TXD2SL-5V-X [PANASONIC]
Power/Signal Relay, DPDT, Momentary, 0.04A (Coil), 5VDC (Coil), 200mW (Coil), 2A (Contact), 220VDC (Contact), DC Input, DC Output, Surface Mount-Straight;
| 型号： | TXD2SL-5V-X |
| 厂家： | 
PANASONIC |
| 描述： | Power/Signal Relay, DPDT, Momentary, 0.04A (Coil), 5VDC (Coil), 200mW (Coil), 2A (Contact), 220VDC (Contact), DC Input, DC Output, Surface Mount-Straight 光电二极管 继电器 |
| 文件： | 总7页 (文件大小：112K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
TESTING
HIGH INSULATION RELAYS
(Conforming to the supplementary
insulation class of EN Standards
(EN41003))
TX-D
RELAYS
Satisfies the following conditions:
• Surface-mount type also available.
• M.B.B. type also available
• The use of gold-clad twin crossbar
contacts ensures high contact reliabil-
ity.
• Outstanding vibration and shock re-
sistance.
Functional shock resistance:
750 m/s2 {75G}
7.4
.291
15
.591
• Clearances: 2.0 mm .079 inch or more
• Creepage distance: 2.5 mm .098 inch or
more
8.2
.323
7.4
.291
15
.591
8.4
.333
• 2,000 V breakdown voltage between
contact and coil.
The body block construction of the coil
that is molded by plastic offers a high
breakdown voltage of 2,000 V between
contact and coil, and 1,000 V between
open contacts.
mm inch
Destructive shock resistance:
1,000 m/s2 {100G}
FEATURES
• Approved to the supplementary insu-
lation class in the EN standards
(EN41003).
The insulation distance between the con-
tact and coil meet the supplementary in-
sulation class of the EN41003 standards
as required for equipment connected to
the telephone lines in Europe.
• Outstanding surge resistance.
Surge withstand between open contacts:
1,500 V 10×160 µsec. (FCC part 68)
Surge withstand between contact and
coil: 2,500 V 2×10 µsec. (Bellcore)
• High sensitivity 200 mW.
Functional vibration resistance:
10 to 55 Hz (at double amplitude of 3.3
mm .130 inch)
Destructive vibration resistance:
10 to 55 Hz (at double amplitude of 5 mm
.197 inch)
• High contact capacity: 2 A 30 V DC
(Standard type)
• Sealed construction allows automatic
washing.
SPECIFICATIONS
Contact
Characteristics
Standard (B.B.M)
type
2 Form C
Standard (B.B.M) type
M.B.B.type
M.B.B.type
2 Form D
Initial insulation resistance*1
Between open
Min. 1,000 MΩ (at 500 V DC)
Arrangement
1,000 Vrms for 1 min.
500 Vrms for 1 min.
Initial contact resistance, max.
(By voltage drop 6 V DC 1 A)
contacts
Initial
100 mΩ
Gold-clad silver
break-
down
voltage*2
Between contact
and coil
2,000 Vrms for 1 min.
Contact material
Nominal switching
capacity (resistive load)
Between contact
sets
2 A 30 V DC
1 A 30 V DC
30 W
1,000 Vrms for 1 min.
1,500 V
Max. switching power
(resistive load)
Between con-
tacts, 10 ×160 µs
60 W
–
Initial
surge
voltage
[FCC Part 68]
Max. switching voltage
Max. switching current
220 V DC
2 A
110 V DC
1 A
Between contact
and coil, 2×10 µs
2,500 V [Bellcore]
Temperature rise (at 20°C)
Max. 50°C*3
Max. 50°C*4
Min. switching capacity ❇1
10 µA 10 mV DC
Rating
Max. 4 ms
(Approx. 2 ms)
[Max. 4 ms
200 mW
(1.5 to 12 V DC)
230 mW
250 mW
(1.5 to 12 V DC)
270 mW
Operate time [Set time]*5
(at 20°C)
Max. 4 ms
(Approx. 2 ms)
Single side
stable
Nominal oper-
ating power
1 coil
(Approx. 2 ms)]
(24 V DC)
(24 V DC)
Max. 4 ms
(Approx. 1 ms)
[Max. 4 ms
150 mW
(1.5 to 12 V DC)
170 mW
Release time [Reset time]*6
(at 20°C)
Max. 4 ms
(Approx. 1 ms)
—
latching
(Approx. 2 ms)]
(24 V DC)
M.B.B. time*12
—
Min. 10 µs
Mechanical (at 180 cpm)
108
107
Functional
Shock
Min. 750 m/s2 {75 G}*7 Min. 500 m/s2 {50 G}*8
Min. 1,000 m/s2 {100 G}
Expected
life (min.
