0806437 [PHOENIX]
Computer Marking System Engraving System CMS-GRAV;
| 型号： | 0806437 |
| 厂家： | 
PHOENIX CONTACT |
| 描述： | Computer Marking System Engraving System CMS-GRAV |
| 文件： | 总11页 (文件大小：130K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
Computer Marking System
Engraving System CMS-GRAV
Description
The CMS-GRAV 32 is based on a three-axis coordinate
table with stepping motors and a ball screw free from
play. The multiprocessor-based control drives the three
axes and the tool changer.
The transparent safety cover allows optimum viewing of
the work area from all sides. This is one of the most
important elements of the comprehensive safety
features.
The CMS-GRAV 32 has a processing area (x,y,z) of
500 x 500 x 75 mm and a maximum clamping range
(x,y,z) of 850 x 750 x 150 mm.
The FF (fast frequency) spindle used has a capacity of
170 W and a max. torque of 60,000 rev/min.The special
clamping pliers of the spindle are designed for
processing tools with a shaft diameter of 3 mm.
A special tracing sleeve with the highly precise, spring-
loaded spindle block permits mechanical surface
scanning when slightly uneven workpieces are
engraved.This ensures a constant engraving depth.The
spring is automatically clamped during boring and
milling work.
During metalworking, the tools are cooled with the
coolant spraying device. Any chips that arise during the
processing of plastics are removed with the suction
device. This can be connected to a commercially
available industrial vacuum cleaner.
The tool magazine with its 10 tool holders makes the
CMS-GRAV 32 a fully automatic processing center
which can be used to produce even complicated
workpieces economically.
The precision end switch integrated in the tool magazine
permits the tool change to be monitored and the length
compensation data of the processing tools to be
transferred.
When surface scanning is used, the depth of the
engraving chisels is set with the adjusting device
included in delivery.
The scope of supply includes the serial connection
cable.
Phoenix Contact GmbH & Co. KG • 32823 Blomberg, Germany
Phone +49 52 35 3-00 • Fax +49 52 35 3-4 12 00 • www.phoenixcontact.com
Computer Marking System
Software CMS-MARK-WIN
Description
Professional labeling of systems and control cabinets is
becoming increasingly important. CMS-MARK-WIN 2.0
was developed specially for this task.
Use is made of the advantages of the powerful Windows
NT and Windows 95/98 operating systems.
The marking materials for terminal blocks, conductors,
cables and electrical equipment are labeled with the
labeling module. It is thus possible within just a brief
period, to import and then further process the ASCII-
format labeling as laid down in the CAD/CAE system
during project planning.
For entering data by hand, there are a host of convenient
functions, such as:
– enumeration,
– copy and duplication functions,
– input via variables.
The different marking materials to be labeled can be
changed or added to as desired. Special symbols for
electrical engineering are included as a standard and
can also be altered and added to.
CMS-MARK-WIN 2.0 also includes a comprehensive
graphics module. Using this CAD interface, all kinds of
All installed output devices are addressed parallel. It is
two-dimensional graphics can be created. For example possible to change to other Windows applications at any
to create:
time.
– nameplates,
– frontplates,
– mimic diagrams,
– marker engraving.
The individual objects and steps are generated as
graphics with the aid of a host of graphic functions.
Further special functions are also available:
– barcode,
– linear and circular scaling,
– marking panels on machines,
– circular inscription function,
– path correction with closed elements,
– symmetrical drilling patterns,
– import of graphics.
The entered drawings and graphics are displayed on the
screen in WYSIWYG real graphic form. This makes a
test print unnecessary.
CMS-MARK-WIN 2.0 allows labels to be printed, plot-
ted, cut, milled and drilled.The choice of devices for the
output of the projects is varied:
– CMS thermal transfer printer,
– Laser printer,
– Matrix printer,
– CMS plotter,
– CMS engraving machines.
Phoenix Contact page 2 of 11
CMS-GRAV...
Engraving/Milling system
CMS-GRAV...
Engraving / Milling system
2.Technical Data
Engraving/milling system CMS-GRAV 32
Pcs.
Pkt.
2.1 Description
Order No.
Type
Engraving/milling system,
incl. FF spindle, tool magazine, coolant spray device,
suction device and accessories
CMS-GRAV 32
50 67 42 0
1
Pcs.
Pkt.
Order No.
