TXD2-L-5V-7 [PANASONIC]
Power/Signal Relay, DPDT, Latched, 0.046A (Coil), 5VDC (Coil), 230mW (Coil), 1A (Contact), 220VDC (Contact), DC Input, DC Output, Through Hole-Straight Mount, ROHS COMPLIANT;
| 型号： | TXD2-L-5V-7 |
| 厂家： | 
PANASONIC |
| 描述： | Power/Signal Relay, DPDT, Latched, 0.046A (Coil), 5VDC (Coil), 230mW (Coil), 1A (Contact), 220VDC (Contact), DC Input, DC Output, Through Hole-Straight Mount, ROHS COMPLIANT 光电二极管 |
| 文件： | 总12页 (文件大小：5129K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
Several part numbers will be discontinued September 30, 2013.
TESTING
High breakdown voltage type
is available (1.5 kV between
open contacts)
TX-D RELAYS
3.
3,000 V breakdown voltage
between contact and coil. (Surge
breakdown voltage 6,000 V type)
The body block construction of the coil
that is sealed formation offers a high
breakdown voltage of 3,000 V between
contact and coil.
TYPICAL APPLICATIONS
1. Facsimile
2. Modem
3. Communications (xDSL)
4. Medical equipment
5. Automotive equipment
6. Security
4. Nominal operating power:
High sensitivity of 200 mW
By using the highly efficient polar
magnetic circuit “seesaw balance
mechanism”, a nominal operating
power of 200 mW has been achieved.
5. High contact capacity: 2 A 30 V DC
6. High contact reliability achieved
with gold-clad crossbar twin
contacts and the use of gas
expelling materials during
formation.
Several part numbers will be discontinued
September 30, 2013.
FEATURES
1.
Lineup now includes high
breakdown voltage type that
achieves breakdown voltage
between open contacts of
1,500 V AC.
*We also offer TX-series relays with
AgPd contacts, suitable for use in low
level load analog circuits.
Surge breakdown voltage between
open contacts:
1,500 V 10 160 sec. (FCC part 68)
Surge breakdown voltage between
contact and coil:
7. Outstanding vibration and shock
resistance.
Functional shock resistance: 750 m/s2
Destructive shock resistance:
1,000 m/s2
6,000 V 1.2 50 sec. (EN60950)
2. Approved to the supplementary
insulation class in the EN standards
(EN60950).
Functional vibration resistance:
10 to 55 Hz (at double amplitude of
3.3 mm .130 inch)
Destructive vibration resistance:
10 to 55 Hz (at double amplitude of
5 mm .197 inch)
The insulation distance between the
contact and coil meet the
supplementary insulation class of the
EN60950 standards as required for
equipment connected to the telephone
lines in Europe.
Satisfies the following conditions:
• Clearances: 2.0 mm .079 inch or
more
• Creepage distance: 2.5 mm .098 inch
or more
8. Sealed construction allows
automatic washing.
9. A range of surface-mount types is
also available.
SA: Low-profile surface-mount
terminal type
SS: Space saving surface-mount
terminal type
10. M.B.B. type available (Surge
breakdown voltage 2,500 V type
only)
ds_61022_en_txd: 150113D
1
TX-D
Several part numbers will be discontinued September 30, 2013.
ORDERING INFORMATION
TXD
2
Contact arrangement
2: 2 Form C
Surface-mount availability
Nil: Standard PC board terminal
SA: SA type
SS: SS type
Operating function
Nil: Single side stable
L: 1 coil latching
Type of operation
Nil: Standard type
2M: M.B.B. type (Surge breakdown voltage 2,500 V and Single side stable type only)
Terminal shape
Nil: Standard PC board terminal or surface-mount terminal
Nominal coil voltage (DC)
1.5, 3, 4.5, 5, 6, 9, 12, 24V
Contact material/Surge breakdown voltage (between contact and coil)/Breakdown (between open contacts)
Nil: Standard contact (Ag+Au clad), 2,500 V/1,000 V
1: AgPd contact (low level load); AgPd+Au clad (stationary), AgPd (movable), 2,500 V/1,000 V
3: Standard contact (Ag+Au clad), 6,000 V/1,500 V
4: AgPd contact (low level load); AgPd+Au clad (stationary), AgPd (movable), 6,000 V/1,500 V
6: Standard contact (Ag+Au clad ), 6,000 V/1,000 V
(Discontinued Sept. 30, 2013)
7: AgPd contact (low level load); AgPd+Au clad (stationary), AgPd (movable), 6,000 V/1,000 V
Packing style
Nil: Tube packing
X: Tape and reel (picked from 1/3/4/5-pin side)
Z: Tape and reel packing (Picked from the 8/9/10/12-pin side)
Note: In case of 5 V transistor drive circuit, it is recommended to use 4.5 V type relay.
Several part numbers will be discontinued September 30, 2013.
TYPES
1. Standard (B.B.M.) type/Surge breakdown voltage (between contact and coil) 2,500 V/ Breakdown voltage (between open
contacts) 1,000 V
1) Standard PC board terminal
Single side stable
Part No.
1 coil latching
Part No.