105 (2 A 30 V DC
resistive),
5 ×105 (1 A 30 V
DC resistive)
Destructive*9
Functional*10
Destructive
resistance
105 (1 A 30 V DC
resistive)
Electrical (at 20 cpm)
operations)
10 to 55 Hz at double amplitude of 3.3 mm
10 to 55 Hz at double amplitude of 5 mm
Vibration
resistance
Notes:
Conditions for opera- Ambient
–40°C to +85°C –40°F to +185°F
❇1This value can change due to the switching frequency, environmental conditions,
and desired reliability level, therefore it is recommended to check this with the ac-
tual load.
tion, transport and
storage*11 (Not freez-
ing and condensing
at low temperature)
temp. ❇2
Humidity
5 to 85%R.H.
❇2The upper limit for the ambient temperature is the maximum temperature that
can satisfy the coil temperature rise. Under the packing condition, allowable tem-
perature range is from –40 to +70°C –40°C to +158°F.
Unit weight
Approx. 2 g .071 oz.
Remarks
12
*
*
*
*
*
*
*
*
*
*
*
*
Specifications will vary with foreign standards certification ratings.
Measurement at same location as "Initial breakdown voltage" section.
Detection current: 10 mA
By resistive method; nominal voltage applied to the coil; contact carrying current: 2 A.
By resistive method; nominal voltage applied to the coil; contact carrying current: 1 A.
Nominal voltage applied to the coil, excluding contact bounce time.
Nominal voltage applied to the coil, excluding contact bounce time without diode.
Half-wave pulse of sine wave: 6 ms.; detection time: 10 µs.
Half-wave pulse of sine wave: 11 ms.; detection time: 10 µs.
Half-wave pulse of sine wave: 6 ms.
*
M.B.B. time:
1
Min. 10 µs
2
3
×
Measuring
condition
4
5
6
7
8
500 Ω
5 V DC
9
10
11
Detection time: 10 µs.
Refer to 4.Conditions for operation, transport and storage mentioned in Cautions
for use (Page 178).
160
TX-D
TYPICAL APPLICATIONS
• Facsimiles
• Modems
• Communication devices
ORDERING INFORMATION
1) Standard (B.B.M.)type
Ex. TXD
2
SA
–
L
–
–
4.5V
–
Z
Contact
arrangement
Coil voltage
(DC)
Surface-mount availability
Operating function
Terminal shape
Nil: Standard PC
Packing style
2: 2 Form C Nil: Standard PC board terminal or
self-clinching terminal
Nil: Single side
stable
1.5, 3, 4.5, 5, Nil: Tube packing
board terminal 6, 9, 12, 24 V Z: Tape and reel packing
SA:Standard surface-mount terminal
SL: High connection reliability surface-mount
terminal type
L: 1 coil latching
or surface-
mount type
H: Self-clinching
terminal
(Picked from the 8/9/
10/12-pin side)
SS:Space saving surface-mount terminal type
2) M.B.B.type
Ex. TXD
2
SA
–
2M
–
–
4.5V
–
Z
Contact
arrangement
Coil voltage
(DC)
Surface-mount availability
Operating function
Terminal shape
Packing style
2: 2 Form D Nil: Standard PC board terminal or
self-clinching terminal
2M: 2 M.B.B. type Nil: Standard PC
1.5, 3, 4.5, 5, Nil: Tube packing
board terminal 6, 9, 12, 24 V Z: Tape and reel packing
SA:Standard surface-mount terminal
SL: High connection reliability surface-mount
terminal type
or surface-
mount type
H: Self- clinching
terminal
(Picked from the 8/9/
10/12-pin side)
SS:Space saving surface-mount terminal type
Notes: 1. Tape and reel (picked from 1/3/4/5-pin side) is also available by request. Part number. suffix “-X” is needed when ordering.
