PI6C22405-1HWE [PERICOM]

PLL Based Clock Driver, 6C Series, 4 True Output(s), 0 Inverted Output(s), PDSO8, 0.150 INCH, GREEN, MS-012D/AA, SOIC-8;
PI6C22405-1HWE
型号: PI6C22405-1HWE
厂家: PERICOM SEMICONDUCTOR CORPORATION    PERICOM SEMICONDUCTOR CORPORATION
描述:

PLL Based Clock Driver, 6C Series, 4 True Output(s), 0 Inverted Output(s), PDSO8, 0.150 INCH, GREEN, MS-012D/AA, SOIC-8

驱动 光电二极管 逻辑集成电路
文件: 总6页 (文件大小:515K)
中文:  中文翻译
下载:  下载PDF数据表文档文件
PI6C22405-1H  
2.5/3.3V 200 MHz High-Speed, Low-Jitter, Low-Skew,  
Zero-Delay Clock Buffer with 5 Outputs  
Features  
Description  
• Phase-Lock Loop Clock Distribution  
(Zero Input-to-Output Delay)  
• Internal feedback connection  
• Distributes one to one bank of five outputs  
• High-Performance  
ThePI6C22405-1Hisalow-jitter,low-skew,high-speedZero-Delay  
Buffer with 5 outputs designed to address high-speed clock  
distribution applications.  
ThePI6C22405-1HfeaturesaninternalpatentedPhaseLockLoop  
• 30 MHz to 220 MHz operation frequency range  
• <100ps output-to-output skew  
• <100ps cycle-to-cycle jitter  
• Low Power Consumption - 25mA (outputs unloaded)  
• Spread-spectrum capable  
• Power supply  
(PLL) with high drive output capability and internal feedback.  
The PI6C22405-1H operates from a 2.5V±5% or 3.3V±10%  
supply, guaranteed over the full industrial temperature range  
of -40°C to +85°C. All support documentation can be found on  
Pericom’s web site at: www.pericom.com.  
• +2.5V ±5%  
Pericom can customize these devices for specific requirements.  
• +3.3V ±10%  
Temperature range  
• -40°C to +85°C Industrial temp range  
• Packaging (Pb-free & Green):  
—8-pin TSSOP (L8)  
—8-pin SOIC (W8)  
Block Diagram  
Pin Configuration  
CLKOUT  
1
2
3
4
8
7
6
5
REF  
CLKOUT  
PLL  
REF  
CLK  
CLK  
CLK  
CLK  
1
2
3
4
CLK  
CLK  
2
1
4
CLK  
V
DD  
GND  
CLK  
3
Pin Description  
Pin  
Signal  
Description  
Reference clock input with weak pull down.  
1
REF  
2, 3,  
5, 7  
CLK2, CLK1,  
CLK3, CLK4,  
Clock output. Clock outputs contain a weak pull-down.  
8
4
6
CLKOUT  
GND  
Clock output. Internal feedback on this pin.  
Ground  
Power  
V
DD  
PS9029A  
03/17/10  
1
10-0137  
PI6C22405-1H  
2.5/3.3V 200MHz Zero-Delay Clock Buffer with 5 Outputs  
(1)  
(2)  
Maximum Ratings  
Operation Ratings  
Supply Voltage  
Supply Voltage  
V
........................................................-0.5V to +4.6V  
V
V
…………………………. ……..+3.0V to +3.6V  
…………………...… ……+2.375V to +2.625V  
DD  
DD  
DD  
REF…………………………………....-0.5V to +4.6V  
Input Current …………………………………... .-50mA  
Output Current ... …………………………………..±50mA  
Lead Temperature (soldering, 10 sec.).....................+260°C  
Storage Temperature (Ts).......................... -65°C to +150°C  
Junction Temperature…...…….……………….......+150°C  
Operating Temperature (industrial)….........-40°C to +85°C  
(2)  
Package Thermal Resistance  
θJA  
Still-Air…………………………………..…157°C/W  
θJB  
Junction-to-Board............................................... 42°C  
Notes:  
1. Stresses greater then those listed under Maximum Ratings may cause permanent damage to the device. This is a stress rating only and  
functional operation of the device at these or any other conditions above those indicated in the operational sections of the this specifications is  
