3038600 [PHOENIX]
Modular Terminal Block;
| 型号： | 3038600 |
| 厂家： | 
PHOENIX CONTACT |
| 描述： | Modular Terminal Block 端子和端子排 |
| 文件： | 总10页 (文件大小：2187K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
Four-Conductor Spring Cage Terminal Blocks
ST ...-QUATTRO
The double connection of ST...-QUATTRO allows four
conductors to be connected on one potential. The
QUATTRO variants can therefore be used as compact
power distributors.
The FBS plug-in bridge system allows bridging any
number of terminal blocks and thus achieves further
power distribution.
Phoenix Contact GmbH & Co. KG • 32823 Blomberg, Germany
Phone +49 52 35 3-00 • Fax +49 52 35 3-4 12 00 • www.phoenixcontact.com
Local Contact: www.phoenixcontact.com/salesnetwork
Four-Conductor Spring Cage
Terminal Block
ST 1,5-QUATTRO
(IEC)
[mm ]
rigid
solid
flexible
stranded
I
U
[V]
2
AWG [A]
IEC 60 947-7-1
EN 50 019**
0.08-1.5
0.08-1.5
0.08-1.5
0.08-1.5
28-16 17.5* 500
28-16 17.5* 420
** EU certificate of design approval no.: KEMA 00ATEX2129U 1
)
1) For installation notes and the use of accessories for EEx e applications
see Catalog CLIPLINE.
* The max. load current must not be exceeded by the total current of all connected
conductors.
u P F KEMA
Technical data
Pcs.
Pkt.
Type
OrderNo.
Spring cage terminal block,
for mounting on 3
gray terminal width 4.2
blue terminal width 4.2
ST 1,5-QUATTRO
30 31 18 6
30 31 19 9
50
50
ST 1,5-QUATTRO BU
(1) End cover
gray
gray
D-ST 2,5-QUATTRO
DS-ST 2,5
30 30 51 4
30 36 60 2
50
10
(2) Segment cover, for covering
projecting terminal segments
(3) Insulating stop sleeve, prevents unintentional clamping
of the insulation in the case of smaller cross sections
Cross section range:
0.08-0.2 mm2
0.25-0.5 mm2
white
gray
ISH 1,5/0,2
ISH 1,5/0,5
32 06 13 1
30 31 03 4
50
50
(4) Plug-in bridge, for
cross-connections in the
terminal center
2-pos.
3-pos.
4-pos.
5-pos.
10-pos.
20-pos.
FBS 2-4
FBS 3-4
FBS 4-4
FBS 5-4
FBS 10-4
FBS 20-4
Imax.: 17.5 A
30 30 11 6
30 30 12 9
30 30 13 2
30 30 14 5
30 30 15 8
30 30 35 2
50
50
50
50
10
10
17.5 A
17.5 A
17.5 A
17.5 A
17.5 A
(5) Partition plate, for
visual and electrical separation
of terminal groups, 2 mm thick
ATP ST-QUATTRO
PAI 4
30 30 81 5
30 30 92 5
30 30 95 8
12 04 50 4
08 08 58 7
08 05 00 1
50
10
50
10
10
10
(6) Test adapter, for 4 mm ∅ test connector PS
and 4 mm ∅ safety test connectors,
making contact in the bridge shaft
(7) Warning cover, for the
operating shafts of the “mini-spring”
ST spring cage terminal blocks
WST 1,5
(8) Screwdriver, for
actuating the tension spring
SZF 0 - 0,4 x 2,5
ZBF 4:UNPRINTED
ZB 4:UNPRINTED
(9) Zack marker sheet, flat, 100-section, for
labeling the outer marker grooves
white
(10) Zack strip, 10-section, for
labeling in the terminal center
and on the plug-in bridges
white
Dimensions
Width / length / end cover width
[mm]
[mm]
4.2 / 72 / 2.2
Height (NS 35/7.5 / NS 35/15)
36.5 / 44
Technical data in accordance with IEC/ DIN VDE
Maximum load current/ cross section
Rated surge voltage / contamination class
Surge voltage category / insulation material group
Capacity connection
Stranded with ferrule with plastic sleeve
Stranded with ferrule without plastic sleeve
Stranded with TWIN ferrule with plastic sleeve
Stripping length
[A] / [mm2]
[kV] / –
– / –
17.5 / 1.5
6 / 3
III / I
[mm2]
[mm2]
[mm2]
[mm]
0.25 - 1.5
0.25 - 1.5
0.5
10
Internal cylindrical gauge (IEC 60 947-1)
Insulating material
A 1
PA
Inflammability class in acc. with UL 94
V0
Approval data (UL and CSA/CUL)
Nom. voltage / nom. current / conduc. sizes
UL: [V] / [A] / AWG
–
–
CSA/CUL: [V] / [A] / AWG
Phoenix Contact page 2 of 10
Four-Conductor Spring Cage
Ground Terminal Block
ST 1,5-QUATTRO-PE
(IEC)
[mm ]
rigid
solid
flexible
stranded
2
AWG
IEC 60 947-7-2
EN 50 019*
0.08-1.5
0.08-1,5
0.08-1.5
0.08-1.5
28-16
28-16
* EU certificate of design approval no.: KEMA 00ATEX2129U 1
)
1) For installation notes and the use of accessories for EEx e applications
see Catalog CLIPLINE.
