P3AU-0518ELF [PEAK]
Analog Circuit;
| 型号： | P3AU-0518ELF |
| 厂家： | 
PEAK ELECTRONICS GMBH |
| 描述： | Analog Circuit |
| 文件： | 总3页 (文件大小：141K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
P3AU-xxxxELF
Mainzer Straße 151–153
D-55299 Nackenheim
Tel. +49 6135 7026-0
Fax: +49 6135 931070
www.peak-electronics.de
peak@peak-electronics.de
PMA-SERIES
ꢀ 0.5 Watt
ꢀ Unregulated
ꢀ Single Output
ꢀ SIP4 Case
Rev.11-2008
The PMA series P3AU-xxxxELF is a family of cost effective 0.5 W single
output DC/DC converters. These converters are in an ultra miniature SIP4
case. Devices are encapsulated. High performance features: 1000VDC
input/output isolation, high efficiency operation, output voltage accuracy of
±3% maximum, input range of ±10% tolerance and low output ripple and
noise.
ꢀ 1 kV DC I/O Isolation
ꢀ Low Ripple and Noise
All specifications typical at Ta=25°C, nominal input voltage and full load unless otherwise specified
Input Specifications
Voltage Range
Input Filter
Input Reflected Ripple Current¹
10%
Capacitor
20 mA pk-pk
Output Specifications
Voltage Accuracy
Short Circuit Protection
Line Regulation
Load Regulation (20% - 100%)
Ripple and Noise (20Mhz bandwidth)
Temperature Coefficient
3%
Short Term
1.2% / 1% Vin Change
10% (3.3Vout Models: 20%)
100 mV pk-pk
0.02% / °C
General Specifications
Efficiency
See Table
I/O Isolation Voltage (3 sec.)
I/O Isolation Capacity
I/O Isolation Resistance
Switching Frequency
Humidity
1000 VDC
60 pF, typ.
1000 MOhm
80 kHz (Variable)
95% rel H
Reliability Calculated MTBF (MIL-HDBK-217F) > 1.121 Mhrs
Physical Specifications
Case Material
Potting Material
Weight
Non Conductive Black Plastic (UL94V-0 rated)
Epoxy (UL94V-0 rated)
~ 1.5g, typ.
Environment Specifications
Operating Temperature
Maximum Case Temperature
Storage Temperature
Cooling
-40 to +85°C (ambient)
100°C
-40 to +125°C
Free Air Convection
Soldering 260°C, max. (1.5mm from case 10s.)
RoHS Conform
PMA-Series – P3AU-xxxxELF – Single Output – SIP4 - Plastic Case
Specification can change without a notice – We accept no liability for any inaccuracy or printing errors.
Page 1/3
Selection Guide
Single Output
Order #
SINGLE OUTPUT
P3AU-053R3ELF
P3AU-0505ELF
P3AU-057R2ELF
P3AU-0509ELF
P3AU-0512ELF
P3AU-0515ELF
P3AU-0518ELF
P3AU-0524ELF
P3AU-123R3ELF
P3AU-1205ELF
P3AU-127R2ELF
P3AU-1209ELF
P3AU-1212ELF
P3AU-1215ELF
P3AU-1218ELF
P3AU-1224ELF
P3AU-243R3ELF
P3AU-2405ELF
P3AU-247R2ELF
P3AU-2409ELF
P3AU-2412ELF
P3AU-2415ELF
P3AU-2418ELF
P3AU-2424ELF
P3AU-483R3ELF
P3AU-4805ELF
P3AU-487R2ELF
P3AU-4809ELF
P3AU-4812ELF
P3AU-4815ELF
P3AU-4818ELF
P3AU-4824ELF
5
30
30
30
30
30
30
30
30
20
20
20
20
20
20
20
20
10
10
10
10
10
10
10
10
6
134
129
136
134
132
132
134
139
60
3.3
5
151.5
100
75
78
74
75
76
76
75
72
70
74
74
75
70
70
70
70
67
72
67
67
67
72
70
70
62
65
62
62
62
62
62
62
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
5
5
7.2
9
69.44
55.55
41.67
33.33
27.77
20.83
151.5
100
5
5
12
15
18
24
3.3
5
5
5
5
12
12
12
12
12
12
12
12
24
24
24
24
24
24
24
24
48
48
48
48
48
48
48
48
56
56
7.2
9
69.44
55.55
41.67
33.33
27.77
20.83
151.5
100
56
60
12
15
18
24
3.3
5
60
60
60
31
29
31
7.2
9
69.44
55.55
41.67
33.33
27.77
20.83
151.5
100
31
31
12
15
18
24
3.3
5
29
30
30
17
6
16
17
6
7.2
9
69.44
55.55
41.67
33.33
27.77
20.83
6
17
17
6
12
15
18
24
6
17
17
6
6
17
If you need other specifications, please enquire.
PMA-Series – P3AU-xxxxELF – Single Output – SIP4 - Plastic Case
Specification can change without a notice – We accept no liability for any inaccuracy or printing errors.
Page 2/3
Package / Pinning / Derating
0.50
(0.02)
1
2
3
4
All dimensions are typical in millimeters (inches).
- Pin diameter: 0.5 +/-0.05 (0.02 +/-0.002)
- Pin pitch tolerance: +/-0.35 (+/-0.014)
- Case tolerance +/-0.5 (+/-0.02)
Bottom View
0.50
(0.02)
Specification may change without notice.
* The thickness
of 48Vin voltage
is 7.50 (0.29)
11.68
(0.46)
6.00*
(0.24)*
PEAK
Modelcode
Datecode
1
2
3
4
2.54
(0.10)
0.50
(0.02)
SIP4 – PLASTIC CASE
PIN CONNECTIONS
#
1
2
3
4
SINGLE
- Vin
+Vin
- Vout
+Vout
App Notes:
¹ = Measured Input reflected ripple current with a simulated source inductance of 12uH.
² = Tested by minimal Vin and constant resistive load.
- Operation under no-load conditions will not damage these devices, but they will not observe the listed specifications.
- For reduce converter’s ripple & noise, it is recommended to add a 4.7µF~100µF capacitor in output end. For EMI performance
improvement, it is recommended to add a 12µH inductor and a 10µF~220µF capacitor in input end.
EMC SPECIFICATIONS
Radiated
Emissions
ESD
EN 55022
FCC 47CFR Part 15/B
IEC 61000-4-2
CLASS B
CLASS B
Perf. Criteria B
Perf. Criteria A
RS
IEC 61000-4-3
PMA-Series – P3AU-xxxxELF – Single Output – SIP4 - Plastic Case
Specification can change without a notice – We accept no liability for any inaccuracy or printing errors.
Page 3/3
相关型号：
©2020 ICPDF网 联系我们和版权申明