD2-24V, 6 pcs.
Measured portion: Inside the coil
6-(1). Operate/release time characteristics
(with diode)
Tested sample: TXD2-5V, 10 pcs.
6-(2). Operate/release time characteristics
(without diode)
Tested sample: TXD2-5V, 10 pcs.
Ambient temperature: 25°C 77°F, 70°C 158°F
5
5
70
+25°C +77°F
+70°C +158°F
Operate time
Release time
Operate time
Release time
60
50
40
30
20
10
0
4
4
Max.
Max.
Min.
3
Min.
3
2A
2A
Max.
2
2
0A
0A
Min.
Max.
Min.
1
1
0
0
100
110
120
70
80
90
100 110 120
70
80
90
100 110 120
Coil applied voltage, %V
Coil applied voltage, %V
Coil applied voltage, %V
7. Ambient temperature characteristics
Tested sample: TXD2-5V, 5 pcs.
8. High-frequency characteristics
(Isolation)
9. High-frequency characteristics
(Insertion loss)
Tested sample: TXD2-12V, 2 pcs.
Tested sample: TXD2-12V, 2 pcs.
40
x
20
100
50
Drop-out voltage
x
1.0
0.8
0.6
0.4
0.2
Pick-up voltage
–40 –20
0
20 40 60 80
Ambient temperature, °C
–20
–40
0
10
100
1,000
0
10
100
1,000
Frequency, MHz
Frequency, MHz
10. Malfunctional shock (single side stable)
Tested sample: TXD2-5V, 6 pcs
11-(1). Influence of adjacent mounting
Tested sample: TXD2-12V, 6 pcs.
11-(2). Influence of adjacent mounting
Tested sample: TXD2-12V, 6 pcs.
Deenergized
X
Z
X'
ON
Y
condition
Z'
5
0
5
ON ON
Y
2
Energized condition
1000m/s
Pick-up voltage
Y'
0
X
Z
Pick-up voltage
2
2
ON
1000m/s
1000m/s
–5
–5
ON
ON
OFF
OFF OFF
5
0
5
2
2
1000m/s
Z'
1000m/s
X'
Drop-out voltage
0
Drop-out voltage
OFF
2
1000m/s
Y'
–5
OFF
–5
OFF
0
2
4
6
8
10
0
2
4
6
8
10
.079.157.236.315.394
Inter-relay distance , mm inch
.079.157.236.315.394
Inter-relay distance , mm inch
ASCTB19E 201209-T
Panasonic Corporation Automation Controls Business Unit industrial.panasonic.com/ac/e/
TX-D
12.Actual load test (35 mA 48V DC wire spring
relay load)
Tested sample: TXD2-5V, 6 pcs.
Change of pick-up and drop-out voltage
Change of contact resistance
100
90
100
90
80
70
60
50
40
30
20
10
0
80
Circuit
Pick-up voltage
Max.
Min.
70
60
50
458 Ω
+
0.08
µF
0.08
µF
4
3
48 V DC
TXD
Drop-out voltage
40
Max.
Min.
30
20
10
0
–
Max.
Min.
458 Ω
Wire spring relay
0
10
20
30
40
50
0
10
20
30
40
50
No. of operation, ×104
No. of operation, ×104
13-(1). Distribution of M.B.B. time
Tested sample: TXD2-2M-5V, 50 pcs.
Terminal No. 3-4-5: ON
Terminal No. 3-4-5: OFF
60
60
x:
300.5 µs
x:
298.8 µs
σn-1: 55.3 µs
Min.: 165 µs
Max.: 415 µs
σn-1: 51.8 µs
Min.: 205 µs
Max.: 432 µs
50
40
30
20
50
40
30
20
10
0
22
16
13
12
12
10
8
7
6
2
1
1
0
100 150 200 250 300 350 400 µs min.
150 200 250 300 350 400 450 µs max.
100 150 200 250 300 350 400 µs min.
150 200 250 300 350 400 450 µs max.
13-(2). Distribution of M.B.B. time
Tested sample: TXD2-2M-5V, 50 pcs.
Terminal No. 8-9-10: ON
14. Surge breakdown voltage test
Tested sample: TXD2-3V, 30 pcs.
Terminal No. 8-9-10: OFF
14
12
10
8
60
60
50
40
30
20
10
0
x:
293.4 µs
x:
281.4 µs
σn-1: 60.4 µs
Min.: 155 µs
Max.: 445 µs
σn-1: 58.3 µs
Min.: 120 µs
Max.: 421 µs
50
40
30
20
10
0
6
19
18
15
4
10
10
2
0
6
5
4
4
4
3
1
1
100 150 200 250 300 350 400 µs min.
150 200 250 300 350 400 450 µs max.
100 150 200 250 300 350 400 µs min.
150 200 250 300 350 400 450 µs max.
