TSP090SC [PANJIT]
SURFACE MOUNT BI-DIRECTIONAL THYRISTOR SURGE PROTECTOR DEVICE; 表面安装双向晶闸管浪涌保护器件
| 型号： | TSP090SC |
| 厂家： | 
PAN JIT INTERNATIONAL INC. |
| 描述： | SURFACE MOUNT BI-DIRECTIONAL THYRISTOR SURGE PROTECTOR DEVICE |
| 文件： | 总7页 (文件大小：111K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
TSP058SC - TSP320SC
SURFACE MOUNT BI-DIRECTIONAL THYRISTOR SURGE PROTECTOR DEVICE
FEATURES
• Protects by limiting voltages and shunting surge currents away from sensitive circuits
• Designed for telecommunications applications such as line cards, modems, PBX, FAX,
LAN,VHDSL
• Helps meet standards such as GR1089, ITU K.20, IEC950, UL1459&50, FCC part 68
• Low capacitance, High surge (A, B, C rating available), precise voltage limiting, Long life
SMB/DO-214AA
SUMMARY ELECTRICAL CHARACTERISTICS
Rated Repetitive
PeakOff-State
Voltage
Repetitive
PeakOff-State
Current
Breakover On-State
Breakover Holding
Current Currnet (f = 1 MHz, Vac = 15 mVRMS)
Off-State Capacitance
Voltage
Voltage
Part Number
Max.
VDRM
V
Max.
Max.
Max.
I DRM
µA
5
Max.
I BO
Min.
I H
Typ.
Max. Typ.
Max.
CO @ 50 Vdc
pF
VBO @ IBO
VT @ 1A
CO @ 0 Vdc
pF
V
V
5
mA
mA
150
TSP058SC
TSP065SC
TSP075SC
TSP090SC
TSP120SC
TSP140SC
TSP160SC
TSP190SC
TSP220SC
TSP275SC
TSP320SC
Notes
58
77
800
85
80
78
70
63
61
58
57
57
56
56
(3)
105
101
95
80
79
78
75
71
71
70
70
(3)
35
34
30
23
20
19
19
19
18
18
17
(3)
43
40
37
34
29
28
27
26
26
25
24
(3)
65
75
88
98
5
5
800
800
800
800
800
800
800
800
800
800
(3)
150
150
150
150
150
150
150
150
150
150
(2,3)
5
5
90
130
160
180
220
260
300
350
400
(3,5,6)
5
5
120
140
160
190
220
275
320
(1,3)
5
5
5
5
5
5
5
5
5
5
5
5
5
5
(3)
(3)
NOTES:
1. Specific VDRM values are available by request.
2. Specific IH values are available by request.
3. All ratings and characteristics are at 25 °C unless otherwise specified.
4. VDRM applies for the life of the device. IDRM will be in spec during and following operation of the device.
5. VBO1 is at 100V/msec, ISC =10Apk, VOC=1KVpk, 10/1000 Waveform
6. VBO2 is at f = 60 Hz, ISC = 1 A(RMS), Vac = 1KV(RMS), RL = 1 KΩ, 1/2 AC cycle
PAGE 1
Ver: June 2001
TSP058SC - TSP320SC
SELECTION GUIDE
Follow these steps to select the proper Thyristor surge protector for your application:
1. Define the operating parameters for the circuit:
• Ambient operating temperature range
• Maximum telephone line operating current (highest battery and shortest copper loop)
• Maximum operating voltage: (Maximum DC bias + peak ringing voltage)
• Maximum surge current
• System voltage damage threshold
• Select device with an off-state voltage rating (VDRM) above the maximum operating voltage at the minimum operating temperature.
3. Select surge current ratings (IPPS and ITSM) ≥ those which the application must withstand.
4. Verify that the minimum holding current of the device at the maximum ambient temperature is above the maximum dc current of the
system.
5. Verify that the maximum breakover voltage of the device is below the system damage threshold.
6. Verify that the circuit's ambient operating temperatures are within the device's operating temperature range.
7. Verify that the device's dimensions fit the application's space considerations.
8. Independently evaluate and test the suitability and performance of the device in the application
MAXIMUM SURGE RATINGS (TJ = 25 ºC UNLESS OTHERWISE NOTED)
Non-Repetitive Peak
On-State Surge Current
Rating
Non-Repetitive Peak Pulse Current
Symbol
Short-Circuit Current Wave
Open-Circuit Voltage Wave
Value
I
PPS
I TSM
2/10 µs
2/10 µs
500 A
8/20 µs 10/160 µs 5/310 µs
10/560 µs 10/1000 µs
1.2/50 µs 10/160 µs 10/700 µs 10/560 µs 10/1000 µs
350 A 200 A 150 A 125 A 100 A
60A
Notes
(1,2,4,5,6)
(1,2,3,4)
Notes:
% Ipps
100%
1. Thermal accumulation between successive surge tests is
not allowed.