The current carrying capacity of the mounting rails should be observed.
u P F KEMA
Technical data
Pcs.
Pkt.
Type
OrderNo.
Spring cage ground terminal block,
for mounting on 3
green-yellow terminal width 4.2
ST 1,5-QUATTRO-PE
D-ST 2,5-QUATTRO
DS-ST 2,5
30 31 20 9
30 30 51 4
30 36 60 2
50
50
10
(1) End cover
gray
gray
(2) Segment cover, for covering
projecting terminal segments
(3) Insulating stop sleeve, prevents unintentional clamping
of the insulation in the case of smaller cross sections
Cross section range:
0.08-0.2 mm2
0.25-0.5 mm2
white
gray
ISH 1,5/0,2
ISH 1,5/0,5
32 06 13 1
30 31 03 4
50
50
(4) Screwdriver, for
actuating the tension spring
SZF 0 - 0,4 x 2,5
12 04 50 4
08 08 58 7
08 05 00 1
10
10
10
(5) Zack strip, flat, for
labeling the outer marker grooves
white
white
ZBF 4:UNPRINTED
ZB 4:UNPRINTED
(6) Zack strip, 10-section, for
labeling in the terminal center
and on the plug-in bridges
Dimensions
Width / length / end cover width
[mm]
[mm]
4.2 / 72 / 2.2
Height (NS 35/7.5 / NS 35/15)
36.5 / 44
Technical data in accordance with IEC/ DIN VDE
Maximum load current/ cross section
Rated surge voltage / contamination class
Surge voltage category / insulation material group
Capacity connection
Stranded with ferrule with plastic sleeve
Stranded with ferrule without plastic sleeve
Stranded with TWIN ferrule with plastic sleeve
Stripping length
[A] / [mm2]
[kV] / –
– / –
–
6 / 3
III / I
[mm2]
[mm2]
[mm2]
[mm]
0.25 - 1.5
0.25 - 1.5
0.5
10
Internal cylindrical gauge (IEC 60 947-1)
Insulating material
A 1
PA
Inflammability class in acc. with UL 94
V0
Approval data (UL and CSA/CUL)
Nom. voltage / nom. current / conduc. sizes
UL: [V] / [A] / AWG
–
–
CSA/CUL: [V] / [A] / AWG
Phoenix Contact page 3 of 10
Four-Conductor Spring Cage
Terminal Block
ST 2,5-QUATTRO
(IEC)
[mm ]
rigid
solid
flexible
stranded
I
U
[V]
2
AWG [A]
IEC 60 947-7-1
EN 50 019**
0.08-4
0.08-4
0.08-2.5
0.08-2.5
28-12 28*
28-12 24/21* 550
** EU certificate of design approval no.: KEMA 00ATEX2052U 1
800
)
1) For installation notes and the use of accessories for EEx e applications
see Catalog CLIPLINE.
* The max. load current must not be exceeded by the total current of all connected
conductors.
u P F KEMA
Technical data
Pcs.
