PI49FCT2805CTSE
更新时间:2024-09-18 17:52:17
品牌:PERICOM
描述:Low Skew Clock Driver, FCT Series, 5 True Output(s), 0 Inverted Output(s), CMOS, PDSO20, 0.300 INCH, SOIC-20
PI49FCT2805CTSE 概述
Low Skew Clock Driver, FCT Series, 5 True Output(s), 0 Inverted Output(s), CMOS, PDSO20, 0.300 INCH, SOIC-20 时钟驱动器
PI49FCT2805CTSE 规格参数
是否无铅: | 不含铅 | 是否Rohs认证: | 符合 |
生命周期: | Obsolete | 零件包装代码: | SOIC |
包装说明: | SOP, | 针数: | 20 |
Reach Compliance Code: | compliant | ECCN代码: | EAR99 |
HTS代码: | 8542.39.00.01 | 风险等级: | 5.67 |
系列: | FCT | 输入调节: | SCHMITT TRIGGER |
JESD-30 代码: | R-PDSO-G20 | JESD-609代码: | e3 |
长度: | 12.8 mm | 负载电容(CL): | 50 pF |
逻辑集成电路类型: | LOW SKEW CLOCK DRIVER | 湿度敏感等级: | 1 |
功能数量: | 2 | 反相输出次数: | |
端子数量: | 20 | 实输出次数: | 5 |
最高工作温度: | 85 °C | 最低工作温度: | -40 °C |
输出特性: | 3-STATE WITH SERIES RESISTOR | 封装主体材料: | PLASTIC/EPOXY |
封装代码: | SOP | 封装形状: | RECTANGULAR |
封装形式: | SMALL OUTLINE | 峰值回流温度(摄氏度): | 250 |
传播延迟(tpd): | 4.5 ns | 认证状态: | Not Qualified |
Same Edge Skew-Max(tskwd): | 0.5 ns | 座面最大高度: | 2.65 mm |
最大供电电压 (Vsup): | 5.25 V | 最小供电电压 (Vsup): | 4.75 V |
标称供电电压 (Vsup): | 5 V | 表面贴装: | YES |
技术: | CMOS | 温度等级: | INDUSTRIAL |
端子面层: | MATTE TIN | 端子形式: | GULL WING |
端子节距: | 1.27 mm | 端子位置: | DUAL |
处于峰值回流温度下的最长时间: | 40 | 宽度: | 7.5 mm |
Base Number Matches: | 1 |
PI49FCT2805CTSE 数据手册
通过下载PI49FCT2805CTSE数据手册来全面了解它。这个PDF文档包含了所有必要的细节,如产品概述、功能特性、引脚定义、引脚排列图等信息。
PDF下载PI49FCT805T
PI49FCT2805T
PI49FCT806T
Fast CMOS
Buffer/Clock Driver
Product Features
ProductDescription
Extremelylowoutputskew:0.5ns
Monitor output pin
Pericom Semiconductors PI49FCT series of logic circuits are
produced using the Companys advanced 0.8 micron CMOS
technology, achieving industry leading speed grades.
Clock busing with Hi-Z state control
TTL input and CMOS output compatible
Extremelylowstaticpower(1mW,typ.)
Hysteresis on all inputs
The PI49FCT805T and PI49FCT2805T are non-inverting clock
drivers.ThePI49FCT806Tisaninvertingclockdriverdesignedwith
two independent groups of buffers that have Hi-Z state Output
Enable inputs (active LOW) with a 1-in, 5-out configuration per
group. Each clock driver consists of two banks of drivers, driving
five outputs each from a standard TTL-compatible CMOS input.
Packagesavailable:
20-pin209milwideSSOP(H)
20-pin300milwideSOIC(S)
20-pin150milwideQSOP(Q)
ThePI49FCT2805Talsofeaturesa25-ohmon-chipresistorforlower
noise.
