LV4444FEV-170.0M-T500 [PLETRONICS]

LVDS Output Clock Oscillator;
LV4444FEV-170.0M-T500
型号: LV4444FEV-170.0M-T500
厂家: PLETRONICS, INC.    PLETRONICS, INC.
描述:

LVDS Output Clock Oscillator

文件: 总8页 (文件大小:1069K)
中文:  中文翻译
下载:  下载PDF数据表文档文件
LV44F / LV44G Series 3.3 V  
LVDS Clock Oscillators  
February 2016  
• Pletronics’ LV44F and LV44G Series is a quartz  
crystal controlled precision square wave  
generator with a fast rise and fall time LVDS  
output.  
• 3.2 x 2.5 mm LCC Ceramic Package  
• Enable/Disable Function on pad 1  
• Disable function includes low standby power  
mode  
• The package is designed for high density surface  
mount designs.  
• LV44F use Fundamental Mode Crystals  
13.5MHz to 110MHz  
rd  
• LV44G use 3 Overtone Crystals  
• Tape and Reel or cut tape packaging is available.  
35MHz to 170MHz  
• Low Jitter  
P R E L I M I N A R Y  
Pletronics Inc. certifies this device is in accordance with the  
RoHS 6/6 (2011/65/EC) and WEEE (2002/96/EC) directives.  
Pletronics Inc. guarantees the device does not contain the following:  
Cadmium, Hexavalent Chromium, Lead, Mercury, PBB’s, PBDE’s  
Weight of the Device: 0.16 grams  
Moisture Sensitivity Level: 1 As defined in J-STD-020D.1  
Second Level Interconnect code: e4  
Absolute Maximum Ratings:  
Parameter  
Unit  
V
Supply Voltage  
-0.5V to +5.0V  
CC  
Vi  
Input Voltage  
-0.5V to V + 0.5V  
CC  
Vo Output Voltage  
-0.5V to V + 0.5V  
CC  
o o  
-55 C to +150 C  
Junction Temperature (T )  
j
Thermal Characteristics  
o
The maximum die or junction temperature is 150 C  
o
The thermal resistance junction to board is 30 to 50 C/Watt depending on the solder pads, ground plane  
and construction of the PCB.  
Product information is current as of publication date. The product conforms  
to specifications per the terms of the Pletronics standard warranty. Production  
processsing does not necessarily include testing of all parameters.  
Copyright © 2011, Pletronics Inc.  
LV44F / LV44G Series 3.3 V  
LVDS Clock Oscillators  
February 2016  
Part Number:  
LV44 45  
G
E
V
-125.0M  
-XX  
Packaging code or blank  
T250 = 250 per Tape and Reel  
T500 = 500 per Tape and Reel  
T1K = 1000 per Tape and Reel  
Frequency in MHz  
Supply Voltage V  
CC  
V = 3.3V +_ 10%  
Optional Enhanced OTR  
o
Blank = Temp. range -10 to +70 C  
o
C = Temp. range -20 to +70 C  
o
E = Temp. range -40 to +85 C  
Series Model  
F = Fundamental mode crystal  
rd  
G = 3 Overtone mode crystal  
Frequency Stability  
45 = _+ 50 ppm  
44 = _+ 25 ppm  
20 = _+ 20 ppm  
Series Model  
Marking Legend:  
P ff.ff Lt  
PLE  
= Pletronics  
C YMDXXX  
ff.fff M = Frequency in MHz  
L
= LVDS  
t
= Mode of operation ‘F’ or ‘G’  
YMD  
= Date of Manufacture (year and week, or year-month-day)  
All other marking is internal factory codes  
Specifications such as frequency stability, supply voltage and operating temperature range, etc.  
are not identified from the marking. External packaging labels and packing list will correctly  
identify the ordered Pletronics part number.  
Codes for Date Code YMD  
Code  
Year  
Code  
4
5
6
7
8
A
B
C
D
E
F
G
H
J
K
L
M
Month  
2014 2015 2016 2017 2018  
JAN FEB MAR APR MAY JUN JUL AUG SEP OCT NOV DEC  
Code  
1
1
2
2
3
3
4
4
5
5
6
6
7
7
8
8
9
9
A
10  
U
B
11  
V
C
D
13  
X
E
14  
Y
F
15  
Z
G
Day  
Code  
Day  
12  
W
28  
16  
H
J
K
L
M
21  
N
P
R
T
17  
18  
19  
20  
22  
23  
24  
25  
26  
27  
29  
30  
31  
www.pletronics.com  
425-776-1880  
2
LV44F / LV44G Series 3.3 V  
LVDS Clock Oscillators  
February 2016  
Electrical Specification for 3.30V _+10% over the specified temperature range  
Item  
Min  
13.5  
35  
Typ  
Max  
110  
170  
+50  
+25  
+20  
2
Unit  
MHz  
MHz  
ppm  
Condition  
Frequency Range  
-
-
-
-
-
-
For “F” series devices  
For “G” series devices  
Frequency Accuracy 45"  
44"  
-50  
-25  
-20  
-2  
For all supply voltages, load changes,  
aging for 1 year, shock, vibration and  
temperatures  
20"  
Supply Voltage Sensitivity  
Output Waveform  
Output High Level (V  
ppm  
For V change of +_10%  
CC  
LVDS  
1.60  
-
1.375  
55  
)
-
0.90  
1.125  
45  
1.43  
volts  
volts  
volts  
%
See load circuit  
See load circuit  
OH  
Output Low Level (V )  
OL  
1.10  