7000 7200 7400 7600 7800 8000 8200 8400 8600
Surge breakdown voltage, V
The CAD data of the products with a CAD Data mark can be downloaded from: http://industrial.panasonic.com/ac/e/
DIMENSIONS (mm inch)
1) Standard PC board terminal
CAD Data
External dimensions
PC board pattern
(Bottom view)
Schematic (Bottom view)
Standard PC board terminal
Single side stable
1 coil latching
1
3
4
5
1
3
4
5
8
15.00
.591
7.40
.291
10.16
.400
2.54
+
−
+
.100
0.65
.026
8.20
.323
5.08
.200
−
12
10
9
8
12
10
9
0.50
.020
0.25
.010
Direction indication
Direction indication
8-1.0 dia.
8-.039 dia.
5.08
.200
1.15 5.08
.045 .200
2.54
.100
3.50
.138
(Deenergized condition)
(Reset condition)
Tolerance: 0.1 .004
ASCTB19E 201209-T
Panasonic Corporation Automation Controls Business Unit industrial.panasonic.com/ac/e/
TX-D
2) Surface-mount terminal
CAD Data
External dimensions (General tolerance: 0.3 .012)
Single side stable and 1 coil latching
Suggested mounting pad (Top view) (Tolerance: 0.1 .004)
Single side stable and 1 coil latching
Type
15
.591
7.4
5.08 2.54
.100
.291
.200
1
3.16
.124
.039
8.2
8.4
.323
.331
0.25
.010
SA type
7.24
.285
0.65
.026
5.08
.200
9.4 0.5
0.5
5.08
.200
.020
2.54
.100
.370 .020
Schematic (Top view)
Single side stable
1 coil latching
12
10
9
8
12
10
9
8
5
−
+
−
+
1
3
4
5
1
3
4
Direction indication
Direction indication
(Deenergized condition)
(Reset condition)
NOTES
1. Packing style
3) Ambient temperature when
transporting and during storage with the
product in its original packaging:
–40 to +70°C –40 to +158°F
3. M.B.B. type
1) Tube packing
A small OFF time may be generated by
the contact bounce during contact
switching. Check the actual circuit
carefully.
The relay is packed in a tube with the
relay orientation mark on the left side, as
shown in the figure below.
2. Automatic insertion
To maintain the internal function of the
relay, the chucking pressure should not
exceed the values below.
If the relay is dropped accidentally, check
the appearance and characteristics
including M.B.B. time before use.
Orientation (indicates PIN No.1) stripe
C
B
A
Min. 10µs
Stopper (gray)
Stopper (green)
2) Tape and reel packing (surface-mount
terminal type)
(1) Tape dimensions
mm inch
Chucking pressure in the direction A:
4.9 N {500gf} or less
Chucking pressure in the direction B:
9.8 N {1 kgf} or less
Chucking pressure in the direction C:
9.8 N {1 kgf} or less
500Ω
1.5+0.1 dia.
0
5V DC
.059+.004 dia.
Relay polarity bar
(Z type)
1.75
.069
0
0.4
2.0
4.0
.016
.079 .157
C
A
B
11.5
.453
Measuring condition of M.B.B. time
15.5
.610
10.0 .D394
16.0
.630
0.3
24.0
9.2 0.2
TX-D relays
.012
Please chuck the
portion.
.945
.362 .008
For general cautions for use,
please refer to the “Cautions for
use of Signal Relays” or “General
Application Guidelines”.
Avoid chucking the center of the relay.
In addition, excessive chucking pressure
to the pinpoint of the relay should be
avoided.
Tape coming out direction
(2) Dimensions of plastic reel
mm inch
2.0
.079
13 dia.
.512 dia.
21 dia.
.827 dia.
80 1 dia.
3.150 .039 dia.
380 2 dia.
14.961 .079 dia.
24.4+02
2.0 0.2
.961+0.079
.079 .008
ASCTB19E 201209-T
Panasonic Corporation Automation Controls Business Unit industrial.panasonic.com/ac/e/
相关型号:
TXD2-2M-6V-1-Z
Electromechanical Relay, DPDT, 7.2VDC (Coil), 1A (Contact), 110VDC (Contact), Random, DC Output,
PANASONIC
TXD2-2M-6V-Z
Electromechanical Relay, DPDT, 7.2VDC (Coil), 1A (Contact), 110VDC (Contact), Random, DC Output,
PANASONIC
TXD2-2M-9V-1-X
Electromechanical Relay, DPDT, 10.8VDC (Coil), 1A (Contact), 110VDC (Contact), Random, DC Output,
PANASONIC
TXD2-2M-9V-1-Z
Electromechanical Relay, DPDT, 10.8VDC (Coil), 1A (Contact), 110VDC (Contact), Random, DC Output,
PANASONIC
TXD2-2M-9V-X
Electromechanical Relay, DPDT, 10.8VDC (Coil), 1A (Contact), 110VDC (Contact), Random, DC Output,
PANASONIC
TXD2-2M-9V-Z
Electromechanical Relay, DPDT, 10.8VDC (Coil), 1A (Contact), 110VDC (Contact), Random, DC Output,
PANASONIC
©2020 ICPDF网 联系我们和版权申明