50 66 25 6
Type
2.2 Description accessories
Fixing rings,
for pre-adjustment of the processing tools
CMS-GRAV-WZ/ER
50
1
Tool magazine insert,
spare tool holder for the tool magazine
CMS-GRAV-WZ-ME/32
CMS-GRAV-SZ 3/32
CMS-GRAV-ZNH 15/32
50 67 43 3
50 67 44 6
50 67 45 9
Spare clamping pliers,
for tools with 3 mm shaft diameter
1
Tracing sleeves,
for mechanical surface scanning
1
2.3 General Data
Clamping area (X,Y,Z): 850 x 750 x 150 mm,
Processing range (X,Y,Z): 500 x 500 x 75 mm,
Operating voltage: 120/230 V AC 50/60 Hz, nominal current: 6 A/3 A
Phoenix Contact page 3 of 11
CMS-MARK...
Labeling / Engraving Software
CMS-MARK-WIN
Labeling / Engraving Software
3.Technical Data
Labeling / Engraving Software
Pcs.
Pkt.
3.1 Description
Order No.
Type
CMS-MARK-WIN software,
Version: German / English / Italian / French, for marking terminal
blocks, conductors, cables and electrical equipment on the plotter,
printer and engraving machine, including manual on CD
CMS-MARK- WIN
50 67 64 0
1
Pcs.
Pkt.
Order No.
50 67 97 0
Type
3.2 Description, Accessories
CMS-MARK-WIN-Demo software,
of the CMS-MARK-WIN labeling software
CMS-MARK-WIN-DEMO
1
1
1
1
CMS-MARK-WIN software license,
to authorize CMS-MARK-WIN-DEMO
CMS-MARK-WIN-SW-LIZENZ
CMS-MARK-WIN-UM
CMS-FONTS/WIN
50 67 67 9
50 67 63 7
50 67 70 5
CMS-MARK-WIN manual,
for the CMS-MARK-WIN labeling software, in German and English
CMS fonts,
for CMS-MARK-WIN software,
incl. description
3.3 General Data
Functionality
Input / storage of labeling data
Output of data (demo / full version)
Import of data from CAD/CAE systems
Material generator / special character generator
yes / yes
no / yes
yes
yes / yes
Minimum hardware requirements
CPU
min. Pentium 75
Main memory
Hard disk memory
Interfaces
CD-ROM drive / floppy drive
Monitor
Operating equipment
min. 16 MB / NT 4.0: min. 32 MB
min. 20 MB free
one per connected output device
yes / yes, IBM-compatible 1,44 MB
min. VGA with 640 x 480 resolution
keyboard, mouse recommended
Operating systems
MS-Windows® 95 / 98, MS-Windows® NT
Phoenix Contact page 4 of 11
CMS-GT...
CMS Processing Tools
CMS Processing Tools
The CMS processing tools are designed for light
engraving, milling and boring work. They are made of
fully hardened metal and have an excellent tool life with
consistently clean processing results. The shaft
diameter is 3 mm.
All tools cut to the right and have a spiral groove.
Milling cutter, CMS-GTM
The two cutting edges have a specially shaped cut at the
front. The milling cutters are suitable for processing
aluminum, printed circuit boards and plastics.
Drills, CMS-GTD
The drills are designed for processing printed circuit
boards, aluminum and non-ferrous metals.
Chisels, CMS-GTG
Because of their specially shaped cut, the chisels are
especially suited to engraving plastics, printed circuit
boards and aluminum.
CMS-GT...
Milling Cutter, Drills, Chisels
4. Technical Data
CMS Processing Tools
4.1 Description
Pcs.
Pkt.
Order No.
Type
Fully hardened steel cutter,
2 cutting edges,
milling width 0.4 mm
milling width 1.0 mm
milling width 2.0 mm
milling width 3.0 mm
CMS-GTM 0,4
CMS-GTM 1,0
CMS-GTM 2,0
CMS-GTM 3,0
50 66 74 8
50 66 75 1
50 61 66 2
50 66 77 7
10
10
10
10
Milling cutter assortment,
consists of 2 x CMS-GTM 0,4 to CMS-GTM 3,0
CMS-GTM-SORTI
50 68 03 4
1
Fully hardened steel drill,
drill diameter 0.6 mm
drill diameter 0.8 mm
drill diameter 0.9 mm
drill diameter 1.0 mm
drill diameter 1.3 mm
drill diameter 1.4 mm
drill diameter 2.0 mm
drill diameter 3.0 mm
CMS-GTD 0,6
CMS-GTD 0,8
CMS-GTD 0,9
CMS-GTD 1,0
CMS-GTD 1,3
CMS-GTD 1,4
CMS-GTD 2,0
CMS-GTD 3,0
50 66 78 0
08 03 79 9
50 66 80 3
50 66 81 6
50 66 72 2
50 66 83 2
50 66 84 5
50 66 85 8
10
10
10
10
10
10
10
10
Drill assortment,
consists of 1 x CMS-GTD 0,6 to CMS-GTD 3,0
CMS-GTD-SORTI
50 66 86 1
1
Fully hardened steel chisel,
1 cutting edge,
cutting width 0.1 mm
cutting width 0.3 mm
cutting width 0.5 mm
cutting width 0.75 mm
cutting width 1.0 mm
cutting width 1.5 mm
cutting width 3.0 mm
CMS-GTG 0,1
CMS-GTG 0,3
CMS-GTG 0,5
CMS-GTG 0,75
CMS-GTG 1,0
CMS-GTG 1,5
CMS-GTG 3,0
50 66 53 1
50 61 86 6
50 66 54 4
50 66 55 7
50 61 87 9
50 61 88 2
50 66 56 0
10
10
10
10
10
10
10
Chisel assortment,
consists of 1 x CMS-GTG 0,1 to CMS-GTG 3,0
CMS-GTG-SORTI
50 66 87 4
1
Phoenix Contact page 5 of 11
CMS-GT...