not implied. Exposure to absolute maximum rating conditions for extended periods may affect reliability.  
2. θJA and θJB values are determined for a 4-layer board in still-air, unless otherwise stated.  
DC Electrical Characteristics  
Parameter  
Description  
Test Conditions  
Min.  
Max.  
0.8  
Units  
V
V
V
V
V
V
= 3.3V  
= 2.5V  
= 3.3V  
= 2.5V  
DD  
DD  
DD  
DD  
V
Input LOW Voltage  
IL  
0.7  
V
2.0  
1.7  
V
IH  
Input HIGH Voltage  
I
Input LOW Current  
Input HIGH Current  
= 0V  
10  
IL  
IN  
IN  
µA  
I
= V  
100  
0.25  
0.35  
IH  
DD  
V
V
= 3.3V  
= 2.5V  
DD  
V
Output LOW Voltage  
I
= 12mA  
OL  
OL  
DD  
V
V
V
= 2.5V, I = 12mA  
1.9  
DD  
OH  
V
OH  
Output HIGH Voltage  
Supply Current  
= 3.3V, I = 12mA  
2.55  
DD  
OH  
I
DD  
Unloaded outputs 66 MHz  
22  
mA  
PS9029A  
03/17/10  
10-0137  
2
PI6C22405-1H  
2.5/3.3V 200MHz Zero-Delay Clock Buffer with 5 Outputs  
AC Electrical Characteristics  
Parameter Description  
Test Conditions  
Min. Typ. Max. Units  
V
V
V
V
= 2.5V, C = 15pF  
10  
10  
200 MHz  
220 MHz  
DD  
DD  
DD  
DD  
L
F
Output Frequency  
Bandwidth for PLL  
O
= 3.3V, C = 15pF  
L
= 2.5V  
= 3.3V  
0.8  
1.5  
50  
BW  
MHz  
(1)(4)  
t
Duty Cycle  
Measured at V /2, 10pF load  
45  
55  
1
%
DC  
DD  
For 3.3V: Measured between 0.8V and 2.0V @ 10pF  
For 2.5V: Measured between 0.6V and 1.8V @ 10pF  
For 3.3V: Measured between 0.8V and 2.0V @ 10pF  
For 2.5V: Measured between 0.6V and 1.8V @ 10pF  
(1)(4)  
t
Rise Time  
R
1.8  
1
ns  
(1)(4)  
t
F
Fall Time  
1.8  
90  
90  
V
V
= 3.3V  
= 2.5V  
DD  
All outputs equally  
loaded  
(2)  
t
Output to Output Skew  
sk(o)  
DD  
Delay, REF Rising Edge  
to CLKOUT Rising  
Edge  
V
= 3.3V  
= 2.5V  
-100  
-200  
100  
200  
DD  
DD  
Measured at V /2 @  
66MHz  
DD  
ps  
t
0
(2)  
V
(3)  
t
Device-to-device Skew  
Measured at V /2 on CLKx pins of device  
-300  
+300  
SK(D)  
DD  
V
DD  
V
DD  
V
DD  
V
DD  
V
DD  
V
DD  
V
DD  
V
DD  
V
DD  
V
DD  
V
DD  
V
DD  
V
DD  
V
DD  
V
DD  
V
DD  
= 3.3V  
= 2.5V  
= 3.3V  
= 2.5V  
= 3.3V  
= 2.5V  
= 3.3V  
= 2.5V  
= 3.3V  
= 2.5V  
= 3.3V  
= 2.5V  
= 3.3V  
= 2.5V  
= 3.3V  
= 2.5V  
47  
42  
45  
40  
63  
83  
51  
66  
39  
28  
39  
27  
48  
75  
43  
60  
110  
90  
15pF load, >66MHz,  
standard drive  
100  
80  
15pF load, >66MHz,  
high drive  
t
Cycle-to-Cycle Jitter  
ps  
JIT  
120  
130  
115  
115  
90  
30pF load, >66MHz,  
standard drive  
30pF load, >66MHz,  
high drive  
15pF load, >66MHz,  
standard drive  
60  
85  
15pF load, >66MHz,  
high drive  
55  
t
Period Jitter (Peak)  
ps  
PJ  
85  
30pF load, >66MHz,  
standard drive  
90  
75  
30pF load, >66MHz,  
high drive  
80  
(1)  
t
PLL Lock Time  
Stable power supply, valid clocks presented on REF pin  
1.0  
ms  
LOCK  
Note:  
1. See Switching Waveforms  
2. All clock output should have the same loading to achieve zero delay between the input and outputs and zero output-to-output skew. Since the  
CLKOUT pin is the internal feedback to the PLL, its relative loading can adjust the input-to-output delay. If input-to-output delay adjustments  
