首页 |元器件品牌

TXD2SL-2M-1.5V-X [PANASONIC]

Power/Signal Relay, DPDT, Momentary, 0.167A (Coil), 1.5VDC (Coil), 250mW (Coil), 1A (Contact), 110VDC (Contact), DC Input, DC Output, Surface Mount-Straight;
TXD2SL-2M-1.5V-X
型号： TXD2SL-2M-1.5V-X
厂家： PANASONIC    PANASONIC
描述：

Power/Signal Relay, DPDT, Momentary, 0.167A (Coil), 1.5VDC (Coil), 250mW (Coil), 1A (Contact), 110VDC (Contact), DC Input, DC Output, Surface Mount-Straight

光电二极管
文件： 总7页 (文件大小：210K)
中文：  中文翻译
下载：  下载PDF数据表文档文件
 查看货源
TESTING  
HIGH INSULATION RELAYS  
(Conforming to the  
supplementary insulation class  
of EN Standards (EN41003))  
TX-D  
RELAYS  
FEATURES  
• Approved to the supplementary  
insulation class in the EN standards  
(EN41003).  
The insulation distance between the  
contact and coil meet the supplementary  
insulation class of the EN41003  
standards as required for equipment  
connected to the telephone lines in  
Europe.  
• 2,000 V breakdown voltage between  
contact and coil.  
7.4  
.291  
15  
.591  
8.2  
.323  
• Outstanding surge resistance.  
Surge withstand between open contacts:  
1,500 V 10×160 µsec. (FCC part 68)  
Surge withstand between contact and  
coil: 2,500 V 2×10 µsec. (Telcordia)  
• High contact capacity: 2 A 30 V DC  
(Standard type)  
7.4  
.291  
15  
.591  
8.4  
.333  
mm inch  
Satisfies the following conditions:  
• Clearances: 2.0 mm .079 inch or more  
• Creepage distance: 2.5 mm .098 inch or  
more  
• M.B.B. type available  
• The use of gold-clad twin crossbar  
contacts ensures high contact  
reliability.  
SPECIFICATIONS  
Contact  
Characteristics  
Standard (B.B.M)  
type  
Standard (B.B.M) type  
M.B.B.type  
M.B.B.type  
2 Form D  
Initial insulation resistance*1  
Between open  
Min. 1,000 MΩ (at 500 V DC)  
Arrangement  
2 Form C  
1,000 Vrms for 1 min.  
500 Vrms for 1 min.  
Initial contact resistance, max.  
(By voltage drop 6 V DC 1 A)  
contacts  
Initial  
100 mΩ  
Gold-clad silver  
break-  
down  
voltage*2  
Between contact  
and coil  
2,000 Vrms for 1 min.  
Contact material  
Nominal switching  
capacity (resistive load)  
Between contact  
sets  
2 A 30 V DC  
1 A 30 V DC  
30 W  
1,000 Vrms for 1 min.  
1,500 V  
Max. switching power  
(resistive load)  
Between contacts,  
10 ×160 µs  
60 W  
–
Initial  
surge  
voltage  
[FCC Part 68]  
Max. switching voltage  
Max. switching current  
220 V DC  
2 A  
110 V DC  
1 A  
Between contact  
and coil, 2×10 µs  
2,500 V [Telcordia]  
Temperature rise (at 20°C)  
Max. 50°C*3  
Max. 50°C*4  
Min. switching capacity ❇1  
10 µA 10 mV DC  
Rating  
Max. 4 ms  
(Approx. 2 ms)  
[Max. 4 ms  
200 mW  
(1.5 to 12 V DC)  
230 mW  
250 mW  
(1.5 to 12 V DC)  
270 mW  
Operate time [Set time]*5  
(at 20°C)  
Max. 4 ms  
(Approx. 2 ms)  
Single side  
stable  
Nominal  
(Approx. 2 ms)]  
(24 V DC)  
(24 V DC)  
operating  
Max. 4 ms  
(Approx. 1 ms)  
[Max. 4 ms  
150 mW  
(1.5 to 12 V DC)  
170 mW  
power  
Release time [Reset time]*6  
(at 20°C)  
Max. 4 ms  
(Approx. 1 ms)  
1 coil  
—
latching  
(Approx. 2 ms)]  
(24 V DC)  
M.B.B. time*12  
—
Min. 10 µs  
Mechanical (at 180 cpm)  
108  
107  
Functional  
Shock  
Min. 750 m/s2 {75 G}*7 Min. 500 m/s2 {50 G}*8  
Min. 1,000 m/s2 {100 G}  
105 (2 A 30 V DC  
resistive),  
5 ×105 (1 A 30 V  
DC resistive)  
Expected  
life (min.  
105 (1 A 30 V DC  
resistive)  
Destructive*9  
