TDA9983AHW/8/C114Y [NXP]
TDA9983A_SDS - HDMI transmitter up to 150 MHz pixel rate with 3 x 8-bit video inputs and 4 x I2S-bus with S/PDIF QFP 80-Pin;
| 型号： | TDA9983AHW/8/C114Y |
| 厂家： | 
NXP |
| 描述： | TDA9983A_SDS - HDMI transmitter up to 150 MHz pixel rate with 3 x 8-bit video inputs and 4 x I2S-bus with S/PDIF QFP 80-Pin 光电二极管 |
| 文件： | 总9页 (文件大小：57K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
TDA9983A
HDMI transmitter up to 150 MHz pixel rate with 3 × 8-bit video
inputs and 4 × I2S-bus with S/PDIF
Rev. 01 — 13 March 2008
Product short data sheet
1. General description
The TDA9983A is an HDMI transmitter (which also supports DVI) that enables a 3 × 8-bit
RGB or YCBCR video stream (with a pixel rate up to 150 MHz for the TDA9983AHW/15
version), up to 4 I2S-bus audio streams (with an audio sampling rate up to 192 kHz) and
the additional information required by all the HDMI 1.2a standards.
A programmable upscaling block enables a 720p/1080i output from a standard definition
input. An intrafield deinterlacer is included in the scaler.
In order to be compatible with most applications, the TDA9983A integrates a full
programmable input formatter and color space conversion block. The video input formats
accepted are YCBCR 4 : 4 : 4 (up to 3 × 8-bit), YCBCR 4 : 2 : 2 semi-planar (up to
2 × 12-bit), YCBCR 4 : 2 : 2 compliant with ITU656 and ITU656-like (up to 1 × 12-bit).
For ITU656-like formats, double edges are supported so that data can be sampled on
rising and falling edges.
The TDA9983A also includes a HDCP 1.1 compliant cipher block. The HDCP key set is
stored internally in a One Time Programming (OTP) non-volatile memory for maximum
security.
The device can be controlled via an I2C-bus interface.
TDA9983A
NXP Semiconductors
150 MHz pixel rate HDMI transmitter
VIDEO STANDARD OUTPUT
FORMAT
861B
FORMAT
861B
(1) (2) (3)
(1)
2, 3
720
1280
1920
720
×
×
×
×
480p
720p
1080i
480i
4
(1)
(4) (5) (6) (1)
5
6, 7 (NTSC)
16
(1)
1920 × 1080p
(1) (2) (3)
17, 18
19
720
1280
1920
×
×
×
×
576p
720p
1080i
576i
(1)
(1)
20
(4) (5) (6) (1)
21, 22 (PAL) 720
31
(1)
001aag258
1920 × 1080p
All upscaling modes are available only for YCBCR 4 : 2 : 2 input format.
(1) Pass through
(2) Upscaling
(3) Upscaling and interlacing
(4) Deinterlacing
(5) Deinterlacing and upscaling
(6) Deinterlacing, upscaling and interlacing
Fig 1. Input and output video scaler
2. Features
I 3 × 8-bit video data input bus, CMOS and LV-TTL compatible
I Horizontal synchronization, vertical synchronization and Data Enable (DE) inputs or
VREF, HREF and FREF could be used for input data synchronization
I Pixel rate clock input can be made active on one or both edges (selectable by I2C-bus)
I The TDA9983A has 4 I2S-bus audio input channels and 1 S/PDIF channel; audio
sampling rate up to 192 kHz
I 250 MHz to 1.50 GHz HDMI transmitter operation
I Programmable input formatter and upsampler/interpolator allows input of any of the
4 : 4 : 4, 4 : 2 : 2 semi-planar, 4 : 2 : 2 ITU656 and ITU656-like formats
I Programmable color space converter:
N RGB to YCBCR
N YCBCR to RGB
TDA9983A_SDS_1
© NXP B.V. 2008. All rights reserved.
Product short data sheet
Rev. 01 — 13 March 2008
2 of 9
TDA9983A
NXP Semiconductors
150 MHz pixel rate HDMI transmitter
I The upscaler enables a 720p/1080i output from a standard definition input using
intelligent edge interpolation
I Deals with multiple levels of HDCP receivers and repeaters
I Internal SHA-1 calculation
I Controllable via I2C-bus
I Low power dissipation
I 1.8 V and 3.3 V power supplies
I Power-down mode
I Hard reset
3. Applications
I DVD players and recorders
I Set-Top Box (STB)
I AV receivers and amplifiers (repeater)
I Camcorders
I Digital still cameras
I Media players
I PVRs
I Media centers PCs, graphics add-in boards, notebook PCs
I Switches
4. Quick reference data
Table 1.