Contact
arrangement
Nominal coil
voltage
1.5V DC
3V DC
TXD2-1.5V
TXD2-3V
TXD2-L-1.5V
TXD2-L-3V
TXD2-L-4.5V
TXD2-L-5V
TXD2-L-6V
TXD2-L-9V
TXD2-L-12V
TXD2-L-24V
4.5V DC
5V DC
TXD2-4.5V
TXD2-5V
2 Form C
6V DC
TXD2-6V
9V DC
TXD2-9V
12V DC
24V DC
TXD2-12V
TXD2-24V
Standard packing: Tube: 40 pcs.; Case: 1,000 pcs.
Note: Please add “-1” to the end of the part number for AgPd contacts (low level load).
2) Surface-mount terminal
(1) Tube packing
Single side stable
Part No.
1 coil latching
Part No.
Contact
arrangement
Nominal coil
voltage
1.5V DC
3V DC
TXD2S-1.5V
TXD2S-3V
TXD2S-4.5V
TXD2S-5V
TXD2S-6V
TXD2S-9V
TXD2S-12V
TXD2S-24V
TXD2S-L-1.5V
TXD2S-L-3V
TXD2S-L-4.5V
TXD2S-L-5V
TXD2S-L-6V
TXD2S-L-9V
TXD2S-L-12V
TXD2S-L-24V
4.5V DC
5V DC
2 Form C
6V DC
9V DC
12V DC
24V DC
: For each surface-mount terminal identification, input the following letter. SA type: A, SS type: S
Standard packing: Tube: 40 pcs.; Case: 1,000 pcs.
Note: Please add “-1” to the end of the part number for AgPd contacts (low level load).
ds_61022_en_txd: 150113D
2
TX-D
Several part numbers will be discontinued September 30, 2013.
(2) Tape and reel packing
Single side stable
Part No.
1 coil latching
Part No.
Contact
arrangement
Nominal coil
voltage
1.5V DC
3V DC
TXD2S-1.5V-Z
TXD2S-3V-Z
TXD2S-4.5V-Z
TXD2S-5V-Z
TXD2S-6V-Z
TXD2S-9V-Z
TXD2S-12V-Z
TXD2S-24V-Z
TXD2S-L-1.5V-Z
TXD2S-L-3V-Z
TXD2S-L-4.5V-Z
TXD2S-L-5V-Z
TXD2S-L-6V-Z
TXD2S-L-9V-Z
TXD2S-L-12V-Z
TXD2S-L-24V-Z
4.5V DC
5V DC
2 Form C
6V DC
9V DC
12V DC
24V DC
: For each surface-mount terminal identification, input the following letter. SA type: A, SS type: S
Standard packing: Tape and reel: 500 pcs.; Case: 1,000 pcs.
Notes: 1. Tape and reel packing symbol “-Z” is not marked on the relay. “X” type tape and reel packing (picked from 1/3/4/5-pin side) is also available.
2. Please add “-1” to the part number for AgPd contacts (low level load). (Ex. TXD2SA-1.5V-1-Z)
2. M.B.B type/Surge breakdown voltage (between contact and coil) 2,500 V/
Breakdown voltage (between open contacts) 1,000 V
1) Standard PC board terminal
Single side stable
Contact arrangement
Nominal coil voltage
Part No.
1.5V DC
3V DC
TXD2-2M-1.5V
TXD2-2M-3V
TXD2-2M-4.5V
TXD2-2M-5V
TXD2-2M-6V
TXD2-2M-9V
TXD2-2M-12V
TXD2-2M-24V
4.5V DC
5V DC
2 Form C
6V DC
9V DC
12V DC
24V DC
Standard packing: Tube: 40 pcs.; Case: 1,000 pcs.
2) Surface-mount terminal
(1) Tube packing
Single side stable
Part No.
Contact arrangement
Nominal coil voltage
1.5V DC
3V DC
TXD2S-2M-1.5V
TXD2S-2M-3V
TXD2S-2M-4.5V
TXD2S-2M-5V
TXD2S-2M-6V
TXD2S-2M-9V
TXD2S-2M-12V
TXD2S-2M-24V
4.5V DC
5V DC
2 Form C
6V DC
9V DC
12V DC
24V DC
: For each surface-mount terminal identification, input the following letter. SA type: A, SS type: S
Standard packing: Tube: 40 pcs.; Case: 1,000 pcs.
(2) Tape and reel packing
Single side stable
Part No.
Contact arrangement
Nominal coil voltage
1.5V DC
3V DC
TXD2S-2M-1.5V-Z
TXD2S-2M-3V-Z
TXD2S-2M-4.5V-Z
TXD2S-2M-5V-Z
TXD2S-2M-6V-Z
TXD2S-2M-9V-Z
TXD2S-2M-12V-Z
TXD2S-2M-24V-Z
4.5V DC
5V DC
2 Form C
6V DC
9V DC
12V DC
24V DC
: For each surface-mount terminal identification, input the following letter. SA type: A, SS type: S
Standard packing: Tape and reel: 500 pcs.; Case: 1,000 pcs.
Notes: 1. Types designed to withstand strong vibration caused, for example, by the use of terminal cutters, can also be ordered.
However, please contact us if you need parts for use in low level load. (Ex. TXD2SA-2M-1.5V-1-Z)
2. Tape and reel packing symbol “-Z” is not marked on the relay. “X” type tape and reel packing (picked from 1/3/4/5-pin side) is also available.
ds_61022_en_txd: 150113D
3
TX-D
Several part numbers will be discontinued September 30, 2013.