Pkt.
Type
OrderNo.
Spring cage terminal block,
for mounting on 3
gray terminal width 5.2
blue terminal width 5.2
ST 2,5-QUATTRO
30 31 30 6
30 31 31 9
50
50
ST 2,5-QUATTRO BU
(1) End cover
gray
gray
D-ST 2,5-QUATTRO
DS-ST 2,5
30 30 51 4
30 36 60 2
50
10
(2) Segment cover, for covering
projecting terminal segments
(3) Insulating stop sleeve, prevents unintentional clamping
of the insulation in the case of smaller cross sections
Cross section range:
0.08-0.2 mm2
0.25-0.5 mm2
0.75-1 mm2
white
gray
black
ISH 2,5/0,2
ISH 2,5/0,5
ISH 2,5/1
30 02 84 3
30 02 85 6
30 02 86 9
50
50
50
(4) Plug-in bridge, for
cross-connections in the
terminal center
2-pos.
3-pos.
4-pos.
5-pos.
10-pos.
20-pos.
FBS 2-5
FBS 3-5
FBS 4-5
FBS 5-5
FBS 10-5
FBS 20-5
Imax.: 24 A
24 A
30 30 16 1
30 30 17 4
30 30 18 7
30 30 19 0
30 30 21 3
30 30 22 6
50
50
50
50
10
10
24 A
24 A
24 A
24 A
(5) Partition plate, for
visual and electrical separation
of terminal groups, 2 mm thick
ATP ST-QUATTRO
PAI 4
30 30 81 5
30 30 92 5
50
10
(6) Test adapter, for 4 mm ∅ test connector PS
and 4 mm ∅ safety test connectors,
making contact in the bridge shaft
1
(7) 2.3 mm ∅ test connector ), consisting of
MPS-RD
RPS
02 01 55 3
02 01 64 7
10
10
metal part and red insulating sleeve
(8) Reducing plug
(9) Warning cover, for the
operating shafts of the “mini-spring”
ST spring cage terminal blocks
WST 2,5
30 30 94 1
12 04 51 7
08 08 64 2
10 50 00 4
50
10
10
10
(10) Screwdriver, for
actuating the tension spring
SZF 1 - 0,6 x 3,5
ZBF 5:UNPRINTED
ZB 5:UNPRINTED
(11) Zack strip, flat, for
labeling the outer marker grooves
white
white
(12) Zack strip, 10-section, for
labeling in the terminal center
and on the plug-in bridges
Dimensions
Width / length / end cover width
[mm]
[mm]
5.2 / 72 / 2.2
Height (NS 35/7.5 / NS 35/15)
36.5 / 44
Technical data in accordance with IEC/ DIN VDE
Maximum load current/ cross section
Rated surge voltage / contamination class
Surge voltage category / insulation material group
Capacity connection
Stranded with ferrule with plastic sleeve
Stranded with ferrule without plastic sleeve
Stranded with TWIN ferrule with plastic sleeve
Stripping length
[A] / [mm2]
[kV] / –
– / –
28 / 4
8 / 3
III / I
[mm2]
[mm2]
[mm2]
[mm]
0.25 - 2.5
0.25 - 2.5
0.5
10
Internal cylindrical gauge (IEC 60 947-1)
Insulating material
A 3
PA
Inflammability class in acc. with UL 94
V0
Approval data (UL and CSA/CUL)
Nom. voltage / nom. current / conduc. sizes
CSA/CUL: [V] / [A] / AWG
) Further colors are available on request.
UL: [V] / [A] / AWG
600 / 20 / 26 - 12
600 / 20 / 26 - 12
1
Phoenix Contact page 4 of 10
Four-Conductor Spring Cage
Ground Terminal Block
ST 2,5-QUATTRO-PE
(IEC)
[mm ]
rigid
solid
flexible
stranded
2
AWG
IEC 60 947-7-2
EN 50 019*
0.08-4
0.08-4
0.08-2.5
0.08-2.5
28-12
28-12
* EU certificate of design approval no.: KEMA 00ATEX2052U 1
)
1) For installation notes and the use of accessories for EEx e applications
see Catalog CLIPLINE.
