3038134 [PHOENIX]
Modular Terminal Block;型号: | 3038134 |
厂家: | PHOENIX CONTACT |
描述: | Modular Terminal Block 端子和端子排 |
文件: | 总5页 (文件大小:655K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Spring Cage Feeed Through Terminal Blocks
with Angled Design STS 6
The ST-DESK series of spring cage terminal blocks
features an angled conductor entry. This family of
compact terminal blocks is used especially in wiring
systems where space is to be saved using underfloor
wiring. With their dual jumper channel, STS 6 and
STS 6-TWIN offer a variety of options for potential
bridging. Moreover, these jumper channels are
conveniently positioned and are in the same location
2
as is the case for the 2.5 and 4 mm terminal blocks
of the ST-DESK series. Using adapter bridge
RB-ST 6-(4/2,5), the potential can be distributed both
to the left or right to the terminal blocks with smaller
nominal cross sections.
Phoenix Contact GmbH & Co. KG • 32823 Blomberg, Germany
Phone +49 52 35 3-00 • Fax +49 52 35 3-4 12 00 • www.phoenixcontact.com
Spring Cage
Feed Through Terminal Block
STS 6
(IEC)
[mm ]
rigid
solid
flexible
stranded
I
U
[V]
2
AWG [A]
IEC 60 947-7-1
0.2-10
0.2-6
24-8
52
800
Technical data
Pcs.
Pkt.
Type
OrderNo.
Spring cage terminal block,
for mounting on 3
gray terminal width 8.2
blue terminal width 8.2
STS 6
30 38 12 1
30 38 13 4
50
50
STS 6 BU
(1) End cover
gray
D-STS 6
30 38 18 9
50
(2) Plug-in bridge, for
cross-connections in the
terminal center
2-pos.
3-pos.
4-pos.
5-pos.
10-pos.
FBS 2-8
FBS 3-8
FBS 4-8
FBS 5-8
FBS 10-8
Imax.: 41 A
41 A
30 30 28 4
30 30 29 7
30 30 30 7
30 30 31 0
30 30 32 3
10
10
10
10
10
41 A
41 A
41 A
(3) Adapter bridge, for connecting an STS 6
to an STS 4 or STS 2,5
RB ST 6-(2,5/4)
Imax.: 48 A
30 30 86 0
10
(4) Partition plate, for
visual and electrical separation
of terminal groups, 2 mm thick
ATP-ST 6
PAI 4
30 24 48 1
30 30 92 5
50
10
(5) Test adapter, for 4 mm ∅ test plug PS
and 4 mm ∅ safety test plugs,
making contact in the bridge shaft
1
(6) 2.3 mm ∅ test plug ), consisting of
MPS-RD
PS 5
02 01 55 3
30 30 98 3
10
10
metal part and red insulating sleeve
(7) Modular test plug, can be labeled with ZBF 5
(8) Screwdriver, for
actuating the tension spring
SZF 2 - 0,8 x 4,0
12 04 52 0
10 52 00 2
10
10
(9) Zack strip, 10-section, for
labeling in the terminal center
white
ZB 8:UNPRINTED
Dimensions
Width / length / end cover width
[mm]
[mm]
8.2 / 58 / 2.2
Height (NS 35/7,5 / NS 35/15)
50.0 / 57.5
Technical data in accordance with IEC/ DIN VDE
Maximum // Rated data
[A] / [mm2]
[kV] / –
– / –
52 / 10 // 41 / 6
8 / 3
Rated surge voltage / contamination class
Surge voltage category / insulation material group
Connection capacity
Stranded with ferrule with plastic sleeve
Stranded with ferrule without plastic sleeve
Stranded with TWIN ferrule with plastic sleeve
Stripping length
III / I
[mm2]
[mm2]
[mm2]
[mm]
0.25 - 6
0.25 - 6
0.25 - 1.5
12
Internal cylindrical gauge (IEC 60 947-1)
Insulating material
A 5
PA
Inflammability class in acc. with UL 94
V0
Approval data (UL and CSA/CUL)
Nominal voltage / current / conductor sizes
UL: [V] / [A] / AWG
applied for
applied for
CSA/CUL: [V] / [A] / AWG
1) Further colors are available on request.
Phoenix Contact page 2 of 5
Spring Cage
Feed Through Terminal Block
STS 6-TWIN
(IEC)
[mm ]
rigid
solid
flexible
stranded
I
U
[V]
2
AWG [A]
IEC 60 947-7-1
0.2-10
0.2-6
24-8 52*
800
* The max. load current must not be exceeded by the total current of all connected
conductors.