Functional*10  
Destructive  
resistance  
Electrical (at 20 cpm)  
operations)  
10 to 55 Hz at double amplitude of 3.3 mm  
10 to 55 Hz at double amplitude of 5 mm  
Vibration  
resistance  
Notes:  
Conditions for  
Ambient  
temp. ❇2  
❇1 This value can change due to the switching frequency, environmental conditions,  
and desired reliability level, therefore it is recommended to check this with the  
actual load. (SX relays are available for low level load switching [10 µA 1 mV DC  
– 10 mA 10 V DC])  
–40°C to +85°C –40°F to +185°F  
operation, transport  
and storage*11  
(Not freezing and  
condensing at low  
temperature)  
Humidity  
5 to 85%R.H.  
❇2 The upper limit for the ambient temperature is the maximum temperature that  
can satisfy the coil temperature rise. Under the packing condition, allowable  
temperature range is from –40 to +70°C –40°C to +158°F.  
Unit weight  
Approx. 2 g .071 oz.  
Remarks  
12  
*
*
*
*
*
*
*
*
*
*
*
*
Specifications will vary with foreign standards certification ratings.  
Measurement at same location as “Initial breakdown voltage” section.  
Detection current: 10 mA  
By resistive method; nominal voltage applied to the coil; contact carrying current: 2 A.  
By resistive method; nominal voltage applied to the coil; contact carrying current: 1 A.  
Nominal voltage applied to the coil, excluding contact bounce time.  
Nominal voltage applied to the coil, excluding contact bounce time without diode.  
Half-wave pulse of sine wave: 6 ms.; detection time: 10 µs.  
Half-wave pulse of sine wave: 11 ms.; detection time: 10 µs.  
Half-wave pulse of sine wave: 6 ms.  
*
M.B.B. time:  
Min. 10 µs  
1
2
×
Measuring  
condition  
3
4
5
6
500 Ω  
5 V DC  
7
8
9
10  
11  
Detection time: 10 µs.  
Refer to 6. Conditions for operation, transport and storage mentioned in  
AMBIENT ENVIRONMENT  
All Rights Reserved © COPYRIGHT Matsushita Electric Works, Ltd.  
TX-D  
TYPICAL APPLICATIONS  
• Communications  
• Home appliances, and audio/visual  
equipment  
(XDSL,Transmission)  
• Measurement  
• Security  
• Automotive equipment  
• Medical equipment  
ORDERING INFORMATION  
1) Standard (B.B.M.)type  
Ex. TXD  
2
SA  
–
L
–
–
4.5V  
–
Z
Contact  
arrangement  
Coil voltage  
(DC)  
Surface-mount availability  
Operating function  
Terminal shape  
Nil: Standard PC  
Packing style  
2: 2 Form C Nil: Standard PC board terminal or  
self-clinching terminal  
Nil: Single side  
stable  
1.5, 3, 4.5, 5, Nil: Tube packing  
board terminal 6, 9, 12, 24 V Z: Tape and reel packing  
SA:Standard surface-mount terminal  
SL: High connection reliability surface-mount  
terminal type  
L: 1 coil latching  
or surface-  
mount type  
H: Self-clinching  
terminal  
(Picked from the 8/9/  
10/12-pin side)  
SS:Space saving surface-mount terminal type  
2) M.B.B.type  
Ex. TXD  
2
SA  
–
2M  
–
–
4.5V  
–
Z
Contact  
arrangement  
Coil voltage  
(DC)  
Surface-mount availability  
Operating function  
Terminal shape  
Packing style  
2: 2 Form D Nil: Standard PC board terminal or  
self-clinching terminal  
2M: 2 M.B.B. type Nil: Standard PC  
1.5, 3, 4.5, 5, Nil: Tube packing  
board terminal 6, 9, 12, 24 V Z: Tape and reel packing  
SA:Standard surface-mount terminal  
SL: High connection reliability surface-mount  
terminal type  
or surface-  
mount type  
H: Self- clinching  
terminal  