2. The device under test initially must be in thermal
equilibrium with TJ = 25 °C.
80%
60%
40%
20%
0%
3. Test at 1 cycle, 60 Hz.
4. Surge ratings are non-repetitive because instantaneous
junction temperatures may exceed the maximum rated TJ.
Nevertheless, devices will survive many surge applications
without degradation. Surge capability will not degrade over
a device's typical operating life.
5. Adjust the surge generator for optimum current-wave
accuracy when both voltage and current wave
specifications cannot be exactly met. The current wave is
more important than the voltage wave for accurate surge
evaluation.
To Ta
Tb
T1
Time
6. The waveform is defined as A/B ms where:
A: (Virtual front time) = 1.25 X Rise time = 1.25 X (Tb - Ta)
B (Duration time to 50% level of Ipps) = T1 - T0
PAGE 2
Ver: June 2001
TSP058SC - TSP320SC
MAXIMUM THERMAL RATINGS
Unit
Rating
Symbol
Value
Storage Junction Temperature Range
Operating Junction Temperature Range
Operating Ambient Temperature Range
TSTG
-50 to 150
-40 to 150
-40 to 65
OC
OC
OC
TJ
Ta
Notes:
PCB board mounted on minimum foot print.
THERMAL CHARACTERISTICS
Characteristic
Symbol
Value
Unit
OC / W
Thermal Resistance Junction to Leads T
L on tab adjacent to
RθJL
Max. 20
plastic. Both leads soldered to identical pad sizes.
Notes:
The junction to lead thermal resistance represents a minimum limiting value with both leads soldered to a large near-infinite heatsink. The
junction to ambient thermal resistance depends strongly on board mounting conditions and typically is 3 to 6 times higher than the junction
to lead resistance. The data shown is to be used as guideline values for preliminary engineering.
ELECTRICAL CHARACTERISTICS (TC = 25°C UNLESS OTHERWISE NOTED)
Parameters
Test Conditions
Symbol
Min.
Max.
5
Unit
Repetitive Peak
Off-State Current
VD = rated VDRM
f = 60 Hz, ISC = 1 Arms, Vac = 1 KVrms, R
10/1000µs waveform, ISC = 10A, VOC = 62 V, R
= 1 A, Tw = 300 µs, 1 pulse
I
DRM
µA
Breakover Current
Holding Current1
On-State Voltage
L
= 1 KΩ , 1/2 AC cycle
= 400 Ω
I BO
I H
800
mA
mA
V
L
150
I
T
VT
5
Notes:
Specific IH values are available by request.
PAGE 3
Ver: June 2001
TSP058SC - TSP320SC
+I
I
PPS
I
I
TSM
T
I
BO
I
I
H
BR
I
DRM
_
+V
V
V
DRM
V
T
VBO
V
BR
_
I
Characteristic
Symbol
Value
Maximum voltage across the device in or at breakdown measured
under a specified voltage and current rate of rise
V
BO
Breakover Voltage
Breakover Current
Holding Current
On-state current
On-state voltage
I
BO
Instantaneous current flowing at the breakover voltage (VBO)
I
H
T
Minimum current required to maintain the device in the on-state
I
Current through the device in the on-state condition
Voltage across the device in the on-state condition at a specified
current (IT)
V
T
The highest instantaneous value of the off-state voltage, including all
repetitive transient voltages but excluding all nonrepetitive transient
voltages
V
DRM
Rated Repetitive Peak Off-State Voltage
Repetitive Peak Off-State Current
Non-Repetitive Peak pulse current
The maximum (peak) value of current that results from the application
of VDRM
I
I
DRM
PPS
Rated maximum value of peak impulse current of specified amplitude
and waveshape that may be applied without damage to the device
under test
Rated value of the rate of rise of current that the device can withstand
without damage.
di/dt
dv/dt
Critical rate of rise of on-state current
Critical Rate of Rise of Off-State Voltage
The maximum rate of rise of voltage (belowVDRM) that will not cause
switching from the off-state to the on-state.
