2964636 [PHOENIX]
Modular Terminal Block,;型号: | 2964636 |
厂家: | PHOENIX CONTACT |
描述: | Modular Terminal Block, 端子和端子排 |
文件: | 总3页 (文件大小:84K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Power Optocoupler Terminal Block up to 10 A
DEK-OV...
1. Brief Description
The Phoenix Contact Interface DEK terminals offer
complete interface functions in terminal block housings
with a width of only 6.2 mm (0.244 in.) These powerful
interfaces do not only share the design of the terminal
blocks but also their highly convenient application due
to the use of standard terminal accessories.
The DEK family offers the suitable solution for every
industrial voltage valuefor signal input as well as
output.
High switching power is a standard feature of DEK-
OV optocoupler terminals.
For applications with high switching frequency where
electro-mechanical relays rapidly reach the end of their
service life you can now apply the wear-resistant power
optocoupler DEK-OV terminal block.
Integrated LEDs clearly signal the switching state of
The key features of this power optocoupler include:
– Wear-resistant switching up to 24 V DC/10 A and
240 V AC/800 mA,
– Status display per LED,
– Galvanic isolation between input and
output 2,5 kV,
– integrated protective circuit at the output,
– Zero voltage switch at AC output,
– Assembly and labeling is the same as for terminal
blocks,
electronic terminal blocks and thus create a very good
overview of the coupling level and the system.
Due to colored EB-DIK jumpering, terminals for
supply and measuring signals the wiring is easy and
efficient.
Integrated protection circuits such as free-wheeling
diodes, diodes against polarity reversal and surge
voltage elements protect coupling components and
thus provide optimum system availability.
– Jumpering with the EB-DIK jumpers,
– Ambient temperature range – 20 °C (-40˚F) up to
+ 60 °C (140˚F),
Powerful Optocoupler Terminals
Powerful interface modules are required to switch
actuators and controlling devices such as contactors,
solenoid valves or motors directly using cost-efficient
digital output cards (low power, no galvanic isolation
but high-pos.).
– Also available as actuator type.
The Phoenix Contact DEK-OV interface terminals
offer a complete output interface based on terminal
blocks with a width of only 6.2 mm (0.244 in.).
Headquarters: © Phoenix Contact GmbH & Co. KG • Flachsmarktstraße 8 • 32825 Blomberg • Germany
Phone +49 - 52 35 - 3 00 • Fax +49 - 52 35 - 34 12 00 • www.phoenixcontact.com
Local contact: www.phoenixcontact.com/salesnetwork
Power optocoupler terminal blocks up to 10 A
2.Technical Data
DC output 3 A
A1+
14
13+
A2-
A2-
DC output 10 A
A1
A2
A
+
0
AC output
13
13
A1
A2
“…6“
80
14
DEK-OV...
Output up to 10 A max.
8
M 3
Terminal width 6.2 mm (0.244 in.)
solid
stranded
AWG
[mm2]
Connection data 0.2-2.5
0.2-2.5
24-14
Input
voltage
Pcs.
pkt.
Description
Type
Order No.
Power optocoupler terminal block,
Input: Common mode voltage
output: Common mode voltage
5 V DC
12 V DC
24 V DC
5 V DC
12 V DC
24 V DC
DEK-OV- 5DC/24DC/3
DEK-OV-12DC/24DC/3
DEK-OV-24DC/24DC/3
DEK-OV- 5DC/24DC/10
DEK-OV-12DC/24DC/10
DEK-OV-24DC/24DC/10
29 41 36 1
29 41 38 7
29 41 37 4
29 61 75 2
29 61 74 9
29 64 32 2
10
10
10
10
10
10
Power optocoupler terminal block, acutator
principle,
24 V DC
DEK-OV-24DC/24DC/3/AKT
29 64 29 6
10
Input: Common mode voltage
Output: Common mode voltage
Power optocoupler terminal block,
Input: Common mode voltage
output: AC voltage
5 V DC
12 V DC
24 V DC
DEK-OV- 5DC/240AC/800
DEK-OV-12DC/240AC/800
DEK-OV-24DC/240AC/800
29 64 62 3
29 64 63 6
29 64 64 9
10
10
10
(1) Insertion jumper1), for
average and lower level
Color: Red
2-pos.
3-pos.
4-pos.
5-pos.
10-pos.
EB 2-DIK RD
EB 3-DIK RD
EB 4-DIK RD
EB 5-DIK RD
EB 10-DIK RD
Imax: 26 A
26 A
27 16 69 3 100
27 16 74 5 100
27 16 75 8 100
27 16 76 1 100
Red
Red
Red
Red
26 A
26 A
26 A
27 16 77 4
10
blue
blue
blue
blue
blue
2-pos.
