3245040 [PHOENIX]
Modular Terminal Block;
| 型号： | 3245040 |
| 厂家： | 
PHOENIX CONTACT |
| 描述： | Modular Terminal Block 端子和端子排 |
| 文件： | 总18页 (文件大小：188K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
https://www.phoenixcontact.com/us/products/3245040
N disconnect terminal block - UTN 10 - 3245040
Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's
documentation. Our General Terms of Use for Downloads are valid
(http://phoenixcontact.com/download)
N disconnect terminal block, Screw connection, Cross section: 0.5 mm² - 16 mm², AWG: 20 - 6, Width: 10.2 mm,
Color: blue, Mounting type: NS 35/7,5, NS 35/15
Why buy this product
Same shape as UT standard terminal blocks
Key Commercial Data
Packing unit
1 STK
Minimum order quantity
50 STK
GTIN
GTIN
4046356299015
20.000 g
Weight per Piece (excluding packing)
Custom tariff number
Country of origin
85369010
Poland
Technical data
General
Assembly instructions:
For secure fastening of the neutral busbar, supports must be set at the
beginning and end of each terminal strip as well as every 20 cm on longer
terminal strips.
Note
Number of levels
Number of connections
Potentials
1
1
1
Nominal cross section
Color
10 mm²
blue
02/09/2017 Page 1 / 18
https://www.phoenixcontact.com/us/products/3245040
N disconnect terminal block - UTN 10 - 3245040
Technical data
General
Insulating material
PA
Flammability rating according to UL 94
Maximum load current
V0
57 A
Rated surge voltage
6 kV
Degree of pollution
3
Overvoltage category
III
Insulating material group
Maximum load current
I
57 A
Nominal current IN
57 A
Nominal voltage UN
400 V
Open side panel
Yes
Shock protection test specification
Back of the hand protection
Finger protection
DIN EN 50274 (VDE 0660-514):2002-11
guaranteed
guaranteed
Test passed
7.3 kV
Result of surge voltage test
Surge voltage test setpoint
Result of power-frequency withstand voltage test
Power frequency withstand voltage setpoint
Test passed
1.89 kV
Result of the test for mechanical stability of terminal points (5 x conductor
connection)
Test passed
Result of bending test
Test passed
10 rpm
Bending test rotation speed
Bending test turns
135
Bending test conductor cross section/weight
0.5 mm² / 0.3 kg
10 mm² / 2 kg
16 mm² / 2.9 kg
Test passed
0.5 mm²
20 N
Tensile test result
Conductor cross section tensile test
Tractive force setpoint
Conductor cross section tensile test
Tractive force setpoint
10 mm²
90 N
Conductor cross section tensile test
Tractive force setpoint
16 mm²
100 N
Result of tight fit on support
Tight fit on carrier
Test passed
NS 35
Setpoint
5 N
Result of voltage-drop test
Test passed
02/09/2017 Page 2 / 18
https://www.phoenixcontact.com/us/products/3245040
N disconnect terminal block - UTN 10 - 3245040
Technical data
General
Requirements, voltage drop
≤ 4.8 mV
Test passed
Test passed
10 mm²
Result of temperature-rise test
Short circuit stability result
Conductor cross section short circuit testing
Short-time current
1.2 kA
Result of aging test
Test passed
192
Ageing test for screwless modular terminal block temperature cycles
Result of thermal test
Test passed
30 s
Proof of thermal characteristics (needle flame) effective duration
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21)) 130 °C
Static insulating material application in cold
Behavior in fire for rail vehicles (DIN 5510-2)
Flame test method (DIN EN 60695-11-10)
-60 °C
Test passed
V0
Oxygen index (DIN EN ISO 4589-2)
>32 %
NF F16-101, NF F10-102 Class I
2
NF F16-101, NF F10-102 Class F
2
Surface flammability NFPA 130 (ASTM E 162)
Specific optical density of smoke NFPA 130 (ASTM E 662)
Smoke gas toxicity NFPA 130 (SMP 800C)
Calorimetric heat release NFPA 130 (ASTM E 1354)
Fire protection for rail vehicles (DIN EN 45545-2) R22
Fire protection for rail vehicles (DIN EN 45545-2) R23
Fire protection for rail vehicles (DIN EN 45545-2) R24
Fire protection for rail vehicles (DIN EN 45545-2) R26
passed
passed
passed
28 MJ/kg
HL 1 - HL 3
HL 1 - HL 3
HL 1 - HL 3
HL 1 - HL 3
Dimensions
Width
10.2 mm
2.2 mm
55 mm
End cover width
Length
Height
46.9 mm
47.5 mm
55 mm
Height NS 35/7,5
Height NS 35/15
Connection data
Connection method
Screw connection
IEC 60947-7-1
0.5 mm²
Connection in acc. with standard
Conductor cross section solid min.
