2903320 [PHOENIX]
Relay Module - RIF-2-RSC-LDP-24DC/4X21;
| 型号： | 2903320 |
| 厂家： | 
PHOENIX CONTACT |
| 描述： | Relay Module - RIF-2-RSC-LDP-24DC/4X21 继电器 |
| 文件： | 总6页 (文件大小：128K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
https://www.phoenixcontact.com/pi/products/2903343
Relay Module - RIF-1-RSC-LV-230AC/2X21AU - 2903343
Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's
documentation. Our General Terms of Use for Downloads are valid
(http://phoenixcontact.com/download)
Pre-assembled relay module with screw connection, consisting of: relay base, multi-layer contact relay, plug-
in display/interference suppression module, and retaining bracket. Contact type: 2 changeover contacts. Input
voltage: 230 V AC
Key Commercial Data
Packing unit
10 pc
GTIN
GTIN
4046356732116
Technical data
Note
EMC: class A product, see manufacturer's declaration in the download
area
Utilization restriction
Dimensions
Width
Height
Depth
16 mm
89 mm
75 mm
Ambient conditions
Ambient temperature (operation)
-40 °C ... 50 °C
-40 °C ... 85 °C
Ambient temperature (storage/transport)
Coil side
Nominal input voltage UN
Input voltage range in reference to UN
Mains frequency
230 V AC
see diagram
50/60 Hz
Typical input current at UN
Typical response time
6 mA
3 ms ... 12 ms
3 ms ... 20 ms
Typical release time range
03/19/2019 Page 1 / 6
https://www.phoenixcontact.com/pi/products/2903343
Relay Module - RIF-1-RSC-LV-230AC/2X21AU - 2903343
Technical data
Coil side
Coil voltage
230 V AC
Varistor
Protective circuit
Operating voltage display
Yellow LED
Contact side
Contact type
2 PDT
Type of switch contact
Contact material
Single contact
AgNi, hard gold-plated
30 V AC
Maximum switching voltage
36 V DC
Minimum switching voltage
Min. switching current
100 mV (at 10 mA)
1 mA (at 24 V)
50 mA
Maximum inrush current
Limiting continuous current
Interrupting rating (ohmic load) max.
50 mA
1.2 W (at 24 V DC)
Contact side (with destroyed gold layer)
Contact material
AgNi
Note
the following values are applicable if a gold layer is destroyed
250 V AC/DC
Maximum switching voltage
Minimum switching voltage
Limiting continuous current
Min. switching current
Interrupting rating (ohmic load) max.
5 V (at 10 mA)
12 A (20 ms, N/O contact)
10 mA (At 5 V)
192 W (at 24 V DC)
96 W (at 48 V DC)
60 W (at 60 V DC)
44 W (at 110 V DC)
57 W (at 220 V DC)
2000 VA (for 250 V AC)
2 A (at 24 V, DC13)
0.2 A (at 110 V, DC13)
0.2 A (at 250 V, DC13)
2 A (at 24 V, AC15)
2 A (at 120 V, AC15)
2 A (at 250 V, AC15)
Switching capacity
Connection data input side
Connection name
Coil side
Connection method
Screw connection
8 mm
Stripping length
Conductor cross section solid
0.5 mm² ... 4 mm²
0.5 mm² ... 2.5 mm²
Conductor cross-section solid (2 conductors with same cross section)
03/19/2019 Page 2 / 6
https://www.phoenixcontact.com/pi/products/2903343
Relay Module - RIF-1-RSC-LV-230AC/2X21AU - 2903343
Technical data
Connection data input side
Conductor cross section flexible
0.5 mm² ... 4 mm²
0.5 mm² ... 4 mm² (Ferrule with plastic sleeve)
Conductor cross section flexible (2 conductors with same cross section) 0.5 mm² ... 2.5 mm²
0.5 mm² ... 1.5 mm² (TWIN ferrule with plastic sleeve)
20 ... 10 (solid)
Conductor cross section AWG
20 ... 12 (flexible)
0.5 Nm ... 0.6 Nm
Torque
Connection data output side
Connection name
Contact side
Connection method
Screw connection
8 mm
Stripping length
Conductor cross section solid
Conductor cross-section solid (2 conductors with same cross section)
Conductor cross section flexible
0.5 mm² ... 4 mm²
0.5 mm² ... 2.5 mm²
0.5 mm² ... 4 mm²
0.5 mm² ... 4 mm² (Ferrule with plastic sleeve)
Conductor cross section flexible (2 conductors with same cross section) 0.5 mm² ... 2.5 mm²
0.5 mm² ... 1.5 mm² (TWIN ferrule with plastic sleeve)
20 ... 10 (solid)
Conductor cross section AWG
20 ... 12 (flexible)
0.5 Nm ... 0.6 Nm
Torque
General
Type of note
Notes on operation
FBS 2-6... plug-in bridge for the input side (A2) and FBS-2-8... plug-in
bridge for the output side (11/21)
Note
4 kVrms (50 Hz, 1 min.)