3-pos.
4-pos.
5-pos.
10-pos.
EB 2-DIK BU
EB 3-DIK BU
EB 4-DIK BU
EB 5-DIK BU
EB 10-DIK BU
26 A
26 A
26 A
26 A
26 A
27 16 64 8 100
27 16 65 1 100
27 16 66 4 100
27 16 67 7 100
27 16 68 0
10
blue
Red
white
80-pos.
80-pos.
80-pos.
EB 80-DIK BU
EB 80-DIK RD
EB 80-DIK WH
26 A
26 A
26 A
27 15 94 0
27 15 95 3
27 15 78 8
5
5
5
Can be disconnected
PHOENIX CONTACT page 2 from 3
Power Optocoupler Terminal Blocks up to 10 A – DEK-OV
Technical Data
Input data (Input)
DC 3 A
12
0.8 x UN
0.4 x UN
DC 10 A
AC
5
Operating voltage range [V DC] ± 20 %
Switching level1-signal ("H")
0-signal ("L")
Current at nominal voltage [mA]
Transmission frequency flimit [Hz] (ohmic load)
Input wiring
5
24
7
5
12
24
4
12
11
24
11
11
9
5
5
10
10
300
100
Operating indicator (LED yellow), protection against polarity reversal
(10 A and AC type surge voltage protection)
Output data (Output)
Operating voltage range
Periodical peak off-state voltage
Maximum continuous load current
Minimum load current
3… 30 V DC
–
5… 30 V DC
–
10-253 V AC, 50/60 Hz
600 V
3 A (see ’Derating’) 10 A (see ’Derating’) 0.8 A (see ’Derating’)
–
–
10 mA
Surge current
–
–
30 A (t =10 ms)
< 1 V
1.2 mA
Residual voltage at maximum load current
Leakage in the off-state
Max. phase shift (inductive load)
I2t value I2 x t (t = 10 ms)
Switching time ton/toff
Approx. 0.2 V
< 50 mV
–
–
–
–
–
–
cosϕ = 0.5
4.5 A2s
Approx. 40 µs/200 µs ca. 250 µs/800 µs
2-wire - floating 2-wire -
< 10 ms
2-wire - floating,
Output circuit
linked to the ground zero voltage switch
Output wiring
Protection against polarity reversal, surge voltage protectionRCV
wiring
General Data
Test voltage input/output
Ambient operating temperature range
Standards/specifications
2.5 kV AC, 50 Hz, 1 minute
- 20 °C to +60°C (-4˚F to +131˚F)
IEC 60 664/IEC 60 664 A/DIN VDE 0110,
Pollution degree 2, surge voltage protection category III
Any
can be connected without distance
Screw connection
Mounting position
Mounting
Connection type
1) Please observe the maximum current carrying capacity of the
jumper and the number of connected inputs and outputs.The supply
must only be provided directly at the insertion jumper.
2) other voltage values on request.
Load current independent of the ambient temperature for
DEK-OV-…/24DC/3 and DEK-OV-24DC/24DC/3/AKT,
Nominal operating mode 100 % ED
Load current depending on the ambient temperature for
DEK-OV-.../24DC/10
Nominal operating mode 100 % ED
1
10
9
3
2
8
2
7
1
6
5
4
3
2
1
0
10 20 30 40 50 60
Ambient temperature [°C]
1 Mounting, horizontal
2 Mounting, vertical
0
10
20
30
40
50
60
Ambient temperature [°C]
Load current independent of the ambient temperature for
DEK-OV-…/240AC/800,
Nominal operating mode 100 % ED
Note:
Types of insulating housings
Polyamid PA, not reinforced,
see INTERFACE catalog
Color: Green
0,8
0,6
0,4
Torque for terminal block screw see
INTERFACE catalog.
Marking system and assembly material see CLIPLINE catalog.
The dimensioning cross section (see INTERFACE catalog) is
meant for unstripped wires without ferrules.
0,2
0
10 20 30 40 50 60
Inductive loads must be limited to protect input and output with an
effective protective circuit.
Ambient temperature [°C]
Items printed in bold can be supplied at short notice!
PHOENIX CONTACT page 3 from 3
相关型号:
2966016
6.2 mm PLC basic terminal blocks with screw connection method, input voltage 24 V DC(without relay or optocoupler)
PHOENIX
©2020 ICPDF网 联系我们和版权申明