02/09/2017 Page 3 / 18
https://www.phoenixcontact.com/us/products/3245040
N disconnect terminal block - UTN 10 - 3245040
Technical data
Connection data
Conductor cross section solid max.
16 mm²
20
Conductor cross section AWG min.
Conductor cross section AWG max.
6
Conductor cross section flexible min.
0.5 mm²
16 mm²
20
Conductor cross section flexible max.
Min. AWG conductor cross section, flexible
Max. AWG conductor cross section, flexible
6
Conductor cross section flexible, with ferrule without plastic sleeve min.
Conductor cross section flexible, with ferrule without plastic sleeve max.
Conductor cross section flexible, with ferrule with plastic sleeve min.
Conductor cross section flexible, with ferrule with plastic sleeve max.
2 conductors with same cross section, solid min.
2 conductors with same cross section, solid max.
2 conductors with same cross section, stranded min.
2 conductors with same cross section, stranded max.
0.5 mm²
10 mm²
0.5 mm²
10 mm²
0.5 mm²
4 mm²
0.5 mm²
4 mm²
2 conductors with same cross section, stranded, TWIN ferrules with plastic
sleeve, min.
0.5 mm²
6 mm²
2 conductors with same cross section, stranded, TWIN ferrules with plastic
sleeve, max.
2 conductors with same cross section, stranded, ferrules without plastic
sleeve, min.
0.5 mm²
2.5 mm²
2 conductors with same cross section, stranded, ferrules without plastic
sleeve, max.
Stripping length
10 mm
M4
Screw thread
Tightening torque, min
Tightening torque max
1.5 Nm
1.8 Nm
Standards and Regulations
Connection in acc. with standard
IEC 60947-7-1
V0
Flammability rating according to UL 94
Environmental Product Compliance
China RoHS
Environmentally Friendly Use Period = 50
For details about hazardous substances go to tab “Downloads”, Category
“Manufacturer's declaration”
Drawings
02/09/2017 Page 4 / 18
https://www.phoenixcontact.com/us/products/3245040
N disconnect terminal block - UTN 10 - 3245040
Circuit diagram
Classifications
eCl@ss
eCl@ss 4.0
eCl@ss 4.1
eCl@ss 5.0
eCl@ss 5.1
eCl@ss 6.0
eCl@ss 7.0
eCl@ss 8.0
eCl@ss 9.0
27141126
27141126
27141126
27141126
27141126
27141126
27141138
27141138
ETIM
ETIM 2.0
ETIM 3.0
ETIM 4.0
ETIM 5.0
ETIM 6.0
EC000897
EC000897
EC000902
EC001257
EC001257
UNSPSC
UNSPSC 6.01
UNSPSC 7.0901
UNSPSC 11
30211811
39121410
39121410
39121410
39121410
UNSPSC 12.01
UNSPSC 13.2
Approvals
Approvals
Approvals
EAC
Ex Approvals
02/09/2017 Page 5 / 18
https://www.phoenixcontact.com/us/products/3245040
N disconnect terminal block - UTN 10 - 3245040
Approvals
Approval details
EAC
7500651.22.01.00246
Accessories
Accessories
DIN rail
DIN rail perforated - NS 35/ 7,5 PERF 2000MM - 0801733
DIN rail, material: steel galvanized and passivated with a thick layer, perforated, height 7.5 mm, width 35 mm, length:
2000 mm
DIN rail, unperforated - NS 35/ 7,5 UNPERF 2000MM - 0801681
DIN rail, material: Steel, unperforated, height 7.5 mm, width 35 mm, length: 2 m
DIN rail perforated - NS 35/ 7,5 WH PERF 2000MM - 1204119
DIN rail 35 mm (NS 35)
DIN rail - NS 35/ 7,5 WH UNPERF 2000MM - 1204122
DIN rail 35 mm (NS 35)
02/09/2017 Page 6 / 18
https://www.phoenixcontact.com/us/products/3245040
N disconnect terminal block - UTN 10 - 3245040
Accessories
DIN rail, unperforated - NS 35/ 7,5 AL UNPERF 2000MM - 0801704
DIN rail, unperforated, Width: 35 mm, Height: 7.5 mm, Length: 2000 mm, Color: silver
DIN rail perforated - NS 35/ 7,5 ZN PERF 2000MM - 1206421
DIN rail, material: Galvanized, perforated, height 7.5 mm, width 35 mm, length: 2 m