2.5 kVrms (50 Hz, 1 min.)
100% operating factor
IP20 (Relay base)
Test voltage relay winding/relay contact
Test voltage PDT/PDT
Operating mode
Degree of protection
RT III (Relay)
approx. 107 cycles
see diagram
any
Mechanical service life
Service life, electrical
Mounting position
Assembly instructions
Net weight (SAP)
In rows with zero spacing
69 g
Standards and Regulations
Standards/regulations
Rated surge voltage
DIN EN 50178
6 kV
Safe isolation, basic insulation, and 4 kV rated surge voltage between all
changeover contacts.
Insulation
Degree of pollution
2
03/19/2019 Page 3 / 6
https://www.phoenixcontact.com/pi/products/2903343
Relay Module - RIF-1-RSC-LV-230AC/2X21AU - 2903343
Technical data
Standards and Regulations
Overvoltage category
III
Flammability rating according to UL 94
V2
Environmental Product Compliance
China RoHS
Environmentally Friendly Use Period = 50
For details about hazardous substances go to tab “Downloads”,
Category “Manufacturer's declaration”
Drawings
Circuit diagram
Diagram
22
24
12
14
1,8
1,7
1,6
1,5
1,4
1,3
1,2
1,1
1,0
0,9
0,8
0,7
0,6
21
11
A2
A1
AC coils
20
30
40
50
60
70
80
Ambient temperature [°C]
DC coils
AC coils
Operating voltage range
Diagram
Diagram
11
10
20
10
9
8
7
6
5
4
3
2
1
6
4
1
2
1
4
2
3
0,5
0,3
0,2
0,1
10
20
30
50
70 100
200 300
20
30
40
50
60
70
80
Switching voltage [V]
Ambient temperature [°C]
1
AC, ohmic load
2
3
4
DC, ohmic load, contacts in series
DC, ohmic load
DC, L/R = 40 ms
DC coil
AC coil
Interrupting rating
Contact derating
03/19/2019 Page 4 / 6
https://www.phoenixcontact.com/pi/products/2903343
Relay Module - RIF-1-RSC-LV-230AC/2X21AU - 2903343
Diagram
Diagram
107
106
105
104
1
0,9
0,8
0,7
0,6
0,5
0,4
0,3
1
2
0
1
2
3
4
5
6
7
8
9
10 11 12 13 14 15 16
1
0,9
0,8
0,7
0,6
0,5
0,4
0,3
0,2
Switching current [A]
j
COS
1
2
250 V AC, ohmic load (DC coils)
250 V AC, ohmic load (AC coils)
Electrical service life
Service life reduction factor
Articles in set
Relay base - RIF-1-BSC/2X21 - 2900930
RIF-1... relay base, for miniature power relay with 1 or 2 changeover contacts or identical solid-state relays, screw
connection, plug-in option for input/interference suppression modules, for mounting on NS 35/7,5
Single relay - REL-MR-230AC/21-21AU - 2961480
Plug-in miniature power relay, with multi-layer gold contact, 2 PDTs, input voltage 230 V AC
Plug-in module - RIF-LV-120-230 AC/110 DC - 2900944
Plug-in module, for mounting on RIF-1, RIF-2, RIF-3, and RIF-4, with varistor and yellow LED, input voltage: 120 ...
230 V AC/110 V DC ±20 %
Retaining bracket - RIF-RH-1 - 2900953
Relay retaining bracket, with ejector function and holder for marking material, suitable for RIF-1 relay base, for 16 mm
tall miniature power relay and solid-state relay
03/19/2019 Page 5 / 6
https://www.phoenixcontact.com/pi/products/2903343
Relay Module - RIF-1-RSC-LV-230AC/2X21AU - 2903343
Articles in set
Approvals
Approvals
Approvals
DNV GL / EAC
Ex Approvals
Approval details
DNV GL
http://exchange.dnv.com/tari/
TAA000018V
RU C-
DE.A*30.B.01082
EAC
Phoenix Contact 2019 © - all rights reserved
http://www.phoenixcontact.com
PHOENIX CONTACT GmbH & Co. KG
Flachsmarktstr. 8
32825 Blomberg
Germany
Tel. +49 5235 300
Fax +49 5235 3 41200
http://www.phoenixcontact.com
03/19/2019 Page 6 / 6
相关型号：
©2020 ICPDF网 联系我们和版权申明