Output Offset Voltage  
Output Symmetry  
Output Swing  
Jitter*  
-
-
350  
-
output crossing point  
See load circuit  
See load circuit  
250  
-
450  
0.6  
mV  
12 KHz to 20 MHz from the output  
frequency  
pS RMS  
-
-
-
-
2.8  
pS RMS 10 Hz to 1 MHz from the output frequency  
Output T  
and T  
150  
400  
pS  
Vth is 20% and 80% of waveform  
RISE  
FALL  
V
CC  
Supply Current (I )  
CC  
12  
16  
20  
27  
< 80MHz  
F” series  
mA  
$ 80MHz  
devices  
-
-
-
-
12  
16  
20  
24  
20  
27  
34  
40  
< 90MHz  
G” series  
devices  
$ 90 MHZ to 125MHz  
$ 125MHz to 160MHz  
$ 160MHz  
mA  
Disable current  
V disable  
-
-
-10  
-
0.9  
-
uA  
volts  
volts  
uA  
Pad 1 = 0.0 volts  
-
-
-
-
-
-
-
Referenced to pad 3  
Referenced to pad 3  
Pad 1 low, device disabled  
V enable  
2.1  
-10  
-10  
-
Output leakage V  
= V  
+10  
+10  
2
OUT  
CC  
V
= 0V  
uA  
OUT  
Enable time  
Disable time  
Start up time  
mS  
nS  
-
200  
2
Time for output to reach a high Z state  
-
mS  
Time for output to reach specified  
frequency  
o
Operating Temperature  
-10  
- 20  
- 40  
-55  
-
-
-
-
-
-
+70  
+70  
+85  
+125  
10  
C
Standard Temperature Range  
o
C
Extended Temperature Range C” Option  
Extended Temperature Range E” Option  
o
C
o
Storage Temperature  
C
Standby Current I  
uA  
Pad 1 low, device disabled  
CC  
* Measured at 125.0 MHz  
Specifications with Pad 1 E/D open circuit unless stated otherwise  
www.pletronics.com  
425-776-1880  
3
LV44F / LV44G Series 3.3 V  
LVDS Clock Oscillators  
February 2016  
Typical Phase-Noise Response  
Load Circuit  
Test Waveform  
www.pletronics.com  
425-776-1880  
4
LV44F / LV44G Series 3.3 V  
LVDS Clock Oscillators  
February 2016  
Reliability: Environmental Compliance  
Parameter  
Condition  
Mechanical Shock  
Vibration  
Solderability  
Thermal Shock  
MIL-STD-883 Method 2002, Condition B  
MIL-STD-883 Method 2007, Condition A  
MIL-STD-883 Method 2003  
MIL-STD-883 Method 1011, Condition A  
ESD Rating  
Model  
Minimum Voltage  
Conditions  
Human Body Model  
Charged Device Model  
1500  
1000  
MIL-STD-883 Method 3115  
JESD 22-C101  
Package Labeling  
Label is 1" x 2.6" (25.4mm x 66.7mm)  
Font is Courier New  
Label is 1" x 2.6" (25.4mm x 66.7mm)  
Font is Arial  
Bar code is 39-Full ASCII  
www.pletronics.com  
425-776-1880  
5
LV44F / LV44G Series 3.3 V  
LVDS Clock Oscillators  
February 2016  
Mechanical:  
Inches  
mm  
3.20 +_0.10  
2.50 +_0.10  
1.00 max  
1.60  
A
B
C
D
0.125 +_0.004  
0.098 +_0.004  
0.040 max  
0.063  
1
1
E
0.051  
1.30  
1
F
0.031  
0.80  
1
G
0.024  
0.60  
1
H
0.047  
1.20  
Contacts:  
1
Typical dimensions  
Gold 11.8 to 39.4 µinches (0.3 to 1.0µm)  
over  
Not to Scale  
Nickel 50 to 350 µinches (1.27 to 8.89 µm)  
Pad Function  
Note  
1
Output  
When this pad is not connected the oscillator shall operate.  
When this pad is < ‘V disable’, the output will be inhibited (high impedance  
state.)  
Enable/Disable  
Recommend connecting this pad to V if the oscillator is to be always on.  
CC  
2
3
4
5
6
No connect  
Ground (GND)  
Output  
There is no internal connection to this pad  
The outputs must be terminated, 100 ohms between the outputs is the ideal  
termination.  
Output*  
Supply Voltage  
Recommend connecting appropriate power supply bypass capacitors as  
close as possible.  
(V )  
CC  
Layout and application information  
Recommend connecting Pad 1 and Pad 2 together to permit the design to accept Enable/Disable  
input on either pad  
For Optimum Jitter Performance, Pletronics recommends:  
a ground plane under the device  
no large transient signals (both current and voltage) should be routed under the device  
do not layout near a large magnetic field such as a high frequency switching power supply  
do not place near piezoelectric buzzers or mechanical fans.  
www.pletronics.com  
425-776-1880  
6
LV44F / LV44G Series 3.3 V  
LVDS Clock Oscillators  
February 2016  
Reflow Cycle (typical for lead free processing)  
The part may be reflowed 3 times without degradation.  
Tape and Reel: available for quantities of 250 to 1000 per reel, cut tape for < 250  
Constant Dimensions Table 1  
T1  
Max  
Tape  
Size  
D1  
S1  
T
D0  
E1  
P0  
P2  
Min  
Min  
Max  
