PT7M8218B17CE [PERICOM]
300mA, High PSRR, LDO Regulator;型号: | PT7M8218B17CE |
厂家: | PERICOM SEMICONDUCTOR CORPORATION |
描述: | 300mA, High PSRR, LDO Regulator |
文件: | 总11页 (文件大小:409K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
PT7M8218
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
300mA, High PSRR, LDO Regulator
Description
Features
PT7M8218 is a high accurate, low dropout voltage
Input Voltage Range: 1.7V to 5.5V
300mA Guaranteed Output Current
Stable with 0.47F Ceramic Output Capacitors
Low Dropout Voltage 150mV@150mA (Vout=2.8V)
Low Quiescent Current 36A
regulator with low noise, high ripple rejection and low
current consumption.
PT7M8218 includes a reference voltage source, an error
amplifier, a driver transistor, a current limit protection, a
thermal protection and an internal phase compensator.
The output voltage for the regulator is set by factory
trimming within a range of 0.9V to 3.3V in 100mV step
includes 2.85V. PT7M8218 is stable with low ESR
ceramic capacitors.
High PSRR 75dB@1kHz
Auto Output Discharge
High Output Accuracy ±2% Initial Accuracy
Thermal Shutdown and Current Limit Protection
Operating Temperature Range: -40°C to +85°C
Package: SC70-5L and SOT23-5L
PT7M8218 is available in SC70-5L and SOT23-5L
packages. It operates over a temperature range of -40 to
+85°C.
Applications
Cell Phones
Mobile Phones (PDC, GSM, CDMA, IMT2000 etc.)
Cordless Phones and Radio Communication
Digital Still Cameras and Video Cameras
PDA
MP3 Players
Portable Devices
Pin Assignment
1
5
4
VIN
VOUT
NC
GND
EN
2
3
SC70-5L /SOT23-5L
Pin Description
Pin No
I/O
Pin Name
Description
Regulator Supply Input. Supply voltage can range from 1.7V to 5.5V. Bypass with
a 0.47F ceramic capacitor (X5R/X7R) to GND.
1
I
VIN
2
3
4
5
P
I
GND
EN
Ground.
ON/OFF Control of Regulator. High active.
-
NC
This pin is better to be connected to the GND, but leaving it open is also acceptable
Output of Regulator. Bypass with a 0.47F ceramic capacitor (X5R/X7R) to GND.
O
VOUT
12-11-0014
PT0440-1
11/21/12
1
PT7M8218
300mA, High PSRR, LDO Regulator
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Maximum Ratings
Storage Temperature………………………………..…... -55oC to +125oC
Note:
Ambient Temperature with Power Applied......................... -40 oC to 85oC
Stresses greater than those listed under MAXIMUM
Input Voltage …………………………………………................... +6.0V
Output Voltage ………………………………………. -0.3 to VCC +0.3V
EN pin Voltage ………………………………………………...… +6.0V
DC Input/Output Current ……………………………….………..700mA
Power Dissipation……………………………………….…SC70/300mW
SOT23/400mW
RATINGS may cause permanent damage to the
device. This is a stress rating only and functional
operation of the device at these or any other
conditions above those indicated in the operational
sections of this specification is not implied.
Exposure to absolute maximum rating conditions
for extended periods may affect reliability.
Recommended Operating Conditions
Symbol
Parameter
Conditions
Min.
1.7
0
Typ.
Max.
5.5
Unit
V
VIN
Operating Voltage
Control Input Voltage
Operating Temperature
-
-
-
-
-
VEN
5.5
V
TA
-40
25
85
°C
DC Electrical Characteristics
(TA =25°C, VIN = VOUT + 1V for VOUT options greater than 1.5V. VIN = 2.5V for VOUT ≤1.5V, unless otherwise noted.)
Parameter
Symbol
VOUT(E)
VIN
Conditions
Min.
Typ.
Max.