CMS Processing Tools
CMS-GT...
Milling Cutter, Drills, Chisels
4.Technical Data
CMS Processing Tools
4.2 General Data
Dimensions
Length
Shaft diameter
Material
[mm]
[mm]
38 (30 mm CMS-GTG)
3
hardened steel
3 mm
3 mm
3 mm
l
2
l
2
d
d
1
d
1
d1
l2
d1
l2
d
Typ
Type
Type
[mm] [mm]
[mm] [mm]
[mm]
CMS-GTM 0,4
CMS-GTM 1,0
CMS-GTM 2,0
CMS-GTM 3,0
0.4
1.0
2.0
3.0
3.0
5.0
CMS-GTD 0,6
CMS-GTD 0,8
CMS-GTD 0,9
CMS-GTD 1,0
CMS-GTD 1,3
CMS-GTD 1,4
CMS-GTD 2,0
CMS-GTD 3,0
0.6
0.8
0.9
1.0
1.3
1.4
2.0
3.0
7.0
8.0
CMS-GTG 0,1
CMS-GTG 0,3
CMS-GTG 0,5
0.1
0.3
0.5
9.0
9.0
12.0
10.5
10.5
10.5
10.5
10.5
CMS-GTG 0,75 0.75
CMS-GTG 1,0
CMS-GTG 1,5
CMS-GTG 3,0
1.0
1.5
3.0
Phoenix Contact page 6 of 11
CMS-VAC...
CMS Vacuum Plates
CMS Vacuum Plates
The vacuum plates are used to fasten markers and
plates of all processing sizes onto the engraving/milling
machine reliably and quickly.
Rubber mats are used to achieve an absolutely rigid
attachment of the engraving material to be processed.
The vacuum plate itself is fastened onto the engraving/
milling machine with three quick-change clamps. Three
fittings on the side allow the engraving material to be
aligned at a right angle.
CMS-VAC...
Vacuum Plates
5.Technical Data
CMS Vacuum Plates
Pcs.
Pkt.
5.1 Description
Order No.
50 61 80 8
Type
Vacuum unit, incl. rubber mat,
clamping area:
CMS-VAC-PL 1
1
1
1
1
1
1
250 x 150 x 28 mm
Vacuum unit, incl. rubber mat,
as above, however, clamping area:
280 x 300 x 28 mm
CMS-VAC-PL 2
CMS-VAC-PL 3
CMS-VAC-GHM 1
CMS-VAC-GHM 2
CMS-VAC-GHM 3
50 61 81 1
50 66 52 8
50 66 02 3
50 66 01 0
50 66 57 3
Vacuum unit, incl. rubber mat,
as above, however, clamping area:
500 x 500 x 28 mm
Rubber mat,
for vacuum plate CMS-VAC-PL 1
Rubber mat,
for vacuum plate CMS-VAC-PL 2
Rubber mat,
for vacuum plate CMS-VAC-PL 3
Self-adhesive film,
for vacuum plate CMS-VAC-PL 1
for vacuum plate CMS-VAC-PL 2
CMS-VAC-F1
CMS-VAC-F2
50 66 05 2
50 66 06 5
10
10
Phoenix Contact page 7 of 11
CMS-VAC...
CMS Vacuum Aggregate
CMS Vacuum Aggregate
CMS-VAC-W5
Vacuum Aggregate
6.Technical Data
CMS Vacuum Aggregate
Pcs.
Pkt.
6.1 Description
Order No.
50 66 61 2
Type
Vacuum aggregate,
intake capacity: 7.4 m3/h, motor capacity: 0.37 kW,
operating voltage: 230 V AC/50Hz
CMS-VAC-W5
1
Phoenix Contact page 8 of 11
GPK...
Double Layer Engraving Material
Double Layer Engraving Material
The engraving material, GPK is a special double layer
plastic for interior use. It has excellent engraving
properties.