(ex.) TXD2SA-3V-X
2. Tape and reel packing symbol “-Z” or “-X” are not marked on the relay.
Surface-mount terminal variation
Usable conditions based on terminal connection solder reliability
Variation
Terminal style
Normal environments (indoor)
Drastic temperature fluctuations (outdoor)
0.25
.010
8.4
.331
SA type
Recommended
—
5.08
.200
(Standard surface-mount terminal type)
9.4±0.5
.370±.020
0.25
.010
Max.
10.0
.394
SL type
(Highly connection reliability surface-
mount terminal type)
Recommended
Recommended
Recommended
Recommended
5.08
.200
9.4±0.5
.370±.020
0.25
.010
Max.
10.0
.394
SS type
(Space saving surface-mount terminal
type)
5.08
.200
7.4±0.5
.291±.020
OPERATION INFORMATION
Contact Operation
Open
During Operation
N.C. COM N.O.
N.C. COM N.O.
Operation Complete
N.C. COM N.O.
N.C. COM N.O.
During Reset
Reset Complete
N.C. COM N.O.
N.C. COM N.O.
M.B.B. contact
operation
N.C. COM N.O.
N.C. COM N.O.
Standard
(B.B.M.) contact
operation
N.C. COM N.O.
N.C. COM N.O.
161
TX-D
TYPES AND COIL DATA (at 20°C 68°F)
1. Standard (B.B.M.) type
(1) Standard PC board terminal and self-clinching terminal
1. Single side stable
Part No. V DC
Pick-up
voltage,
V DC (max.) V DC (min.)
Drop-out
voltage,
Nominal
operating
current,
Nominal
operating
power,
mW
Max.
allowable
voltage,
V DC
Coil
Rating,
V DC
Coil
resistance,
Ω (±10%)
Standard PC board
terminal
Self-clinching
terminal
(initial)
1.13
2.25
3.38
3.75
4.5
(initial)
0.15
0.3
mA (±10%)
1.5
3
TXD2-1.5V
TXD2-H-1.5V
132.7
66.7
44.4
40.0
33.3
22.2
16.7
9.6
11
45
200
200
200
200
200
200
200
230
1.8
3.6
5.4
6
TXD2-3V
TXD2-4.5V
TXD2-5V
TXD2-6V
TXD2-9V
TXD2-12V
TXD2-24V
TXD2-H-3V
TXD2-H-4.5V
TXD2-H-5V
TXD2-H-6V
TXD2-H-9V
TXD2-H-12V
TXD2-H-24V
4.5
5
0.45
0.5
101
125
180
405
720
2,504
6
0.6
7.2
10.8
14.4
28.8
9
6.75
9
0.9
12
24
1.2
18
2.4
2. 1 coil latching
Part No.
Reset
voltage,
V DC (max.)
(initial)
Nominal
operating
current,
Nominal
operating
power,
mW
Max.
allowable
voltage,
V DC
Coil
Rating,
V DC
Set voltage,
V DC (max.)
(initial)
Coil
resistance,
Ω (±10%)
Standard PC board
terminal
Self-clinching
terminal
mA (±10%)
1.5
3
TXD2-L-1.5V
TXD2-L-3V
TXD2-L-4.5V
TXD2-L-5V
TXD2-L-6V
TXD2-L-9V
TXD2-L-12V
TXD2-L-24V
TXD2-L-H-1.5V
TXD2-L-H-3V
TXD2-L-H-4.5V
TXD2-L-H-5V
TXD2-L-H-6V
TXD2-L-H-9V
TXD2-L-H-12V
TXD2-L-H-24V
1.13
2.25
3.38
3.75
4.5
1.13
2.25
3.38
3.75
4.5
100.0
50.0
33.3
30.0
25.0
16.7
12.5
7.1
15
60
150
150
150
150
150
150
150
170
1.8
3.6
5.4
6
4.5
5
135
166
240
540
960
3,388
6
7.2
10.8
14.4
28.8
9
6.75
9
6.75
9
12
24
18
18
Standard packing: 40 pcs. in an inner package (tube); 1,000 pcs. in an outer package.