Unit
VOUT(S)
0.98
*
VOUT(S)
1.02
*
Output Voltage
*
VIN=VOUT(S)* +1.0V, IOUT=30mA
VOUT(S)
V
V
Input Voltage
Maximum Output
Current
-
1.7
-
-
5.5
300
-
mA
IOUTMAX
VIN=VOUT(S)+1.0V
150
180
36
2.8V ≤VOUT(S)
IOUT = 150mA
-
-
-
-
-
-
50
1
Dropout Voltage
VDIF
ISS
*
mV
VOUT(S) ≤2.7V
Supply Current
Standby Current
VIN = VOUT(S) +1.0V, no load
VIN = VOUT(S)+1.0V, EN=GND
µA
A
ISTB
0.05
ΔVOUT
ΔVIN*VOUT
/
Line Regulation
Load Regulation
VOUT(S)+1.0V≤VIN≤5.5V, IOUT=30mA
-
-
0.02
10
0.2
%/V
VIN = VOUT(S)+1.0V,
1.0mA≤IOUT ≤150mA
ΔVOUT2
mV
Output Voltage
Temperature
Characteristic
ΔVOUT
ΔTopr*VOUT
/
-
-
+/-100
75
-
-
ppm/℃
IOUT=30mA, -40℃≤Topr≤85℃
VIN=[VOUT(S)+1.0]VDC+0.2Vp-p AC
IOUT=30mA, f=1kHz
(In case that Vout≤2.0V, VIN=3.0V)
VOUT = VOUT(S)*0.9
Vout=0V
Ripple Rejection
PSRR
dB
Current Limit
Short Current Limit
Thermal Shutdown
Thermal Shutdown
Hysteresis
ILIM
ISC
TSD
-
-
-
400
40
170
-
-
-
mA
mA
-
℃
-
1.2
-
20
-
-
-
ΔTSD
VENH
VENL
-
-
-
EN “High” Voltage
V
EN “Low” Voltage
-
0.3
EN “High” Current
EN “Low” Current
Output Discharge
Resistance
Output Voltage Noise
Note:
*1: VOUT(S)=Specified output voltage
*2: VOUT(E)=Effective output voltage
IENH
IENL
VIN=VOUT(S)+1.0V
VIN= VOUT(S)+1.0V, EN=OFF
-0.10
-0.10
-
-
0.10
0.10
µA
Rdis
VN
VIN = 4.0V, EN=OFF
-
-
50
60
-
-
Ω
COUT=0.47µF, 10Hz to 100kHz
µVrms
(I.e. the output voltage when "VOUT(S)+1.0V" is provided at the VIN pin while maintaining a certain IOUT value).
*3: VDIF={VIN1(*5) -VOUT1(*4)
}
12-11-0014
PT0440-1
11/21/12
2
PT7M8218
300mA, High PSRR, LDO Regulator
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
*4: VOUT1=A voltage equal to 98% of the output voltage whenever an amply stabilized IOUT {VOUT(S)+1.0V} is input.
*5: VIN1=The input voltage when VOUT1 appears as input voltage is gradually decreased.
*6: Unless otherwise stated, VIN=VOUT(S) +1.0V
Application Circuits
Power Input
VIN
EN
VO UT
LDO OUTPUT
ON/OFF Input
C ou t
C i n
GND
S in gle GND
Note: Cin and Cout are 0.47F low ESR ceramic capacitors
12-11-0014
PT0440-1
11/21/12
3
PT7M8218
300mA, High PSRR, LDO Regulator
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Block Diagram
VOUT
Over-current
Protection Circuit
EN
ON/OFF
Circuit
GND
VIN
Ref erence
Voltage Circuit
Functional Description (Refer to Block Diagram)
Output Voltage
The divided output voltage is compared with the internal reference voltage by the error amplifier with internal phase
compensator. The output of the error amplifier then drives the P-channel MOSFET to maintain a stable and constant output
voltage.
Low ESR Capacitors
The internal phase compensator maintains the stable output voltage with low ESR ceramic input and output capacitors.
0.47F low ESR (X5R/X7R) ceramic capacitor located as close as possible to the IC’s pins is recommended.
Current Limit and Thermal Shutdown Protections
Current limit protection is used to limit the output current when an overload condition occurs. As a result, the output voltage
will drop. Thermal shutdown protection will turn off the output to reduce the power dissipation when the operation junction
temperature exceeds 170°C .