Device models available on request
Industrial Operation at -40ºC to +85ºC
PI49FCT805T/2805TLogicBlockDiagram
PI49FCT806TLogicBlockDiagram
OEA
OEA
5
5
5
5
IN
A
OA0–4
OB0–4
IN
A
OA0–4
OB0–4
INB
INB
OEB
OEB
MON
MON
PS7006C
06/27/01
1
PI49FCT805T
PI49FCT2805T/PI49FCT806T
Fast CMOS Buffer/Clock Driver
ProductPinDescription
Pin Name
Description
OEA, OEB
INA, INB
Hi-Z State Output Enable Inputs (Active LOW)
Clock Inputs
OAN, OBN Clock Outputs (PI49FCT805T/PI49FCT2805T)
OAN, OBN Clock Output (PI49FCT806T)
MON
GND
VCC
Monitor Output
Ground
Power
PI49FCT805T/2805TTruthTable(1)
PI49FCT806TTruthTable(1)
Inputs
Outputs
Inputs
Outputs
OAN, OBN
OEA,OEB
INA,INB
OAN, OBN
MON
L
OEA,OEB
INA,INB
MON
H
L
L
L
H
L
L
H
Z
Z
L
L
L
H
L
H
L
Z
Z
H
L
H
H
L
H
H
H
H
H
H
L
Note:
1. H= HighVoltageLevel
L= LowVoltageLevel
Z= High Impedance
PI49FCT805T/2805TProductPinConfiguration
PI49FCT806TProductPinConfiguration
Vcc
A
1
2
3
4
5
6
7
8
9
10
20
19
18
17
16
15
14
13
12
11
VccB
Vcc
A
1
2
3
4
5
6
7
8
9
10
20
19
18
17
16
15
14
13
12
11
VccB
OA
OA
OA
0
1
2
OB
OB
OB
0
OA
OA
OA
0
1
2
OB
OB
OB
0
1
1
2
2
20-Pin
H, Q, S
20-Pin
H, Q, S
GND
A
GNDB
GNDA
GNDB
OA
OA
3
4
OB
OB
3
4
OA
3
4
OB
3
4
OA
OB
GND
OE
IN
B
A
A
MON
OE
IN
GND
OE
IN
B
A
A
MON
OE
IN
B
B
B
B
PS7006C
06/27/01
2
PI49FCT805T
PI49FCT2805T/PI49FCT806T
Fast CMOS Buffer/Clock Driver
MaximumRatings
(Above which the useful life may be impaired. For user guidelines, not tested.)
Note:
Storage Temperature ............................................................. 65°Cto+150°C
Ambient Temperature with Power Applied .............................. -40°Cto+85°C
Supply Voltage to Ground Potential (Inputs & Vcc Only) ....... 0.5Vto+7.0V
Supply Voltage to Ground Potential (Outputs & D/O Only) .... 0.5Vto+7.0V
DC Input Voltage ..................................................................... 0.5Vto+7.0V
DC Output Current ............................................................................... 120mA
Power Dissipation ................................................................................... 0.5W
Stresses greater than those listed under MAXIMUM
RATINGS may cause permanent damage to the de-
vice. This is a stress rating only and functional opera-
tion of the device at these or any other conditions
above those indicated in the operational sections of
thisspecificationisnotimplied. Exposuretoabsolute
maximumratingconditionsforextendedperiodsmay
affectreliability.
DCElectricalCharacteristics (Over the Operating Range, TA =40°Cto+85°C, VCC =5.0V±5%)
Parameters Description
TestConditions(1) Min. Typ(2) Max.
Units
VOH
VOL
OutputHIGHVoltage
VCC =Min.,VIN =VIH orVIL
IOH =24.0mA
2.4
3.3
V
Output LOW Current
VCC =Min.,VIN =VIH orVIL
IOL=64mA
0.3
0.3
0.55
0.50
V
V
IOL=12mA(25Ω)
VIH
VIL
IIH
InputHIGHVoltage
Input LOW Voltage
InputHIGHCurrent
Input LOW Current
GuaranteedLogicHIGHLevel
GuaranteedLogicLOWLevel
VCC=Max.
2.0
V
V
0.8
1
VIN =VCC
µA
µA
IIL
VCC=Max.
VIN=GND
1
IOZH
IOZL
HighImpedance
Output Current
VCC =Max.
VOUT =VCC
1
µA
µA
VOUT =GND
1
II
InputHIGHCurrent
ClampDiodeVoltage
ShortCircuitCurrent
Input Hysteresis
VCC =Max.,VIN =VCC (Max.)
VCC =Min., IIN = 18mA
VCC =Max.(3),VOUT = GND
VCC =5V
20
µA
V
VIK
IOS
VH
0.7
120
200
1.2
225
60
mA
mV
Capacitance(TA =25°C,f=1MHz)
Parameters(4)
Description
TestConditions
VIN =0V
Typ
Max.
Units
pF
CIN
Input Capacitance
Output Capacitance
6
8
10
12
COUT
VOUT =0V
pF
Notes:
1. For Max. or Min. conditions, use appropriate value specified under Electrical Characteristics for the applicable device type.
2. TypicalvaluesareatVCC =5.0V, +25°Cambientandmaximumloading.
3. Not more than one output should be shorted at one time. Duration of the test should not exceed one second.
4. This parameter is determined by device characterization but is not production tested.
PS7006C
06/27/01
3
PI49FCT805T
PI49FCT2805T/PI49FCT806T
Fast CMOS Buffer/Clock Driver
PowerSupplyCharacteristics
Parameters Description
TestConditions(1)
Min. Typ(2) Max.