DIN rail, unperforated - NS 35/ 7,5 ZN UNPERF 2000MM - 1206434
DIN rail, material: Galvanized, unperforated, height 7.5 mm, width 35 mm, length: 2 m
DIN rail, unperforated - NS 35/ 7,5 CU UNPERF 2000MM - 0801762
DIN rail, material: Copper, unperforated, height 7.5 mm, width 35 mm, length: 2 m
End cap - NS 35/ 7,5 CAP - 1206560
DIN rail end piece, for DIN rail NS 35/7.5
02/09/2017 Page 7 / 18
https://www.phoenixcontact.com/us/products/3245040
N disconnect terminal block - UTN 10 - 3245040
Accessories
DIN rail perforated - NS 35/15 PERF 2000MM - 1201730
DIN rail, material: steel galvanized and passivated with a thick layer, perforated, height 15 mm, width 35 mm, length:
2000 mm
DIN rail, unperforated - NS 35/15 UNPERF 2000MM - 1201714
DIN rail, material: Steel, unperforated, height 15 mm, width 35 mm, length: 2 m
DIN rail perforated - NS 35/15 WH PERF 2000MM - 0806602
DIN rail 35 mm (NS 35)
DIN rail - NS 35/15 WH UNPERF 2000MM - 1204135
DIN rail 35 mm (NS 35)
DIN rail, unperforated - NS 35/15 AL UNPERF 2000MM - 1201756
DIN rail, deep drawn, high profile, unperforated, 1.5 mm thick, material: aluminum, height 15 mm, width 35 mm, length
2000 mm
02/09/2017 Page 8 / 18
https://www.phoenixcontact.com/us/products/3245040
N disconnect terminal block - UTN 10 - 3245040
Accessories
DIN rail perforated - NS 35/15 ZN PERF 2000MM - 1206599
DIN rail, material: Galvanized, perforated, height 15 mm, width 35 mm, length: 2 m
DIN rail, unperforated - NS 35/15 ZN UNPERF 2000MM - 1206586
DIN rail, material: Galvanized, unperforated, height 15 mm, width 35 mm, length: 2 m
DIN rail, unperforated - NS 35/15 CU UNPERF 2000MM - 1201895
DIN rail, material: Copper, unperforated, 1.5 mm thick, height 15 mm, width 35 mm, length: 2 m
End cap - NS 35/15 CAP - 1206573
DIN rail end piece, for DIN rail NS 35/15
DIN rail, unperforated - NS 35/15-2,3 UNPERF 2000MM - 1201798
DIN rail, unperforated, Width: 35 mm, Height: 15 mm, Length: 2000 mm, Color: silver
End block
02/09/2017 Page 9 / 18
https://www.phoenixcontact.com/us/products/3245040
N disconnect terminal block - UTN 10 - 3245040
Accessories
End clamp - CLIPFIX 35 - 3022218
Quick mounting end clamp for NS 35/7,5 DIN rail or NS 35/15 DIN rail, with marking option, width: 9.5 mm, color: gray
End clamp - CLIPFIX 35-5 - 3022276
Quick mounting end clamp for NS 35/7,5 DIN rail or NS 35/15 DIN rail, with marking option, with parking option for
FBS...5, FBS...6, KSS 5, KSS 6, width: 5.15 mm, color: gray
End clamp - E/NS 35 N - 0800886
End clamp, width: 9.5 mm, color: gray
End clamp - E/UK - 1201442
End clamp, Width: 9.5 mm, Height: 35.3 mm, Length: 50.5 mm, Color: gray
End clamp - E/UK 1 - 1201413
End clamps, for supporting the ends of double-level and three-level terminal blocks, width: 10 mm, color: gray
End cover
02/09/2017 Page 10 / 18
https://www.phoenixcontact.com/us/products/3245040
N disconnect terminal block - UTN 10 - 3245040
Accessories
End cover - D-UTN 2,5/10 - 3245079
Cover, for the UTN 2,5, UTN 4, UTN 6, UTN 10 terminal blocks
Insulating sleeve
Insulating sleeve - MPS-IH WH - 0201663
Insulating sleeve, Color: white
Insulating sleeve - MPS-IH RD - 0201676
Insulating sleeve, Color: red
Insulating sleeve - MPS-IH BU - 0201689
Insulating sleeve, Color: blue
Insulating sleeve - MPS-IH YE - 0201692
Insulating sleeve, Color: yellow
02/09/2017 Page 11 / 18
https://www.phoenixcontact.com/us/products/3245040
N disconnect terminal block - UTN 10 - 3245040