EN Pin
The output of the regulator in PT7M8218 can be controlled with EN pin. The EN pin should be connected to a “VIN” or a
“GND” voltage as a floating input applied to inverter input of the enable circuitry will increase the current consumption.
NOTE ON USE
Please use this IC within the stated absolute maximum ratings.
Where wiring impedance is high, operations may become unstable due to noise and/or phase lag depending on output current.
Please keep the resistance low between VIN and GND wiring in particular.
Please wire the input capacitor (Cin) and the output capacitor (Cout) as close to the IC as possible.
12-11-0014
PT0440-1
11/21/12
4
PT7M8218
300mA, High PSRR, LDO Regulator
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Typical Performance Characteristics
1. Output Voltage vs. Output Current
(Vout=1.1V)
(Vout=3.3V)
Cin=0.47µF(Ceramics), Cout=0.47µF(Ceramics), TA=25°C
Cin=0.47µF(Ceramics), Cout=0.47µF(Ceramics), TA=25°C
3.5
1.2
3
1
Vin=4.3V
Vin=5.0V
Vin=5.5V
Vin=2.5V
2.5
0.8
0.6
0.4
0.2
0
Vin=3.5V
Vin=5.5V
2
1.5
1
0.5
0
0
50
100
150
200
250
300
350
400
0
50
100
150
200
250
300
350
400
450
Iout (mA)
Iout (mA)
2. Output Voltage vs. Input Voltage
(Vout=1.1V)
(Vout=3.3V)
Cin=0.47µF(Ceramics), Cout=0.47µF(Ceramics), TA=25°C
Cin=0.47µF(Ceramics), Cout=0.47µF(Ceramics), TA=25°C
3.5
1.2
3
1
1mA
1mA
2.5
2
30mA
50mA
0.8
0.6
0.4
0.2
0
30mA
50mA
1.5
1
0.5
0
0
1
2
3
4
5
0
1
2
3
Vin (V)
4
5
6
Vin (V)
12-11-0014
PT0440-1
11/21/12
5
PT7M8218
300mA, High PSRR, LDO Regulator
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
3. Supply Current vs. Input Voltage
(Vout=3.3V)
Vin=4.3V
(Vout=1.1V)
Vin=2.5V
Cin=0.47µF(Ceramics), Cout=0.47µF(Ceramics), TA=25°C
Cin=0.47µF(Ceramics), Cout=0.47µF(Ceramics), TA=25°C
50
45
40
35
30
25
20
15
10
5
50
45
40
35
30
25
20
15
10
5
0
0
0
1
2
3
4
5
0
1
2
3
4
5
Vin (V)
Vin (V)
4. Output Voltage vs. Ambient Temperature
(Vout=3.3V)
(Vout=1.1V)
Vin=4.3V, IOUT=30mA
Vin=2.5V, IOUT=30mA
Cin=0.47µF(Ceramics), Cout=0.47µF(Ceramics), TA=25°C
Cin=0.47µF(Ceramics), Cout=0.47µF(Ceramics), TA=25°C
1.2
1.18
1.16
1.14
1.12
1.1
3.35
3.33
3.31
3.29
3.27
3.25
1.08
1.06
1.04
1.02
1
-40
-20
0
20
40
60
80
-40
-20
0
20
40
60
80
Temperature (°C)
Temperature (°C)
12-11-0014
PT0440-1
11/21/12
6
PT7M8218
300mA, High PSRR, LDO Regulator
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
5. Supply Current vs. Ambient Temperature
(Vout=3.3V)
Vin=4.3V
(Vout=1.1V)
Vin=2.5V
Cin=0.47µF(Ceramics), Cout=0.47µF(Ceramics), TA=25°C
Cin=0.47µF(Ceramics), Cout=0.47µF(Ceramics), TA=25°C
35
34
33
32
31
30
29
28
27
26
25
35
34
33
32
31
30
29
28
27
26
25
-40
-20
0
20
40
60
80
-40
-20
0
20
40
60
80
Temperature (°C)
Temperature (°C)
6. Line Transient Response
(Vout=3.3V)
7. Load Transient Response
(Vout=3.3V)
Cin=0.47µF(Ceramics), Cout=0.47µF(Ceramics), TA=25°C
Time (50µs/div)
Cin=0.47µF(Ceramics), Cout=0.47µF(Ceramics), TA=25°C