(Picked from the 8/9/  
10/12-pin side)  
SS:Space saving surface-mount terminal type  
Notes: 1. Tape and reel (picked from 1/3/4/5-pin side) is also available by request. Part number. suffix “-X” is needed when ordering.  
(ex.) TXD2SA-3V-X  
2. Tape and reel packing symbol “-Z” or “-X” are not marked on the relay.  
TYPES AND COIL DATA (at 20°C 68°F)  
1. Standard (B.B.M.) type  
(1) Standard PC board terminal and self-clinching terminal  
1. Single side stable  
Part No. V DC  
Pick-up  
voltage,  
V DC (max.) V DC (min.)  
Drop-out  
voltage,  
Nominal  
operating  
current,  
Nominal  
Max.  
allowable  
voltage,  
V DC  
Coil  
Rating,  
V DC  
Coil  
resistance,  
Ω (±10%)  
operating  
power,  
mW  
Standard PC board  
terminal  
Self-clinching  
terminal  
(initial)  
1.13  
2.25  
3.38  
3.75  
4.5  
(initial)  
0.15  
0.3  
mA (±10%)  
1.5  
3
TXD2-1.5V  
TXD2-H-1.5V  
132.7  
66.7  
44.4  
40.0  
33.3  
22.2  
16.7  
9.6  
11  
45  
200  
200  
200  
200  
200  
200  
200  
230  
1.8  
3.6  
5.4  
6
TXD2-3V  
TXD2-4.5V  
TXD2-5V  
TXD2-6V  
TXD2-9V  
TXD2-12V  
TXD2-24V  
TXD2-H-3V  
TXD2-H-4.5V  
TXD2-H-5V  
TXD2-H-6V  
TXD2-H-9V  
TXD2-H-12V  
TXD2-H-24V  
4.5  
5
0.45  
0.5  
101  
125  
180  
405  
720  
2,504  
6
0.6  
7.2  
10.8  
14.4  
28.8  
9
6.75  
9
0.9  
12  
24  
1.2  
18  
2.4  
2. 1 coil latching  
Coil  
Part No.  
Reset  
voltage,  
V DC (max.)  
(initial)  
Nominal  
operating  
current,  
Nominal  
operating  
power,  
mW  
Max.  
allowable  
voltage,  
V DC  
Set voltage,  
V DC (max.)  
(initial)  
Coil  
resistance,  
Ω (±10%)  
Rating,  
V DC  
Standard PC board  
terminal  
Self-clinching  
terminal  
mA (±10%)  
1.5  
3
TXD2-L-1.5V  
TXD2-L-3V  
TXD2-L-4.5V  
TXD2-L-5V  
TXD2-L-6V  
TXD2-L-9V  
TXD2-L-12V  
TXD2-L-24V  
TXD2-L-H-1.5V  
TXD2-L-H-3V  
TXD2-L-H-4.5V  
TXD2-L-H-5V  
TXD2-L-H-6V  
TXD2-L-H-9V  
TXD2-L-H-12V  
TXD2-L-H-24V  
1.13  
2.25  
3.38  
3.75  
4.5  
1.13  
2.25  
3.38  
3.75  
4.5  
100.0  
50.0  
33.3  
30.0  
25.0  
16.7  
12.5  
7.1  
15  
60  
150  
150  
150  
150  
150  
150  
150  
170  
1.8  
3.6  
4.5  
5
135  
166  
240  
540  
960  
3,388  
5.4  
6
6
7.2  
9
6.75  
9
6.75  
9
10.8  
14.4  
28.8  
12  
24  
18  
18  
Standard packing: Tube: 40 pcs.; Case: 1,000 pcs.  
Note: In case of 5 V transistor drive circuit, it is recommended to use 4.5 V type relay.  
All Rights Reserved © COPYRIGHT Matsushita Electric Works, Ltd.  
TX-D  
(2) Surface-mount terminal  
1. Single side stable  
Part No.  
Pick-up  
voltage,  
V DC (max.) V DC (min.)  
Drop-out  
voltage,  
Nominal  
operating  
current,  
Nominal  
operating  
power,  
mW  
Max.  
allowable  
voltage,  
V DC  
Coil  
Coil  
resistance,  
Ω (±10%)  
Rating,  
Tape and reel  
packing  
Tube packing  
V DC  
(initial)  
1.13  
2.25  
3.38  
3.75  
4.5  
(initial)  
0.15  
0.3  
mA (±10%)  
1.5  
3
TXD2S❇-1.5V  
TXD2S❇-3V  
TXD2S❇-4.5V  
TXD2S❇-5V  
TXD2S❇-6V  
TXD2S❇-9V  
TXD2S❇-12V  
TXD2S❇-24V  
TXD2S❇-1.5V-Z  
TXD2S❇-3V-Z  
TXD2S❇-4.5V-Z  
TXD2S❇-5V-Z  
TXD2S❇-6V-Z  
TXD2S❇-9V-Z  
TXD2S❇-12V-Z  
TXD2S❇-24V-Z  
132.7  
66.7  
44.4  
40.0  
33.3  
22.2  
16.7  
9.6  
11  
45  
200  
200  
200  
200  
200  
200  
200  
230  
1.8  
3.6  
5.4  
6
4.5  
5
0.45  
0.5  
101  
125  
180  
405  
720  
2,504  
6
0.6  
7.2  
10.8  
14.4  
28.8  
9
6.75  
9
0.9  
12  
24  
1.2  
18  
2.4  
2. 1 coil latching  