3. Standard (B.B.M.) type/Surge breakdown voltage (between contact and coil) 6,000 V/
Breakdown voltage (between open contacts) 1,000 V
1) Standard PC board terminal
Single side stable
Part No.
1 coil latching
Part No.
Contact
arrangement
Nominal coil
voltage
1.5V DC
3V DC
TXD2-1.5V-6
TXD2-3V-6
TXD2-4.5V-6
TXD2-5V-6
TXD2-6V-6
TXD2-9V-6
TXD2-12V-6
TXD2-24V-6
TXD2-L-1.5V-6
TXD2-L-3V-6
TXD2-L-4.5V-6
TXD2-L-5V-6
TXD2-L-6V-6
TXD2-L-9V-6
TXD2-L-12V-6
TXD2-L-24V-6
4.5V DC
5V DC
2 Form C
6V DC
9V DC
12V DC
24V DC
Standard packing: Tube: 40 pcs.; Case: 1,000 pcs.
Note: Please add “-7” to the end of the part number for AgPd contacts (low level load).
2) Surface-mount terminal
(1) Tube packing
Single side stable
Part No.
1 coil latching
Part No.
Contact
arrangement
Nominal coil
voltage
1.5V DC
3V DC
TXD2S-1.5V-6
TXD2S-3V-6
TXD2S-4.5V-6
TXD2S-5V-6
TXD2S-6V-6
TXD2S-9V-6
TXD2S-12V-6
TXD2S-24V-6
TXD2S-L-1.5V-6
TXD2S-L-3V-6
TXD2S-L-4.5V-6
TXD2S-L-5V-6
TXD2S-L-6V-6
TXD2S-L-9V-6
TXD2S-L-12V-6
TXD2S-L-24V-6
4.5V DC
5V DC
2 Form C
6V DC
9V DC
12V DC
24V DC
: For each surface-mount terminal identification, input the following letter. SA type: A, SS type: S
Standard packing: Tube: 40 pcs.; Case: 1,000 pcs.
Note: Please add “-7” to the end of the part number for AgPd contacts (low level load).
(2) Tape and reel packing
Single side stable
Part No.
1 coil latching
Part No.
Contact
arrangement
Nominal coil
voltage
1.5V DC
3V DC
TXD2S-1.5V-6-Z
TXD2S-3V-6-Z
TXD2S-4.5V-6-Z
TXD2S-5V-6-Z
TXD2S-6V-6-Z
TXD2S-9V-6-Z
TXD2S-12V-6-Z
TXD2S-24V-6-Z
TXD2S-L-1.5V-6-Z
TXD2S-L-3V-6-Z
TXD2S-L-4.5V-6-Z
TXD2S-L-5V-6-Z
TXD2S-L-6V-6-Z
TXD2S-L-9V-6-Z
TXD2S-L-12V-6-Z
TXD2S-L-24V-6-Z
4.5V DC
5V DC
2 Form C
6V DC
9V DC
12V DC
24V DC
: For each surface-mount terminal identification, input the following letter. SA type: A, SS type: S
Standard packing: Tape and reel: 500 pcs.; Case: 1,000 pcs.
Notes: 1. Tape and reel packing symbol “-Z” is not marked on the relay. “X” type tape and reel packing (picked from 1/3/4/5-pin side) is also available.
2. Please add “-7” to the part number for AgPd contacts (low level load). (Ex. TXD2SA-1.5V-7-Z)
ds_61022_en_txd: 150113D
4
TX-D
Several part numbers will be discontinued September 30, 2013.
4.
Standard (B.B.M.) type/Surge breakdown voltage (between contact and coil) 6,000 V/
Breakdown voltage (between open contacts) 1,500 V (High breakdown voltage type)
1) Standard PC board terminal
Single side stable
Part No.
1 coil latching
Part No.
Contact
arrangement
Nominal coil
voltage
1.5V DC
3V DC
TXD2-1.5V-3
TXD2-3V-3
TXD2-4.5V-3
TXD2-5V-3
TXD2-6V-3
TXD2-9V-3
TXD2-12V-3
TXD2-24V-3
TXD2-L-1.5V-3
TXD2-L-3V-3
TXD2-L-4.5V-3
TXD2-L-5V-3
TXD2-L-6V-3
TXD2-L-9V-3
TXD2-L-12V-3
TXD2-L-24V-3
4.5V DC
5V DC
2 Form C
6V DC
9V DC
12V DC
24V DC
Standard packing: Tube: 40 pcs.; Case: 800 pcs.
Note: Please add “-4” to the end of the part number for AgPd contacts (low level load).
2) Surface-mount terminal
(1) Tube packing
Single side stable
Part No.
1 coil latching
Part No.
Contact
arrangement
Nominal coil
voltage
1.5V DC
3V DC
TXD2S-1.5V-3
TXD2S-3V-3
TXD2S-4.5V-3
TXD2S-5V-3
TXD2S-6V-3
TXD2S-9V-3
TXD2S-12V-3
TXD2S-24V-3
TXD2S-L-1.5V-3
TXD2S-L-3V-3
TXD2S-L-4.5V-3
TXD2S-L-5V-3
TXD2S-L-6V-3
TXD2S-L-9V-3
TXD2S-L-12V-3
TXD2S-L-24V-3
4.5V DC
5V DC
2 Form C
6V DC
9V DC
12V DC
24V DC
: For each surface-mount terminal identification, input the following letter. SA type: A, SS type: S
Standard packing: Tube: 40 pcs.; Case: 800 pcs.