Technical data
Pcs.
Pkt.
Type
OrderNo.
Spring cage terminal block,
for mounting on 3
gray terminal width 8.2
blue terminal width 8.2
STS 6-TWIN
30 38 15 0
30 38 16 3
50
50
STS 6-TWIN BU
(1) End cover
gray
D-STS 6-TWIN
30 38 20 2
50
(2) Plug-in bridge, for
cross-connections in the
terminal center
2-pos.
3-pos.
4-pos.
5-pos.
10-pos.
FBS 2-8
FBS 3-8
FBS 4-8
FBS 5-8
FBS 10-8
Imax.: 41 A
41 A
30 30 28 4
30 30 29 7
30 30 30 7
30 30 31 0
30 30 32 3
10
10
10
10
10
41 A
41 A
41 A
(3) Adapter bridge, for connecting an STS 6
to an STS 4 or STS 2,5
RB ST 6-(2,5/4)
Imax.: 48 A
30 30 86 0
10
(4) Partition plate, for
visual and electrical separation
of terminal groups, 2 mm thick
ATP-ST 6
PAI 4
30 24 48 1
30 30 92 5
50
10
(5) Test adapter, for 4 mm ∅ test plug PS
and 4 mm ∅ safety test plugs,
making contact in the bridge shaft
1
(6) 2.3 mm ∅ test plug ), consisting of
MPS-RD
PS 5
02 01 55 3
30 30 98 3
10
10
metal part and red insulating sleeve
(7) Modular test plug, can be labeled with ZBF 5
(8) Screwdriver, for
actuating the tension spring
SZF 2 - 0,8 x 4,0
12 04 52 0
10 52 00 2
10
10
(9) Zack strip, 10-section, for
labeling in the terminal center
white
ZB 8:UNPRINTED
Dimensions
Width / length / end cover width
[mm]
[mm]
8.2 / 70 / 2.2
Height (NS 35/7,5 / NS 35/15)
50.0 / 57.5
Technical data in accordance with IEC/ DIN VDE
Maximum // Rated data
[A] / [mm2]
[kV] / –
– / –
52 / 10 // 41 / 6
8 / 3
Rated surge voltage / contamination class
Surge voltage category / insulation material group
Connection capacity
Stranded with ferrule with plastic sleeve
Stranded with ferrule without plastic sleeve
Stranded with TWIN ferrule with plastic sleeve
Stripping length
III / I
[mm2]
[mm2]
[mm2]
[mm]
0.25 - 6
0.25 - 6
0.25 - 1.5
12
Internal cylindrical gauge (IEC 60 947-1)
Insulating material
A 5
PA
Inflammability class in acc. with UL 94
V0
Approval data (UL and CSA/CUL)
Nominal voltage / current / conductor sizes
UL: [V] / [A] / AWG
applied for
applied for
CSA/CUL: [V] / [A] / AWG
1) Further colors are available on request.
Phoenix Contact page 3 of 5
Spring Cage
Ground Terminal Block
STS 6-PE
(IEC)
[mm ]
rigid
solid
flexible
stranded
2
AWG
24-8
IEC 60 947-7-2
0.2-10
0.2-6
Current carrying capacity of mounting rails, see CLIPLINE catalog.
Technical data
Pcs.
Pkt.
Type
OrderNo.
Spring cage ground terminal block,
for mounting on 3
green-yellow terminal width 8.2
STS 6-PE
D-STS 6
30 38 14 7
30 38 18 9
50
50
(1) End cover
gray
(2) Plug-in bridge, for
cross-connections in the
terminal center
2-pos.
3-pos.
4-pos.
5-pos.
10-pos.