Note: In case of 5 V transistor drive circuit, it is recommended to use 4.5 V type relay.
(2) Surface-mount terminal
1. Single side stable
Part No.
Pick-up
voltage,
V DC (max.) V DC (min.)
Drop-out
voltage,
Nominal
operating
current,
Nominal
operating
power,
mW
Max.
allowable
voltage,
V DC
Coil
Rating,
V DC
Coil
resistance,
Ω (±10%)
Tape and reel
packing
Tube packing
(initial)
1.13
2.25
3.38
3.75
4.5
(initial)
0.15
0.3
mA (±10%)
1.5
3
TXD2S❍-1.5V
TXD2S❍-3V
TXD2S❍-4.5V
TXD2S❍-5V
TXD2S❍-6V
TXD2S❍-9V
TXD2S❍-12V
TXD2S❍-24V
TXD2S❍-1.5V-Z
TXD2S❍-3V-Z
TXD2S❍-4.5V-Z
TXD2S❍-5V-Z
TXD2S❍-6V-Z
TXD2S❍-9V-Z
TXD2S❍-12V-Z
TXD2S❍-24V-Z
132.7
66.7
44.4
40.0
33.3
22.2
16.7
9.6
11
45
200
200
200
200
200
200
200
230
1.8
3.6
5.4
6
4.5
5
0.45
0.5
101
125
180
405
720
2,504
6
0.6
7.2
10.8
14.4
28.8
9
6.75
9
0.9
12
24
1.2
18
2.4
2. 1 coil latching
Part No.
Reset
voltage,
V DC (max.)
(initial)
Nominal
operating
current,
Nominal
operating
power,
mW
Max.
allowable
voltage,
V DC
Coil
Rating,
V DC
Set voltage,
V DC (max.)
(initial)
Coil
resistance,
Ω (±10%)
Tape and reel
packing
Tube packing
mA (±10%)
1.5
3
TXD2S❍-L-1.5V
TXD2S❍-L-3V
TXD2S❍-L-4.5V
TXD2S❍-L-5V
TXD2S❍-L-6V
TXD2S❍-L-9V
TXD2S❍-L-12V
TXD2S❍-L-24V
TXD2S❍-L-1.5V-Z
TXD2S❍-L-3V-Z
TXD2S❍-L-4.5V-Z
TXD2S❍-L-5V-Z
TXD2S❍-L-6V-Z
TXD2S❍-L-9V-Z
TXD2S❍-L-12V-Z
TXD2S❍-L-24V-Z
1.13
2.25
3.38
3.75
4.5
1.13
2.25
3.38
3.75
4.5
100.0
50.0
33.3
30.0
25.0
16.7
12.5
7.1
15
60
150
150
150
150
150
150
150
170
1.8
3.6
4.5
5
135
166
240
540
960
3,388
5.4
6
6
7.2
9
6.75
9
6.75
9
10.8
14.4
28.8
12
24
18
18
❍: For each surface-mounted terminal variation, input the following letter.
SA type: A , SL type: L , SS type: S
Standard packing:40 pcs. (tube), 500 pcs. (tape and reel) in an inner package; 1,000 pcs. in an outer package
Notes:
1. Tape and reel packing symbol "-Z" is not marked on the relay. "X" type tape and reel packing (picked from 1/3/4/5-pin side) is also available.
2. In case of 5 V transistor drive circuit, it is recommended to use 4.5 V type relay.
162
TX-D
2. M.B.B.Type
(1) Standard PC board terminal and self-clinching terminal
Single side stable
Part No.
Nominal
operating
current,
Nominal
operating
power,
mW
Max.
allowable
voltage,
V DC
Coil
Rating,
V DC
Pick-up
voltage,
V DC (max.) V DC (min.)
