SACC-PG9-SEALCLM [PHOENIX]
Connector Accessory;型号: | SACC-PG9-SEALCLM |
厂家: | PHOENIX CONTACT |
描述: | Connector Accessory 连接器 连接器支架 |
文件: | 总1页 (文件大小:230K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Sensor/actuator cabling – PLUSCON field
Accessories
Accessories for the flush-type
connectors
Special fixing nuts are available for EMC-
compliant installation of M12 flush-type
connectors on coated or varnished housing
surfaces. When tightened, these cut
through the surface coating, thus
establishing a contact between the housing
and the connector.
Alternatively, flat seals can be used as a
seal between the housing panel and the
device connector. Flat seals must be
preferred in case of thin walls as the housing
cutouts need not be handled here.
Note:
For further technical data, see:
www.phoenixcontact.net/catalog
Pcs. /
Pkt.
Description
Type
Order No.
1440151
EMC hexagonal nuts with fine toothing, for all
1
2
flush-type connectors with:
EMC nut M12
SACC-M12-KD-NUT-SH
10
EMC hexagonal nuts with fine toothing, for all
flush-type connectors with:
EMC nut M16
SACC-M16-KD-NUT-SH
SACC-PG9-KD-NUT-SH
1440164
1440177
10
10
EMC nut Pg9
Flat seal for all flush-type connectors with:
3
M16 fastening thread
Pg9 fastening thread
SACC-M16-SEAL CLM
SACC-PG9-SEAL CLM
1430394
1556320
10
10
140 PHOENIX CONTACT
相关型号:
©2020 ICPDF网 联系我们和版权申明