FBS 2-8
FBS 3-8
FBS 4-8
FBS 5-8
FBS 10-8
30 30 28 4
30 30 29 7
30 30 30 7
30 30 31 0
30 30 32 3
10
10
10
10
10
(3) Adapter bridge, for connecting an STS 6
to an STS 4 or STS 2,5
RB ST 6-(2,5/4)
30 30 86 0
10
(4) Partition plate, for
visual and electrical separation
of terminal groups, 2 mm thick
ATP-ST 6
PAI 4
30 24 48 1
30 30 92 5
50
10
(5) Test adapter, for 4 mm ∅ test plug PS
and 4 mm ∅ safety test plugs,
making contact in the bridge shaft
1
(6) 2.3 mm ∅ test plug ), consisting of
MPS-RD
PS 5
02 01 55 3
30 30 98 3
10
10
metal part and red insulating sleeve
(7) Modular test plug, can be labeled with ZBF 5
(8) Screwdriver, for
actuating the tension spring
SZF 2 - 0,8 x 4,0
12 04 52 0
10 52 00 2
10
10
(9) Zack strip, 10-section, for
labeling in the terminal center
white
ZB 8:UNPRINTED
Dimensions
Width / length / end cover width
[mm]
[mm]
8.2 / 58 / 2.2
Height (NS 35/7,5 / NS 35/15)
50.0 / 57.5
Technical data in accordance with IEC/ DIN VDE
Maximum // Rated data
[A] / [mm2]
[kV] / –
– / –
–
Rated surge voltage / contamination class
Surge voltage category / insulation material group
Connection capacity
Stranded with ferrule with plastic sleeve
Stranded with ferrule without plastic sleeve
Stranded with TWIN ferrule with plastic sleeve
Stripping length
8 / 3
III / I
[mm2]
[mm2]
[mm2]
[mm]
0.25 - 6
0.25 - 6
0.25 - 1.5
12
Internal cylindrical gauge (IEC 60 947-1)
Insulating material
A 5
PA
Inflammability class in acc. with UL 94
V0
Approval data (UL and CSA/CUL)
Nominal voltage / current / conductor sizes
UL: [V] / [A] / AWG
applied for
applied for
CSA/CUL: [V] / [A] / AWG
1) Further colors are available on request.
Phoenix Contact page 4 of 5
Spring Cage
Ground Terminal Block
STS 6-TWIN-PE
(IEC)
[mm ]
rigid
solid
flexible
stranded
2
AWG
24-8
IEC 60 947-7-2
0.2-10
0.2-6
Current carrying capacity of mounting rails, see CLIPLINE catalog.
Technical data
Pcs.
Pkt.
Type
OrderNo.
Spring cage ground terminal block,
for mounting on 3
green-yellow terminal width 8.2
STS 6-TWIN-PE
D-STS 6-TWIN
30 38 17 6
30 38 20 2
50
50
(1) End cover
gray
(2) Plug-in bridge, for
cross-connections in the
terminal center
2-pos.
3-pos.
4-pos.
5-pos.
10-pos.
FBS 2-8
FBS 3-8
FBS 4-8
FBS 5-8
FBS 10-8
30 30 28 4
30 30 29 7
30 30 30 7
30 30 31 0
30 30 32 3
10
10
10
10
10
(3) Adapter bridge, for connecting an STS 6
to an STS 4 or STS 2,5
RB ST 6-(2,5/4)
30 30 86 0
10
(4) Partition plate, for
visual and electrical separation
of terminal groups, 2 mm thick
ATP-ST 6
PAI 4
30 24 48 1
30 30 92 5
50
10
(5) Test adapter, for 4 mm ∅ test plug PS
and 4 mm ∅ safety test plugs,
making contact in the bridge shaft
1
(6) 2.3 mm ∅ test plug ), consisting of
MPS-RD
PS 5
02 01 55 3
30 30 98 3
10
10
metal part and red insulating sleeve
(7) Modular test plug, can be labeled with ZBF 5
(8) Screwdriver, for
actuating the tension spring
SZF 2 - 0,8 x 4,0
12 04 52 0
10 52 00 2
10
10
(9) Zack strip, 10-section, for
labeling in the terminal center
white
ZB 8:UNPRINTED
Dimensions
Width / length / end cover width
[mm]
[mm]
8.2 / 70 / 2.2
Height (NS 35/7,5 / NS 35/15)
50.0 / 57.5
Technical data in accordance with IEC/ DIN VDE
Maximum // Rated data
[A] / [mm2]
[kV] / –
– / –
–
Rated surge voltage / contamination class
Surge voltage category / insulation material group
Connection capacity
Stranded with ferrule with plastic sleeve
Stranded with ferrule without plastic sleeve
Stranded with TWIN ferrule with plastic sleeve
Stripping length
8 / 3
III / I
[mm2]
[mm2]
[mm2]
[mm]
0.25 - 6
0.25 - 6
0.25 - 1.5
12
Internal cylindrical gauge (IEC 60 947-1)
Insulating material
A 5
PA
Inflammability class in acc. with UL 94
V0
Approval data (UL and CSA/CUL)
Nominal voltage / current / conductor sizes
UL: [V] / [A] / AWG
applied for
applied for
CSA/CUL: [V] / [A] / AWG
1) Further colors are available on request.
PhPoheoneixniCx oCnotnatcatcStepiatege5 5voonf 5
相关型号:
©2020 ICPDF网 联系我们和版权申明