Drop-out
voltage,
Coil
resistance,
Ω (±10%)
Standard PC board
terminal
Self-clinching
terminal
mA (±10%)
1.5
3
TXD2-2M-1.5V
TXD2-2M-3V
TXD2-2M-4.5V
TXD2-2M-5V
TXD2-2M-6V
TXD2-2M-9V
TXD2-2M-12V
TXD2-2M-24V
TXD2-2M-H-1.5V
TXD2-2M-H-3V
TXD2-2M-H-4.5V
TXD2-2M-H-5V
TXD2-2M-H-6V
TXD2-2M-H-9V
TXD2-2M-H-12V
TXD2-2M-H-24V
1.13
2.25
3.38
3.75
4.5
0.15
0.3
0.45
0.5
0.6
0.9
1.2
2.4
166.7
83.3
55.6
50.0
41.7
27.8
20.8
11.3
9
36
250
250
250
250
250
250
250
270
1.8
3.6
5.4
6
4.5
5
81
100
144
324
576
2,133
6
7.2
10.8
14.4
28.8
9
6.75
9
12
24
18
Standard packing: 40 pcs. in an inner package (tube); 1,000 pcs. in an outer package
(2) Surface-mount terminal
Single side stable
Part No.
Nominal
operating
current,
Nominal
operating
power,
mW
Max.
allowable
voltage,
V DC
Coil
Rating,
V DC
Reset
voltage,
V DC (min.)
Coil
resistance,
Ω (±10%)
Set voltage,
V DC (max.)
Tape and reel
packing
Tube packing
mA (±10%)
1.5
3
TXD2S❍-2M-1.5V
TXD2S❍-2M-3V
TXD2S❍-2M-4.5V
TXD2S❍-2M-5V
TXD2S❍-2M-6
TXD2S❍-2M-1.5V-Z
TXD2S❍-2M-3V-Z
TXD2S❍-2M-4.5V-Z
TXD2S❍-2M-5V-Z
TXD2S❍-2M-6V-Z
TXD2S❍-2M-9V-Z
TXD2S❍-2M-12V-Z
TXD2S❍-2M-24V-Z
1.13
2.25
3.38
3.75
4.5
0.15
0.3
0.45
0.5
0.6
0.9
1.2
2.4
166.7
83.3
55.6
50.0
41.7
27.8
20.8
11.3
9
36
250
250
250
250
250
250
250
270
1.8
3.6
5.4
6
4.5
5
81
100
144
324
576
2,133
6
7.2
10.8
14.4
28.8
9
TXD2S❍-2M-9
6.75
9
12
24
TXD2S❍-2M-12
TXD2S❍-2M-24
18
❍: For each surface-mounted terminal variation, input the following letter.
SA type: A , SL type: L , SS type: S
Standard packing: 40 pcs. (tube), 500 pcs. (tape and reel) in an inner package; 1,000 pcs. in an outer package
Notes:
1. Tape and reel packing symbol "-Z" is not marked on the relay. "X" type tape and reel packing (picked from 1/3/4/5-pin side) is also available.
2. In case of 5 V transistor drive circuit, it is recommended to use 4.5 V type relay.
mm inch
DIMENSIONS
1. Standard PC board terminal and self-clinching terminal
PC board pattern
(Copper side view)
Schematic (Bottom view)
Standard PC board terminal
Single side stable
1 coil latching
(Deenergized condition)
(Reset condition)
15
.591
10.16
1
3
4
5
1
3
4 5
7.4
.400
2.54
.291
+
–
–
+
.100
0.65
8.2
.026
.323
5.08
.200
3.5
12
10
9
8
12
10 9 8
.138
0.5
8-1.0 dia
0.25
.010
.020
Direction indication*
Direction indication*
8-.039 dia
5.08
.200
1.15
5.08
.200
2.54
.100
.045
*Orientation stride located on top of relay.
Tolerance: ±0.1 ±.004
15
.591
7.4
Self clinching terminal
.291
0.65
8.2
.026
.323
3.5
.138
0.5
0.25
.010
.020
5.08
.200
1.15
5.08
.200
2.54
.100
.045
General tolerance: ±0.3 ±.012
163
TX-D
2. Surface-mount terminal
mm inch
SA type
Suggested mounting pad
(Top view)
Schematic (Top view)
Single side stable
1 coil latching
(Deenergized condition)
(Reset condition)
5.08
.200
2.54
.100
1
.039
15
.591
12
10
9
8
12
10
9
8
7.4
+
–
–
+
.291
1.6
.0.63
3.16
.124
8.2
8.4
7.24
.323
.331
.285
1
3
4
5
1
3
4
5
5.08
.200
9.4±0.5
.370±.020
0.5
Direction indication
Direction indication
0.65
.026
.020
0.3
0.25
.010
2.54
.100
5.08
.200
.012
For glue-pad
15
.591
15
.591
7.4
SL type
SS type
5.08
.200
.291
2.54
1
.100
.039
8.2
Max.