are needed, the CLKOUT load may be changed to vary the delay between the REF input to the clock outputs. Output-to-output skew includes  
CLK 1-4.  
3. Specifications are guaranteed by design and not production tested.  
4. Measured at 100MHz.  
PS9029A  
03/17/10  
10-0137  
3
PI6C22405-1H  
2.5/3.3V 200MHz Zero-Delay Clock Buffer with 5 Outputs  
Switching Waveforms  
t
t
t
Duty Cycle Timing  
high  
V
low  
V
high  
t
DC =  
V
/2  
/2  
/2  
t
t
DD  
DD  
DD  
high low  
All Outputs Rise/Fall Time  
Output-Output Skew  
3.3V  
2.0V  
0.8V  
2.0V  
0.8V  
OUTPUT  
0V  
t
t
R
F
V
/2  
DD  
OUTPUT  
OUTPUT  
V
/2  
DD  
t
SK(O)  
Device-Device Skew  
V
/2  
DD  
OUTPUT Device 1  
OUTPUT Device 2  
V
/2  
DD  
t
SK(D)  
Input-Output Propagation Delay  
V
/2  
DD  
INPUT  
V
/2  
DD  
OUTPUT  
t
0
Test Circuit 1  
Test Circuit 2  
0.1µF  
0.1µF  
0.1µF  
0.1µF  
V
V
V
DD  
OUTPUTS  
DD  
1kΩ  
1kΩ  
CLK out  
CLK out  
10pF  
OUTPUTS  
C
LOAD  
V
DD  
DD  
GND GND  
GND GND  
Test Circuit for all parameters except tSLEW  
Test Circuit for tSLEW Output slew  
,
PS9029A  
03/17/10  
10-0137  
4
PI6C22405-1H  
2.5/3.3V 200MHz Zero-Delay Clock Buffer with 5 Outputs  
Packaging Mechanical: 8-pin SOIC (W)  
DOCUMENT CONTROL NO.  
PD - 1001  
8
REVISION: F  
DATE: 03/09/05  
.149  
.157  
3.78  
3.99  
0.25  
0.50  
.0099  
.0196  
x 45˚  
1
0.19  
0.25  
.0075  
.0098  
.189  
.196  
4.80  
5.00  
0-8˚  
0.40 .016  
1.27  
.050  
.2284  
.2440  
5.80  
6.20  
.016  
.026  
0.406  
0.660  
1.35  
1.75  
.053  
.068  
SEATING PLANE  
REF  
.050  
BSC  
0.10  
0.25  
.0040  
.0098  
1.27  
.013  
.020  
0.330  
0.508  
Pericom Semiconductor Corporation  
3545 N. 1st Street, San Jose, CA 95134  
1-800-435-2335 • www.pericom.com  
X.XX DENOTES DIMENSIONS  
X.XX IN MILLIMETERS  
Notes:  
DESCRIPTION: 8-Pin, 150-Mil Wide, SOIC  
PACKAGE CODE: W  
1) Controlling dimensions in millimeters.  
2) Ref: JEDEC MS-012D/AA  
Note:  
• For latest package info, please check: http://www.pericom.com/products/packaging/mechanicals.php  
PS9029A  
03/17/10  
10-0137  
5
PI6C22405-1H  
2.5/3.3V 200MHz Zero-Delay Clock Buffer with 5 Outputs  
Packaging Mechanical: 8-pin TSSOP (L)  
DOCUMENT CONTROL NO.  
PD - 1308  
REVISION: E  
DATE: 11/15/05  
Pericom Semiconductor Corporation  
3545 N. 1st Street, San Jose, CA 95134  
1-800-435-2335 • www.pericom.com  
Note:  
1. Package Outline Exclusive of Mold Flash and Metal Burr  
2. Controlling dimentions in millimeters  
3. Ref: JEDEC MO-153F/AA  
DESCRIPTION: 8-Pin, 173-Mil Wide,TSSOP  
PACKAGE CODE: L  
Note:  
• For latest package info, please check: http://www.pericom.com/products/packaging/mechanicals.php  
(1,2,3)  
Ordering Information  
Ordering Code  
Package Code  
Package Description  
PI6C22405-1HWE  
W
W
L
Pb-free & Green, 8-pin SOIC  
PI6C22405-1HWIE  
PI6C22405-1HLE  
PI6C22405-1HLIE  
Notes:  
Pb-free & Green, 8-pin SOIC, Industrial temp range  
Pb-free & Green, 8-pin TSSOP  
L
Pb-free & Green, 8-pin TSSOP, Industrial temp range  
1. Latest Thermal characteristics can be found on the company web site at www.pericom.com/packaging/  
2. E = Pb-free & Green  
3. Adding an X suffix = Tape/Reel  
Pericom Semiconductor Corporation • 1-800-435-2336 • www.pericom.com  
PS9029A  
03/17/10  
10-0137  
6