The current carrying capacity of the mounting rails should be observed.
u P F KEMA
Technical data
Pcs.
Pkt.
Type
OrderNo.
Spring cage ground terminal block,
for mounting on 3
green-yellow terminal width 5.2
ST 2,5-QUATTRO-PE
D-ST 2,5-QUATTRO
DS-ST 2,5
30 31 32 2
30 30 51 4
30 36 60 2
50
50
10
(1) End cover
gray
gray
(2) Segment cover, for covering
projecting terminal segments
(3) Insulating stop sleeve, prevents unintentional clamping
of the insulation in the case of smaller cross sections
Cross section range:
0.08-0.2 mm2
0.25-0.5 mm2
0.75-1 mm2
white
gray
black
ISH 2,5/0,2
ISH 2,5/0,5
ISH 2,5/1
30 02 84 3
30 02 85 6
30 02 86 9
50
50
50
(4) Screwdriver, for
actuating the tension spring
SZF 1 - 0,6 x 3,5
12 04 51 7
08 08 64 2
10 50 00 4
10
10
10
(5) Zack strip, flat, for
labeling the outer marker grooves
white
white
ZBF 5:UNPRINTED
ZB 5:UNPRINTED
(6) Zack strip, 10-section, for
labeling in the terminal center
and on the plug-in bridges
Dimensions
Width / length / end cover width
[mm]
[mm]
5.2 / 72 / 2.2
Height (NS 35/7.5 / NS 35/15)
36.5 / 44
Technical data in accordance with IEC/ DIN VDE
Maximum load current/ cross section
Rated surge voltage / contamination class
Surge voltage category / insulation material group
Capacity connection
Stranded with ferrule with plastic sleeve
Stranded with ferrule without plastic sleeve
Stranded with TWIN ferrule with plastic sleeve
Stripping length
[A] / [mm2]
[kV] / –
– / –
–
8 / 3
III / I
[mm2]
[mm2]
[mm2]
[mm]
0.25 - 2.5
0.25 - 2.5
0.5
10
Internal cylindrical gauge (IEC 60 947-1)
Insulating material
A 3
PA
Inflammability class in acc. with UL 94
V0
Approval data (UL and CSA/CUL)
Nom. voltage / nom. current / conduc. sizes
UL: [V] / [A] / AWG
– / – / 26 - 12
– / – / 26 - 12
CSA/CUL: [V] / [A] / AWG
Phoenix Contact page 5 of 10
Four-Conductor Spring Cage
Terminal Blocks
ST 4-QUATTRO
(IEC)
[mm ]
rigid
solid
flexible
stranded
I
U
[V]
2
AWG [A]
IEC 60 947-7-1
EN 50 019**
0.08-6
0.08-6
0.08-4
0.08-4
28-10 40*
28-10 34/25* 550
** EU certificate of design approval no.: KEMA 00ATEX2129U 1
800
)
1) For installation notes and the use of accessories for EEx e applications
see Catalog CLIPLINE.
* The max. load current must not be exceeded by the total current of all connected
conductors.
u P F KEMA
Technical data
Pcs.
Pkt.
Type
OrderNo.
Spring cage terminal block,
for mounting on 3
gray terminal width 6.2
blue terminal width 6.2
ST 4-QUATTRO
30 31 44 5
30 31 45 8
50
50
ST 4-QUATTRO BU
(1) End cover
gray
gray
D-ST 4-QUATTRO
DS-ST 4
30 30 52 7
30 36 61 5
50
10
(2) Segment cover, for covering
projecting terminal segments
(3) Insulating stop sleeve, prevents unintentional clamping
of the insulation in the case of smaller cross sections
Cross section range:
0.25-0.5 mm2
0.75-1 mm2
gray
black
ISH 4/0,5
ISH 4/1
30 02 88 5
30 02 89 8
50
50
(4) Plug-in bridge, for
cross-connections in the
terminal center
2-pos.
3-pos.
4-pos.
5-pos.
10-pos.
20-pos.