Note: Please add “-4” to the end of the part number for AgPd contacts (low level load).
(2) Tape and reel packing
Single side stable
Part No.
1 coil latching
Part No.
Contact
arrangement
Nominal coil
voltage
1.5V DC
3V DC
TXD2SA-1.5V-3-Z
TXD2SA-3V-3-Z
TXD2SA-4.5V-3-Z
TXD2SA-5V-3-Z
TXD2SA-6V-3-Z
TXD2SA-9V-3-Z
TXD2SA-12V-3-Z
TXD2SA-24V-3-Z
TXD2SA-L-1.5V-3-Z
TXD2SA-L-3V-3-Z
TXD2SA-L-4.5V-3-Z
TXD2SA-L-5V-3-Z
TXD2SA-L-6V-3-Z
TXD2SA-L-9V-3-Z
TXD2SA-L-12V-3-Z
TXD2SA-L-24V-3-Z
4.5V DC
5V DC
2 Form C
6V DC
9V DC
12V DC
24V DC
*Only for SA type.
Standard packing: Tape and reel: 500 pcs.; Case: 1,000 pcs.
Notes: 1. Tape and reel packing symbol “-Z” is not marked on the relay. “X” type tape and reel packing (picked from 1/3/4/5-pin side) is also available.
2. Please add “-4” to the part number for AgPd contacts (low level load). (Ex. TXD2SA-1.5V-4-Z)
ds_61022_en_txd: 150113D
5
TX-D
Several part numbers will be discontinued September 30, 2013.
RATING
1. Coil data
[Standard (B.B.M.) type]
1) Single side stable
Nominal operating current
[10%] (at 20C 68F)
Coil resistance
Nominal operating power
[10%] (at 20C 68F)
Surge
Surge
Surge
breakdown
voltage:
6,000 V (High
breakdown
voltage)
Surge
breakdown
voltage:
6,000 V (High
breakdown
voltage)
Pick-up
Nominal coil
voltage
Drop-out
voltage
Max. applied
voltage
(at 20C 68F)
Surge
breakdown
voltage:
2,500V/
Surge
breakdown
voltage:
2,500V/
breakdown
breakdown
voltage:
voltage
(at 20C 68F) (at 20C 68F)
voltage:
6,000 V (High
2,500V/
breakdown
6,000 V
6,000 V
6,000 V
voltage)
1.5V DC
3V DC
132.7mA
66.7mA
44.4mA
40.0mA
33.3mA
22.2mA
16.7mA
9.6mA
187.5mA
93.5mA
62.5mA
56.2mA
46.5mA
31.1mA
23.3mA
12.9mA
11
45
8
32
4.5V DC
5V DC
101
125
180
405
720
2,504
72
75%V or less 10%V or more
120%V of
nominal
voltage
89
200mW
230mW
280mW
310mW
of nominal
voltage*
(Initial)
of nominal
voltage*
(Initial)
6V DC
129
289
514
1,858
9V DC
12V DC
24V DC
2) 1 coil latching
Nominal operating current
[10%] (at 20C 68F)
Coil resistance
[10%] (at 20C 68F)
Nominal operating power
Surge
Surge
Surge
breakdown
voltage:
6,000 V (High
breakdown
voltage)
Surge
Surge
Max. applied
voltage
(at 20C 68F)
Surge
breakdown
voltage:
2,500V/
Nominal coil
voltage
Set voltage
(at 20C 68F) (at 20C 68F)
Reset voltage
breakdown
breakdown
voltage:
breakdown
breakdown
voltage:
voltage:
voltage:
6,000 V (High
2,500V/
6,000 V (High
2,500V/
breakdown
6,000 V
breakdown
6,000 V
6,000 V
voltage)
voltage)
1.5V DC
3V DC
100.0mA
50.0mA
33.3mA
30.0mA
25.0mA
16.7mA
12.5mA
7.1mA
153.1mA
76.9mA
51.1mA
46.3mA
38.5mA
25.6mA
19.2mA
10.4mA
15
60
10
39
4.5V DC
5V DC
135
166
240
540
960
3,388
88
75%V or less 75%V or less
120%V of
nominal
voltage
109
156
352
626
2,304
150mW
170mW
230mW
250mW
of nominal
voltage*
(Initial)
of nominal
voltage*
(Initial)
6V DC
9V DC
12V DC
24V DC
[M.B.B. type]
Nominal operating
current
[10%] (at 20C 68F)
Nominal coil
voltage
Pick-up voltage
(at 20C 68F)
Drop-out voltage
(at 20C 68F)
Coil resistance
[10%] (at 20C 68F)
Nominal operating
power
Max. applied voltage
(at 20C 68F)
1.5V DC
3V DC
166.7mA
83.3mA
55.6mA
50.0mA
41.7mA
27.8mA
20.8mA
11.3mA
9
36
4.5V DC
5V DC
81
75%V or less of
nominal voltage*
(Initial)
10%V or more of
nominal voltage*
(Initial)
100
144
324
576
2,133
250mW
270mW
120%V of
nominal voltage
6V DC
9V DC
12V DC
24V DC
*Pulse drive (JIS C 5442-1986)
*Only for surge breakdown voltage of 2,500 V.
ds_61022_en_txd: 150113D
6
TX-D
Several part numbers will be discontinued September 30, 2013.