Part No.  
Reset  
voltage,  
V DC (max.)  
(initial)  
Nominal  
operating  
current,  
Nominal  
operating  
power,  
mW  
Max.  
allowable  
voltage,  
V DC  
Coil  
Rating,  
V DC  
Set voltage,  
V DC (max.)  
(initial)  
Coil  
resistance,  
Ω (±10%)  
Tape and reel  
packing  
Tube packing  
mA (±10%)  
1.5  
3
TXD2S❇-L-1.5V  
TXD2S❇-L-3V  
TXD2S❇-L-4.5V  
TXD2S❇-L-5V  
TXD2S❇-L-6V  
TXD2S❇-L-9V  
TXD2S❇-L-12V  
TXD2S❇-L-24V  
TXD2S❇-L-1.5V-Z  
TXD2S❇-L-3V-Z  
TXD2S❇-L-4.5V-Z  
TXD2S❇-L-5V-Z  
TXD2S❇-L-6V-Z  
TXD2S❇-L-9V-Z  
TXD2S❇-L-12V-Z  
TXD2S❇-L-24V-Z  
1.13  
2.25  
3.38  
3.75  
4.5  
1.13  
2.25  
3.38  
3.75  
4.5  
100.0  
50.0  
33.3  
30.0  
25.0  
16.7  
12.5  
7.1  
15  
60  
150  
150  
150  
150  
150  
150  
150  
170  
1.8  
3.6  
4.5  
5
135  
166  
240  
540  
960  
3,388  
5.4  
6
6
7.2  
9
6.75  
9
6.75  
9
10.8  
14.4  
28.8  
12  
24  
18  
18  
❇: For each surface-mounted terminal variation, input the following letter.  
SA type: A , SL type: L , SS type: S  
Standard packing: Tube: 40 pcs.; Case: 1,000 pcs.  
Tape and reel: 500 pcs.; Case: 1,000 pcs.  
Notes: 1. Tape and reel packing symbol “-Z” is not marked on the relay. “X” type tape and reel packing (picked from 1/3/4/5-pin side) is also available.  
2. In case of 5 V transistor drive circuit, it is recommended to use 4.5 V type relay.  
2. M.B.B.Type  
(1) Standard PC board terminal and self-clinching terminal  
Single side stable  
Part No.  
Nominal  
operating  
current,  
Nominal  
operating  
power,  
mW  
Max.  
allowable  
voltage,  
V DC  
Coil  
Rating,  
V DC  
Pick-up  
voltage,  
V DC (max.) V DC (min.)  
Drop-out  
voltage,  
Coil  
resistance,  
Ω (±10%)  
Standard PC board  
Self-clinching  
terminal  
terminal  
mA (±10%)  
1.5  
3
TXD2-2M-1.5V  
TXD2-2M-3V  
TXD2-2M-4.5V  
TXD2-2M-5V  
TXD2-2M-6V  
TXD2-2M-9V  
TXD2-2M-12V  
TXD2-2M-24V  
TXD2-2M-H-1.5V  
TXD2-2M-H-3V  
TXD2-2M-H-4.5V  
TXD2-2M-H-5V  
TXD2-2M-H-6V  
TXD2-2M-H-9V  
TXD2-2M-H-12V  
TXD2-2M-H-24V  
1.13  
2.25  
3.38  
3.75  
4.5  
0.15  
0.3  
0.45  
0.5  
0.6  
0.9  
1.2  
2.4  
166.7  
83.3  
55.6  
50.0  
41.7  
27.8  
20.8  
11.3  
9
36  
250  
250  
250  
250  
250  
250  
250  
270  
1.8  
3.6  
5.4  
6
4.5  
5
81  
100  
144  
324  
576  
2,133  
6
7.2  
10.8  
14.4  
28.8  
9
6.75  
9
12  
24  
18  
Standard packing: Tube: 40 pcs.; Case: 1,000 pcs.  
(2) Surface-mount terminal  
Single side stable  
Part No.  
Nominal  
operating  
current,  
Nominal  
operating  
power,  
mW  
Max.  
allowable  
voltage,  
V DC  
Coil  
Rating,  
V DC  
Reset  
voltage,  
V DC (min.)  
Coil  
resistance,  
Ω (±10%)  
Set voltage,  
V DC (max.)  
Tape and reel  
packing  
Tube packing  
mA (±10%)  
1.5  
3
TXD2S❇-2M-1.5V  
TXD2S❇-2M-3V  
TXD2S❇-2M-4.5V  
TXD2S❇-2M-5V  
TXD2S❇-2M-6  
TXD2S❇-2M-9  
TXD2S❇-2M-12  
TXD2S❇-2M-24  
TXD2S❇-2M-1.5V-Z  
TXD2S❇-2M-3V-Z  
TXD2S❇-2M-4.5V-Z  
TXD2S❇-2M-5V-Z  
TXD2S❇-2M-6V-Z  
TXD2S❇-2M-9V-Z  
TXD2S❇-2M-12V-Z  
TXD2S❇-2M-24V-Z  
1.13  
2.25  
3.38  
3.75  
4.5  
0.15  
0.3  
0.45  
0.5  
0.6  
0.9  
1.2  
2.4  
166.7  
83.3  
55.6  
50.0  
41.7  
27.8  
20.8  
11.3  
9
36  
250  
250  
250  
250  
250  
250  
250  
270  
1.8  
3.6  
4.5  
5
81  
5.4  
100  
144  
324  
576  
2,133  
6
6
7.2  
9
6.75  
9
10.8  
14.4  
28.8  
12  
24  
18  
❇: For each surface-mounted terminal variation, input the following letter.  