FBS 2-6
FBS 3-6
FBS 4-6
FBS 5-6
FBS 10-6
FBS 20-6
Imax.: 32 A
32 A
30 30 33 6
30 30 24 2
30 30 25 5
30 30 34 9
30 30 27 1
30 30 36 5
50
50
50
50
10
10
32 A
32 A
32 A
32 A
(5) Partition plate, for
visual and electrical separation
of terminal groups, 2 mm thick
ATP ST-QUATTRO
PAI 4
30 30 81 5
30 30 92 5
50
10
(6) Test adapter, for 4 mm ∅ test connector PS
and 4 mm ∅ safety test connectors,
making contact in the bridge shaft
1
(7) 2.3 mm ∅ test connector ), consisting of
MPS-RD
RPS
02 01 55 3
02 01 64 7
10
10
metal part and red insulating sleeve
(8) Reducing plug
(9) Warning cover, for the
operating shafts of the “mini-spring”
ST spring cage terminal blocks
WST 4
30 30 95 4
12 04 51 7
08 08 71 0
10 51 00 3
50
10
10
10
(10) Screwdriver, for
actuating the tension spring
SZF 1 - 0,6 x 3,5
ZBF 6:UNPRINTED
ZB 6:UNPRINTED
(11) Zack strip, flat, for
labeling the outer marker grooves
white
white
(12) Zack strip, 10-section, for
labeling in the terminal center
and on the plug-in bridges
Dimensions
Width / length / end cover width
[mm]
[mm]
6.2 / 87 / 2.2
Height (NS 35/7.5 / NS 35/15)
36.5 / 44
Technical data in accordance with IEC/ DIN VDE
Maximum load current/ cross section
Rated surge voltage / contamination class
Surge voltage category / insulation material group
Capacity connection
Stranded with ferrule with plastic sleeve
Stranded with ferrule without plastic sleeve
Stranded with TWIN ferrule with plastic sleeve
Stripping length
[A] / [mm2]
[kV] / –
– / –
40 / 6
8 / 3
III / I
[mm2]
[mm2]
[mm2]
[mm]
0.25 - 4
0.25 - 4
0.5 - 1
10
Internal cylindrical gauge (IEC 60 947-1)
Insulating material
A 4
PA
Inflammability class in acc. with UL 94
V0
Approval data (UL and CSA/CUL)
Nom. voltage / nom. current / conduc. sizes
CSA/CUL: [V] / [A] / AWG
) Further colors are available on request.
UL: [V] / [A] / AWG
–
–
1
Phoenix Contact page 6 of 10
Four-Conductor Spring Cage
Ground Terminal Block
ST 4-QUATTRO-PE
(IEC)
[mm ]
rigid
solid
flexible
stranded
2
AWG
IEC 60 947-7-2
EN 50 019*
0.08-6
0,08-6
0.08-4
0,08-4
28-10
28-10
* EU certificate of design approval no.: KEMA 00ATEX2129U 1
)
1) For installation notes and the use of accessories for EEx e applications
see Catalog CLIPLINE.
The current carrying capacity of the mounting rails should be observed.
u P F KEMA
Technical data
Pcs.
Pkt.
Type
OrderNo.