10.0
.390
.323
3.16
.124
0.5
7.24
.285
5.08
.200
9.4±0.5
.370±.020
0.65
.026
.020
0.25
.010
2.54
.100
5.08
.200
15
.591
7.4
5.08
.200
.291
2.54
.100
1
.039
8.2
Max.
10.0
.390
.323
2.16
.085
0.5
6.24
.246
5.08
.200
7.4±0.5
0.65
.026
.020
0.25
.010
2.54
.100
5.08
.200
.291±.020
General tolerance: ±0.3 ±.012
Tolerance: ±0.1 ±.004
REFERENCE DATA
1. Maximum switching capacity
2. Life curve
3. Mechanical life
Tested sample: TXD2-5V, 10 pcs.
Operating frequency: 180 cpm
100
90
3.0
2.0
100
Pick-up voltage
Drop-out voltage
80
70
60
50
40
30
20
10
0
Max.
Min.
DC resistive load
1.0
50
30
20
30V DC
0.5
0.4
resistive load
Max.
Min.
0.3
10
0
0.2
0
10
100
1000
10000
0
20 30 50
100
200 300
1.0
2.0
No. of operations, ×104
Contact voltage, V
Switching current, A
4. Electrical life (2 A 30 V DC resistive load)
5-(1). Coil temperature rise
Tested sample: TXD2-5V, 6 pcs.
Operating frequency: 20 cpm
Tested sample: TXD2-5V, 6 pcs.
Measured portion: Inside the coil
Ambient temperature: 25°C 77°F, 70°C 158°F
Change of pick-up and drop-out voltage
Change of contact resistance
100
90
70
100
90
80
70
60
50
40
30
20
10
0
25°C +77°F
+
+
70°C +158°F
60
50
40
30
20
10
0
Pick-up voltage
Drop-out voltage
80
70
60
50
40
30
20
10
0
Max.
Min.
Max.
Min.
2A
2A
Max.
Min.
0A
0A
0
2
4
6
8
10
0
2
4
6
8
10
100
110
120
No. of operations, ×104
No. of operations, ×104
Coil applied voltage, %V
164
TX-D
5-(2). Coil temperature rise
Tested sample: TXD2-24V, 6 pcs.
Measured portion: Inside the coil
Ambient temperature: 25°C 77°F, 70°C 158°F
6-(1). Operate/release time characteristics
(with diode)
Tested sample: TXD2-5V, 10 pcs.
6-(2). Operate/release time characteristics
(without diode)
Tested sample: TXD2-5V, 10 pcs.
70
5
5
25°C +77°F
70°C +158°F
+
+
Operate time
Release time
Operate time
Release time
60
50
40
30
20
10
0
4
4
Max.
Max.
Min.
3
Min.
3
2A
2A
Max.
2
2
0A
0A
Min.
Max.
Min.
1
1
0
0
100
110
120
70
80
90
100 110 120
70
80
90
100 110 120
Coil applied voltage, %V
Coil applied voltage, %V
Coil applied voltage, %V
7. Distribution of pick-up and drop-out voltage
Tested sample: TXD2-5V, 50 pcs.
8. Distribution of set and reset voltage
Tested sample: TXD2-L-12V, 30 pcs.
9. Ambient temperature characteristics
Tested sample: TXD2-5V, 5 pcs.
Set voltage
Reset voltage
40
35
Pick-up voltage
x
30
15
10
5
20
Drop-out voltage
25
Drop-out voltage
x
Pick-up voltage
20
15
10
5
–40 –20
0
20 40 60 80
Ambient temperature, °C
–20
–40
0
10 20 30 40 50 60 70 80 90 100
Ratio against the rated voltage, %V
0
10 20 30 40 50 60 70 80 90 100
Ratio against the rated voltage, %V
10. Distribution of contact resistance
11-(1). High-frequency characteristics
11-(2). High-frequency characteristics
Tested sample: TXD2-5V, 30 pcs. (30 × 4 contacts)
Isolation characteristics
Insertion loss characteristics
Tested sample: TXD2-12V, 2 pcs.