SA type: A , SL type: L , SS type: S  
Standard packing: Tube: 40 pcs.; Case: 1,000 pcs.  
Tape and reel: 500 pcs.; Case: 1,000 pcs.  
Notes: 1. Tape and reel packing symbol “-Z” is not marked on the relay. “X” type tape and reel packing (picked from 1/3/4/5-pin side) is also available.  
2. In case of 5 V transistor drive circuit, it is recommended to use 4.5 V type relay.  
All Rights Reserved © COPYRIGHT Matsushita Electric Works, Ltd.  
TX-D  
DIMENSIONS  
mm inch  
1. Standard PC board terminal and self-clinching terminal  
Standard PC board terminal  
PC board pattern  
(Copper side view)  
Schematic (Bottom view)  
Single side stable  
1 coil latching  
(Deenergized condition)  
(Reset condition)  
15  
7.4  
10.16  
.591  
1
3
4
5
1
3
4 5  
.291  
.400  
2.54  
+
–
–
+
.100  
0.65  
8.2  
.026  
.323  
5.08  
.200  
3.5  
.138  
12  
10  
9
8
12  
10 9 8  
0.5  
0.25  
.010  
.020  
8-1.0 dia  
Direction indication*  
Direction indication*  
5.08  
.200  
8-.039 dia  
1.15  
5.08  
.200  
2.54  
.100  
.045  
*Orientation stride located on top of relay.  
Tolerance: ±0.1 ±.004  
15  
.591  
7.4  
Self clinching terminal  
.291  
0.65  
8.2  
.026  
.323  
3.5  
.138  
0.5  
0.25  
.010  
.020  
5.08  
.200  
1.15  
5.08  
.200  
2.54  
.100  
.045  
General tolerance: ±0.3 ±.012  
2. Surface-mount terminal  
SA type  
Suggested mounting pad  
(Top view)  
Schematic (Top view)  
Single side stable  
(Deenergized condition)  
1 coil latching  
(Reset condition)  
5.08  
.200  
2.54  
.100  
1
15  
.039  
7.4  
.591  
12  
10  
9
8
12  
10  
9
8
.291  
1.6  
.0.63  
+
–
–
+
3.16  
.124  
8.2  
8.4  
7.24  
.323  
.331  
.285  
1
3
4
5
1
3
4
5
5.08  
.200  
9.4±0.5  
.370±.020  
0.5  
0.65  
.026  
.020  
Direction indication  
Direction indication  
0.3  
0.25  
.010  
2.54  
.100  
5.08  
.200  
.012  
For glue-pad  
15  
.591  
15  
.591  
7.4  
SL type  
SS type  
5.08  
.200  
.291  
2.54  
1
.100  
.039  
8.2  
Max.  
10.0  
.390  
.323  
3.16  
.124  
0.5  
7.24  
.285  
5.08  
.200  
9.4±0.5  
.370±.020  
0.65  
.026  
.020  
0.25  
.010  
2.54  
.100  
5.08  
.200  
15  
.591  
7.4  
5.08  
.200  
.291  
2.54  
.100  
1
.039  
8.2  
Max.  
10.0  
.390  
.323  
2.16  
.085  
6.24  
.246  
0.5  
5.08  
.200  
7.4±0.5  
0.65  
.026  
.020  
0.25  
.010  
2.54  
.100  
5.08  
.200  
.291±.020  
General tolerance: ±0.3 ±.012  
Tolerance: ±0.1 ±.004  
REFERENCE DATA  
1. Maximum switching capacity  
2. Life curve  
3. Mechanical life  
Tested sample: TXD2-5V, 10 pcs.  
Operating frequency: 180 cpm  
100  
90  
3.0  
2.0  
100  
Pick-up voltage  
Drop-out voltage  
80  
70  
60  
50  
40  
30  
20  
10  
0
Max.  
Min.  
DC resistive load  
1.0  
50  
30  
20  
30V DC  
0.5  
0.4  
resistive load  
Max.  
Min.  
0.3  
10  
0
0.2  
0
20 30 50  
100  
200 300  
0
10  
100  
1000  
10000  
1.0  
2.0  
No. of operations, ×104  
Contact voltage, V  
Switching current, A  
All Rights Reserved © COPYRIGHT Matsushita Electric Works, Ltd.  
TX-D  
4. Electrical life (2 A 30 V DC resistive load)  
5-(1). Coil temperature rise  
Tested sample: TXD2-5V, 6 pcs.  
Operating frequency: 20 cpm  
Tested sample: TXD2-5V, 6 pcs.  
Measured portion: Inside the coil  
Ambient temperature: 25°C 77°F, 70°C 158°F  
Change of pick-up and drop-out voltage  
Change of contact resistance  
70  
100  
90  
100  
90  