VDDA(FRO_3V3) = 3.0 V to 3.6 V; VDDA(PLL_3V3) = 3.0 V to 3.6 V; VDDH(3V3) = 3.0 V to 3.6 V;
DDD(3V3) = 3.0 V to 3.6 V; VDDC(1V8) = 1.65 V to 1.95 V; VPP = 0 V; Tamb = 0 °C to 70 °C.
Typical values are measured at VDDA(FRO_3V3) = VDDA(PLL_3V3) = VDDH(3V3) = VDDD(3V3) = 3.3 V;
DDC(1V8) = 1.8 V; VPP = 0 V and Tamb = 25 °C; unless otherwise specified.
Quick reference data
V
V
Symbol
Parameter
Conditions
Min
Typ
Max Unit
TDA9983AHW/8 and TDA9983AHW/15
VDDA(FRO_3V3) free running oscillator 3.3 V
analog supply voltage
3.0
3.0
3.3
3.3
3.6
3.6
V
V
VDDA(PLL_3V3) PLL 3.3 V analog supply
voltage
VDDD(3V3)
VDDH(3V3)
VDDC(1V8)
Tamb
digital supply voltage (3.3 V)
HDMI supply voltage (3.3 V)
core supply voltage (1.8 V)
ambient temperature
3.0
3.0
3.3
3.3
3.6
3.6
1.95
70
V
V
1.65 1.8
V
0
-
°C
TDA9983AHW/8; up to 81 MHz
fclk(max) maximum clock frequency
Pcons
[1][2]
[1]
81
-
-
-
MHz
mW
mW
mW
mW
power consumption
329
343
463
477
-
[2]
worst case
worst case
-
512
-
[1]
Ptot
total power dissipation
-
[2]
-
661
TDA9983A_SDS_1
© NXP B.V. 2008. All rights reserved.
Product short data sheet
Rev. 01 — 13 March 2008
3 of 9
TDA9983A
NXP Semiconductors
150 MHz pixel rate HDMI transmitter
Table 1.
VDDA(FRO_3V3) = 3.0 V to 3.6 V; VDDA(PLL_3V3) = 3.0 V to 3.6 V; VDDH(3V3) = 3.0 V to 3.6 V;
DDD(3V3) = 3.0 V to 3.6 V; VDDC(1V8) = 1.65 V to 1.95 V; VPP = 0 V; Tamb = 0 °C to 70 °C.
Typical values are measured at VDDA(FRO_3V3) = VDDA(PLL_3V3) = VDDH(3V3) = VDDD(3V3) = 3.3 V;
DDC(1V8) = 1.8 V; VPP = 0 V and Tamb = 25 °C; unless otherwise specified.
Quick reference data …continued
V
V
Symbol
Ppd
Parameter
Conditions
Min
Typ
Max Unit
power dissipation in
power-down mode
-
13.5 38.4 mW
TDA9983AHW/15; up to 150 MHz
[3]
[3]
[3]
fclk(max)
Pcons
Ptot
maximum clock frequency
150
-
-
MHz
mW
mW
power consumption
-
-
-
361
495
583
732
total power dissipation
Ppd
power dissipation in
power-down mode
13.5 38.4 mW
[1] Video format:
a) Input 480p (ITU656 embedded sync, rising edge)
b) Output 1080i (YCBCR 4 : 2 : 2)
[2] Worst case video format:
a) Input 480p (YCBCR 4 : 2 : 2 semi-planar)
b) Output 720p (YCBCR 4 : 2 : 2)
[3] Video format:
a) Input 1080p (RGB 4 : 4 : 4 external sync, rising edge)
b) Output 1080p (RGB 4 : 4 : 4)
5. Ordering information
Table 2.
Ordering information
Type number
Package
Name
Description
Version
TDA9983AHW HTQFP80 plastic thermal enhanced thin quad flat package;
SOT841-4
80 leads; body 12 × 12 × 1 mm; exposed die pad
5.1 Ordering options
Table 3.
Survey of type numbers
Extended type number
Sampling frequency
(Msample/s)
Application
TDA9983AHW/8/C1xx
TDA9983AHW/15/C1xx
81
customer specific version
customer specific version
150
TDA9983A_SDS_1
© NXP B.V. 2008. All rights reserved.