The material has a matt, non-reflecting surface with an
extremely thin upper layer. This gives it the following
advantages with regard to engraving:
– short processing time,
– higher tool life.
The plates are available in a variety of thicknesses and
colors. The GPK/SK plates are finished with a high-
grade adhesive foil which guarantees good adhesive
properties on almost all surfaces.
GPK...
Engraving material
7. Technical Data
Double Layer Engraving Material
Pcs.
Order No.
7.1 Description
Type
Pkt.
Engraving plates,
L x W x H [mm]
300 x 280 x 0.8
Surface Engraving
as required
Material thickn. 0.8 mm
GPK 300 x 280 x 0,8 ...
08 06 06 8
10
Engraving plates,
L x W x H [mm]
Surface Engraving
Material thickn. 1.5 mm
300 x 280 x 1.5
300 x 280 x 1.5
white
black
as required
GPK 300 x 280 x 1,5 WH/BK
GPK 300 x 280 x 1,5 ...
50 31 91 9
08 06 12 3
10
10
Engraving plates,
L x W x H [mm]
Surface Engraving
Material thickn. 1.5 mm
610 x 610 x 1.5
610 x 610 x 1.5
white
black
as required
GPK 610 x 610 x 1,5 WH/BK
GPK 610 x 610 x 1,5 ...
08 06 35 6
08 06 42 4
10
10
Ordering example: Engraving plates GPK
For 30 GPK 610 x 610 x 1,5... in white / red color (WH/RD),
the order data is as follows:
Pcs.
30
Order No.
08 06 42 4
Designation
GPK 610 x 610 x 1,5 WH/RD
Phoenix Contact page 9 of 11
GPK/SK...
Double Layer Engraving Material
GPK/SK...
Engraving Material, self-adhesive
7.Technical Data
Double Layer Engraving Material, self-adhesive
Pcs.
Order No.
7.2 Description
Type
Pkt.
Engraving plates,
L x W x H [mm]
Surface Engraving
Material thickn. 0.8 mm
self-adhesive
300 x 280 x 0.8
300 x 280 x 0.8
300 x 280 x 0.8
300 x 280 x 0.8
silver
white
yellow
black
black
black
GPK/SK 300 x 280 x 0,8 SR/BK
GPK/SK 300 x 280 x 0,8 WH/BK
GPK/SK 300 x 280 x 0,8YE/BK
GPK/SK 300 x 280 x 0,8 ...
08 03 84 1
08 03 85 4
08 06 17 8
08 06 19 4
10
10
10
10
as required
Engraving plates,
L x W x H [mm]
300 x 280 x 1.5
Surface Engraving
as required
Material thickn. 1.5 mm
GPK/SK 300 x 280 x 1,5 ...
08 06 28 8
10
Engraving plates,
L x W x H [mm]
Surface Engraving
Material thickn. 0.8 mm
self-adhesive
610 x 610 x 0.8
610 x 610 x 0.8
610 x 610 x 0.8
silver
white
black
black
as required
GPK/SK 610 x 610 x 0,8 SR/BK
GPK/SK 610 x 610 x 0,8 WH/BK
GPK/SK 610 x 610 x 0,8 ...
08 06 48 2
08 06 43 7
08 06 50 5
10
10
10
Engraving plates,
L x W x H [mm]
Surface Engraving
Material thickn. 1.5 mm
self-adhesive
610 x 610 x 1.5
610 x 610 x 1.5
610 x 610 x 1.5
silver
white
black
black
as required
GPK/SK 610 x 610 x 1,5 SR/BK
GPK/SK 610 x 610 x 1,5 WH/BK
GPK/SK 610 x 610 x 1,5 ...
08 06 56 3
08 06 51 8
08 06 58 9
10
10
10
Ordering example:
Engraving plates GPK / SK
For 50 GPK / SK 610 x 610 x 0,8... in blue / white color (BU/WH),
the order data is as follows:
Pcs.
50
Order No.
08 06 50 5
Designation
GPK/SK 610 x 610 x 0,8 BU/WH
Phoenix Contact page 10 of 11
GPK... / GPK/SK...
Double Layer Engraving Material
GPK... / GPK/SK...
Engraving Material
7.Technical Data
Double Layer Engraving Material
7.3 General Data
Material
ABS
Temperatur range
Color
[°C]
– 20 to + 85
see description
Phoenix Contact page 11 of 11
相关型号：
0806SQ-12NGLB
General Purpose Inductor, 0.0123uH, 2%, 1 Element, Air-Core, SMD, 0807, ROHS COMPLIANT
COILCRAFT
©2020 ICPDF网 联系我们和版权申明