Time (40µs/div)
Vin=5.3V
Vin=4.3V
Vin: 1V/div
Vout: 50mV/div
Iout=100mA
Vout: 20mV/div
Iout=50mA
Iout: 50mA/div
12-11-0014
PT0440-1
11/21/12
7
PT7M8218
300mA, High PSRR, LDO Regulator
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
8. Turn On Speed with EN pin
(Vout=3.3V)
9. Turn Off Speed with EN pin
(Vout=3.3V)
Cin=0.47µF(Ceramics), Cout=0.47µF(Ceramics), TA=25°C
Cin=0.47µF(Ceramics), Cout=0.47µF(Ceramics), TA=25°C
Time (20µs/div)
Time (20µs/div)
EN Voltage
EN Voltage
Vout Voltage
Vout Voltage
10. PSRR
(Vout=0.9V)
Vin=3.0V DC+0.2Vp-pAC
Cout=0.47uF(Ceramics), Iout=30mA
80
70
60
50
40
30
20
10
0
0.1
1
10
100
Frequenct (kHz)
12-11-0014
PT0440-1
11/21/12
8
PT7M8218
300mA, High PSRR, LDO Regulator
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Mechanical Information
SC70-5L
PKG. DIMENSIONS(MM)
SYMBOL
MIN
0.90
0.00
0.90
0.15
0.08
2.00
1.15
2.15
MAX
1.10
0.10
1.00
0.35
0.15
2.20
1.35
2.45
A
A1
A2
b
c
D
E
E1
e
Note:
1) Controlling dimensions in millimeters.
2) Ref: JEDEC MO-203B/AA
0.65TYP
e1
L
1.20
0.26
1.40
0.46
θ
0°
8°
12-11-0014
PT0440-1
11/21/12
9
PT7M8218
300mA, High PSRR, LDO Regulator
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
SOT23-5L
PKG. DIMENSIONS(MM)
SYMBOL
MIN
1.05
0.00
1.05
0.30
0.10
MAX
1.25
0.10
1.15
0.50
0.20
A
A1
A2
b
c
D
2.82
3.02
Note:
E
E1
e
1.50
2.65
1.70
2.95
1) Controlling dimensions in millimeters.
2) Ref: JEDEC MO-178C/AA
0.95BSC
e1
L
1.80
0.30
0°
2.00
0.60
8°
θ
12-11-0014
PT0440-1
11/21/12
10
PT7M8218
300mA, High PSRR, LDO Regulator
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Ordering Information
Part Number
Package Code
Package
Top Marking
See below Table1
See below Table1
PT7M8218B①②TAE
TA
C
Lead Free and Green SOT23-5L
Lead Free and Green SC70-5L
PT7M8218B①②CE
Notes:
E = Pb-free and Green
Adding X Suffix= Tape/Reel
“B” of PT7M8218B①② means high active for control pin “EN”
“①②” refer to different output voltage. See below Table1
Contact Pericom for availability.
Table1 Sequential Number Description
Designator
VOUT (V)
①②
Top Marking
Designator
①②
Top Marking
VOUT (V)
09
10
11
12
13
14
15
16
17
18
19
20
21
0.9
1.0
1.1
1.2
1.3
1.4
1.5
1.6
1.7
1.8
1.9
2.0
2.1
j
-
k
m
-
-
-
-
-
-
-
-
-
22
2.2
2.3
2.4
2.5
2.6
2.7
2.8
2.9
3.0
3.1
3.2
3.3
2.85
-
-
-
-
-
-
n
-
p
-
-
23
24
25
26
27
28
29
30
31
32
33
2A
q
-
Pericom Semiconductor Corporation 1-800-435-2336 www.pericom.com
Pericom reserves the right to make changes to its products or specifications at any time, without notice, in order to improve design or performance and to supply
the best possible product. Pericom does not assume any responsibility for use of any circuitry described other than the circuitry embodied in Pericom product. The
company makes no representations that circuitry described herein is free from patent infringement or other rights, of Pericom.
12-11-0014
PT0440-1
11/21/12
11
相关型号:
©2020 ICPDF网 联系我们和版权申明