2. Specifications
Characteristics
Item
Specifications
Arrangement
2 Form C
2 Form D (M.B.B.type)*1
Contact resistance (Initial)
Max. 100 m (By voltage drop 6 V DC 1A)
Contact
Standard contact: Ag+Au clad,
AgPd contact (low level load): AgPd+Au clad (stationary), AgPd (movable)
Contact material
Standard contact: 2 A 30 V DC,
1 A 30 V DC (resistive load)
Nominal switching capacity
Max. switching power
AgPd contact: 1 A 30 V DC (resistive load)
Standard contact: 60 W (DC),
30 W (DC) (resistive load)
AgPd contact: 30 W (DC) (resistive load)
Max. switching voltage
220 V DC
110 V DC
1 A
Max. switching current
Standard contact: 2 A, AgPd contact: 1 A
Min. switching capacity (Reference value)*2
10A10mV DC
Surge breakdown voltage
2,500 V and 6,000 V types:
200mW (1.5 to 12 V DC), 230mW (24 V DC)
Surge breakdown voltage
Rating
Single side stable
250mW (1.5 to 12 V DC), 270mW (24 V DC)
6,000 V (High breakdown voltage) type:
280mW (1.5 to 12 V DC), 310mW (24 V DC)
Nominaloperating
power
Surge breakdown voltage
2,500 V and
6,000 V types:
150mW (1.5 to 12 V DC), 170mW (24 V DC)
Surge breakdown voltage
6,000 V (High breakdown voltage) type:
230mW (1.5 to 12 V DC), 250mW (24 V DC)
1 coil latching
Insulation resistance (Initial)
Between open contacts
—
Min. 1,000M (at 500V DC) Measurement at same location as “Initial breakdown voltage” section.
Surge breakdown voltage
2,500 V and
6,000 V types:
1,000 Vrms for 1min. (Detection current: 10mA)
Surge breakdown voltage
6,000 V (High breakdown voltage) type:
1,500 Vrms for 1min. (Detection current: 10mA)
500 Vrms for 1min. (Detection current: 10mA)
2,000 Vrms for 1min. (Detection current: 10mA)
Breakdown
voltage (Initial)
Surge breakdown voltage 2,500 V type:
2,000 Vrms for 1min. (Detection current: 10mA)
Between contact and coil
Surge breakdown voltage
6,000 V and
6,000 V (High breakdown voltage) types:
3,000 Vrms for 1min. (Detection current: 10mA)
Electrical
characteristics
Between contact sets
Between open contacts
1,000 Vrms for 1min. (Detection current: 10mA)
1,500 V (10160s) (FCC Part 68)
—
Surge breakdown voltage 2,500 V type:
2,500 V, 2 10s (Telcordia)
Surge breakdown voltage 6,000 V and 6,000 V
(High breakdown voltage) types:
6,000 V, 1.2 50s
Surge breakdown
Between contacts and
voltage (Initial)
2,500 V, 2 10s (Telcordia)
coil*1
Max. 50C 122F
(By resistive method, nominal coil voltage applied to the coil;
contact carrying current: 2A [1A: M.B.B.].)
Temperature rise (at 20C 68F)
Operate time [Set time] (at 20C 68F)
Release time [Reset time] (at 20C 68F)
Max. 4 ms [Max. 4 ms] (Nominal coil voltage applied to the coil, excluding contact bounce time.)
Max. 4 ms [Max. 4 ms] (Nominal coil voltage applied to the coil, excluding contact bounce time.)
(without diode)
Min. 750 m/s2
Min. 500 m/s2
Functional
(Half-wave pulse of sine wave: 6 ms;
detection time: 10s.)
(Half-wave pulse of sine wave: 11 ms;
detection time: 10s.)
Shock
resistance
Mechanical
characteristics
Destructive
Functional
Destructive
Min. 1,000 m/s2 {100G} (Half-wave pulse of sine wave: 6 ms.)
10 to 55 Hz at double amplitude of 3.3 mm (Detection time: 10s.)
Vibration
resistance
10 to 55 Hz at double amplitude of 5 mm
Mechanical
Electrical
Min. 108 (at 180 cpm)
Min. 105 (2 A 30 V DC resistive),
Min. 5105 (1 A 30 V DC resistive) (at 20 cpm)
Min. 107 (at 180 cpm)
Expected life
Min. 105 (1 A 30 V DC resistive) (at 20 cpm)
Conditions for operation, transport and
storage*3
Ambient temperature: –40C to +85C –40F to +185F;
Humidity: 5 to 85% R.H. (Not freezing and condensing at low temperature)
Conditions
Unit weight
Max. operating speed (at rated load)
20 cpm
Approx. 2 g .071 oz
*1 M.B.B. type models are only available in 2,500 V surge breakdown voltage type.
*2 This value can change due to the switching frequency, environmental conditions, and desired reliability level, therefore it is recommended to check this with the actual
load. (AgPd contact type is available for low level load switching.)
