PE14TGI-240505Z2:1LF [PEAK]
Analog Circuit;型号: | PE14TGI-240505Z2:1LF |
厂家: | PEAK ELECTRONICS GMBH |
描述: | Analog Circuit |
文件: | 总4页 (文件大小:148K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
PE14TGI-xxxxZ2:1LF
Mainzer Straße 151–153
D-55299 Nackenheim
Tel. +49 6135 7026-0
Fax: +49 6135 931070
www.peak-electronics.de
peak@peak-electronics.de
PME01-SERIES
ꢀ 3 Watt
ꢀ 2:1 Wide Input
Rev.04-2009
ꢀ Regulated
TheꢀPME01ꢁSeriesꢀareꢀspeciallyꢀdesignedꢀforꢀapplicationsꢀwhereꢀaꢀwideꢀ
rangeꢀinputꢀvoltageꢀpowerꢀsuppliesꢀareꢀisolatedꢀfromꢀtheꢀinputꢀpowerꢀsupplyꢀ
inꢀaꢀdistributedꢀpowerꢀsupplyꢀsystemꢀonꢀaꢀꢀcircuitꢀboard.ꢀTheseꢀproductsꢀ
applyꢀto:ꢀꢀ
1)ꢀWhereꢀtheꢀvoltageꢀofꢀtheꢀinputꢀpowerꢀsupplyꢀisꢀ≤ꢀ2:1ꢀrange.ꢀꢀ
2)ꢀWhereꢀisolationꢀisꢀnecessaryꢀbetweenꢀ(IsolationꢀVoltageꢀ≤ꢀ1KV)ꢀ
3)ꢀWhereꢀtheꢀregulationꢀofꢀtheꢀoutputꢀvoltageꢀandꢀtheꢀoutputꢀrippleꢀnoiseꢀ
areꢀdemanded.ꢀ
ꢀ DIP24 Plastic Case
ꢀ 1.5 KV DC I/O Isolation
ꢀ Dual Separate Output
ꢀ Continuous Short Circuit Prot.
All specifications typical at Ta=25°C, nominal input voltage and full load unless otherwise specified
Input Specifications
Voltage Range
2:1 Wide Input
Output Specifications
Voltage Accuracy
Short Circuit Protection
Line Regulation
1%, typ (Main Out), 3%, typ (Vice Out)
Continuous (automatic recovery)
0.2%, typ.
Load Regulation (10% - 100% load)
Ripple (20Mhz bandwidth)
Noise (20Mhz bandwidth)
Temperature Coefficient
0.5%, typ.
20 mV pk-pk, typ.
75 mV pk-pk, typ.
0.03% / °C
General Specifications
Efficiency
See Table
I/O Isolation Voltage (3 sec.)
I/O Isolation Capacity
I/O Isolation Resistance
Switching Frequency (typical)
Humidity
1500 VDC
100 pF, typ.
1000 MOhm
300 kHz, typ.
95% rel H
Reliability Calculated MTBF (MIL-HDBK-217F) > 1 Mhrs
Physical Specifications
Case Material
Non Conductive Black Plastic (UL94V-0 rated)
Nickel Plated Steel* (optional – please add “M”LF)
Epoxy (UL94V-0 rated)
~ 15g, typ.
Potting Material
Weight
Environment Specifications
Operating Temperature
Maximum Case Temperature
Storage Temperature
Cooling
-40 to +85°C (ambient)
100°C
-55 to +125°C
Free Air Convection (10mm distance required)
Soldering 260°C, max. (1.5mm from case 10s.)
RoHS Conform
PME01-Series – PE14TGI-xxxxZ2:1LF –Dual Separate Output – DIP24 – Plastic/Metal Case
Specification can change without a notice – We accept no liability for any inaccuracy or printing errors.