80  
70  
60  
50  
40  
30  
20  
10  
0
25°C +77°F  
+
+
70°C +158°F  
60  
50  
40  
30  
20  
10  
0
Pick-up voltage  
Drop-out voltage  
80  
70  
60  
50  
40  
30  
20  
10  
0
Max.  
Min.  
Max.  
Min.  
2A  
2A  
Max.  
Min.  
0A  
0A  
0
2
4
6
8
10  
0
2
4
6
8
10  
100  
110  
120  
No. of operations, ×104  
No. of operations, ×104  
Coil applied voltage, %V  
5-(2). Coil temperature rise  
Tested sample: TXD2-24V, 6 pcs.  
Measured portion: Inside the coil  
6-(1). Operate/release time characteristics  
(with diode)  
Tested sample: TXD2-5V, 10 pcs.  
6-(2). Operate/release time characteristics  
(without diode)  
Tested sample: TXD2-5V, 10 pcs.  
Ambient temperature: 25°C 77°F, 70°C 158°F  
70  
5
5
25°C +77°F  
70°C +158°F  
+
+
Operate time  
Release time  
Operate time  
Release time  
60  
50  
40  
30  
20  
10  
0
4
4
Max.  
Max.  
Min.  
3
Min.  
3
2A  
2A  
Max.  
2
2
0A  
0A  
Min.  
Max.  
Min.  
1
1
0
0
100  
110  
120  
70  
80  
90  
100 110 120  
70  
80  
90  
100 110 120  
Coil applied voltage, %V  
Coil applied voltage, %V  
Coil applied voltage, %V  
7. Distribution of pick-up and drop-out voltage  
Tested sample: TXD2-5V, 50 pcs.  
8. Distribution of set and reset voltage  
Tested sample: TXD2-L-12V, 30 pcs.  
9. Ambient temperature characteristics  
Tested sample: TXD2-5V, 5 pcs.  
Set voltage  
Reset voltage  
40  
35  
Pick-up voltage  
x
15  
10  
5
30  
20  
Drop-out voltage  
25  
Drop-out voltage  
x
Pick-up voltage  
20  
15  
10  
5
–40 –20  
0
20 40 60 80  
Ambient temperature, °C  
–20  
–40  
0
10 20 30 40 50 60 70 80 90 100  
Ratio against the rated voltage, %V  
0
10 20 30 40 50 60 70 80 90 100  
Ratio against the rated voltage, %V  
10. Distribution of contact resistance  
11-(1). High-frequency characteristics  
11-(2). High-frequency characteristics  
Tested sample: TXD2-5V, 30 pcs. (30 × 4 contacts)  
Isolation characteristics  
Insertion loss characteristics  
Tested sample: TXD2-12V, 2 pcs.  
Tested sample: TXD2-12V, 2 pcs.  
35  
Terminal  
Nos. 4-5, 8-9  
Terminal  
Nos. 3-4, 9-10  
30  
25  
20  
15  
10  
5
100  
50  
1.0  
0.8  
0.6  
0.4  
0.2  
0
10  
100  
1,000  
0
20  
30  
40  
50  
0
10  
100  
1,000  
Frequency, MHz  
Frequency, MHz  
Contact resistance, mΩ  
All Rights Reserved © COPYRIGHT Matsushita Electric Works, Ltd.  
TX-D  
12-(1). Malfunctional shock (single side stable)  
Tested sample: TXD2-5V, 6 pcs  
12-(2). Malfunctional shock (latching)  
Tested sample: TXD2-L-12V, 6 pcs.  
Reset state  
Deenergized  
X
Z
X
Z
X'  
1000m/s  
X'  
1000m/s  
Y
Y
Z'  
Y
Y'  
condition  
Z'  
Y
Y'  
2
2
Set state  
Energized condition  
X
Z
X
Z
2
2
2
2
1000m/s  
1000m/s  
1000m/s  
1000m/s  
2
2
2
2
1000m/s  
Z'  
1000m/s  
X'  
1000m/s  
Z'  
1000m/s  
X'  
2
2
1000m/s  
Y'  
1000m/s  
Y'  
13-(1). Influence of adjacent mounting  
Tested sample: TXD2-12V, 6 pcs.  
13-(2). Influence of adjacent mounting  
Tested sample: TXD2-12V, 6 pcs.  
13-(3). Influence of adjacent mounting  
Tested sample: TXD2-12V, 6 pcs.  
ON  
5
0
5
5
0
ON ON  
Pick-up voltage  
ON  
ON  
ON  
Pick-up voltage  
0
Pick-up voltage  
ON  
–5  
–5  
–5  
ON  
ON  
ON  
OFF  
OFF OFF  
5
0
5
5
0
OFF  
OFF  
OFF  
Drop-out voltage  
Drop-out voltage  
0
Drop-out voltage  
OFF  
–5  
OFF  
–5  
–5  
OFF  
OFF  
0
2
4
6
8
10  
.079.157.236.315.394  
Inter-relay distance , mm inch  
0
2