Spring cage ground terminal block,
for mounting on 3
green-yellow terminal width 6.2
ST 4-QUATTRO-PE
D-ST 4-QUATTRO
DS-ST 4
30 31 46 1
30 30 52 7
30 36 61 5
50
50
10
(1) End cover
gray
gray
(2) Segment cover, for covering
projecting terminal segments
(3) Insulating stop sleeve, prevents unintentional clamping
of the insulation in the case of smaller cross sections
Cross section range:
0.25-0.5 mm2
0.75-1 mm2
gray
black
ISH 4/0,5
ISH 4/1
30 02 88 5
30 02 89 8
50
50
(4) Screwdriver, for
actuating the tension spring
SZF 1 - 0,6 x 3,5
12 04 51 7
08 08 71 0
10 51 00 3
10
10
10
(5) Zack strip, flat, for
labeling the outer marker grooves
white
white
ZBF 6:UNPRINTED
ZB 6:UNPRINTED
(6) Zack strip, 10-section, for
labeling in the terminal center
and on the plug-in bridges
Dimensions
Width / length / end cover width
[mm]
[mm]
6.2 / 87 / 2.2
Height (NS 35/7.5 / NS 35/15)
36.5 / 44
Technical data in accordance with IEC/ DIN VDE
Maximum load current/ cross section
Rated surge voltage / contamination class
Surge voltage category / insulation material group
Capacity connection
Stranded with ferrule with plastic sleeve
Stranded with ferrule without plastic sleeve
Stranded with TWIN ferrule with plastic sleeve
Stripping length
[A] / [mm2]
[kV] / –
– / –
–
8 / 3
III / I
[mm2]
[mm2]
[mm2]
[mm]
0.25 - 4
0.25 - 4
0.5 - 1
10
Internal cylindrical gauge (IEC 60 947-1)
Insulating material
A 3
PA
Inflammability class in acc. with UL 94
V0
Approval data (UL and CSA/CUL)
Nom. voltage / nom. current / conduc. sizes
UL: [V] / [A] / AWG
–
–
CSA/CUL: [V] / [A] / AWG
Phoenix Contact page 7 of 10
Four-Conductor Spring Cage
Terminal Block
ST 1,5-QUATTRO-U
(IEC)
[mm ]
rigid
solid
flexible
stranded
I
U
[V]
2
AWG [A]
IEC 60 947-7-1
0.08-1.5
0.08-1.5
28-16 17.5* 500
* The max. load current must not be exceeded by the total current of all connected
conductors.
Technical data
Pcs.
Pkt.
Type
OrderNo.
Spring cage terminal block,
for mounting on 3
gray terminal width 4.2
ST 1,5-QUATTRO-U
D-ST 2,5-QUATTRO
DS-ST 2,5
30 38 60 0
30 30 51 4
30 36 60 2
50
50
10
(1) End cover
gray
gray
(2) Segment cover, for covering
projecting terminal segments
(3) Insulating stop sleeve, prevents unintentional clamping
of the insulation in the case of smaller cross sections
Cross section range:
0.08-0.2 mm2
0.25-0.5 mm2
white
gray
ISH 2,5/0,2
ISH 2,5/0,5
30 02 84 3
30 02 85 6
50
50
(4) Plug-in bridge, for
cross-connections in the
terminal center
2-pos.
3-pos.
4-pos.
5-pos.
10-pos.
20-pos.
FBS 2-4
FBS 3-4
FBS 4-4
FBS 5-4
FBS 10-4
FBS 20-4
Imax.: 17,5 A
30 30 11 6
30 30 12 9
30 30 13 2
30 30 14 5
30 30 15 8
30 30 35 2
50
50
50
50
10
10
17,5 A
17,5 A
17,5 A
17,5 A
17,5 A
(5) Partition plate, for
visual and electrical separation
of terminal groups, 2 mm thick
ATP ST-QUATTRO
PAI 4
30 30 81 5
30 30 92 5
50
10
(6) Test adapter, for 4 mm ∅ test connector PS
and 4 mm ∅ safety test connectors,
making contact in the bridge shaft
1
(7) 2.3 mm ∅ test connector ), consisting of
MPS-RD
RPS
02 01 55 3
02 01 64 7
10
10
metal part and red insulating sleeve
(8) Reducing plug
(9) Warning cover, for the
operating shafts of the “mini-spring”
ST spring cage terminal blocks
WST 1,5
30 30 95 8
12 04 50 4
08 08 58 7
08 05 00 1
50
10
10
10
(10) Screwdriver, for
actuating the tension spring
SZF 1 - 0,4 x 2,5
ZBF 4:UNPRINTED
ZB 4:UNPRINTED
(11) Zack strip, flat, for
labeling the outer marker grooves
white
white
(12) Zack strip, 10-section, for
labeling in the terminal center
and on the plug-in bridges
Dimensions
Width / length / end cover width
[mm]
[mm]
4.2 / 72 / 2.2
Height (NS 35/7.5 / NS 35/15)
36.5 / 44
Technical data in accordance with IEC/ DIN VDE
Maximum load current/ cross section
Rated surge voltage / contamination class
Surge voltage category / insulation material group
Capacity connection
Stranded with ferrule with plastic sleeve
Stranded with ferrule without plastic sleeve
Stranded with TWIN ferrule with plastic sleeve
Stripping length
[A] / [mm2]
[kV] / –
– / –
17.5 / 1.5
6 / 3
III / I
[mm2]
[mm2]
[mm2]
[mm]
0.25 - 2.5
0.25 - 2.5
0.5
10
Internal cylindrical gauge (IEC 60 947-1)
Insulating material
A 1
PA
Inflammability class in acc. with UL 94
V0
Approval data (UL and CSA/CUL)
Nom. voltage / nom. current / conduc. sizes
CSA/CUL: [V] / [A] / AWG
) Further colors are available on request.