*3The upper operation ambient temperature limit is the maximum temperature that can satisfy the coil temperature rise value. Refer to “6. Usage, Storage and Transport
Conditions“ in AMBIENT ENVIRONMENT section in Relay Technical Information.
ds_61022_en_txd: 150113D
7
TX-D
Several part numbers will be discontinued September 30, 2013.
REFERENCE DATA
1. Maximum switching capacity
2. Life curve
3. Mechanical life
Tested sample: TXD2-5V, 10 pcs.
Operating speed: 180 cpm
100
90
3.0
2.0
100
50
Pick-up voltage
Drop-out voltage
80
70
60
50
40
30
20
10
0
Max.
Min.
DC resistive load
1.0
30
20
30V DC
0.5
0.4
resistive load
Max.
Min.
0.3
10
0
0.2
1.0
2.0
0
20 30 50
100
200 300
0
10
100
1000
10000
No. of operations, ×104
Switching current, A
Contact voltage, V
4. Electrical life (2 A 30 V DC resistive load)
5-(1). Coil temperature rise
Tested sample: TXD2-5V, 6 pcs.
Operating speed: 20 cpm
Tested sample: TXD2-5V, 6 pcs.
Measured portion: Inside the coil
Ambient temperature: 25C 77F, 70C 158F
Change of pick-up and drop-out voltage
Change of contact resistance
70
100
90
100
90
80
70
60
50
40
30
20
10
0
+25°C +77°F
+70°C +158°F
60
50
40
30
20
10
0
Pick-up voltage
Drop-out voltage
80
70
60
50
40
30
20
10
0
Max.
Min.
Max.
Min.
2A
2A
Max.
Min.
0A
0A
100
110
120
0
2
4
6
8
10
0
2
4
6
8
10
No. of operations, ×104
No. of operations, ×104
Coil applied voltage, %V
5-(2). Coil temperature rise
Tested sample: TXD2-24V, 6 pcs.
Measured portion: Inside the coil
6-(1). Operate/release time characteristics
(with diode)
Tested sample: TXD2-5V, 10 pcs.
6-(2). Operate/release time characteristics
(without diode)
Tested sample: TXD2-5V, 10 pcs.
Ambient temperature: 25C 77F, 70C 158F
70
5
5
+25°C +77°F
+70°C +158°F
Operate time
Release time
Operate time
Release time
60
50
40
30
20
10
0
4
4
Max.
Max.
Min.
3
Min.
3
2A
2A
Max.
2
0A
0A
2
Min.
Max.
Min.
1
1
0
0
100
110
120
70
80
90
100 110 120
70
80
90
100 110 120
Coil applied voltage, %V
Coil applied voltage, %V
Coil applied voltage, %V
7. Ambient temperature characteristics
Tested sample: TXD2-5V, 5 pcs.
8. High-frequency characteristics
(Isolation)
9. High-frequency characteristics
(Insertion loss)
Tested sample: TXD2-12V, 2 pcs.
Tested sample: TXD2-12V, 2 pcs.
40
x
20
100
50
xDrop-out voltage
1.0
0.8
0.6
0.4
0.2
Pick-up voltage
-40 -20
0
20 40 60 80
Ambient temperature, °C
-20
-40
0
10
100
1,000
0
10
100
1,000
Frequency, MHz
Frequency, MHz
ds_61022_en_txd: 150113D
8
TX-D
Several part numbers will be discontinued September 30, 2013.
10. Malfunctional shock (single side stable)
Tested sample: TXD2-5V, 6 pcs
11-(1). Influence of adjacent mounting
Tested sample: TXD2-12V, 6 pcs.
11-(2). Influence of adjacent mounting
Tested sample: TXD2-12V, 6 pcs.
Deenergized
X
Z
X'
ON
ON
Y
condition
Z'
5
0
5
ON ON
Y
2
Energized condition
1000m/s
Pick-up voltage
Y'
0
Pick-up voltage
X
Z
2
2
1000m/s
1000m/s
-5
-5
5
ON
ON
OFF
OFF OFF
5
0
2
2
1000m/s
Z'
1000m/s
X'
Drop-out voltage
0
Drop-out voltage
OFF
2
1000m/s
Y'
-5
OFF
-5
OFF
0
2
4
6
8
10
0
2
4
6
8
10
.079.157.236.315.394
Inter-relay distance , mm inch
.079.157.236.315.394
Inter-relay distance , mm inch
12. Actual load test (35 mA 48 V DC wire spring
relay load)
Tested sample: TXD2-5V, 6 pcs.
Change of pick-up and drop-out voltage
Change of contact resistance
100
90
100
90
80
70
60
50
40
30
20
10
0
80
Circuit
Pick-up voltage
Max.
Min.
70
60
50
458 Ω
+
0.08
F
0.08
F
4
3
48 V DC
Drop-out voltage
40
TXD
Max.
Min.
30
20
10
0
Max.
Min.
–
458 Ω
Wire spring relay
0
10
20
30
40
50
0
10
20
30
40
50
No. of operation, ×104
No. of operation, ×104
13-(1). Distribution of M.B.B. time
Tested sample: TXD2-2M-5V, 50 pcs.
Terminal No. 3-4-5: ON
Terminal No. 3-4-5: OFF
60
60
x:
300.5 μs
x:
298.8 μs
σn-1: 55.3 μs
Min.: 165 μs
Max.: 415 μs
σn-1: 51.8 μs
Min.: 205 μs
Max.: 432 μs
50
40
30
20
10
0
50
40
30
20
22
16
13
12
12
10
8
7
6
2
1
1
0
100 150 200 250 300 350 400 μs min.