4
6
8
10  
.079.157.236.315.394  
Inter-relay distance , mm inch  
0
2
4
6
8
10  
.079.157.236.315.394  
Inter-relay distance , mm inch  
14.Actual load test (35 mA 48V DC wire spring  
relay load)  
Tested sample: TXD2-5V, 6 pcs.  
Change of pick-up and drop-out voltage  
Change of contact resistance  
100  
90  
100  
90  
80  
70  
60  
50  
40  
30  
20  
10  
0
80  
Circuit  
Pick-up voltage  
Max.  
Min.  
70  
60  
50  
458 Ω  
+
0.08  
µF  
0.08  
µF  
4
3
48 V DC  
Drop-out voltage  
40  
TXD  
Max  
Min.  
30  
20  
10  
0
Max.  
Min.  
–
458 Ω  
Wire spring relay  
0
10  
20  
30  
40  
50  
0
10  
20  
30  
40  
50  
No. of operation, ×104  
No. of operation, ×104  
15-(1). Distribution of M.B.B. time  
Tested sample: TXD2-2M-5V, 50 pcs.  
Terminal No. 3-4-5: ON  
Terminal No. 3-4-5: OFF  
60  
60  
x:  
300.5 µs  
x:  
298.8 µs  
σn-1: 55.3 µs  
Min.: 165 µs  
Max.: 415 µs  
σn-1: 51.8 µs  
Min.: 205 µs  
Max.: 432 µs  
50  
40  
30  
20  
10  
0
50  
40  
30  
20  
22  
16  
13  
12  
12  
10  
8
7
6
2
1
1
0
100 150 200 250 300 350 400 µs min.  
150 200 250 300 350 400 450 µs max.  
100 150 200 250 300 350 400 µs min.  
150 200 250 300 350 400 450 µs max.  
All Rights Reserved © COPYRIGHT Matsushita Electric Works, Ltd.  
TX-D  
15-(2). Distribution of M.B.B. time  
Tested sample: TXD2-2M-5V, 50 pcs.  
Terminal No. 8-9-10: ON  
Terminal No. 8-9-10: OFF  
60  
60  
x:  
293.4 µs  
x:  
281.4 µs  
σn-1: 60.4 µs  
Min.: 155 µs  
Max.: 445 µs  
σn-1: 50.8 µs  
Min.: 420 µs  
Max.: 421 µs  
50  
40  
30  
20  
10  
0
50  
40  
30  
20  
19  
18  
15  
10  
10  
10  
6
5
4
4
4
3
1
0
1
100 150 200 250 300 350 400 µs min.  
150 200 250 300 350 400 450 µs max.  
100 150 200 250 300 350 400 µs min.  
150 200 250 300 350 400 450 µs max.  
NOTES  
1. Packing style  
2) Tape and reel packing (surface-mount  
terminal type)  
(1) Tape dimensions  
(i) SA type  
(2) Dimensions of plastic reel  
mm inch  
1) The relay is packed in a tube with the  
relay orientation mark on the left side, as  
shown in the figure below.  
21±0.6 dia.  
.827±.024 dia.  
mm inch  
Orientation (indicates PIN No.1)stripe  
2.0±0.5  
.079±.020  
1.5+0.1 dia.  
0
Relay polarity bar  
(Z type)  
.059+.004 dia.  
1.75  
.069  
0
0.4  
.016  
2.0  
4.0  
.079 .157  
100±1 dia.  
C
3.937±.039 dia.  
A
B
11.5  
.453  
15.5  
.610  
370±2 dia.  
Stopper (gray)  
Stopper (green)  
14.567±.079 dia.  
D
TX/TX-D/TX-S  
-SMD relays  
16.0  
.630  
24.0±0.3  
10.0 .394  
9.2±0.2  
.945±.012  
13±0.5 dia.  
.362±.008  
.512±.020 dia.  
24.4+02  
Tape coming out direction  
2.0±0.2  
.961+0.079  
.079±.008  
(ii) SL type  
mm inch  
1.5+0.1 dia.  
0
Relay polarity bar  
(Z type)  
.059+.004 dia.  
1.75  
.069  
0
0.4  
.016  
2.0  
4.0  
.079 .157  
11.5  
.453  
15.5  
.610  
24.0±0.3  
16.0  
.630  
TX/TX-D/TX-S  
-SMD relays  
.945±.012  
10.0  
.394  
10.8±0.2  
.425±.008  
Tape coming out direction  
(iii) SS type  
mm inch  
2.2 dia.  
1.5+0.1 dia.  
.087 dia.  
0
Relay polarity bar  
(Z type)  
.059+.004 dia.  
2.0  
4.0  
1.75  
.069  
0
0.4  
.016  
.079 .157  
11.5  
.453  
15.5  
.610  
8.0 24.0±0.3  
TX/TX-D/TX-S  
-SMD relays  
16.0  
.630  
.945±.012  
.315  
10.8±0.2  
.425±.008  
Tape coming out direction  
For Cautions for Use, see Relay Technical Information  
All Rights Reserved © COPYRIGHT Matsushita Electric Works, Ltd.  