PAGE 4
Ver: June 2001
TSP058SC - TSP320SC
CAPACITANCE CHARACTERISTICS
F = 1 MHz, Vac = 15 mVrms
Off-State Capacitance
CO
pF
Part Number
0 Vdc
1 Vdc
2 Vdc
5 Vdc
50 Vdc
Max.
Typ.
85
80
78
70
63
61
58
57
57
56
56
Max.
105
101
95
Typ.
75
71
65
58
52
50
48
47
47
46
46
Max.
90
86
80
66
60
58
56
55
55
55
55
Typ.
69
65
59
52
47
45
43
42
42
42
41
Max.
83
79
73
57
58
56
53
49
49
49
49
Typ.
60
56
50
43
39
36
34
33
33
32
32
Max.
70
66
60
50
45
44
43
42
42
42
42
Typ.
35
34
30
23
20
19
19
19
18
18
17
TSP058SC
TSP065SC
TSP075SC
TSP090SC
TSP120SC
TSP140SC
TSP160SC
TSP190SC
TSP220SC
TSP275SC
TSP320SC
43
40
37
34
29
28
27
26
26
25
24
80
79
78
75
71
71
70
70
MECHANICAL DATA
• Case: JEDEC DO-214AA molded plastic
Unit: inch ( mm )
SMB / DO-214AA
• Terminals: Solder plated, solderable per MIL-STD-750,
Method 2026
• Polarity: Bi-directional Standard packaging: 12mm tape
(EIA-481)
• Weight: 0.003 ounce, 0.093 gram
.185 (4.70)
.160 (4.06)
.012 (.305)
.006 (.152)
.050 (1.27)
.030 (0.76)
.008(.203)
.002(.051)
.220 (5.59)
.200 (5.08)
PAGE 5
Ver: June 2001
TSP058SC - TSP320SC
DEVICE MARKING CODE
Part Number
TSP058SC
TSP065SC
TSP075SC
TSP090SC
TSP120SC
TSP140SC
TSP160SC
TSP190SC
TSP220SC
TSP275SC
TSP320SC
Marking Code
058C
065C
075C
090C
120C
140C
160C
1st Line:
PJ- PanJit logo
190C
Last digit of calendar year
Month
Y-
220C
PJ YM
058C
M-
275C
Marking code
2nd line:
320C
ORDER & PACKING INFORMATION
Device
Packing
Min. Order Q'ty
3,000 pcs
Order As
Remark
13" Tape & Reel
7" Tape & Reel
TSPxxxSC
Standard Packing
TSPxxxSC
500 pcs
TSPxxxSC-7
PAGE 6
Ver: June 2001
TSP058SC - TSP320SC
RATING AND CHARACTERISTIC CURVES
90
70
60
50
TSP075SC
TSP120SC
80
C series device
70
TSP140SC
60
40
30
20
10
B series device
TSP190SC
50
40
A series device
30
20
50
100
150
200
250
300
350
0.1
1
10
100
VDRM (V)
VD Off-state Voltage (V)
vd=15mVRMS AC
TJ= 25 O
C
TJ= 25 O
C
VD=0 Volts DC
vd=15mVRMS AC
f=1 MHZ
f=1 MHZ
TYPICAL CAPACITANCE V.S. OFF-STATE VOLTAGE
TYPICAL CAPACITANCE V.S. RATED REPETITIVE OFF-STATE VOLTAGE
100
TSP220SC
10
1
TSP220SB
0.1
0.01
0.001
TSP220SB
0.0001
0
20
40
60
80
TJ ( OC )
100
120
140 150
TYPICAL OFF-STATE CURRENT V.S JUNCTION TEMPERATURE
IMPORTANT NOTICE
This information is intended to unambiguously characterize the product in order to facilitate the customer's evaluation of the device in the
application. It will help the customer's technical experts determine that the device is compatible and interchangeable with similar devices
made by other vendors. The information in this data sheet is believed to be reliable and accurate. The specifications and information
herein are subject to change without notice. New products and improvements in products and their characterization are constantly in
process. This provides a superior performing and the highest value product. The factory should be consulted for the most recent informa-
tion and for any special characteristics not described or specified.
© Copyright PanjIt International Inc. 2001
All rights are reserved. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner.
The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may changed without notice. No liability will be
accepted by the publisher for any consequence of its use.
Publication thereof does not convey nor imply any license under patent- or other industrial or intellectual property rights.
PanJit Internatioal Inc.
http://www.panjit.com.tw email: sales@panjit.com.tw
PAGE 7
Ver: June 2001
相关型号：
©2020 ICPDF网 联系我们和版权申明