Product short data sheet
Rev. 01 — 13 March 2008
4 of 9
xxxx xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx x xxxxxxxxxxxxxx xxxxxxxxxx xxx xxxxxx xxxxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxxxxxxxxxxxxx
xxxxx xxxxxx xx xxxxxxxxxxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxx xxxxxxx xxxxxxxxxxxxxxxxxxx
xxxxxxxxxxxxxxxx xxxxxxxxxxxxxx xxxxxx xx xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxxxxxxxxxxxxxxx xxxxxxx
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxx xxxxx x x
V
PP
V
V
DDC(1V8)
DDH(3V3)
V
DDA(PLL_3V3)
V
V
I2C_SCL I2C_SDA
43 44
A0 A1
41 40
RST_N
42
DDD(3V3)
DDA(FRO_3V3)
3
13, 48,
71
16, 45, 23
59, 74
38
28, 34
20
19
DDC_SCL
DDC_SDA
2
I C-BUS
HPD
MANAGEMENT
18
DDC-BUS
HARD
RESET
HPD
SLAVE
4 to 11
12
AP7 to AP0
ACLK
17
AUDIO
PROCESSING
IRQ
GENERATION
INT
DATA
ISLAND
PACKET
INFORMATION
FRAMES AND
PACKETS
27
26
TXC+
OTP
MEMORY
KEYS
TXC−
68 to 70,
75 to 79
30
29
TX0+
VIDEO PROCESSING
RGB
VPA[7:0]
TX0−
57 and 58,
61 to 65,
67
HDMI
SERIALIZER
YC
C
R
4 : 4 : 4
33
32
B
TX1+
VPB[7:0]
VPC[7:0]
COLOR
SPACE
3 × 8-bit
DOWNSAMPLING
TX1−
49 to 56
FROM
4 : 4 : 4
TO
VIDEO
INPUT
PROCESSOR
CONVERTER
RGB TO YUV
YUV TO RGB
2
HDCP
(1)
36
35
VSYNC/VREF
HSYNC/HREF
DE/FREF
UPSCALER
UPSAMPLING
FROM
TX2+
1
(1)
4 : 2 : 2
(1)
TX2−
4 : 2 : 2
TO
(4 : 4 : 4)
80
66
DEINTERLACER
INTRAFIELD
(1)
(1)
4 : 4 : 4
VCLK
TDA9983A
YC
B
C
4 : 2 : 2
2 × 12-bit
R
ITU656 or ITU656-like
or 1 × 12-bit
14, 47,
15, 60,
25, 31,
72
73
37
22
39
46
21
24
001aaf280
V
SSD
V
SSC
V
V
V
SSH
V
TM
EXT_SWING
SSA(FRO_3V3)
SSA(PLL_3V3)
SSA(PLL_1V8)
(1) Block can be bypassed.
Fig 2. Block diagram
TDA9983A
NXP Semiconductors
150 MHz pixel rate HDMI transmitter
7. Limiting values
Table 4.
Limiting values
In accordance with the Absolute Maximum Rating System (IEC 60134).
Symbol Parameter
Conditions
Min
−0.5
−0.5
−0.5
−55
0
Max
+4.6
+2.5
+0.5
+150
70
Unit
V
VDD(3V3) supply voltage (3.3 V)
VDD(1V8) supply voltage (1.8 V)
V
∆VDD
Tstg
Tamb
Tj
supply voltage difference
storage temperature
V
°C
°C
°C
V
ambient temperature
junction temperature
-
125
Vesd
electrostatic discharge voltage
HBM
−1500 +1500
8. Application information
TMDS clock
reset
digital video
(up to 24 bits)
TMDS channel 0
TMDS channel 1
TMDS channel 2
hot plug detect
sync signals
MICROPROCESSOR
HDMI
RECEIVER/
REPEATER
HDMI
TDA9983A
MASTER
MPEG2
DECODER
2
audio, S/PDIF and I S-bus
IRQ
2
2
DDC (SCL and SDA)
I C-bus
I C-bus
MASTER
SLAVE
MASTER
SLAVE
E-EDID
HDMI SOURCE
SLAVE ADDRESS A0
CEC line
001aaf300
Fig 3. Transmitter connection with external world
9. Abbreviations
Table 5.
Acronym
CMOS
DDC
Abbreviations
Description
Complementary Metal-Oxide Semiconductor
Display Data Channel
DVI
Digital Visual Interface
HDCP
HBM
High-bandwidth Digital Content Protection
Human Body Model
HDMI
HPD
High-Definition Multimedia Interface
Hot Plug Detect
IRQ
Interrupt ReQuest
LV-TTL
OTP
Low-Voltage Transistor-Transistor Logic
One-Time Programmable
TDA9983A_SDS_1
© NXP B.V. 2008. All rights reserved.