相关型号:

PI6C22405LE

PLL Based Clock Driver, 6C Series, 4 True Output(s), 0 Inverted Output(s), PDSO8, 0.173 INCH, GREEN, MO-153FA, TSSOP-8
PERICOM

PI6C22405LEX

PLL Based Clock Driver, 6C Series, 4 True Output(s), 0 Inverted Output(s), PDSO8, 0.173 INCH, GREEN, MO-153FA, TSSOP-8
PERICOM

PI6C22405LIE

PLL Based Clock Driver, 6C Series, 4 True Output(s), 0 Inverted Output(s), PDSO8, 0.173 INCH, GREEN, MO-153FA, TSSOP-8
PERICOM

PI6C22405LIEX

PLL Based Clock Driver, 6C Series, 4 True Output(s), 0 Inverted Output(s), PDSO8, 0.173 INCH, GREEN, MO-153FA, TSSOP-8
PERICOM

PI6C22405WE

PLL Based Clock Driver, 6C Series, 4 True Output(s), 0 Inverted Output(s), PDSO8, 0.150 INCH, GREEN, MS-012DA, SOIC-8
PERICOM

PI6C22405WEX

PLL Based Clock Driver, 6C Series, 4 True Output(s), 0 Inverted Output(s), PDSO8, 0.150 INCH, GREEN, MS-012DA, SOIC-8
PERICOM

PI6C22405WIE

PLL Based Clock Driver, 6C Series, 4 True Output(s), 0 Inverted Output(s), PDSO8, 0.150 INCH, GREEN, MS-012DA, SOIC-8
PERICOM

PI6C22405WIEX

PLL Based Clock Driver, 6C Series, 4 True Output(s), 0 Inverted Output(s), PDSO8, 0.150 INCH, GREEN, MS-012DA, SOIC-8
PERICOM

PI6C22409-1HWEX

PLL Based Clock Driver, 6C Series, 8 True Output(s), 0 Inverted Output(s), PDSO16, 0.150 INCH, GREEN, MS-012D/AC, SOIC-16
PERICOM

PI6C22409WIEX

PLL Based Clock Driver, 6C Series, 8 True Output(s), 0 Inverted Output(s), CMOS, PDSO16, 0.150 INCH, GREEN, MS-012D/AC, SOIC-16
PERICOM

PI6C22510LE

Clock Driver, 6C Series, 10 True Output(s), 0 Inverted Output(s), PDSO24, 0.173 INCH, GREEN, MO-153F/AD, TSSOP-24
DIODES

PI6C22510LEX

Clock Driver, 6C Series, 10 True Output(s), 0 Inverted Output(s), PDSO24, 0.173 INCH, GREEN, MO-153F/AD, TSSOP-24
DIODES