8mm  
12mm  
16mm  
24mm  
1.0  
1.5  
1.5  
1.5  
2.0  
_+0.05  
1.5  
1.75  
_+0.1  
4.0  
0.6  
0.6  
0.1  
+0.1  
-0.0  
_+0.1  
2.0  
_+0.1  
Variable Dimensions Table 2  
Tape  
Size  
B1  
E2 Min  
F
P1  
T2  
W
Ao, Bo  
& Ko  
Max  
Max  
Max  
16 mm  
12.1  
14.25  
7.5 _+0.1  
8.0 _+0.1  
8.0  
16.3  
Note 1  
Note 1: Embossed cavity to conform to EIA-481-B  
Dimensions in mm  
Not to scale  
REEL DIMENSIONS  
A
inches  
7.0  
177.8  
2.50  
63.5  
10.0  
13.0  
mm  
254.0  
330.2  
3.75  
95.3  
B
inches  
4.00  
mm  
101.6  
Tape  
Width  
C
D
mm  
13.0 +0.5 / -0.2  
mm  
16.4  
+2.0  
-0.0  
16.4  
+2.0  
-0.0  
16.4  
+2.0  
-0.0  
16.0  
Reel dimensions may vary from the above  
www.pletronics.com  
425-776-1880  
7
LV44F / LV44G Series 3.3 V  
LVDS Clock Oscillators  
February 2016  
IMPORTANT NOTICE  
Pletronics Incorporated (PLE) reserves the right to make corrections, improvements,  
modifications and other changes to this product at anytime. PLE reserves the right to discontinue  
any product or service without notice. Customers are responsible for obtaining the latest relevant  
information before placing orders and should verify that such information is current and complete.  
All products are sold subject to PLE’s terms and conditions of sale supplied at the time of order  
acknowledgment.  
PLE warrants performance of this product to the specifications applicable at the time of sale in  
accordance with PLE’s limited warranty. Testing and other quality control techniques are used to  
the extent PLE deems necessary to support this warranty. Except where mandated by specific  
contractual documents, testing of all parameters of each product is not necessarily performed.  
PLE assumes no liability for application assistance or customer product design. Customers are  
responsible for their products and applications using PLE components. To minimize the risks  
associated with the customer products and applications, customers should provide adequate  
design and operating safeguards.  
PLE products are not designed, intended, authorized or warranted to be suitable for use in life  
support applications, devices or systems or other critical applications that may involve potential  
risks of death, personal injury or severe property or environmental damage. Inclusion of PLE  
products in such applications is understood to be fully at the risk of the customer. Use of PLE  
products in such applications requires the written approval of an appropriate PLE officer.  
Questions concerning potential risk applications should be directed to PLE.  
PLE does not warrant or represent that any license, either express or implied, is granted under any  
PLE patent right, copyright, artwork or other intellectual property right relating to any  
combination, machine or process which PLE product or services are used. Information published  
by PLE regarding third-party products or services does not constitute a license from PLE to use  
such products or services or a warranty or endorsement thereof. Use of such information may  
require a license from a third party under the patents or other intellectual property of the third  
party, or a license from PLE under the patents or other intellectual property of PLE.  
Reproduction of information in PLE data sheets or web site is permissible only if the reproduction  
is without alteration and is accompanied by associated warranties, conditions, limitations and  
notices. Reproduction of this information with alteration is an unfair and deceptive business  
practice. PLE is not responsible or liable for such altered documents.  
Resale of PLE products or services with statements different from or beyond the parameters  
stated by PLE for that product or service voids all express and implied warranties for the  
associated PLE product or service and is an unfair or deceptive business practice. PLE is not  
responsible for any such statements.  
Contacting Pletronics Inc.  
Pletronics Inc.  
Tel: 425-776-1880  
th  
19013 36 Ave. West  
Fax: 425-776-2760  
Lynnwood, WA 98036-5761 USA  
E-mail: ple-sales@pletronics.com  
URL: www.pletronics.com  
Copyright © 2010, 2011 Pletronics Inc.  
www.pletronics.com  
425-776-1880  
8

