1708542 [PHOENIX]

Barrier Strip Terminal Block,;
1708542
型号: 1708542
厂家: PHOENIX CONTACT    PHOENIX CONTACT
描述:

Barrier Strip Terminal Block,

端子和端子排
文件: 总6页 (文件大小:115K)
中文:  中文翻译
下载:  下载PDF数据表文档文件
https://www.phoenixcontact.com/in/products/1708542  
MKDSN 1,5/ 4-5,08 BD:14-17 - 1708542  
Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's  
documentation. Our General Terms of Use for Downloads are valid  
(http://phoenixcontact.com/download)  
PCB terminal block, nominal current: 13.5 A, nom. voltage: 400 V, pitch: 5.08 mm, number of positions:  
4, connection method: Screw connection with tension sleeve, mounting: Wave soldering, conductor/PCB  
connection direction: 0 °, color: green  
The figure shows a 10-position  
version of the product  
Your advantages  
Well-known connection principle allows worldwide use  
Low temperature rise, thanks to maximum contact force  
Allows connection of two conductors  
Extremely small design for the respective conductor cross section  
The latching on the side enables various numbers of positions to be combined  
Key Commercial Data  
Packing unit  
1
GTIN  
GTIN  
4055626006727  
85369010  
Custom tariff number  
Technical data  
Item properties  
Brief article description  
Range of articles  
Pitch  
PCB terminal block  
MKDSN 1,5  
5.08 mm  
Number of positions  
Connection method  
Drive form screw head  
Screw thread  
4
Screw connection with tension sleeve  
Slotted (L)  
M3  
Mounting type  
Wave soldering  
Linear pinning  
Pin layout  
01/13/2019 Page 1 / 6  
https://www.phoenixcontact.com/in/products/1708542  
MKDSN 1,5/ 4-5,08 BD:14-17 - 1708542  
Technical data  
Item properties  
Number of levels  
1
Electrical parameters  
Rated current  
13.5 A  
400 V  
4 kV  
Rated insulation voltage (III/2)  
Rated surge voltage (III/2)  
Connection capacity  
Conductor cross section solid  
0.14 mm² ... 1.5 mm²  
0.14 mm² ... 1.5 mm²  
26 ... 16  
Conductor cross section flexible  
Conductor cross section AWG / kcmil  
Conductor cross section flexible, with ferrule without plastic sleeve  
Conductor cross section, flexible, with ferrule, with plastic sleeve  
2 conductors with same cross section, solid  
2 conductors with same cross section, flexible  
0.25 mm² ... 1 mm²  
0.25 mm² ... 1.5 mm²  
0.14 mm² ... 0.75 mm²  
0.14 mm² ... 0.75 mm²  
2 conductors with same cross section, stranded, ferrules without plastic  
sleeve  
0.25 mm² ... 0.5 mm²  
0.5 mm² ... 0.75 mm²  
2 conductors with same cross section, stranded, with TWIN ferrules with  
plastic sleeve  
Stripping length  
Torque  
6 mm  
0.5 Nm ... 0.6 Nm  
Material data - contact  
WEEE/RoHS-compliant, free of whiskers according to IEC 60068-2-82/  
JEDEC JESD 201  
Note  
Contact material  
Cu alloy  
Surface characteristics  
Tin-plated  
Metal surface terminal point (top layer)  
Metal surface terminal point (middle layer)  
Metal surface soldering area (top layer)  
Metal surface soldering area (middle layer)  
Tin (3 - 5 µm Sn)  
Nickel (1.3 - 3 µm Ni)  
Tin (3 - 5 µm Sn)  
Nickel (1.3 - 3 µm Ni)  
Material data - housing  
Insulating material  
PA  
Insulating material group  
I
CTI according to IEC 60112  
600  
V0  
Flammability rating according to UL 94  
Glow wire flammability index GWFI according to EN 60695-2-12  
Glow wire ignition temperature GWIT according to EN 60695-2-13  
Temperature for the ball pressure test according to EN 60695-10-2  
850  
775  
125 °C  
Dimensions for the product  
Schematic representation – for additional information, see product range  
drawing in the Download Center  
Caption  
Length [ l ]  
8.1 mm  
01/13/2019 Page 2 / 6  
https://www.phoenixcontact.com/in/products/1708542  
MKDSN 1,5/ 4-5,08 BD:14-17 - 1708542  
Technical data  
Dimensions for the product  
Width [ w ]  
20.32 mm  
Height [ h ]  
13.5 mm  
5.08 mm  
10 mm  
Pitch  
Height (without solder pin)  
Solder pin [P]  
Pin dimensions  
Dimension a  
3.5 mm  
0.5 x 1 mm  
15.24 mm  
Dimensions for PCB design  
Hole diameter  
1.3 mm  
Packaging information  
Type of packaging  
packed in cardboard  
Pieces per package  
50  
Denomination packing units  
Pcs.  
General product information  
Type of note  
Note on application  
For safe conductor connection, always adhere to a defined tightening  
torque. Particularly in the case of PCB terminal blocks with two or  
three positions, the individual solder pin for each contact point cannot  