Units
ICC
Quiescent Power
Supply Current
VCC=Max.
VCC =Max.
VCC =Max.,
VIN =GNDorVCC
3
30
µA
∆ICC
ICCD
Supply Current per
Input@TTLHIGH
VIN =3.4V(3)
0.5
2.0
mA
Supply Current per
Input per MHz(4)
VIN=VCC
VIN =GND
0.15
0.25
mA/
MHz
Outputs Open
OEA =OEB =GND
Per Output Toggling
50%DutyCycle
IC
Total Power Supply
Current(6)
VCC =Max.,
Outputs Open
fI =10MHZ
50%DutyCycle
OEA =OEB =GND
Five Outputs Toggling
VIN=VCC
VIN =GND
7.7
8.0
14.0(5)
15.0(5)
mA
VIN=3.4V
VIN =GND
VCC =Max.,
Outputs Open
fI =2.5MHZ
50%DutyCycle
OEA =OEB =GND
Eleven Outputs
Toggling
VIN=VCC
VIN =GND
4.3
4.8
8.4(5)
VIN=3.4V
VIN =GND
10.4(5)
Notes:
1. For Max. or Min. conditions, use appropriate value specified under Electrical Characteristics for the applicable device.
2. TypicalvaluesareatVcc=5.0V, +25°Cambient.
3. Per TTL driven input (VIN = 3.4V); all other inputs at Vcc or GND.
4. This parameter is not directly testable, but is derived for use in Total Power Supply Calculations.
5. Values for these conditions are examples of the Icc formula. These limits are guaranteed but not tested.
6. IC =IQUIESCENT + IINPUTS + IDYNAMIC
IC = ICC + ∆ICC DHNT + ICCD (fCP/2 + fINI)
ICC = Quiescent Current
∆ICC = Power Supply Current for a TTL High Input (VIN = 3.4V)
DH = Duty Cycle for TTL Inputs High
NT = Number of TTL Inputs at DH
ICCD = Dynamic Current Caused by an Input Transition Pair (HLH or LHL)
fCP = Clock Frequency for Register Devices (Zero for Non-Register Devices)
fI = Input Frequency
NI = Number of Inputs at fI
All currents are in milliamps and all frequencies are in megahertz.
PS7006C
06/27/01
4
PI49FCT805T
PI49FCT2805T/PI49FCT806T
Fast CMOS Buffer/Clock Driver
PI49FCT805/806TSwitchingCharacteristicsoverOperatingRange
805T/2805T/ 805AT/2805AT/ 805BT/2805BT/ 805CT/2805CT/
806T
806AT
806BT
806CT
Com.
Com
Com.
Com
Conditions(1)
Units
Min. Max. Min.
Max.
Min.
Max.
Min.
Max.
Parameters
Description
Propagation Delay
INA to OAN,
INB to OBN
tPLH
tPHL
1.5
1.5
1.5
6.5
8.0
7.0
0.7
1.0
1.5
1.5
1.5
5.8
1.5
1.5
1.5
5.0
1.5
1.5
1.5
4.5
Output Enable Time
OEA to OAN,
OEB to OBN
tPZH
tPZL
8.0
7.0
0.5
0.7
8.5
6.0
0.4
0.5
6.2
5.0
0.4
0.5
Output Disable Time(4)
OEA to OAN,
OEB to OBN
tPHZ
tPLZ
CL = 50pF
RL = 500Ω
(3)
ns
tSKEW(o)
Skew twx two outputs
of same package
(same transition)
(3)
tSKEW(p)
Skew twx opposite
transitions (tPHL-tPLH
)
of same output
(3)
tSKEW(t)
Skew twx two outputs
of different package at
same temperature
1.5
1.0
1.0
1.0
(same transition)
Notes:
1. See test circuit and wave forms.
2. Minimum limits are guaranteed but not tested on Propagation Delays.
3. Skew measured at worse cast temperature (max. temp).
4. This parameter is guaranteed but not production tested.
(1)
TestsCircuitsForAllOutputs
SwitchPosition
Test
Switch
Closed
Open
V
CC
Open Drain
Disable LOW
Enable LOW
7.0V
500Ω
500Ω
All Other Inputs
V
IN
VOUT
Pulse
Generator
D.U.T.
Definitions:
CL = Load capacitance: includes jig and probe capacitance.
RT = Termination resistance: should be equal to ZOUT of the
PulseGenerator.