150 200 250 300 350 400 450 μs max.
100 150 200 250 300 350 400 μs min.
150 200 250 300 350 400 450 μs max.
13-(2). Distribution of M.B.B. time
Tested sample: TXD2-2M-5V, 50 pcs.
Terminal No. 8-9-10: ON
14.
Surge breakdown voltage test
Tested sample: TXD2-3V-6, 30 pcs.
Terminal No. 8-9-10: OFF
60
60
50
40
30
20
10
0
14
12
10
8
x:
293.4 μs
60.4 μs
x:
281.4 μs
σ
n-1
:
σn-1: 58.3 μs
Min.: 120 μs
Max.: 421 μs
50
40
30
20
10
0
Min.: 155 μs
Max.: 445 μs
6
19
18
15
4
10
10
6
5
4
4
4
2
0
3
1
1
100 150 200 250 300 350 400 μs min.
150 200 250 300 350 400 450 μs max.
100 150 200 250 300 350 400 μs min.
150 200 250 300 350 400 450 μs max.
7000 7200 7400 7600 7800 8000 8200 8400 8600
Surge breakdown voltage, V
ds_61022_en_txd: 150113D
9
TX-D
Several part numbers will be discontinued September 30, 2013.
DIMENSIONS (mm inch)
Download from our Web site.
CADData
1. Surge breakdown voltage 2,500 V and 6,000 V types
1) Standard PC board terminal
External dimensions
Standard PC board terminal
PC board pattern
(Bottom view)
Schematic (Bottom view)
Single side stable
1 coil latching
CAD Data
1
3
4
5
1
3
4
5
8
15.00
.591
7.40
.291
10.16
.400
2.54
+
−
+
.100
0.65
8.20
.026
.323
5.08
.200
−
12
10
9
8
12
10
9
0.50
.020
0.25
.010
Direction indication
Direction indication
8-1.0 dia.
8-.039 dia.
5.08
.200
1.15 5.08
.045 .200
2.54
.100
3.50
.138
2,500 V type
(Deenergized condition)
(Reset condition)
Tolerance: 0.1 .004
CAD Data
6,000 V type
2) Surface-mount terminal
CAD Data
External dimensions (General tolerance: 0.3 .012)
Suggested mounting pad (Top view) (Tolerance: 0.1 .004)
Type
Single side stable and 1 coil latching
Single side stable and 1 coil latching
5.08 2.54
.200
15
.591
7.4
.100
3.16
.124
.291
1
.039
8.2
.323
8.4
.331
0.25
.010
SA type
7.24
.285
0.65
.026
5.08
.200
9.4 0.5
0.5
5.08
.200
.020
2.54
.100
.370 .020
15
.591
7.4
5.08 2.54
.291
.100
.200
1
.039
2.16
.085
8.2
.323
Max.10
.394
SS type
0.25
.010
6.24
.246
0.65
.026
5.08
.200
7.4 0.5
0.5
.020
5.08
.200
2.54
.100
.291 .020
Schematic (Top view)
Single side stable
1 coil latching
12
10
9
8
12
10
9
8
5
−
+
−
+
1
3
4
5
1
3
4
Direction indication
Direction indication
(Deenergized condition)
(Reset condition)
ds_61022_en_txd: 150113D
10
TX-D
Several part numbers will be discontinued September 30, 2013.
2. Surge breakdown voltage 6,000 V (High breakdown voltage type)
1) Standard PC board terminal
External dimensions
PC board pattern
Schematic (Bottom view)
Standard PC board terminal
Single side stable
1 coil latching
(Bottom view)
CAD Data
1
3
4
5
1
3
4
5
8
10.16
.400
7.40
.291
+
−
+
2.54
.100
15.00
.591
5.08
.200
−
12
10
9
8
12
10 9
0.65
9.45
.026
.372
Direction indication
Direction indication
8-1.0 dia.
8-.039 dia.
(Deenergized condition)
(Reset condition)
0.50
Tolerance: 0.1 .004
.020
0.25
.010
1.15 5.08
.045 .200
2.54
.100
3.50
.138
5.08
.200
General tolerance: 0.3 .012
2) Surface-mount terminal
CAD Data
External dimensions (General tolerance: 0.3 .012)
Suggested mounting pad (Top view) (Tolerance: 0.1 .004)
Type
Single side stable and 1 coil latching
Single side stable and 1 coil latching
7.40
.291
5.08 2.54
.200
.100
3.16
.124
1
.039
15.00
.591
0.25
9.45
.372
9.65
.380
SA type
.010
7.24
.285
0.65
.026
5.08
.200
0.50
.020
1.15
.045
5.08
.200
2.54
.100
9.40 0.5
.370 .020
7.40
.291
5.08 2.54
15.00
.591
.100
.200
1
.039
2.16
.085
9.45
0.25
Max. 11.25
.443
SS type
.372
.010
6.24
.246
0.65
5.08
.200
0.50
.020
.026
5.08
.200
1.15
2.54
.100
.045
7.40 0.5
.291 .020
Schematic (Top view)
Single side stable
1 coil latching
12
10
9
8
12
10
9
8
5
−
+
−
+
1
3
4
5
1
3
4
Direction indication
Direction indication
(Deenergized condition)
(Reset condition)
ds_61022_en_txd: 150113D
11
TX-D
Several part numbers will be discontinued September 30, 2013.