UL: [V] / [A] / AWG
–
–
1
Phoenix Contact page 8 of 10
Four-Conductor Spring Cage
Terminal Block
ST 2,5-QUATTRO-U
(IEC)
[mm ]
rigid
solid
flexible
stranded
I
U
[V]
2
AWG [A]
IEC 60 947-7-1
0.08-4
0.08-2.5
28-12 28*
800
* The max. load current must not be exceeded by the total current of all connected
conductors.
Technical data
Pcs.
Pkt.
Type
OrderNo.
30 31 63 6
Spring cage terminal block,
for mounting on 3
gray terminal width 5.2
ST 2,5-QUATTRO-U
50
(1) End cover
gray
gray
D-ST 2,5-QUATTRO
DS-ST 2,5
30 30 51 4
30 36 60 2
50
10
(2) Segment cover, for covering
projecting terminal segments
(3) Insulating stop sleeve, prevents unintentional clamping
of the insulation in the case of smaller cross sections
Cross section range:
0.08-0.2 mm2
0.25-0.5 mm2
0.75-1 mm2
white
gray
black
ISH 2,5/0,2
ISH 2,5/0,5
ISH 2,5/1
30 02 84 3
30 02 85 6
30 02 86 9
50
50
50
(4) Plug-in bridge, for
cross-connections in the
terminal center
2-pos.
3-pos.
4-pos.
5-pos.
10-pos.
20-pos.
FBS 2-5
FBS 3-5
FBS 4-5
FBS 5-5
FBS 10-5
FBS 20-5
Imax.: 24 A
24 A
30 30 16 1
30 30 17 4
30 30 18 7
30 30 19 0
30 30 21 3
30 30 22 6
50
50
50
50
10
10
24 A
24 A
24 A
24 A
(5) Partition plate, for
visual and electrical separation
of terminal groups, 2 mm thick
ATP ST-QUATTRO
PAI 4
30 30 81 5
30 30 92 5
50
10
(6) Test adapter, for 4 mm ∅ test connector PS
and 4 mm ∅ safety test connectors,
making contact in the bridge shaft
1
(7) 2.3 mm ∅ test connector ), consisting of
MPS-RD
RPS
02 01 55 3
02 01 64 7
10
10
metal part and red insulating sleeve
(8) Reducing plug
(9) Warning cover, for the
operating shafts of the “mini-spring”
ST spring cage terminal blocks
WST 2,5
30 30 94 1
12 04 51 7
08 08 64 2
10 50 00 4
50
10
10
10
(10) Screwdriver, for
actuating the tension spring
SZF 1 - 0,6 x 3,5
ZBF 5:UNPRINTED
ZB 5:UNPRINTED
(11) Zack strip, flat, for
labeling the outer marker grooves
white
white
(12) Zack strip, 10-section, for
labeling in the terminal center
and on the plug-in bridges
Dimensions
Width / length / end cover width
[mm]
[mm]
5.2 / 72 / 2.2
Height (NS 35/7.5 / NS 35/15)
36.5 / 44
Technical data in accordance with IEC/ DIN VDE
Maximum load current/ cross section
Rated surge voltage / contamination class
Surge voltage category / insulation material group
Capacity connection
Stranded with ferrule with plastic sleeve
Stranded with ferrule without plastic sleeve
Stranded with TWIN ferrule with plastic sleeve
Stripping length
[A] / [mm2]
[kV] / –
– / –
28 / 4
8 / 3
III / I
[mm2]
[mm2]
[mm2]
[mm]
0.25 - 2.5
0.25 - 2.5
0.5
10
Internal cylindrical gauge (IEC 60 947-1)
Insulating material
A 3
PA
Inflammability class in acc. with UL 94
V0
Approval data (UL and CSA/CUL)
Nom. voltage / nom. current / conduc. sizes
CSA/CUL: [V] / [A] / AWG
) Further colors are available on request.