compensate for this. That is why the terminal blocks must be supported  
during conductor connection (held with one hand, support on the  
housing).  
Note  
Ambient conditions  
Ambient temperature (storage/transport)  
Ambient temperature (assembly)  
Ambient temperature (operation)  
-40 °C ... 70 °C  
-5 °C ... 100 °C  
-40 °C  
Termination and connection method  
Connection test  
IEC 60998-2-2:2002-12  
Pull-out test  
Pull-out test  
IEC 60998-2-1:2002-12  
Test passed  
Conductor cross section / conductor type / tensile force  
0.14 mm² / solid / > 10 N  
0.14 mm² / flexible / > 10 N  
1.5 mm² / solid / > 40 N  
1.5 mm² / flexible / > 40 N  
Mechanical tests according to standard  
Test specification  
IEC 60998-2-1 (in parts)  
Electrical tests  
Rated current  
13.5 A  
400 V  
Rated insulation voltage (III/2)  
01/13/2019 Page 3 / 6  
https://www.phoenixcontact.com/in/products/1708542  
MKDSN 1,5/ 4-5,08 BD:14-17 - 1708542  
Technical data  
Electrical tests  
Rated surge voltage (III/2)  
4 kV  
Air clearances and creepage distances  
Insulating material group  
Voltage  
I
250 V  
250 V  
400 V  
630 V  
4 kV  
4 kV  
4 kV  
Rated insulation voltage (III/3)  
Rated insulation voltage (III/2)  
Rated insulation voltage (II/2)  
Rated surge voltage (III/3)  
Rated surge voltage (III/2)  
Rated surge voltage (II/2)  
Current carrying capacity / derating curves  
Specification  
IEC 60998-2-1 (in parts)  
Vibration test  
Resistance to ageing, to humidity conditions, to ingress of solid objects  
and to harmful ingress of water  
Test passed IEC 60998-1:2002-12 168 h/100°C 48 h/30 °C/92 %  
Test result  
Test passed  
Test specification  
Dry heat  
IEC 60998-1:2002-12  
168 h/100°C  
Humid heat  
48 h/30 °C/92 %  
Resistance to ageing, humidity and penetration of solids  
Test result  
Test passed  
Test specification  
Dry heat  
IEC 60998-1:2002-12  
168 h/100°C  
Humid heat  
48 h/30 °C/92 %  
Standards and Regulations  
Connection in acc. with standard  
EN-VDE  
Environmental Product Compliance  
REACh SVHC  
China RoHS  
Lead 7439-92-1  
Environmentally Friendly Use Period = 50  
For details about hazardous substances go to tab “Downloads”,  
Category “Manufacturer's declaration”  
Classifications  
eCl@ss  
eCl@ss 5.1  
eCl@ss 6.0  
eCl@ss 7.0  
eCl@ss 8.0  
27261100  
27261100  
27440401  
27440401  
01/13/2019 Page 4 / 6  
https://www.phoenixcontact.com/in/products/1708542  
MKDSN 1,5/ 4-5,08 BD:14-17 - 1708542  
Classifications  
eCl@ss  
eCl@ss 9.0  
27440401  
ETIM  
ETIM 5.0  
ETIM 6.0  
EC002643  
EC002643  
UNSPSC  
UNSPSC 13.2  
Approvals  
39121432  
Approvals  
Approvals  
DNV GL / CSA / IECEE CB Scheme / SEV / EAC / cULus Recognized  
Ex Approvals  
Approval details  
DNV GL  
http://exchange.dnv.com/tari/  
TAE00001EV  
CSA  
http://www.csagroup.org/services-industries/product-listing/  
13631  
D
B
Nominal voltage UN  
Nominal current IN  
mm²/AWG/kcmil  
300 V  
10 A  
28-14  
150 V  
10 A  
28-14  
IECEE CB Scheme  
http://www.iecee.org/  
CH-8225  
Nominal voltage UN  
Nominal current IN  
mm²/AWG/kcmil  
250 V  
13.5 A  
1.5  
01/13/2019 Page 5 / 6  
https://www.phoenixcontact.com/in/products/1708542  
MKDSN 1,5/ 4-5,08 BD:14-17 - 1708542  
Approvals  
SEV  
https://www.electrosuisse.ch/de/meta/shop/produktezertifikate.html  
IK-3542-M1  
Nominal voltage UN  
Nominal current IN  
mm²/AWG/kcmil  
250 V  
13.5 A  
1.5  
EAC  
B.01742  
cULus Recognized  
http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm E60425-19770427  
B
D
Nominal voltage UN  
Nominal current IN  
mm²/AWG/kcmil  
300 V  
10 A  
300 V  
10 A  
30-14  
30-14  
Phoenix Contact 2019 © - all rights reserved  
http://www.phoenixcontact.com  
01/13/2019 Page 6 / 6  

相关型号:

1708543

Barrier Strip Terminal Block, 41A, 1 Row(s), 1 Deck(s), ROHS COMPLIANT
PHOENIX

1708546

Barrier Strip Terminal Block,
PHOENIX

1708547

Barrier Strip Terminal Block,
PHOENIX

1708549

Barrier Strip Terminal Block,
PHOENIX

1708550

Barrier Strip Terminal Block,
PHOENIX

1708551

Barrier Strip Terminal Block,
PHOENIX

1708556

Base strip - IPC 5/ 8-GF-7,62
PHOENIX

1708557

Barrier Strip Terminal Block, 8A, 1 Row(s), 1 Deck(s)
PHOENIX

1708558

Strip Terminal Block,
PHOENIX

1708559

Barrier Strip Terminal Block,
PHOENIX

1708560

Barrier Strip Terminal Block, 12A, 2.5mm2, 1 Row(s), 1 Deck(s)
PHOENIX

1708561

TERM BLOCK HDR 4POS VERT 5MM
PHOENIX