相关型号:

LV4445GV-125.0M

LVDS Output Clock Oscillator,
PLETRONICS

LV4445GV-125.0M-T250

LVDS Output Clock Oscillator,
PLETRONICS

LV4445GV-125.0M-T500

LVDS Output Clock Oscillator,
PLETRONICS

LV450M180BP442545

Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 450V, 20% +Tol, 20% -Tol, 180uF, Through Hole Mount, ROHS COMPLIANT
YAGEO

LV450M270BPF-3535

Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 450V, 20% +Tol, 20% -Tol, 270uF, Through Hole Mount, ROHS COMPLIANT
YAGEO

LV450M56BPF-2225

Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 450V, 20% +Tol, 20% -Tol, 56uF, Through Hole Mount, ROHS COMPLIANT
YAGEO

LV450M82BP4-2235

Aluminum Electrolytic Capacitor, Polarized, Aluminum (wet), 450V, 20% +Tol, 20% -Tol, 82uF, Through Hole Mount, ROHS COMPLIANT
YAGEO

LV4512V

LV4512V
SANYO

LV47002

功放
ETC

LV47002P

IC,AUDIO AMPLIFIER,QUAD,ZIP,25PIN,PLASTIC
ONSEMI

LV47004

4-Channel BTL Power Amplifier
ETC

LV47004P

For Car Audio Systems 4-Channel BTL Power Amplifier
SANYO