Product short data sheet
Rev. 01 — 13 March 2008
6 of 9
TDA9983A
NXP Semiconductors
150 MHz pixel rate HDMI transmitter
Table 5.
Abbreviations …continued
Description
Acronym
RGB
Red, Green, Blue
SHA-1
S/PDIF
YCBCR
YUV
Secure Hash Algorithm 1
Sony/Philips Digital Interface
color space originally defined by the ITU-R BT.601
color space used by the NTSC and PAL systems
10. Revision history
Table 6.
Revision history
Document ID
Release date
Data sheet status
Change notice
Supersedes
TDA9983A_SDS_1
20080313
Product short data sheet
-
-
TDA9983A_SDS_1
© NXP B.V. 2008. All rights reserved.
Product short data sheet
Rev. 01 — 13 March 2008
7 of 9
TDA9983A
NXP Semiconductors
150 MHz pixel rate HDMI transmitter
11. Legal information
11.1 Data sheet status
Document status[1][2]
Product status[3]
Development
Definition
Objective [short] data sheet
This document contains data from the objective specification for product development.
This document contains data from the preliminary specification.
This document contains the product specification.
Preliminary [short] data sheet Qualification
Product [short] data sheet Production
[1]
[2]
[3]
Please consult the most recently issued document before initiating or completing a design.
The term ‘short data sheet’ is explained in section “Definitions”.
The product status of device(s) described in this document may have changed since this document was published and may differ in case of multiple devices. The latest product status
information is available on the Internet at URL http://www.nxp.com.
damage. NXP Semiconductors accepts no liability for inclusion and/or use of
NXP Semiconductors products in such equipment or applications and
therefore such inclusion and/or use is at the customer’s own risk.
11.2 Definitions
Draft — The document is a draft version only. The content is still under
internal review and subject to formal approval, which may result in
modifications or additions. NXP Semiconductors does not give any
representations or warranties as to the accuracy or completeness of
information included herein and shall have no liability for the consequences of
use of such information.
Applications — Applications that are described herein for any of these
products are for illustrative purposes only. NXP Semiconductors makes no
representation or warranty that such applications will be suitable for the
specified use without further testing or modification.
Limiting values — Stress above one or more limiting values (as defined in
the Absolute Maximum Ratings System of IEC 60134) may cause permanent
damage to the device. Limiting values are stress ratings only and operation of
the device at these or any other conditions above those given in the
Characteristics sections of this document is not implied. Exposure to limiting
values for extended periods may affect device reliability.
Short data sheet — A short data sheet is an extract from a full data sheet
with the same product type number(s) and title. A short data sheet is intended
for quick reference only and should not be relied upon to contain detailed and
full information. For detailed and full information see the relevant full data
sheet, which is available on request via the local NXP Semiconductors sales
office. In case of any inconsistency or conflict with the short data sheet, the
full data sheet shall prevail.
Terms and conditions of sale — NXP Semiconductors products are sold
subject to the general terms and conditions of commercial sale, as published
at http://www.nxp.com/profile/terms, including those pertaining to warranty,
intellectual property rights infringement and limitation of liability, unless
explicitly otherwise agreed to in writing by NXP Semiconductors. In case of
any inconsistency or conflict between information in this document and such
terms and conditions, the latter will prevail.
11.3 Disclaimers
General — Information in this document is believed to be accurate and
reliable. However, NXP Semiconductors does not give any representations or
warranties, expressed or implied, as to the accuracy or completeness of such
information and shall have no liability for the consequences of use of such
information.
No offer to sell or license — Nothing in this document may be interpreted
or construed as an offer to sell products that is open for acceptance or the
grant, conveyance or implication of any license under any copyrights, patents
or other industrial or intellectual property rights.
Right to make changes — NXP Semiconductors reserves the right to make
changes to information published in this document, including without
limitation specifications and product descriptions, at any time and without
notice. This document supersedes and replaces all information supplied prior
to the publication hereof.
Quick reference data — The Quick reference data is an extract of the
product data given in the Limiting values and Characteristics sections of this
document, and as such is not complete, exhaustive or legally binding.
Suitability for use — NXP Semiconductors products are not designed,
authorized or warranted to be suitable for use in medical, military, aircraft,
space or life support equipment, nor in applications where failure or
malfunction of an NXP Semiconductors product can reasonably be expected
to result in personal injury, death or severe property or environmental
11.4 Trademarks
Notice: All referenced brands, product names, service names and trademarks
are the property of their respective owners.