相关型号：

TXD2SL-2M-1.5V-Z

 Power/Signal Relay, DPDT, Momentary, 0.167A (Coil), 1.5VDC (Coil), 250mW (Coil), 1A (Contact), 110VDC (Contact), DC Input, DC Output, Surface Mount-Straight, ROHS COMPLIANT
PANASONIC

TXD2SL-2M-12V

 Power/Signal Relay, DPDT, Momentary, 0.021A (Coil), 12VDC (Coil), 250mW (Coil), 1A (Contact), 110VDC (Contact), DC Input, DC Output, Surface Mount-Straight, ROHS COMPLIANT
PANASONIC

TXD2SL-2M-12V-X

 Power/Signal Relay, DPDT, Momentary, 0.021A (Coil), 12VDC (Coil), 250mW (Coil), 1A (Contact), 110VDC (Contact), DC Input, DC Output, Surface Mount-Straight
PANASONIC

TXD2SL-2M-24

 Power/Signal Relay, DPDT, Momentary, 0.011A (Coil), 24VDC (Coil), 270mW (Coil), 1A (Contact), 30VDC (Contact), DC Input, DC Output, Surface Mount-Straight, ROHS COMPLIANT
PANASONIC

TXD2SL-2M-24V

 Power/Signal Relay, DPDT, Momentary, 0.011A (Coil), 24VDC (Coil), 270mW (Coil), 1A (Contact), 110VDC (Contact), DC Input, DC Output, Surface Mount-Straight, ROHS COMPLIANT
PANASONIC

TXD2SL-2M-3V

 Power/Signal Relay, DPDT, Momentary, 0.083A (Coil), 3VDC (Coil), 250mW (Coil), 1A (Contact), 110VDC (Contact), DC Input, DC Output, Surface Mount-Straight, ROHS COMPLIANT
PANASONIC

TXD2SL-2M-3V-Z

 Power/Signal Relay, DPDT, Momentary, 0.083A (Coil), 3VDC (Coil), 250mW (Coil), 1A (Contact), 110VDC (Contact), DC Input, DC Output, Surface Mount-Straight, ROHS COMPLIANT
PANASONIC

TXD2SL-2M-4.5V

 Power/Signal Relay, DPDT, Momentary, 0.056A (Coil), 4.5VDC (Coil), 250mW (Coil), 1A (Contact), 110VDC (Contact), DC Input, DC Output, Surface Mount-Straight, ROHS COMPLIANT
PANASONIC

TXD2SL-2M-4.5V-Z

 Power/Signal Relay, DPDT, Momentary, 0.056A (Coil), 4.5VDC (Coil), 250mW (Coil), 1A (Contact), 110VDC (Contact), DC Input, DC Output, Surface Mount-Straight, ROHS COMPLIANT
PANASONIC

TXD2SL-2M-5V

 Power/Signal Relay, DPDT, Momentary, 0.05A (Coil), 5VDC (Coil), 250mW (Coil), 1A (Contact), 110VDC (Contact), DC Input, DC Output, Surface Mount-Straight, ROHS COMPLIANT
PANASONIC

TXD2SL-2M-5V-X

 Power/Signal Relay, DPDT, Momentary, 0.05A (Coil), 5VDC (Coil), 250mW (Coil), 1A (Contact), 110VDC (Contact), DC Input, DC Output, Surface Mount-Straight
PANASONIC

TXD2SL-2M-5V-Z

 Power/Signal Relay, DPDT, Momentary, 0.05A (Coil), 5VDC (Coil), 250mW (Coil), 1A (Contact), 110VDC (Contact), DC Input, DC Output, Surface Mount-Straight, ROHS COMPLIANT
PANASONIC
©2020 ICPDF网 联系我们和版权申明