Accessories
Insulating sleeve - MPS-IH GN - 0201702
Insulating sleeve, Color: green
Insulating sleeve - MPS-IH GY - 0201728
Insulating sleeve, Color: gray
Insulating sleeve - MPS-IH BK - 0201731
Insulating sleeve, Color: black
Jumper
Plug-in bridge - FBS 2-10 - 3005947
Plug-in bridge, Pitch: 10.2 mm, Number of positions: 2, Color: red
Plug-in bridge - FBS 5-10 - 3005948
Plug-in bridge, Pitch: 10.2 mm, Number of positions: 5, Color: red
02/09/2017 Page 12 / 18
https://www.phoenixcontact.com/us/products/3245040
N disconnect terminal block - UTN 10 - 3245040
Accessories
Labeled terminal marker
Zack marker strip - ZB 10 CUS - 0824941
Zack marker strip, can be ordered: Strip, white, labeled according to customer specifications, Mounting type: Snap into
tall marker groove, for terminal block width: 10.2 mm, Lettering field: 10.15 x 10.5 mm
Zack marker strip - ZB10,LGS:FORTL.ZAHLEN - 1053014
Zack marker strip, Strip, white, labeled, can be labeled with: CMS-P1-PLOTTER, Printed horizontally: Consecutive
numbers 1 - 10, 11 - 20, etc. up to 991 - 1000, Mounting type: Snap into tall marker groove, for terminal block width: 10.2
mm, Lettering field: 10.15 x 10.5 mm
Zack marker strip - ZB10,QR:FORTL.ZAHLEN - 1053027
Zack marker strip, Strip, white, labeled, can be labeled with: CMS-P1-PLOTTER, Printed vertically: Consecutive numbers
1 - 10, 11 - 20, etc. up to 991 - 1000, Mounting type: Snap into tall marker groove, for terminal block width: 10.2 mm,
Lettering field: 10.15 x 10.5 mm
Zack marker strip - ZB10,LGS:GLEICHE ZAHLEN - 1053030
Zack marker strip, Strip, white, labeled, can be labeled with: CMS-P1-PLOTTER, Printed horizontally: Identical numbers
1 or 2, etc. up to 100, Mounting type: Snap into tall marker groove, for terminal block width: 10.2 mm, Lettering field:
10.15 x 10.5 mm
Marker for terminal blocks - ZB10,LGS:L1-N,PE - 1053412
Marker for terminal blocks, Strip, white, labeled, can be labeled with: CMS-P1-PLOTTER, Horizontal: L1, L2, L3, N, PE,
L1, L2, L3, N, PE, Mounting type: Snap into tall marker groove, for terminal block width: 10.2 mm, Lettering field: 10.15 x
10.5 mm
02/09/2017 Page 13 / 18
https://www.phoenixcontact.com/us/products/3245040
N disconnect terminal block - UTN 10 - 3245040
Accessories
Marker for terminal blocks - ZB10,LGS:U-N - 1053438
Marker for terminal blocks, Strip, white, labeled, can be labeled with: CMS-P1-PLOTTER, Horizontal: U, V, W, N, GND,
U, V, W, N, GND, Mounting type: Snap into tall marker groove, for terminal block width: 10.2 mm, Lettering field: 10.15 x
10.5 mm
Marker for terminal blocks - UC-TM 10 CUS - 0824605
Marker for terminal blocks, can be ordered: by sheet, white, labeled according to customer specifications, Mounting type:
Snap into tall marker groove, for terminal block width: 10.2 mm, Lettering field: 9.6 x 10.5 mm
Marker for terminal blocks - UCT-TM 10 CUS - 0829623
Marker for terminal blocks, can be ordered: by sheet, white, labeled according to customer specifications, Mounting type:
Snap into tall marker groove, for terminal block width: 10.2 mm, Lettering field: 8.9 x 9.6 mm
Neutral conductor rail
Neutral busbar - NLS-CU 3/10 SN 1000MM - 0402174
PEN conductor busbar, 3mm x 10 mm, length: 1000 mm
Partition plate
Partition plate - ATP-UT - 3047167
Partition plate, Length: 50 mm, Width: 2.2 mm, Height: 48 mm, Color: gray
02/09/2017 Page 14 / 18
https://www.phoenixcontact.com/us/products/3245040
N disconnect terminal block - UTN 10 - 3245040