I2C-bus — logo is a trademark of NXP B.V.
12. Contact information
For more information, please visit: http://www.nxp.com
For sales office addresses, please send an email to: salesaddresses@nxp.com
TDA9983A_SDS_1
© NXP B.V. 2008. All rights reserved.
Product short data sheet
Rev. 01 — 13 March 2008
8 of 9
TDA9983A
NXP Semiconductors
150 MHz pixel rate HDMI transmitter
13. Contents
1
General description . . . . . . . . . . . . . . . . . . . . . . 1
2
Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Quick reference data . . . . . . . . . . . . . . . . . . . . . 3
Ordering information. . . . . . . . . . . . . . . . . . . . . 4
Ordering options. . . . . . . . . . . . . . . . . . . . . . . . 4
Block diagram . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Limiting values. . . . . . . . . . . . . . . . . . . . . . . . . . 6
Application information. . . . . . . . . . . . . . . . . . . 6
Abbreviations. . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Revision history. . . . . . . . . . . . . . . . . . . . . . . . . 7
3
4
5
5.1
6
7
8
9
10
11
Legal information. . . . . . . . . . . . . . . . . . . . . . . . 8
Data sheet status . . . . . . . . . . . . . . . . . . . . . . . 8
Definitions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Disclaimers . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Trademarks. . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
11.1
11.2
11.3
11.4
12
13
Contact information. . . . . . . . . . . . . . . . . . . . . . 8
Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Please be aware that important notices concerning this document and the product(s)
described herein, have been included in section ‘Legal information’.
© NXP B.V. 2008.
All rights reserved.
For more information, please visit: http://www.nxp.com
For sales office addresses, please send an email to: salesaddresses@nxp.com
Date of release: 13 March 2008
Document identifier: TDA9983A_SDS_1
相关型号：
TDA9983AHW/8/C1XX
HDMI transmitter up to 150 MHz pixel rate with 3 ´ 8-bit video inputs and 4 ´ I2S-bus with S/PDIF
NXP
TDA9983AHW/C1,557
TDA9983A_SDS - HDMI transmitter up to 150 MHz pixel rate with 3 x 8-bit video inputs and 4 x I2S-bus with S/PDIF QFP 80-Pin
NXP
TDA9983B
HDMI transmitter up to 150 MHz pixel rate with 3 ´ 8-bit video inputs and 4 ´ I2S-bus with S/PDIF
NXP
TDA9983BHW
HDMI transmitter up to 150 MHz pixel rate with 3 ´ 8-bit video inputs and 4 ´ I2S-bus with S/PDIF
NXP
TDA9983BHW/15/C1
HDMI transmitter up to 150 MHz pixel rate with 3 ´ 8-bit video inputs and 4 ´ I2S-bus with S/PDIF
NXP
TDA9983BHW/15/C1,5
IC SPECIALTY CONSUMER CIRCUIT, PQFP80, 12 X 12 MM, 1 MM HEIGHT, PLASTIC, MS-026, SOT841-4, HTQFP-80, Consumer IC:Other
NXP
TDA9983BHW/15/C1:5
SPECIALTY CONSUMER CIRCUIT, PQFP80, 12 X 12 MM, 1 MM HEIGHT, PLASTIC, MS-026, SOT841-4, HTQFP-80
NXP
TDA9983BHW/15/C1;5
IC SPECIALTY CONSUMER CIRCUIT, PQFP80, 12 X 12 MM, 1 MM HEIGHT, PLASTIC, MS-026, SOT841-4, HTQFP-80, Consumer IC:Other
NXP
TDA9983BHW/8/C1
HDMI transmitter up to 150 MHz pixel rate with 3 ´ 8-bit video inputs and 4 ´ I2S-bus with S/PDIF
NXP
TDA9983BHW/8/C1,51
IC SPECIALTY CONSUMER CIRCUIT, PQFP80, 12 X 12 MM, 1 MM HEIGHT, PLASTIC, MS-026, SOT841-4, HTQFP-80, Consumer IC:Other
NXP
TDA9983BHW/8/C1,55
IC SPECIALTY CONSUMER CIRCUIT, PQFP80, 12 X 12 MM, 1 MM HEIGHT, PLASTIC, MS-026, SOT841-4, HTQFP-80, Consumer IC:Other
NXP
©2020 ICPDF网 联系我们和版权申明