Page 1/4
Selection Guide
Dual Separate Output
Order #
DUAL SEP. OUTPUT
PE14TGI-050505Z2:1LF
PE14TGI-050909Z2:1LF
PE14TGI-051212Z2:1LF
PE14TGI-051515Z2:1LF
PE14TGI-052424Z2:1LF
PE14TGI-120505Z2:1LF
PE14TGI-120909Z2:1LF
PE14TGI-121212Z2:1LF
PE14TGI-121515Z2:1LF
PE14TGI-122424Z2:1LF
PE14TGI-240505Z2:1LF
PE14TGI-240909Z2:1LF
PE14TGI-241212Z2:1LF
PE14TGI-241515Z2:1LF
PE14TGI-242424Z2:1LF
PE14TGI-480505Z2:1LF
PE14TGI-480909Z2:1LF
PE14TGI-481212Z2:1LF
PE14TGI-481515Z2:1LF
PE14TGI-482424Z2:1LF
4.5 - 9
4.5 - 9
4.5 - 9
4.5 - 9
4.5 - 9
9 - 18
9 - 18
9 - 18
9 - 18
9 - 18
18 - 36
18 - 36
5
9
30
16
12
10
6
300
166
125
100
62
68
70
72
73
72
74
76
80
79
81
76
78
82
80
82
76
78
80
79
82
12
15
24
5
30
16
12
10
6
300
166
125
100
62
9
12
15
24
5
30
16
12
10
6
300
166
125
100
62
9
18 - 36 12
18 - 36 15
18 - 36 24
36 - 72
36 - 72
5
9
30
16
12
10
6
300
166
125
100
62
36 - 72 12
36 - 72 15
36 - 72 24
If you need other specifications, please enquire.
* for optional metal case please add “M” before “LF”
(e.g. PE14TGI-240505Z2:1MLF for metal case)
Notes:
PME01-Series – PE14TGI-xxxxZ2:1LF –Dual Separate Output – DIP24 – Plastic/Metal Case
Specification can change without a notice – We accept no liability for any inaccuracy or printing errors.
Page 2/4
Package / Pinning / Derating
PIN CONNECTIONS
DUAL SEP.
- Vin
#
2
3
9
TEMPERATUREꢀDERATINGꢀGRAPH
- Vin
100%
75%
50%
25%
- Vout 2
10
11
14
15
16
22
23
N.C.
+Vout 2
+Vout 1
N.C.
- Vout 1
+Vin
71
85
ꢁ40 ꢁ20
0
20 40 60 80 100
AMBIENTꢀTEMPERATUREꢀ(°C)
+Vin
others Omitted
PME01-Series – PE14TGI-xxxxZ2:1LF –Dual Separate Output – DIP24 – Plastic/Metal Case
Specification can change without a notice – We accept no liability for any inaccuracy or printing errors.
Page 3/4
App Notes
Requirement on output load
In order to ensure the product operate efficiently and reliably, in addition to a max
load (namely full load), a minimum load is specified for this kind of DC/DC converter.
Make sure the specified range of input voltage is not exceeded, the minimum output
load no less than 10% load. If the actual load is less than the specified minimum
load, the output ripple may increase sharply while its efficiency and reliability will
reduce greatly. If the actual output power is very small, please add an appropriate
resistor as extra loading, or contact our company for other lower output power
products.
Recommended Circuit
PME01-Series have been tested according to the following recommended testing
circuit before leaving factory. This series should be tested under load (see Figure).
If you want to further decrease the input/output ripple, you can increase capacitance
properly or choose capacitors with low ESR. However, the capacitance should not be
too high, or may cause start-up problem. If you want to use the products in high EMI,
please choose our metal packaged products (PE14TGI-xxxxZ2:1MLF). For every
channel of output, provided the safe and reliable operation is ensured, the greatest
capacitance of its filter capacitor sees (see Table).
Output External
Capacitor Table
General: Cin
:
5V, 12V
24V, 48V 22/10ꢂF
100ꢂF
Vout(VDC) Cout(uF)
5
680
470
330
220
100
Cout:
10ꢂF / 100mA
9
12
15
24
Input current
While using unstable power source, please ensure the output voltage and ripple
voltage do not exceed indexes of the converter. The preceding power source must
be able to provide for converter sufficient starting current Ip (see figure)
General: Ip ≤1.4*Iin-max
PME01-Series – PE14TGI-xxxxZ2:1LF –Dual Separate Output – DIP24 – Plastic/Metal Case
Specification can change without a notice – We accept no liability for any inaccuracy or printing errors.
Page 4/4
相关型号:
©2020 ICPDF网 联系我们和版权申明