Tested sample: TXD2-12V, 2 pcs.
35
Terminal
Nos. 4-5, 8-9
Terminal
Nos. 3-4, 9-10
30
25
20
15
10
5
100
50
1.0
0.8
0.6
0.4
0.2
0
10
100
1,000
0
20
30
40
50
0
10
100
1,000
Frequency, MHz
Contact resistance, mΩ
Frequency, MHz
12-(1). Malfunctional shock (single side stable)
Tested sample: TXD2-5V, 6 pcs
12-(2). Malfunctional shock (latching)
Tested sample: TXD2-L-12V, 6 pcs.
Reset state
Deenergized
X
Z
X
Z
X'
1000m/s
X'
1000m/s
Y
Y
Z'
Y
Y'
condition
Z'
Y
Y'
2
2
Set state
Energized condition
X
Z
X
Z
2
2
2
2
1000m/s
1000m/s
1000m/s
1000m/s
2
2
2
2
1000m/s
Z'
1000m/s
X'
1000m/s
Z'
1000m/s
X'
2
2
1000m/s
Y'
1000m/s
Y'
165
TX-D
13-(1). Influence of adjacent mounting
Tested sample: TXD2-12V, 6 pcs.
13-(2). Influence of adjacent mounting
Tested sample: TXD2-12V, 6 pcs.
13-(3). Influence of adjacent mounting
Tested sample: TXD2-12V, 6 pcs.
ON
5
0
5
5
0
ON ON
Pick-up voltage
ON
ON
ON
Pick-up voltage
0
Pick-up voltage
ON
–5
–5
–5
ON
ON
ON
OFF
OFF OFF
5
0
5
5
0
OFF
OFF
OFF
Drop-out voltage
Drop-out voltage
0
Drop-out voltage
OFF
–5
OFF
–5
–5
OFF
OFF
0
2
4
6
8
10
.079.157.236.315.394
Inter-relay distance , mm inch
0
2
4
6
8
10
.079.157.236.315.394
Inter-relay distance , mm inch
0
2
4
6
8
10
.079.157.236.315.394
Inter-relay distance , mm inch
14.Actual load test (35 mA 48V DC wire spring
relay load)
Tested sample: TXD2-5V, 6 pcs.
Change of pick-up and drop-out voltage
Change of contact resistance
100
90
100
90
80
70
60
50
40
30
20
10
0
80
Circuit
Pick-up voltage
Max.
Min.
70
60
50
458 Ω
+
0.08
µF
0.08
µF
4
3
48 V DC
Drop-out voltage
40
TXD
Max
Min.
30
20
10
0
Max.
Min.
–
458 Ω
Wire spring relay
0
10
20
30
40
50
0
10
20
30
40
50
No. of operation, ×104
No. of operation, ×104
15-(1). Distribution of M.B.B. time
Tested sample: TXD2-2M-5V, 50 pcs.
Terminal No. 3-4-5: ON
Terminal No. 3-4-5: OFF
60
60
x:
300.5 µs
x:
298.8 µs
σn-1: 55.3 µs
Min.: 165 µs
Max.: 415 µs
σn-1: 51.8 µs
Min.: 205 µs
Max.: 432 µs
50
40
30
20
10
0
50
40
30
20
22
16
13
12
12
10
8
7
6
2
1
1
0
100 150 200 250 300 350 400 µs min.
150 200 250 300 350 400 450 µs max.
100 150 200 250 300 350 400 µs min.
150 200 250 300 350 400 450 µs max.
15-(2). Distribution of M.B.B. time
Tested sample: TXD2-2M-5V, 50 pcs.
Terminal No. 8-9-10: ON
Terminal No. 8-9-10: OFF
60
60
50
40
30
20
10
0
x:
293.4 µs
x:
281.4 µs
σn-1: 60.4 µs
Min.: 155 µs
Max.: 445 µs
σn-1: 50.8 µs
Min.: 420 µs
Max.: 421 µs
50
40
30
20
10
0
19
18
15
10
10
6
5
4
4
4
3
1
1
100 150 200 250 300 350 400 µs min.