50pF
RT
CL
PS7006C
06/27/01
5
PI49FCT805T
PI49FCT2805T/PI49FCT806T
Fast CMOS Buffer/Clock Driver
SwitchingWaveforms
OutputSkewtSK(o)
PropagationDelay
EnableandDisableTimes
Pulse Skew tSK(p)
Package Skew tSK(t)
PS7006C
06/27/01
6
PI49FCT805T
PI49FCT2805T/PI49FCT806T
Fast CMOS Buffer/Clock Driver
20-Pin209-MilSSOP(H)
20
5.00
5.60
.197
.220
1
0.09
0.25
.004
.009
.272
.295
6.90
7.50
.022
.037
0.55
0.95
.078
2.00
Max
.291
.322
7.40
8.20
SEATING
PLANE
.002
Min
0.050
.0098
Max.
0.25
.0256
BSC
0.65
DENOTES DIMENSIONS
IN MILLIMETERS
X.XX
X.XX
20-Pin150-MilQSOP(Q)
20
.008
0.20
MIN.
.008
.013
0.20
0.33
.150
.157
3.81
3.99
Guage Plane
0˚-6˚
.010
.016
.035
0.41
0.89
0.254
1
Detail A
.337 8.56
.344 8.74
.041
1.04
REF
.015 x 45˚
0.38
.058
1.47
REF
.053 1.35
.069 1.75
Detail A
0.178
0.254
.007
.010
SEATING
PLANE
.016 0.41
.050 1.27
.004 0.101
.010 0.254
.025
BSC
0.635
.228
.244
.008
.012
0.203
0.305
5.79
6.19
X.XX
X.XX
DENOTES DIMENSIONS
IN MILLIMETERS
PS7006C
06/27/01
7
PI49FCT805T
PI49FCT2805T/PI49FCT806T
Fast CMOS Buffer/Clock Driver
20-Pin 300-Mil SOIC (S)
20
7.40
7.60
.2914
.2992
0.254
x 45˚
0.737
.010
.029
1
.496
.511
12.60
12.99
.0091
.0125
0.23
0.32
0-8˚
0.41
1.27
.016
.050
.020 0.508
.030 0.762
REF
2.35
2.65
.0926
.1043
.394
.419
10.00
10.65
SEATING
PLANE
0.10
0.30
.0040
.0118
.050
BSC
1.27
.013
.020
X.XX
DENOTES CONTROLLING
0.33
0.51
X.XX
DIMENSIONS IN MILLIMETERS
OrderingInformation
Ordering Code
Marking Code
PI49FCT805Tpx
PI49FCT2805Tpx
PI49FCT806Tpx
PI49FCT805xTp
PI49FCT2805xTp
PI49FCT806xTp
Note: x = Speed Grades: blank, A, B, C.
p = Package Type:
H=209-milSSOP
Q=150-milQSOP
S=300-milSOIC
Example:
PI49FCT2805ATH=Agrade,HpkgmarkedasPI49FCT2805THA
Pericom Semiconductor Corporation
2380 Bering Drive • San Jose, CA 95131 • 1-800-435-2336 • Fax (408) 435-1100 • http://www.pericom.com
PS7006C
06/27/01
8
PI49FCT2805CTSE 相关器件
型号 | 制造商 | 描述 | 价格 | 文档 |
PI49FCT2805CTSX | PERICOM | 暂无描述 | 获取价格 | |
PI49FCT2805T | ETC | Clock IC | 5+5 Output Clock Driver with 25 Ohm. Industrial Temp. Operation | 获取价格 | |
PI49FCT2805TH | PERICOM | Fast CMOS Buffer/Clock Driver | 获取价格 | |
PI49FCT2805THA | PERICOM | Fast CMOS Buffer/Clock Driver | 获取价格 | |
PI49FCT2805THB | PERICOM | Fast CMOS Buffer/Clock Driver | 获取价格 | |
PI49FCT2805THC | PERICOM | Fast CMOS Buffer/Clock Driver | 获取价格 | |
PI49FCT2805THE | PERICOM | Low Skew Clock Driver, FCT Series, 5 True Output(s), 0 Inverted Output(s), CMOS, PDSO20, 0.209 INCH, SSOP-20 | 获取价格 | |
PI49FCT2805TP | ETC | Five Distributed-Output Clock Driver | 获取价格 | |
PI49FCT2805TQ | PERICOM | Fast CMOS Buffer/Clock Driver | 获取价格 | |
PI49FCT2805TQA | PERICOM | Fast CMOS Buffer/Clock Driver | 获取价格 |
PI49FCT2805CTSE 相关文章
- 2024-09-20
- 6
- 2024-09-20
- 9
- 2024-09-20
- 8
- 2024-09-20
- 6