UL: [V] / [A] / AWG
–
–
1
Phoenix Contact page 9 of 10
Four-Conductor Spring Cage
Terminal Block
ST 4-QUATTRO-U
(IEC)
[mm ]
rigid
solid
flexible
stranded
I
U
[V]
2
AWG [A]
IEC 60 947-7-1
0.08-4
0.08-2.5
28-12 28*
800
* The max. load current must not be exceeded by the total current of all connected
conductors.
Technical data
Pcs.
Pkt.
Type
OrderNo.
Spring cage terminal block,
for mounting on 3
gray terminal width 6.2
ST 4-QUATTRO-U
D-ST 4-QUATTRO
DS-ST 4
30 38 63 9
30 30 52 7
30 36 61 5
50
50
10
(1) End cover
gray
gray
(2) Segment cover, for covering
projecting terminal segments
(3) Insulating stop sleeve, prevents unintentional clamping
of the insulation in the case of smaller cross sections
Cross section range:
0.25-0.5 mm2
0.75-1 mm2
gray
black
ISH 4/0,5
ISH 4/1
30 02 88 5
30 02 89 8
50
50
(4) Plug-in bridge, for
cross-connections in the
terminal center
2-pos.
3-pos.
4-pos.
5-pos.
10-pos.
20-pos.
FBS 2-6
FBS 3-6
FBS 4-6
FBS 5-6
FBS 10-6
FBS 20-6
Imax.: 32 A
32 A
30 30 33 6
30 30 24 2
30 30 25 5
30 30 34 9
30 30 27 1
30 30 36 5
50
50
50
50
10
10
32 A
32 A
32 A
32 A
(5) Partition plate, for
visual and electrical separation
of terminal groups, 2 mm thick
ATP ST-QUATTRO
PAI 4
30 30 81 5
30 30 92 5
50
10
(6) Test adapter, for 4 mm ∅ test connector PS
and 4 mm ∅ safety test connectors,
making contact in the bridge shaft
1
(7) 2.3 mm ∅ test connector ), consisting of
MPS-RD
RPS
02 01 55 3
02 01 64 7
10
10
metal part and red insulating sleeve
(8) Reducing plug
(9) Warning cover, for the
operating shafts of the “mini-spring”
ST spring cage terminal blocks
WST 4
30 30 95 4
12 04 51 7
08 08 71 0
10 51 00 3
50
10
10
10
(10) Screwdriver, for
actuating the tension spring
SZF 1 - 0,6 x 3,5
ZBF 6:UNPRINTED
ZB 6:UNPRINTED
(11) Zack strip, flat, for
labeling the outer marker grooves
white
white
(12) Zack strip, 10-section, for
labeling in the terminal center
and on the plug-in bridges
Dimensions
Width / length / end cover width
[mm]
[mm]
6.2 / 87 / 2.2
Height (NS 35/7.5 / NS 35/15)
36.5 / 44
Technical data in accordance with IEC/ DIN VDE
Maximum load current/ cross section
Rated surge voltage / contamination class
Surge voltage category / insulation material group
Capacity connection
Stranded with ferrule with plastic sleeve
Stranded with ferrule without plastic sleeve
Stranded with TWIN ferrule with plastic sleeve
Stripping length
[A] / [mm2]
[kV] / –
– / –
40 / 6
8 / 3
III / I
[mm2]
[mm2]
[mm2]
[mm]
0.25 - 4
0.25 - 4
0.5 - 1
10
Internal cylindrical gauge (IEC 60 947-1)
Insulating material
A 4
PA
Inflammability class in acc. with UL 94
V0
Approval data (UL and CSA/CUL)
Nom. voltage / nom. current / conduc. sizes
CSA/CUL: [V] / [A] / AWG
) Further colors are available on request.
UL: [V] / [A] / AWG
–
–
1
Phoenix Contact page 10 of 10
相关型号：
©2020 ICPDF网 联系我们和版权申明