Accessories
Pick-off terminal block
Power terminal block - EK 135 - 0401023
Power terminal block, Connection method Screw connection, Load current : 125 A, Cross section: 0.75 mm² - 35 mm²,
Width: 12 mm, Color: aluminum color
Power terminal block - EK 116 - 0401010
Power terminal block, Connection method Screw connection, Load current : 76 A, Cross section: 0.5 mm² - 16 mm²,
Width: 8 mm, Color: aluminum color
Pick-off terminal block - AGK 4-UT 10 - 3047112
Pick-off terminal block, Connection method: Screw connection, Cross section: 0.14 mm² - 6 mm², AWG: 26 - 10,
Width: 8.1 mm, Height: 24.7 mm, Color: gray, Mounting type: On base element
Screwdriver tools
Screwdriver - SZS 1,0X4,0 VDE - 1205066
Screwdriver, slot-headed, VDE insulated, size: 1.0 x 4.0 x 100 mm, 2-component grip, with non-slip grip
Support
02/09/2017 Page 15 / 18
https://www.phoenixcontact.com/us/products/3245040
N disconnect terminal block - UTN 10 - 3245040
Accessories
Support bracket - UAB - 3032428
Support bracket, Number of positions: 1, Width: 2 mm, Color: blue
Support bracket - AB/NS - 1201141
Support bracket, for insulated mounting of DIN rails in insulated systems, plastic, 21 mm high
Support bracket - AB-UTN 2,5/10 - 3245082
Support bracket, Bracket for busbars, set every 20 cm, Length: 58.4 mm, Width: 2.2 mm, Height: 46.9 mm, Number of
positions: 1, Color: blue
Terminal marking
Zack marker strip - ZB 10:UNBEDRUCKT - 1053001
Zack marker strip, Strip, white, unlabeled, can be labeled with: CMS-P1-PLOTTER, PLOTMARK, Mounting type: Snap
into tall marker groove, for terminal block width: 10.2 mm, Lettering field: 10.5 x 10.15 mm
Marker for terminal blocks - UC-TM 10 - 0818069
Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: BLUEMARK CLED, BLUEMARK LED, CMS-P1-
PLOTTER, PLOTMARK, Mounting type: Snap into tall marker groove, for terminal block width: 10.2 mm, Lettering field:
9.6 x 10.5 mm
02/09/2017 Page 16 / 18
https://www.phoenixcontact.com/us/products/3245040
N disconnect terminal block - UTN 10 - 3245040
Accessories
Marker for terminal blocks - UCT-TM 10 - 0829142
Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: THERMOMARK PRIME, THERMOMARK
CARD, BLUEMARK CLED, BLUEMARK LED, TOPMARK LASER, Mounting type: Snap into tall marker groove, for
terminal block width: 10.2 mm, Lettering field: 8.9 x 9.6 mm
Test plug terminal block
Test plugs - MPS-MT - 0201744
Test plugs, with solder connection up to 1 mm² conductor cross section, Color: silver
Additional products
Connection terminal block - AKG 16 BU - 0423014
Connection terminal block, Connection method Screw connection, Load current : 76 A, Cross section: 1.5 mm² - 16 mm²,
Width: 9.8 mm, Color: blue
Connection terminal block - AKG 35 BU - 0424013
Connection terminal block, Connection method Screw connection, Load current : 125 A, Cross section: 2.5 mm² - 35
mm², Width: 14.3 mm, Color: blue
Branch terminal - IAK 16 - 2715982
Branch terminal, Connection method Screw connection, Cross section: 0.5 mm² - 16 mm², Width: 7.7 mm, Color: gray
02/09/2017 Page 17 / 18
https://www.phoenixcontact.com/us/products/3245040
N disconnect terminal block - UTN 10 - 3245040
Accessories
Phoenix Contact 2017 © - all rights reserved
http://www.phoenixcontact.com
02/09/2017 Page 18 / 18
相关型号：
324530000
Thumb/Pushwheel Switch, Binary Coded Decimal, On-on, 10 Positions, 0.1A, 28VDC, Solder Lug Terminal, Thumbwheel Actuator, Panel Mount
ITT
©2020 ICPDF网 联系我们和版权申明