150 200 250 300 350 400 450 µs max.
100 150 200 250 300 350 400 µs min.
150 200 250 300 350 400 450 µs max.
For Cautions for Use, see Page 178 and 179.
9/1/2000
All Rights Reserved, © Copyright Matsushita Electric Works, Ltd.
Go To Online Catalog
相关型号：
TXD2SL-5V-Z
Power/Signal Relay, DPDT, Momentary, 0.056A (Coil), 5VDC (Coil), 280mW (Coil), 2A (Contact), 220VDC (Contact), DC Input, DC Output, Surface Mount-Straight, ROHS COMPLIANT
PANASONIC
TXD2SL-6V-1-Z
Power/Signal Relay, DPDT, Momentary, 0.047A (Coil), 6VDC (Coil), 280mW (Coil), 1A (Contact), 220VDC (Contact), DC Input, DC Output, Surface Mount-Straight, ROHS COMPLIANT
PANASONIC
TXD2SL-6V-3
Power/Signal Relay, DPDT, Momentary, 0.047A (Coil), 6VDC (Coil), 280mW (Coil), 2A (Contact), 220VDC (Contact), DC Input, DC Output, Surface Mount-Straight, ROHS COMPLIANT
PANASONIC
TXD2SL-6V-6
Power/Signal Relay, DPDT, Momentary, 0.047A (Coil), 6VDC (Coil), 280mW (Coil), 2A (Contact), 220VDC (Contact), DC Input, DC Output, Surface Mount-Straight, ROHS COMPLIANT
PANASONIC
TXD2SL-6V-7
Power/Signal Relay, DPDT, Momentary, 0.047A (Coil), 6VDC (Coil), 280mW (Coil), 1A (Contact), 220VDC (Contact), DC Input, DC Output, Surface Mount-Straight, ROHS COMPLIANT
PANASONIC
TXD2SL-6V-X
Power/Signal Relay, DPDT, Momentary, 0.033A (Coil), 6VDC (Coil), 200mW (Coil), 2A (Contact), 220VDC (Contact), DC Input, DC Output, Surface Mount-Straight
PANASONIC
TXD2SL-9V-3
Power/Signal Relay, DPDT, Momentary, 0.031A (Coil), 9VDC (Coil), 280mW (Coil), 2A (Contact), 220VDC (Contact), DC Input, DC Output, Surface Mount-Straight, ROHS COMPLIANT
PANASONIC
TXD2SL-9V-4
Power/Signal Relay, DPDT, Momentary, 0.031A (Coil), 9VDC (Coil), 280mW (Coil), 1A (Contact), 220VDC (Contact), DC Input, DC Output, Surface Mount-Straight, ROHS COMPLIANT
PANASONIC
TXD2SL-9V-7-Z
Power/Signal Relay, DPDT, Momentary, 0.031A (Coil), 9VDC (Coil), 280mW (Coil), 1A (Contact), 220VDC (Contact), DC Input, DC Output, Surface Mount-Straight, ROHS COMPLIANT
PANASONIC
TXD2SL-9V-X
Power/Signal Relay, DPDT, Momentary, 0.022A (Coil), 9VDC (Coil), 200mW (Coil), 2A (Contact), 220VDC (Contact), DC Input, DC Output, Surface Mount-Straight
PANASONIC
TXD2SL-9V-Z
Power/Signal Relay, DPDT, Momentary, 0.031A (Coil), 9VDC (Coil), 280mW (Coil), 2A (Contact), 220VDC (Contact), DC Input, DC Output, Surface Mount-Straight, ROHS COMPLIANT
PANASONIC
TXD2SL-L-1.5V
Power/Signal Relay, DPDT, Latched, 0.153A (Coil), 1.5VDC (Coil), 230mW (Coil), 2A (Contact), 220VDC (Contact), DC Input, DC Output, Surface Mount-Straight, ROHS COMPLIANT
PANASONIC
©2020 ICPDF网 联系我们和版权申明