NOTES
1. Packing style
3) Ambient temperature when
1) Tube packing
transporting and during storage with the
product in its original packaging:
–40 to +70C –40 to +158F
The relay is packed in a tube with the
relay orientation mark on the left side, as
shown in the figure below.
2. Automatic insertion
To maintain the internal function of the
relay, the chucking pressure should not
exceed the values below.
Orientation (indicates PIN No.1) stripe
C
B
A
Stopper (gray)
Stopper (green)
2) Tape and reel packing (surface-mount
terminal type)
(1) Tape dimensions
(i) SA type
Chucking pressure in the direction A:
4.9 N {500gf} or less
mm inch
Chucking pressure in the direction B:
9.8 N {1 kgf} or less
Chucking pressure in the direction C:
9.8 N {1 kgf} or less
1.5+0.1 dia.
0
.059+.004 dia.
Relay polarity bar
(Z type)
1.75
.069
0
0.4
2.0
4.0
.016
.079 .157
C
A
B
11.5
.453
15.5
.610
Please chuck the
portion.
10.0 .D394
16.0
.630
0.3
24.0
.945
9.2 0.2
TX-D relays
.012
Avoid chucking the center of the relay.
In addition, excessive chucking pressure
to the pinpoint of the relay should be
avoided.
.362 .008
Tape coming out direction
(ii) SS type
mm inch
3. M.B.B. type
1.5+0.1 dia.
A small OFF time may be generated by
the contact bounce during contact
switching. Check the actual circuit
carefully.
If the relay is dropped accidentally, check
the appearance and characteristics
including M.B.B. time before use.
0
.059+.004 dia.
Relay polarity bar
(Z type)
2.0
.079 .157
4.0
1.75
.069
0
0.4
.016
11.5
.453
15.5
.610
0.3
16.0
.630
8.0 24.0
.01210.8 0.2
.425 .008
TX-D relays
.945
.315
Tape coming out direction
(2) Dimensions of plastic reel
Min. 10μs
mm inch
21 0.6 dia.
.827 .024 dia.
0.5
2.0
.020
.079
500Ω
80 1 dia.
3.150 .039 dia.
5V DC
380 2 dia.
14.961 .079 dia.
13 0.5 dia.
Measuring condition of M.B.B. time
.512 .020 dia.
24.4+02
2.0 0.2
.961+0.079
.079 .008
For Cautions for Use, see Relay Technical Information.
ds_61022_en_txd: 150113D
12
相关型号：
TXD2-L-5V-X
Electromechanical Relay, DPDT, 6VDC (Coil), 2A (Contact), 220VDC (Contact), Random, DC Output,Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
PANASONIC
TXD2-L-5V-Z
Electromechanical Relay, DPDT, 6VDC (Coil), 2A (Contact), 220VDC (Contact), Random, DC Output,Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
PANASONIC
TXD2-L-6V
High Breakdown Voltage Relay Communications (xDSL)Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
PANASONIC
TXD2-L-6V-1
Power/Signal Relay, DPDT, Latched, 0.039A (Coil), 6VDC (Coil), 230mW (Coil), 1A (Contact), 220VDC (Contact), DC Input, DC Output, Through Hole-Straight Mount, ROHS COMPLIANTWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
PANASONIC
TXD2-L-6V-1-X
Electromechanical Relay, DPDT, 7.2VDC (Coil), 1A (Contact), 220VDC (Contact), Random, DC Output,Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
PANASONIC
TXD2-L-6V-1-Z
Electromechanical Relay, DPDT, 7.2VDC (Coil), 1A (Contact), 220VDC (Contact), Random, DC Output,Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
PANASONIC
TXD2-L-6V-3
Power/Signal Relay, DPDT, Latched, 0.039A (Coil), 6VDC (Coil), 230mW (Coil), 2A (Contact), 220VDC (Contact), DC Input, DC Output, Through Hole-Straight Mount, ROHS COMPLIANTWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
PANASONIC
TXD2-L-6V-4
Power/Signal Relay, DPDT, Latched, 0.039A (Coil), 6VDC (Coil), 230mW (Coil), 1A (Contact), 220VDC (Contact), DC Input, DC Output, Through Hole-Straight Mount, ROHS COMPLIANTWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
PANASONIC
TXD2-L-6V-6
Power/Signal Relay, DPDT, Latched, 0.039A (Coil), 6VDC (Coil), 230mW (Coil), 2A (Contact), 220VDC (Contact), DC Input, DC Output, Through Hole-Straight Mount, ROHS COMPLIANTWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
PANASONIC
TXD2-L-6V-7
Power/Signal Relay, DPDT, Latched, 0.039A (Coil), 6VDC (Coil), 230mW (Coil), 1A (Contact), 220VDC (Contact), DC Input, DC Output, Through Hole-Straight Mount, ROHS COMPLIANTWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
PANASONIC
TXD2-L-6V-Z
暂无描述Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
PANASONIC
TXD2-L-9V
High Breakdown Voltage Relay Communications (xDSL)Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
PANASONIC
©2020 ICPDF网 联系我们和版权申明